Hobart HL661 User Manual

0 (0)
Hobart HL661 User Manual

Models

HL600, HL661 & HL662

ML-134145

ML-134218

ML-134219

I N S T R U C T I O N

M A N U A L

7 0 1 S . R I D G E A V E N U E T R O Y , O H I O 4 5 3 7 4 - 00 0 1 9 3 7 - 3 3 2 - 3 0 0 0 · W W W . H O B A R T C O R P . C O M

F O R M 3 4 8 0 0 Rev. B ( MARCH 2 0 0 3 )

LEGACY 60-QUART MIXER

– 2 –

 

TABLE OF CONTENTS

GENERAL .............................................................................................................................................

4

INSTALLATION ....................................................................................................................................

5

Unpacking .......................................................................................................................................

5

Location ...........................................................................................................................................

5

Electrical Connections ....................................................................................................................

6

OPERATION.........................................................................................................................................

7

Controls ...........................................................................................................................................

8

Bowl Placement ...........................................................................................................................

11

Agitator .........................................................................................................................................

11

Power Bowl Lift ............................................................................................................................

11

Prepare for Mixing ........................................................................................................................

12

Timer Operation ...........................................................................................................................

12

Operating Notes ...........................................................................................................................

13

Unloading......................................................................................................................................

14

Wire Cage.....................................................................................................................................

14

Agitators and Attachments

.......................................................................................................... 15

CLEANING .........................................................................................................................................

16

MAINTENANCE .................................................................................................................................

17

Lubrication ....................................................................................................................................

17

Adjustments ..................................................................................................................................

18

TROUBLESHOOTING ......................................................................................................................

20

Service .........................................................................................................................................

20

– 3 –

Installation, Operation and Care of

LegacyTM 60-Quart Mixers

SAVE THESE INSTRUCTIONS

GENERAL

The Legacy 60-quart mixer series are heavy-duty mixers which feature a 2.7-horsepower motor, digital SmartTM Timer, a power bowl lift and a #12 attachment hub as standard equipment.

The Legacy series is available in three models:

The HL600 is equipped with Stir, plus four mixing speeds.

The HL661 is equipped with one mixing speed.

The HL662 is equipped with two mixing speeds.

A 40-quart bowl and agitators are also available.

A variety of attachments, agitators and accessories are available. These are described in a separate Use and Applications Handbook, which is furnished on the Legacy Mixer Operator Training CD provided with each mixer.

– 4 –

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.

LOCATION

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate.

Place the mixer in its operating location. There should be adequate space around the mixer for the user to operate the controls and to install and remove bowls. The area above and to the right side of the mixer should allow the top and side covers to be removed for routine maintenance and servicing.

Once in position, the mixer must be leveled:

Remove the two top cover screws and the top cover.

Place a level on the top rim of the large pulley (Fig. 1). Slide shims under the base contact surface of the mixer as required to level it front-to-back and side-to-side.

Do not replace the top cover until installation is completed.

Fig. 1

Check Lubrication Before Use

This mixer is shipped with oil in the transmission. Check oil level before starting mixer. Refer to Lubrication on page 17 for applicable lubrication procedures.

– 5 –

ELECTRICAL CONNECTIONS

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES.

A hole for 3/4"-trade-size conduit is located at the top of the pedestal. Make electrical connections per the wiring diagram located on the inside of the top cover.

Single-Phase Mixer:

Connect field supply lead wires to L1 and L2.

Connect ground wire to ground lug on the mixer.

Cut off stripped portion of L3 on Legacy Mixer and wrap securely with electrical tape to insulate the exposed conductor.

Three-Phase Mixer:

Connect field supply lead wires to L1, L2 and L3.

Connect ground wire to ground lug on the mixer.

Check Initial Operation

1.Apply power to the mixer.

2.Turn the SPEED dial pointer to STIR for the HL600 and to 1 for the HL661 and HL662.

3.Install the bowl and lock into mix position, with the Bowl Support all the way up and bowl guard closed. Momentarily run the machine by pushing the START and then STOP buttons.

– 6 –

Loading...
+ 14 hidden pages