Hoover UH70816, UH70819, UH70800, UH70801PC, UH70805 Owners Manual

...
0 (0)
Hoover UH70816, UH70819, UH70800, UH70801PC, UH70805 Owners Manual

OWNER’S MANUAL

Operating and Servicing Instructions

Español - página E1

www.hoover.com

IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.

Questions or concerns? For assistance, please call Customer Service at 1-800-944-9200 Mon-Fri 8am-7pm EST. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF USED COMMERCIALLY WARRANTY IS VOID.

©2012 Techtronic Floor Care Technology Limited. All Rights Reserved. #961151061 ID:105881 R1

Thank you for choosing a HOOVER® product.

Please enter the complete model and Manufacturing Code in the spaces provided.

MODEL

MFG. CODE

Hint: Attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER® product.

Be sure to register your product online at Hoover.com or call 1-800-944-9200 to register by phone. Visit Hoover. com for additional video instructions for assembly and maintenance.

MANUFACTURING CODE

(Label located on back of vacuum)

CONTENTS

 

Important Safety Instructions...........................................................................

3

Vacuum Assembly.............................................................................................

5

Carton Contents..............................................................................................

5

Attach Handle .................................................................................................

5

Attach Dirt Cup ...............................................................................................

5

Position Tools .................................................................................................

5

How To Use ........................................................................................................

6

Vacuum Description........................................................................................

6

On-Off Switch..................................................................................................

6

Cord Release..................................................................................................

6

Folding Handle................................................................................................

6

Carpet Height Adjustment...............................................................................

7

Tools ..................................................................................................................

7

Select Proper Tool ..........................................................................................

7

Removing Hose ..............................................................................................

7

Attach Wand And Tools ..................................................................................

7

Stair Cleaning .................................................................................................

8

Cord Storage ..................................................................................................

8

Cord Rewind And Storage ..............................................................................

8

How To Clean Tools .......................................................................................

8

Maintenance.......................................................................................................

8

Dirt Cup...........................................................................................................

9

Filters ..............................................................................................................

9

Brushroll..........................................................................................................

11

Hose................................................................................................................

11

Powered Hand Tool .......................................................................................

11

Headlight.........................................................................................................

12

Belt..................................................................................................................

12

Troubleshooting ................................................................................................

13

Service................................................................................................................

14

Warranty .............................................................................................................

15

If you need assistance:

Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® authorized dealer locations (U.S. only) or to speak with a customer service representative; MonFri 8am7pm EST.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. 2

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Fully assemble before operating.

Operate cleaner only at voltage specified on data label on back of cleaner.

Do not leave appliance when plugged in. Unplug from outlet when not in use and before cleaning or servicing.

Do not use outdoors or on wet surfaces.

Do not allow to be used as a toy. Not intended for use by children age 12 and under. Close supervision is necessary when used near children. To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings.

Use only as described in this manual. Use only manufacturer’s recommended attachments and products.

Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place product on cord. Do not run appliance over cord. Keep cord away from heated surfaces.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle plug or appliance with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brushroll continues to rotate when in the upright position.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage.

Do not use to pick up flammable or combustible liquids, such as gasoline, or fine wood sandings, or use in areas where they may be present.

Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding (cord rewind available on select models only).

Unplug before connecting Powered Hand Tool.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without Dirt Cup and/or Filters in place.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or reproductive harm. WASH HANDS AFTER HANDLING.

3

CAUTION: TO REDUCE THE RISK OF DAMAGE:

Avoid picking up hard, sharp objects with this product, as they may cause damage.

Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.

Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.

Do not use sharp objects to clean out hose as they can cause damage.

With brushroll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result.

WARNING:

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrican to install the proper outlet. Do not change the plug in any way.

4

1. VACUUM ASSEMBLY

CARTON CONTENTS

A.Handle*

B.Vacuum Base

C.Powered Hand Tool*

D.Powered Hand Tool Clip*

E.Crevice Tool

F.Dusting/Upholstery Tool*

G.Wand

H.Screw (for assembly)

I.Dirt Cup

*Varies per model

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing materials.

1.1

B

C

E

G

H

 

 

 

 

 

 

 

 

D

 

I

 

 

 

 

 

 

A

 

 

 

 

 

 

 

F

 

 

ATTACH HANDLE

1.2

1.3

(varies per model)

 

 

Note: Remove the screw located in the vacuum

 

 

base and set aside until instruction 1.3

 

 

1.2 Insert handle section into vacuum base. Push down firmly.

1.3 Using a Phillips screwdriver, fasten (1) screw behind handle into vacuum base.

ATTACH DIRT CUP

1.4

1.4 Place bottom of dirt cup into vacuum body first. Pivot cup into vacuum. Dirt cup is secure when you hear a click.

POSITION TOOLS

1.5

A

1.6

C

1.5 Secure Powered Hand Tool Clip (A) over

 

B

 

ridges on side of handle. Attach bottom of Powered

 

 

 

Hand Tool and pivot into clip until secure.

 

 

 

 

1.6 Place Crevice Tool into Wand and slide into tool storage area on left back side (B) of vacuum and place Upholstery Tool on right back side (C) of vacuum as shown.

5 Actual model may vary from images shown.

2. HOW TO USE

VACUUM DESCRIPTION

1.Handle**

2.Powered Hand Tool**

3.Dirt Cup Release Button

4.Carry Handle

5.Rinsable Filter Access

6.Dirt Cup

7.Automatic/Cord Rewind*

8.Filter made with HEPA media and Carbon Filter* Access

9.Stair Cleaning Handle

10.Headlight*

11.Height Adjustment

12.System Check Indicator

13.Crevice Tool

14.Wand

15.Hose

16.Cord Rewind Pedal*

17.Furniture Guard

18.Cord Release

19.Dusting/ Upholstery Tool**

20.ON/OFF Switch

21.Hose Release Button

22.Hose Tube

23.Handle Release Pedal

2.1

1

2

3

412

5 13

6

14

 

 

15

7

 

8

16

9

 

10

 

11

 

 

17

*Available on select models only **Varies per model

18

19

20

21

22

23

ON-OFF SWITCH

2.2

A

2.2 Plug cord into electrical outlet.

To turn vacuum ON, push ON/OFF switch

(A) once.

To turn vacuum OFF, push switch again.

! CAUTION !

Not to be used for grooming a pet.

CORD RELEASE

2.3

A

(Available on select models only)

2.3 Grasp the end of the plug and pull to release cord from cord reel until red tape is reached.

To return cord for storage, hold plug and press down Cord Release Pedal (A) on side of cord reel. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

IMPORTANT When pulling on the cord, yellow tape will

identify when the cord is almost fully extended. When red tape is visible on the cord, the cord has reached its full length. Do not pull the cord past the red tape.

Actual model may vary from images shown.

6

CARPET HEIGHT ADJUSTMENT

 

2.4

2.4 To adjust height setting, TURN knob (A) to

desired height setting.

A

For maximum cleaning performance, the following

 

carpet height settings are recommended:

 

• LOW setting for all types of carpet, for bare

 

floors turn dial to “Hard Floor” setting.

 

• Higher settings: for very deep pile carpet,

 

where easier pushing effort is desired, while

 

maintaining good cleaning performance.

 

IMPORTANT

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.

The vacuum is ready for tool use when handle is in upright position.

If the vacuum is difficult to push, push down and turn knob to the next higher setting.

3. TOOLS

IMPORTANT

Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.

SELECT PROPER TOOL

(Tools may vary per model)

3.1

 

A

B

 

C

 

 

D

A.Use Upholstery Tool to clean upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. (Tool varies per model)

B.Powered Hand Tool may be used for upholstered furniture, draperies, mattresses, clothing, and carpeted stairs. (Tool varies per model)

C.Wand is used to give extra length to your hose. Use it with any of the above tools.

D.Crevice Tool may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards.

REMOVING HOSE

ATTACH WAND AND TOOLS

3.2

To remove hose for tool

use, press the hose

 

release button and pull

 

hose end out.

 

To lock back into place,

 

push hose into hose

 

tube until you hear a

 

click.

! CAUTION !

Not to be used for grooming a pet.

3.3

!

 

WARNING

Unplug vacuum before connecting Powered Hand Tool.

To attach tool or wand to hose, push firmly into place.

7 Actual model may vary from images shown.

STAIR CLEANING

3.4Lift vacuum by Stair Cleaning Handle and position on stairs. Clean forward to back. Never leave the vacuum standing on stairs when not cleaning.

3.5Use the Hose and Powered Hand Tool (Tool varies per model) for stair cleaning. When using tools, always ensure handle is in upright position.

3.4

3.5

! CAUTION !

Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage. When using tools, always ensure handle is in upright position.

CORD STORAGE

(For units without cord reel)

2.3

2.3 Wrap cord around

hooks for convenient

 

storage. Attach the plug

 

end to the cord.

CORD REWIND AND STORAGE

(Available on select models only)

2.4

2.4 To return cord for

storage,

unplug

from

 

wall. Hold plug

and

A

press

down

Cord

Release

Pedal (A) on

 

side of cord reel.

 

! WARNING !

Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

HOW TO CLEAN TOOLS

To clean Hose and Powered Hand Tool, wipe with a damp cloth. DO NOT submerge in water.

Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using.

4. MAINTENANCE

Familiarize yourself with these home maintenance tasks as proper use and care

4.1

A

of your vacuum will ensure continued cleaning effectiveness.

 

4.1 The System Check Indicator located at (A), alerts you to possible system

 

 

performance issues.

 

 

 

 

 

If appliance is not working as it should, has been dropped, damaged, left

 

 

outdoors, or dropped into water, take it to a service center prior to continuing use.

 

 

 

 

 

 

 

 

 

 

 

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

 

 

 

 

 

If System Check

1. Rinsable filter and/or filter made

1.

Clean rinsable filter and/or filter made with

Indicator is red:

with HEPA media is dirty.

HEPA media - reference pg. 9

 

 

2. Dirt cup is full and/or clogged.

2.

Empty dirt cup - reference pg. 9

 

 

3. Brushroll and/or hose is

3.

Check hose for clogging - reference pg 11.

 

clogged.

Check brushroll for clogging - reference pg. 11.

 

 

 

 

 

 

Any other servicing should be done by an authorized service representative.

Actual model may vary from images shown.

8

! NOTICE !

A Thermal Protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates the cleaner will stop running.

If this happens proceed as follows:

1.Turn cleaner OFF and unplug it from the electrical outlet.

2.Empty dirt cup.

3.Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, Rinsable filter, and HEPA filter for any obstructions. Clear obstructions if present.

4.When cleaner is unplugged and motor has cooled for 30 minutes, the thermal protector will deactivate and cleaning may continue.

If the thermal protector continues to activate after following the above steps, your cleaner needs servicing.

DIRT CUP

When to Empty

4.2 To maintain optimal performance, empty the dirt cup before the dirt cup

4.2

reaches the max line, as indicated by arrow. Place the vacuum in the upright

position before removing the dirt cup.

 

! WARNING !

To reduce the risk of personal injury - Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

Very fine materials, such as face powder or cornstarch, may seal the filter and cause a reduction in performance. When using the vacuum for this type of dust, empty the cup and clean the filters often.

How to Empty

4.3Press dirt cup release button (A) and pivot cup out.

4.4Hold dirt cup over trash receptacle, push dirt cup door release lever (B) to open dirt cup door (C).

Close dirt cup door (C). Press firmly to secure at front.

4.3

A

4.4

B

C

4.5 Place bottom of dirt cup into vacuum body first. Pivot dirt cup into vacuum body and press firmly until it locks into place.

4.5

A

FILTERS: When to Clean

To maintain optimal performance, filters should be cleaned at least every two months under normal use.

Rinsable Filter: How to Clean

Remove dirt cup as described in Fig. 4.3.

4.6Pull up on dirt cup latch (A) to open.

4.7Pull on the fabric tab on filter to remove Rinsable Filter.

Hold filter under running water for two minutes to remove dirt and debris. Squeeze filter twice while underwater. Remove from water and squeeze a final time to remove excess water.

! WARNING !

To reduce the risk of personal injury - Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

4.6 4.7

A

B

 

9 Actual model may vary from images shown.

IMPORTANT

Allow filter to dry completely before replacing. Dry filter on edge so air circulates on both sides of filter. This may take up to 24 hours.

Replace filter, tab side out.

Close lid securely by pushing at (B) until it clicks as shown in Fig. 4.6.

Replace dirt cup as described in Fig 4.5.

Filter Made With HEPA Media: How to Clean

4.8 With fingers in slots, pull filter frame (A) straight out. Hold filter over a trash receptacle and tap out dirt and debris.

Slide back into position on vacuum.

What to Buy: Rinsable Filter

When used and maintained properly, your Rinsable Filter should not need replacement within the warranty period. If desired, additional filter is

available at Hoover.com or call 1-800-944-9200. Ask for Hoover® Part No. 304087001

! WARNING !

To reduce the risk of personal injury - Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

IMPORTANT

DO NOT RINSE OR WASH THE FILTER MADE WITH HEPA MEDIA.

What to Buy: Filter Made With HEPA Media

When used and maintained properly, your Filter should not need replacement

within the warranty period. If desired, additional filter is available at Hoover. com or call 1-800-944-9200. Ask for Hoover® Part No. 305687001.

4.8

A

Carbon Filter : How to Clean

(Available on select models only).

Your Carbon Filter is located on the underside of the Filter made with HEPA media.

IMPORTANT

DO NOT RINSE OR WASH the Carbon Filter.

What to Buy: Carbon Filter

Carbon Filter may need to be replaced more often to maintain optimal odor absorbing effectiveness. Additional filter is available at

Hoover.com or call 1-800-944-9200. Ask for Hoover® Part No. 902404001.

Cyclonic Filter Assembly: How to Clean

! WARNING !

To reduce the risk of personal injury - Unplug before cleaning or servicing. Do not use vacuum without dirt cup or filters in place.

Remove dirt cup as described in Fig. 4.3.

4.9Twist filter assembly (A) counterclockwise. Remove assembly from dirt cup.

4.10Dirt and debris can be cleaned from the filter assembly with the Dusting/ Upholstery Tool.

4.11Place the filter assembly on the dirt cup, aligning (3) tabs (A) on filter with (3) slots on dirt cup (B) and twist it clockwise to secure into position.

4.12The Hoover® emblem and center lines on the dirt cup should align on the front of the dirt cup (C) if assembled correctly.

Replace dirt cup as described in Fig. 4.5.

4.9

A

4.11

B

A

4.10

4.12

C

Actual model may vary from images shown.

10

Loading...
+ 21 hidden pages