Honeywell XP CCB01-010BT, XP CCB-H-010BT-BF, XP CCB01-010BT-BF, XP 1952-BF, XP 1952G User Manual

Xenon™ XP 1952g/1952g-BF CCB01-010BT/CCB01-010BT-BF CCB-H-010BT/CCB-H-010BT-BF

Cordless Area-Imaging Scanner and Charge Bases

Quick Start Guide

1952-52BF-EN-QS-01 Rev (a)

Agency Model: 1952/1952-BF/ CCB-H-010BT/ CCB-H-010BT-BF

Note: Refer to your User Guide for information about cleaning your device.

Getting Started

Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. The green LED on the base flashes

to indicate the scanner’s battery or charge pack is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

1

Connecting the

USB:

Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster.

CCB01-010BT or CCB01-010BT-BF Base:

CCB-H-010BT or CCB-H-010BT-BF Base:

2

Keyboard Wedge:

CCB01-010BT or CCB01-010BT-BF Base:

CCB-H-010BT or CCB-H-010BT-BF Base:

3

RS232 Serial Port:

CCB01-010BT or CCB01-010BT-BF Base:

CCB-H-010BT or CCB-H-010BT-BF Base:

4

RS485:

CCB01-010BT or CCB01-010BT-BF Base:

CCB-H-010BT or CCB-H-010BT-BF Base:

5