Honeywell HD3MDIH, HD3MDIHX User Manual

0 (0)

EQUIP® Series

Indoor High Resolution

True Day/Night

IP Dome Camera

NTSC / PAL

HD3MDIH HD3MDIHX

User Guide

Document 800-07361 – Rev A – 12/10

Revisions

Issue

Date

Revisions

 

 

 

A

12/10

New document for the HD3MDIH/X model for the HD3 EQUIP Series IP Dome

 

 

Camera.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Contents

Figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

About This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Overview of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Manufacturer’s Declaration of Conformance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 North America. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Warranty and Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

2 Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Overview of Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Camera Components and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Camera Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Preparing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Preparing the Mounting Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Connecting the Wires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Mounting the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Restore Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Adjusting the Camera FOV (Field of View) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Adjusting the Lens Focus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Securing the Enclosure Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

3 Installing the Honeywell IP Utility and Web-Client Software . . . . . . . . . . . . . . . . . . . . 29

About the Honeywell IP Utility and Web-Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

About the Honeywell IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

About the Web-Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

User Profiles: Honeywell IP Utility and Web-Client . . . . . . . . . . . . . . . . . . . . . . . .

30

Step 1: Confirm Your System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Step 2: Install the Honeywell IP Utility Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Downloading the EQUIP Series Installation Guides . . . . . . . . . . . . . . . . . . . . . . .

32

Step 3: Log Onto the IP Utility and Discover Network Devices . . . . . . . . . . . . . . . . . . . . . .

33

Step 4: Connect to a Device and Configure Network Settings . . . . . . . . . . . . . . . . . . . . . .

35

Connecting to or Disconnecting From Devices . . . . . . . . . . . . . . . . . . . . . . . . .

35

Configuring the IP Network Settings Automatically or Manually. . . . . . . . . . . . . . . . .

35

Interfacing with the EQUIP Device Via a Network Video Recorder . . . . . . . . . . . . . . .

38

Document 800-07361 – Rev A – 12/10

3

Contents

 

Step 5: Launch the Web-Client to View Live Video . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 38

 

Uninstalling IP Utility, Bonjour or the ActiveX Plug-in Software . . .

. . . . . . . . . . . . . . . . . . . 40

 

Uninstalling IP Utility Using the Start Menu . . . . . . . .

. . . . . . . . . . . . . . . . . . . 40

 

Uninstalling IP Utility or IP ActiveX Using the Control Panel

. . . . . . . . . . . . . . . . . . . 41

4

IP Camera Web-Client . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . 43

 

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 43

 

User Profiles . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 44

 

Logging On and Off the IP Web-Client . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 44

 

Launching the Web-Client from IP Utility . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 45

 

Logging Onto the Web-Client from Internet Explorer . . .

. . . . . . . . . . . . . . . . . . . 46

 

Logging Out of the Web-Client . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 46

 

Navigating the Web-Client User Interface . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 47

 

Live View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 48

 

Taking a SnapShot . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 49

 

Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 49

 

Configuring IP and Firmware Settings . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 49

 

Resetting the Device . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 50

 

Compression Settings . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 51

 

Video Codec Settings Tab . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 52

 

Statistics: Received Bit Rate and Frame Rate . . . . . . .

. . . . . . . . . . . . . . . . . . . 54

 

Camera Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 54

 

Auto Exposure . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 55

 

White Balance. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 56

 

Video Analytics . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 57

 

Sabotage Detection. . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 58

 

Configuring Video Motion Detection . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 61

 

Alarm and Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 62

 

Alarm Settings . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 62

 

Audio Settings . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . 63

Appendix A Surface Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Appendix B Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Problem: Lens Out of Optical Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Problem: Live View Does Not Display the Expected Video . . . . . . . . . . . . . . . . . . . . . . . . 68 Problem: Cannot Connect to a Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Appendix C

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . 69

Appendix D

Glossary . . . . . . . . . .

. .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . .

73

Index . . . . . . . . . . . . . . . . . . . . . .

. .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

75

4

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Figures

 

Figure 2-1

HD3MDIH/X Series Camera Components. . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Figure 2-2

Surface Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Figure 2-3

Audio and Alarm PINs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Figure 2-4

Normal Alarm States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Figure 2-5

Alarm Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Figure 2-6

Camera and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Figure 2-7

Wiring Connection Shown on Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Figure 2-8

Gimbal Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Figure 2-9

Installing the Enclosure Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Figure 3-1

Accessing Your Installation Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 3-2

Honeywell IP Utility Log On Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 3-3

Honeywell IP Utility User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

Figure 3-4

Set the IP Network Settings Automatically or Manually . . . . . . . . . . . . . . . . . . . .

36

Figure 3-5

ActiveX Prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

Figure 3-6

Web-Client Interface After Logging On . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Figure 4-1

Launching the Web-Client from the IP Utility . . . . . . . . . . . . . . . . . . . . . . . . .

45

Figure 4-2

Web-Client Window Layout: Administrator Log On . . . . . . . . . . . . . . . . . . . . . .

47

Figure 4-3

Web-Client: Administrator User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

Figure 4-4

Web-Client: Guest User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

Figure 4-5

Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Figure 4-6

IP and Firmware Settings: Device Information Tab . . . . . . . . . . . . . . . . . . . . . .

50

Figure 4-7

Compressions Settings Tab: Primary Stream . . . . . . . . . . . . . . . . . . . . . . . . .

51

Figure 4-8

Video Codec Settings Tab Available Functions . . . . . . . . . . . . . . . . . . . . . . .

52

Figure 4-9

Video Codec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

Figure 4-10

Camera Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

Figure 4-11

Video Analytics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

Figure 4-12

Tamper Detection Settings on the Video Analytics Tab. . . . . . . . . . . . . . . . . . . .

58

Figure 4-13

Video Analytics Alarm Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

Figure 4-14

Video Analytics: Defining a Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61

Figure 4-15

Audio and IO Settings Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

62

Figure 4-16

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

Figure B-1

Limited or No Connection Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

Figure C-1

HD3MDIH/X Camera Side View with Dimensions . . . . . . . . . . . . . . . . . . . . . . .

71

Figure C-2

HD3MDIH/X Camera Side View Dimensions without Skirt . . . . . . . . . . . . . . . . . .

71

Document 800-07361 – Rev A – 12/10

5

Figures

Figure C-3 HD3MDIH/X Camera Side View Dimensions with Adapter Plate . . . . . . . . . . . . . . . 71 Figure C-4 HD3MDIH/X Camera Bottom View with Dimensions . . . . . . . . . . . . . . . . . . . . . 72

6

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Tables

 

 

Table 1-1

Fixed Mini Dome Network Camera Model Numbers . . . . . . . . . . . . . . . . . . . . . .

13

Table 2-1

Audio and Alarm Connector PIN Definitions . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Table 3-1

User Profiles for Honeywell IP Utility and the Web-Client . . . . . . . . . . . . . . . . . . .

30

Table 3-2

PC Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Table 3-3

Items Installed On Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Table 3-4

IP Network Device Setting Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Table 4-1

User Roles and Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Table 4-2

Tabs/Views in the Web-Client Application . . . . . . . . . . . . . . . . . . . . . . . . . . .

47

Table 4-3

Video Streaming Resolutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

Table 4-4

Compression Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52

Table 4-5

Auto Exposure Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

Table 4-6

White Balance Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

Table 4-7

Blur Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

Table 4-8

Blinding Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60

Table 4-9

Scene Change Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60

Document 800-07361 – Rev A – 12/10

7

Tables

8

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

About This Document

This document introduces the Honeywell HD3MDIH/X Indoor High Resolution True Day/Night IP Dome Camera. It covers how to install and operate your camera in a network environment.

This document is intended for system installers, administrators, and operators.

Overview of Contents

This document contains the following chapters and appendixes:

Chapter 1, Introduction, introduces your HD3MDIH/X camera and gives a functional overview of its components.

Chapter 2, Installation and Setup, provides procedures for installing cameras, adjusting the lens, and setting up a network camera environment.

Chapter 3, Installing the Honeywell IP Utility and Web-Client Software, describes how to install the Honeywell IP Utility and set up administrator privileges.

Chapter 4, IP Camera Web-Client, describes how to use the Web-Client application to view video and configure the available settings for the network camera.

Appendix A, Surface Mounting Template, provides a mounting template for your HD3MDIH/X camera.

Appendix B, Troubleshooting, lists common problems encountered when setting up the network camera.

Appendix C, Specifications, provides specifications for your HD3MDIH/X camera.

Appendix D, Glossary, explains terms and initializations used in this guide.

The Index provides quick access to commonly searched terms.

Document 800-07361 – Rev A – 12/10

9

Cautions and Warnings

 

 

 

 

 

 

THIS SYMBOL INDICATES

 

CAUTION

 

 

 

 

 

 

 

 

THAT DANGEROUS VOLTAGE

 

RISK OF

 

 

 

 

CONSTITUTING A RISK OF

 

ELECTRICSHOCK

 

 

 

 

 

 

 

 

 

ELECTRIC SHOCK IS

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

PRESENT WITHIN THE UNIT.

 

 

 

 

 

 

 

 

 

 

CAUTION: TO REDUCE THE RISK OF

 

 

THIS SYMBOL INDICATES

ELECTRIC SHOCK, DO NOT REMOVE

 

 

THAT IMPORTANT OPERATING

 

THE COVER. NO USER-SERVICEABLE

 

 

AND MAINTENANCE

PARTS INSIDE. REFER SERVICING TO

 

 

INSTRUCTIONS ACCOMPANY

QUALIFIED SERVICE PERSONNEL.

 

 

THIS UNIT.

 

 

 

 

 

 

 

Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty.

WARNING!

24 VAC models require the use of CSA Certified/UL Listed

 

Class 2 power adapters to ensure compliance with

 

electrical safety standards. Power over Ethernet (PoE)

 

should meet the IEEE 802.3 af PoE standard.

 

 

WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product (applicable in the European Union and other European countries with separate collection systems). This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.

Caution When powering the camera from 24 VAC, a UPS source should be considered to ensure satisfactory performance.

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant to Part 15B of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

10

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference. For example, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to an outlet on a different circuit.

Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Manufacturer’s Declaration of Conformance

North America

The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No. 60950-1.

Europe

The manufacturer declares that the equipment supplied with this guide is compliant with the essential protection requirements of the EMC directive 2004/108/EC and the General Product Safety Directive 2001/95/EC, conforming to the requirements of standards EN 55022 for emissions, EN 50024 for immunity, and EN 60950 for Electrical Equipment safety.

Warranty and Service

Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid.

In the event you have a problem with any Honeywell product, please call Customer

Service at 1.800.796.CCTV for assistance or to request a Return Merchandise

Authorization (RMA) number.

Document 800-07361 – Rev A – 12/10

11

Be sure to have the model number, serial number, and the nature of the problem available for the technical service representative.

Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may be refused.

12

1

Introduction

The Honeywell HD3MDIH/X Indoor High Resolution True Day/Night IP Dome Camera provides high quality video surveillance over a network connection. See Table 1-1 for descriptions of the camera models.

Table 1-1

Fixed Mini Dome Network Camera Model Numbers

 

 

 

Model number

Description

 

 

 

 

 

HD3MDIH

 

True Day/Night 720p, 3.3

– 12 mm VFAI Lens, NTSC

 

 

 

 

HD3MDIHX

 

True Day/Night 720p, 3.3

– 12 mm VFAI Lens, PAL

 

 

 

 

Features

The HD3MDIH/X camera features:

720p (1280 x 720) resolution

1/4" color CMOS progressive scan sensor

Moveable Infrared (IR) cut filter ensures excellent low light performance

Camera Sabotage Detection

Video Motion Detection

H.264 and MJPEG compression

Dual digital video streams simultaneously, independently configurable

Remote firmware updates

Support of both Dynamic and Static IP address assignment

Multiple levels of password protected remote access prevents unauthorized users from altering system settings

Advanced IP locator software to make system setup easy

Web server for remote setup of camera video and network parameters

24 VAC or PoE IEEE 802.3 af choice of power inputs

Input and output alarm contacts support

Bi-directional audio support

Local video out – aim and focus

Document 800-07361 Rev A

13

12/10

 

Introduction

14

2

Installation and Setup

This chapter describes how to:

Mount the camera

Adjust the camera for the clearest image

Set up the camera in a network system

Before You Begin

Before installing the camera, Honeywell recommends that you:

Carefully read this guide and keep it for future reference.

Check www.honeywellvideo.com/products/cameras/index.html to find your camera, then download the latest manuals and software updates.

Unpack Everything

Check that the items received match those listed on the order form and packing slip. The HD3MDIH/X camera packing box should include, in addition to a Quick Install Guide:

One fully-assembled HD3MDIH/X camera, including factory-installed BNC connector for local video out aim and focus

One adapter plate

One HD3MDIH/X camera hardware kit that includes mounting screws and screw caps

One BNC cable for local video out - aim and focus

One mounting template

One product warranty

One CD containing the software and this User Guide

If any parts are missing or damaged, contact the dealer from which you purchased your camera or call Honeywell Customer Service (see Warranty and Service).

Document 800-07361 Rev A

15

12/10

 

Installation and Setup

Equipment Required

The following tools might help you to complete the installation:

Drill

Screwdrivers

Wire cutters

Overview of Installation Procedure

Note Please familiarize yourself with the installation procedure and complete each step in the exact sequence given.

The initial installation of your HD3MDIH/X camera consists of the following steps:

 

Step

See …

 

 

 

1

Preparation

page 18

 

 

 

2

Connect the wiring.

page 21

 

 

 

 

Mount the camera.

page 24

 

 

 

3

Adjust the camera angle, position, and

page 25

 

focus for optimum image.

 

 

 

 

4

Secure the enclosure cover.

page 27

 

 

 

5

Program the camera.

page 54

 

 

 

16

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Camera Components and Functions

Your Honeywell HD3MDIH/X camera consists of a fully-integrated enclosure with camera and lens. The wiring can be completely concealed to reduce the risk of tampering.

Figure 2-1 HD3MDIH/X Series Camera Components

 

 

Cover plate

Flush Mount

Back box

Surface Mount

 

 

(not supplied)

 

 

 

Skirt

 

Adapter plate

 

 

 

Base

Camera

 

 

 

 

Interface board

 

 

Gimbal base

 

Gimbal assembly

 

Turret (bubble insert)

 

Dome bubble

 

Document 800-07361 Rev A

 

17

12/10

 

 

Installation and Setup

Camera Installation

Preparing the Camera

1.Rotate the dome bubble counterclockwise until it disconnects.

2.Pull the turret to remove it.

3.Rotate the camera counterclockwise until it disconnects from the skirt.

4.Set aside the dome bubble, turret, and camera.

Skirt

Camera

Turret

Dome bubble

Preparing the Mounting Surface

1.Mark the mounting surface for screw holes and wire access hole.

Use the mounting template if you are surface mounting your camera. See Surface Mounting Template on page 65

Use the flush mount adapter plate as a template if you are flush mounting your camera.

Figure 2-2 Surface Mounting Template

Drill these holes for the mounting screws.

Cut this hole, then pull the

power, audio, and alarm wires through it.

18

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

2.Pre-drill the holes as indicated on the template, using the recommended hole size for the screws being used.

Note Other fasteners (preferably stainless steel) can be used, provided they are not larger than the screw holes on the mounting template.

Connecting the Wires

Caution Installation must be performed by a qualified electrician. The power wire size for the distance and the number of cameras must be determined to maintain 24 VAC at each camera.

Connecting Audio and Alarms

1.Pull the wires through the ceiling or wall hole until you have at least 4 inches of wire.

2.Remove the green connector strip (see Figure 2-6 on page 22) from the camera base and make all the necessary alarm and audio connections.

3.Connect a twisted pair (UTP) cable from each peripheral alarm contact to each alarm input on the terminal block, as shown in Figure 2-3 and Table 2-1.

Figure 2-3 Audio and Alarm PINs

Power

1

2

3

4

5

6

7

8

Table 2-1 Audio and Alarm Connector PIN Definitions

PIN Definition

1Audio In +

2Audio In -

3Audio Out +

4Audio Out -

5Alarm In +

6Alarm In -

7Alarm Out +

8Alarm Out -

Document 800-07361 Rev A

19

12/10

 

Installation and Setup

Connecting Audio

Your network camera supports bi-directional audio. There are two supported voice band channels that function in full duplex mode. Your camera can transmit audio from the camera to the client (PC) using any audio source that provides an industry standard line level input (see the terminal strip as depicted in Figure 2-6). Your camera can also receive audio from the client (PC) and provide an industry standard line level output suitable to connect to audio devices. Audio input and output have 600 Ohm impedance. See Audio Settings on page 63 to configure audio options.

Connecting Alarms

WARNING!

Do not exceed the maximum rating of 12 VDC, 0.5 A on alarm

 

output connections.

 

 

Your HD3MDIH/X camera has one alarm input and one alarm output. Connect mechanical or electrical switches to the alarm input connection to allow event-triggered recording. When alarm inputs are configured, your HD3MDIH/X camera triggers an alarm only when the normal alarm state (open or closed) changes.

Figure 2-4 Normal Alarm States

Normally closed

 

Normally opened

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See Alarm Settings on page 62 to configure the alarm inputs.

Connect external devices such as sirens or flashing lights to the alarm output connector to signal an activated alarm to camera users.

Figure 2-5 Alarm Connection

Audio

Alarm

In Out

 

+

+

The alarm output can be configured to provide normally open or normally closed contacts (see Alarm Settings on page 62 to configure the alarm output). Contacts will be rated for 12 VDC @ 0.5 A.

20

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

4.Pull the cables through the back or side entries of the camera skirt, back box and/or adapter plate (as required), then connect the green connector strip to the camera assembly. You might have to remove the cover plate for flush mounting the camera.

Connecting Power

WARNING!

The use of a CSA Certified/UL Listed Class 2 power supply is

 

required to ensure compliance with electrical safety

 

standards.

 

 

Note Check the power source from the external power supply before applying power to the camera.

1.Connect the appropriate power supply for your installation:

24 VAC power supply (proceed to step 2) or

Power over Ethernet (IEEE 802.3af) 48 VDC power supply

Note If you are using PoE (802.3af), power will automatically be supplied to the camera through the network cable.

2.Connect to the power supply (see Figure 2-6 on page 22).

3.Plug the power supply into an appropriate power source. The LED on the RJ45 jack illuminates when the camera receives power. If it does not illuminate, check the terminal block connections and the power source.

Note To ensure satisfactory performance, it is recommended that you use a UPS source when connecting the camera to a 24 VAC power source.

Document 800-07361 Rev A

21

12/10

 

Honeywell HD3MDIH, HD3MDIHX User Manual

Installation and Setup

Figure 2-6 Camera and Cables

Back view of camera

24 VAC power

Figure 2-7 Wiring Connection Shown on Board

Factory reset button

Local video out connector (for aim and focus)

Inside view of camera

RJ45 Ethernet Connector

(see Connecting to a Network via an RJ-45 Ethernet Connector, page 23)

RJ45 Ethernet network connection (using 10Base T or 100Base TX cable). See

Connecting to a Network via an RJ-45 Ethernet Connector, page 23)

Also for Power over Ethernet (PoE 802.3af)

Connector Strip

Audio: Input/Output Alarm: Input/Output (see Connecting Alarms, page 20)

22

HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide

Connecting to a Video Monitor

The local video out (see Figure 2-7) is available as a test output and should be used as needed during installation to position, aim, and focus the camera. Use the provided BNC connector to connect the video from the camera to the video input connector on your video monitor.

Note If your installation involves a 24V AC power source, then please wait approximately 60 seconds after connecting to a power source for video to appear on the local video out.

Connecting to a Network via an RJ-45 Ethernet Connector

The main video connection for your HD3MDIH/X camera will be made through your Ethernet network connection. Connect the Ethernet connector on your camera to your network using an Ethernet (10Base-T, 100Base-TX) cable.

Note You can connect your camera to a network or use any type of CAT5 cable to connect it directly to a PC or laptop.

Document 800-07361 Rev A

23

12/10

 

Installation and Setup

Mounting the Camera

Surface Mount

1.Secure the skirt to the ceiling (hardware not supplied) or to the wall using the supplied screws.

Note You must use screws that are able to support at least three times the weight of the camera.

2.Connect the wires (see Connecting the Wires on page 19).

3.Rotate and align the camera assembly yellow label with the skirt yellow label.

4.Secure the camera assembly to the skirt by pushing it into the skirt, then twisting it clockwise until it clicks securely in place.

Skirt

Screws (supplied)

Camera assembly

Turret

Dome bubble

5.Secure the camera assembly to the skirt by twisting it clockwise until it clicks securely in place.

6.Adjust the camera’s field of view (see Adjusting the Camera FOV (Field of View) on page 25).

7.Install the turret by clicking it into place.

8.Install the bubble by placing it on the camera with the tabs to the left of the slots, then turning it clockwise until the tabs click securely into place.

24

Loading...
+ 56 hidden pages