How it Works
show menu
Hitachi
Loading...
IC25N020ATMR04
Manual
4 pgs283.24 Kb0
Quick Installation Guide
2 pgs126.91 Kb0
Specifications
214 pgs985.69 Kb0
Table of contents
Loading...

Hitachi IC25N020ATMR04, IC25N030ATMR04, IC25N040ATMR04, IC25N060ATMR04, IC25N080ATMR04 Specifications

4 (1)
Hitachi Global Storage Technologies
Hard Disk Drive Specification
Hitachi Travelstar 80GN
2.5 inch ATA/IDE hard disk drive
Models: IC25N020ATMR04
IC25N030ATMR04 IC25N040ATMR04 IC25N060ATMR04 IC25N080ATMR04
Revision 2.0 19 September 2003
Hard Disk Drive Specification
Travelstar 80GN
2.5 inch ATA/IDE hard disk drive
Models: IC25N020ATMR04
IC25N030ATMR04 IC25N040ATMR04 IC25N060ATMR04 IC25N080ATMR04
Revision 2.0 19 September 2003
Hitachi Global Storage Technologies
1st Edition (Revision 0.1) Sxxx-xxxx-01 (1 December 2002) Preliminary 2nd Edition (Revision 0.2) Sxxx-xxxx-01 (27 Feburary 2003) Preliminary 3rd Edition (Revision 0.3) S13K-1055-03(7 March 2003) Preliminary 4th Edition (Revision 0.4) S13K-1055-04(7 March 2003) Preliminary 5th Edition (Revision 0.5) S13K-1055-05(7 March 2003) Preliminary 6th Edition (Revision 1.0) S13K-1055-10(7 March 2003) Revision 7th Edition (Revision 1.1) S13K-1055-11(13 March 2003) Revision 8th Edition (Revision 1.2) S13K-1055-12(17 June 2003) Revision 9th Edition (Revision 1.3) S13K-1055-13(18 June 2003) Revision 10th Edition (Revision 1.4) S13K-1055-14(26 June 2003) Revision 11th Edition (Revision 1.5) S13K-1055-15(14 July 2003) Revision 12th Edition (Revision 1.6) S13K-1055-16(29 August 2003) Revision 13th Edition (Revision 1.7) S13K-1055-17 (02 September 2003) Revision 14th Edition (Revision 2.0) S13K-1055-20 (19 September 2003) Final
The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: HITACHI GLOBAL STORAGE TECHNOLOGIES PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRES S OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the informa­tion herein; these changes will be incorporated in new editions of the publication. Hitachi may make improvements or changes in any products or programs described in this publication at any time.
It is possible that this publication may contain reference to, or information about, Hitachi products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Hitachi intends to announce such Hitachi products, programming, or services in your country.
T echnical information about this product is available by contacting your local Hitachi Global Storage Technologies representa­tive or on the Internet at http://www.hgst.com
Hitachi Global Storage Technologies may have patents or pending patent applications covering subject matter in this docu­ment. The furnishing of this document does not give you any license to these patents.
©Copyright Hitachi Globlal Storage Technologies
Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with Hitachi Global Storage Technologies.
Hitachi Global Storage Technologies
Table of Contents
1.0 General........................................................................................................................................5
1.1 Introduction............................................................................................................................5
1.2 References..............................................................................................................................5
1.3 Abbreviations.........................................................................................................................5
1.4 Caution...................................................................................................................................7
1.5 Drive handling precautions....................................................................................................8
2.0 Outline of the drive....................................................................................................................9
3.0 Fixed-disk subsystem description.............................................................................................13
3.1 Control electronics.................................................................................................................13
3.2 Head disk assembly data........................................................................................................13
4.0 Drive characteristics..................................................................................................................15
4.1 Formatted capacity.................................................................................................................15
4.2 Data sheet...............................................................................................................................15
4.3 Cylinder allocation.................................................................................................................16
4.4 Performance characteristics...................................................................................................17
4.4.1 Command overhead......................................................................................................17
4.4.2 Mechanical positioning.................................................................................................17
4.4.3 Operating modes...........................................................................................................19
5.0 Data integrity..............................................................................................................................21
5.1 Data loss at power off............................................................................................................21
5.2 Write Cache ...........................................................................................................................21
5.3 Equipment status....................................................................................................................21
5.4 WRITE safety ........................................................................................................................22
5.5 Data buffer test.......................................................................................................................22
5.6 Error recovery........................................................................................................................22
5.7 Automatic reallocation...........................................................................................................22
5.7.1 Nonrecovered write errors ............................................................................................22
5.7.2 Nonrecoverable read error ............................................................................................22
5.7.3 Recovered read errors...................................................................................................22
5.8 ECC........................................................................................................................................23
6.0 Specification ...............................................................................................................................25
6.1 Environment...........................................................................................................................25
6.1.1 Temperature and humidity............................................................................................25
6.1.2 Radiation noise .............................................................................................................26
6.1.3 Conductive noise...........................................................................................................27
6.1.4 Magnetic fields .............................................................................................................27
6.2 DC power requirements.........................................................................................................27
6.2.1 Power consumption efficiency......................................................................................28
6.3 Reliability...............................................................................................................................28
6.3.1 Data Reliability.............................................................................................................28
6.3.2 Failure prediction (S.M.A.R.T.) ...................................................................................28
6.3.3 Cable noise interference................................................................................................28
6.3.4 Service life and usage condition...................................................................................29
6.3.5 Preventive maintenance................................................................................................29
6.3.6 Load/unload ..................................................................................................................29
6.4 Mechanical specifications......................................................................................................31
6.4.1 Physical dimensions and weight...................................................................................31
6.4.2 Mounting hole locations ...............................................................................................32
6.4.3 Connector and jumper description................................................................................32
6.4.4 Mounting orientation ....................................................................................................33
6.4.5 Load/unload mechanism...............................................................................................33
6.5 Vibration and shock...............................................................................................................33
6.5.1 Operating vibration.......................................................................................................33
6.5.2 Nonoperating vibration.................................................................................................34
6.5.3 Operating shock............................................................................................................34
6.5.4 Nonoperating shock......................................................................................................35
6.6 Acoustics................................................................................................................................35
6.6.1 Sound power levels.......................................................................................................35
6.6.2 Discrete tone penalty ....................................................................................................36
6.7 Identification labels................................................................................................................36
6.8 Electromagnetic compatibility...............................................................................................36
6.8.1 CE mark........................................................................................................................36
6.8.2 C-TICK mark................................................................................................................36
6.8.3 BSMI mark ...................................................................................................................36
6.8.4 MIC mark......................................................................................................................37
6.9 Safety .....................................................................................................................................37
6.9.1 UL and CSA approval...................................................................................................37
6.9.2 IEC compliance.............................................................................................................37
6.9.3 German safety mark......................................................................................................37
6.9.4 Flammability.................................................................................................................37
6.9.5 Secondary circuit protection.........................................................................................37
6.10 Packaging.............................................................................................................................37
7.0 Electrical interface specification...............................................................................................39
7.1 Cabling...................................................................................................................................39
7.2 Interface connector.................................................................................................................39
7.3 Signal definitions...................................................................................................................40
7.4 Signal descriptions.................................................................................................................41
7.5 Interface logic signal levels ...................................................................................................44
7.6 Reset timings..........................................................................................................................44
7.7 PIO timings............................................................................................................................45
7.8 Multi word DMA timings......................................................................................................46
7.9 Ultra DMA timings................................................................................................................47
7.9.1 Initiating Read DMA ....................................................................................................47
7.9.2 Host Pausing Read DMA..............................................................................................48
7.9.3 Host Terminating Read DMA.......................................................................................49
7.9.4 Device Terminating Read DMA...................................................................................50
7.9.5 Initiating Write DMA ...................................................................................................51
7.9.6 Device Pausing Write DMA.........................................................................................52
Hitachi Global Storage Technologies
7.9.7 Device Terminating Write DMA..................................................................................53
7.9.8 Host Terminating Write DMA......................................................................................54
7.10 Drive address setting............................................................................................................55
7.11 Addressing of HDD registers...............................................................................................56
8.0 General........................................................................................................................................59
8.1 Introduction............................................................................................................................59
8.2 Terminology...........................................................................................................................59
9.0 Deviations from standard..........................................................................................................61
10.0 Register .....................................................................................................................................63
10.1 Alternate Status Register .....................................................................................................64
10.2 Command Register ..............................................................................................................64
10.3 Data Register........................................................................................................................64
10.4 Device Control Register......................................................................................................65
10.5 Drive Address Register........................................................................................................65
10.6 Device/Head Register .........................................................................................................66
10.7 Error Register.......................................................................................................................66
10.8 Features Register..................................................................................................................67
10.9 LBA High Register..............................................................................................................67
10.10 LBA Mid Register .............................................................................................................67
10.11 Sector Count Register........................................................................................................67
10.12 Status Register ...................................................................................................................67
11.0 General......................................................................................................................................69
11.1 Reset response......................................................................................................................69
11.2 Register initialization...........................................................................................................70
11.3 Diagnostic and Reset considerations ...................................................................................71
11.4 Power-off considerations.....................................................................................................72
11.4.1 Load/Unload ...............................................................................................................72
11.4.2 Emergency unload ......................................................................................................72
11.4.3 Required power-off sequence.....................................................................................72
11.5 Sector Addressing Mode......................................................................................................73
11.5.1 Logical CHS addressing mode ...................................................................................73
11.5.2 LBA addressing mode ................................................................................................73
11.6 Power management features................................................................................................74
11.6.1 Power mode ................................................................................................................74
11.6.2 Power management commands ..................................................................................74
11.6.3 Standby/Sleep command completion time .................................................................74
11.6.4 Standby timer..............................................................................................................75
11.6.5 Status...........................................................................................................................75
11.6.6 Interface capability for power modes .........................................................................75
11.6.7 Initial Power Mode at Power On ................................................................................75
11.7 Advanced Power Management (ABLE-3) feature...............................................................75
11.7.1 Performance Idle Mode ..............................................................................................76
11.7.2 Active Idle Mode ........................................................................................................76
11.7.3 Low Power Idle Mode ................................................................................................76
11.7.4 Transition time.........................................................................................................
11.8 S.M.A.R.T. Function ...........................................................................................................77
...76
11.8.1 Attributes ....................................................................................................................77
11.8.2 Attribute values...........................................................................................................77
11.8.3 Attribute thresholds.....................................................................................................77
11.8.4 Threshold exceeded condition ....................................................................................77
11.8.5 S.M.A.R.T. commands ...............................................................................................77
11.8.6 S.M.A.R.T. operation with power management modes..............................................78
11.9 Security Mode Feature Set...................................................................................................78
11.9.1 Security mode .............................................................................................................78
11.9.2 Security level ..............................................................................................................78
11.9.3 Password.....................................................................................................................79
11.9.4 Master Password Revision Code ................................................................................79
11.9.5 Command table...........................................................................................................82
11.10 Protected Area Function ....................................................................................................83
11.10.1 Example for operation (In LBA Mode)....................................................................83
11.10.2 Set Max security extension commands.....................................................................84
11.11 Address Offset Feature (vendor specific)..........................................................................85
11.11.1 Enable/Disable Address Offset Mode.......................................................................85
11.11.2 Identify Device Data.................................................................................................86
11.11.3 Exceptions in Address Offset Mode........................................................................86
11.12 Seek Overlap......................................................................................................................87
11.13 Write Cache function.........................................................................................................87
11.14 Reassign Function..............................................................................................................88
11.14.1 Auto Reassign Function...........................................................................................88
11.15 48-bit Address Feature Set................................................................................................89
12.0 Command protocol ..................................................................................................................91
12.1 Data In commands ...............................................................................................................91
12.2 Data Out Commands............................................................................................................92
12.3 Non-data commands ...........................................................................................................93
12.4 DMA Data Transfer commands:.........................................................................................95
13.0 Command descriptions............................................................................................................97
13.1 Check Power Mode (E5h/98h) ............................................................................................101
13.2 Device Configuration Overlay (B1h) ..................................................................................102
13.2.1 DEVICE CONFIGURATION RESTORE (subcommand C0h) ...............................102
13.2.2 DEVICE CONFIGURATION FREEZE LOCK (subcommand C1h)........................102
13.2.3 DEVICE CONFIGURATION IDENTIFY (subcommand C2h)...............................103
13.2.4 DEVICE CONFIGURATION SET (subcommand C3h)...........................................103
13.3 Execute Device Diagnostic (90h) ........................................................................................105
13.4 Flush Cache (E7h) ...............................................................................................................106
13.5 Flush Cache EXT (EAh)......................................................................................................107
13.6 Format Track (50h: vendor specific) ...................................................................................108
13.7 Format Unit (F7h: vendor specific) .....................................................................................109
13.8 Identify Device (ECh)..........................................................................................................110
13.9 Idle (E3h/97h).....................................................................................................................119
13.10 Idle Immediate (E1h/95h)..................................................................................................120
13.11 Initialize Device Parameters (91h).....................................................................................122
13.12 Read Buffer (E4h)..............................................................................................................123
Hitachi Global Storage Technologies
13.13 Read DMA (C8h/C9h).......................................................................................................124
13.14 Read DMA EXT (25h) ......................................................................................................126
13.15 Read Long (22h/23h).........................................................................................................128
13.16 Read Multiple (C4h)..........................................................................................................130
13.17 Read Multiple EXT (29h)..................................................................................................132
13.18 Read Native Max ADDRESS (F8h)..................................................................................133
13.19 Read Native Max ADDRESS EXT (27h)..........................................................................134
13.20 Read Sectors (20h/21h)......................................................................................................135
13.21 Read Sector(s) EXT (24h) .................................................................................................136
13.22 Read Verify Sectors (40h/41h) ..........................................................................................138
13.23 Ready Verify Sector(s) EXT (42h)....................................................................................140
13.24 Recalibrate (1xh)................................................................................................................142
13.25 Security Disable Password (F6h).......................................................................................143
13.26 Security Disable Password (F6h).......................................................................................144
13.27 Security Erase Unit (F4h) ..................................................................................................145
13.28 Security Freeze Lock (F5h) ...............................................................................................147
13.29 Security Set Password (F1h)..............................................................................................148
13.30 Security Unlock (F2h) .......................................................................................................150
13.31 Seek (7xh).........................................................................................................................151
13.32 Sense Condition (F0h: vendor specific).............................................................................152
13.33 Set Features (EFh) .............................................................................................................153
13.34 Set Max ADDRESS (F9h).................................................................................................155
13.35 Set Max ADDRESS EXT (37h) ........................................................................................157
13.36 Set Multiple (C9h) .............................................................................................................159
13.37 Sleep (E6h/99h) .................................................................................................................160
13.38 S.M.A.R.T. Function Set (B0h).........................................................................................161
13.38.1 S.M.A.R.T. Function Subcommands.......................................................................162
13.38.2 Device Attribute Data Structure ...............................................................................166
13.38.3 Device Attribute Thresholds data structure ..............................................................171
13.38.4 S.M.A.R.T. error log sector ......................................................................................172
13.38.5 Self-test log data structure .......................................................................................174
13.38.6 Error reporting ..........................................................................................................175
13.39 Standby (E2h/96h).............................................................................................................176
13.40 Standby Immediate (E0h/94h)...........................................................................................177
13.41 Write Buffer (E8h).............................................................................................................178
13.42 Write DMA (CAh/CBh) ....................................................................................................179
13.43 Write DMA EXT (35h)......................................................................................................181
13.44 Write Long (32h/33h)........................................................................................................183
13.45 Write Multiple (C5h) .........................................................................................................185
13.46 Write Multiple EXT (39h).................................................................................................186
13.47 Write Sectors (30h/31h).....................................................................................................188
13.48 Write Sectors(s) EXT (34h)...............................................................................................190
13.49 Write Verify (3Ch: vendor specific)..................................................................................191
14.0 Time-out values........................................................................................................................193
15.0 Appendix...................................................................................................................................195
15.1 Commands Support Coverage .............................................................................................195
15.2 SET FEATURES Commands Support Coverage................................................................197
15.3 Changes from Travelstar 60GH and 40GN .........................................................................198
Hitachi Global Storage Technologies
List of Tables
Table 1: Formatted capacities ...............................................................................................15
Table 2: Data sheet ...............................................................................................................15
Table 3: Cylinder allocation .................................................................................................16
Table 4: Performance characteristics ....................................................................................17
Table 5: Mechanical positioning performance .....................................................................17
Table 6: Full stroke seek time ...............................................................................................18
Table 7: Single track seek time .............................................................................................18
Table 8: Average latency ......................................................................................................19
Table 9: Drive ready time .....................................................................................................19
Table 10: Description of operating modes ............................................................................19
Table 11: Drive ready time ...................................................................................................20
Table 12: Examples of error cases. .......................................................................................23
Table 13: Environmental condition ......................................................................................25
Table 14: Magnetic flux density limits .................................................................................26
Table 15: DC power requirements ........................................................................................27
Table 16: Power consumption efficiency .............................................................................28
Table 18: Random vibration PSD profile breakpoints (operating) .......................................33
Table 19: Swept sine vibration .............................................................................................34
Table 20: Random Vibration PSD Profile Breakpoints (nonoperating) ...............................34
Table 21: Operating shock ....................................................................................................34
Table 22: Nonoperating shock ..............................................................................................35
Table 23: Weighted sound power .........................................................................................35
Table 24: Signal definitions ..................................................................................................40
Table 25: Special signal definitions for Ultra DMA .............................................................41
Table 26: PIO cycle timings .................................................................................................45
Table 27: Multiword DMA cycle timings ............................................................................46
Table 28: Ultra DMA cycle timings (Initiating Read) ..........................................................47
Table 29: Ultra DMA cycle timings (Host Pausing Read) ...................................................48
Table 30: Ultra DMA cycle timings (Host Terminating Read) ............................................49
Table 31: Ultra DMA cycle timings (Device Terminating Read) ........................................50
Table 32: Ultra DMA cycle timing (Initiating Write) ..........................................................51
Table 33: Ultra DMA cycle timing (Device Pausing Write) ................................................52
Table 34: Ultra DMA cycle timings (Device TerminatingWrite) ........................................53
Table 35: Ultra DMA cycle timings (Host Terminating Write) ...........................................54
Table 36: I/O address map ....................................................................................................56
Table 37: Register Set ...........................................................................................................63
Table 38: Alternate Status Register ......................................................................................64
Table 39: Device Control Register .......................................................................................65
Table 40: Drive Address Register .........................................................................................65
Table 41: Device Head/Register ..........................................................................................66
Table 42: Error Register .......................................................................................................66
Table 43: Status Register ......................................................................................................67
Table 44: Reset response table ..............................................................................................69
Table 45: Default Register Values ........................................................................................70
Table 46: Diagnostic codes ...................................................................................................70
Table 47: Reset error register values ....................................................................................71
Table 48: Device behavior by ATA command .....................................................................72
Table 49: Power conditions ..................................................................................................75
Table 50: Initial setting .........................................................................................................79
Table 51: Usual operation for POR ......................................................................................80
Table 52: Password lost ........................................................................................................81
Table 53: Command table for device lock operation ...........................................................82
Table 54: Set Max SET PASSWORD data content .............................................................84
Table 55: Set Max security mode transition .........................................................................85
Table 56: Device address map before and after Set Feature .................................................86
Table 57: Seek overlap .........................................................................................................87
Table 58: Command Set (1 of 2) ..........................................................................................97
Table 59: Command Set (2 of 2) ..........................................................................................98
Table 60: Command Set (subcommand) ..............................................................................99
Table 61: Check Power Mode Commmand (E5h/98h) ........................................................101
Table 62: Check Power Mode Command (E5h/98h) ............................................................102
Table 63: Device Configuration Overlay Features register values .......................................102
Table 64: Device Configuration Overlay Data structure .....................................................104
Table 65: DCO error information definition. ........................................................................104
Table 66: Execute Device Diagnostic command (90h) ........................................................105
Table 67: Flush Cache command (E7h) ...............................................................................106
Table 68: Flush Cache command (E7h) ...............................................................................107
Table 69: Format Track command (50h) ..............................................................................108
Table 70: Format Unit command (F7h) ................................................................................109
Table 71: Identify Device command (ECh) ..........................................................................110
Table 72: Identify device information. (Part 1 of 7) ............................................................111
Table 73: Identify device information. (Part 2 of 7) ............................................................112
Table 74: Identify device information. (Part 3 of 7) ............................................................113
Table 75: Identify device information. (Part 4 of 7) ............................................................114
Table 76: Identify device information. (Part 5 of 7 ..............................................................115
Table 77: Identify device information. (Part 6 of 7) ............................................................116
Table 78: Identify device information. (Part 7 of 7) ............................................................117
Table 79: Number of cylinders/heads/sectors by model. .....................................................118
Table 80: Idle command (E3h/97h) ......................................................................................119
Table 81: Idle Immediate command (E1h/95h) ....................................................................120
Table 82: Initialize Device Parameters command (91h) ......................................................121
Table 83: Read Buffer (E4h) .................................................................................................122
Table 84: Read DMA command (C8h/C9h) .........................................................................123
Table 85: Read DMA EXT (25h) ........................................................................................125
Table 86: Read Long (22h/23h) ............................................................................................127
Table 87: Read Multiple (C4h) .............................................................................................129
Table 88: Read Multiple EXT (29h) .....................................................................................131
Table 89: Read Native Max ADDRESS (F8h) .....................................................................132
Hitachi Global Storage Technologies
Table 90: Read Native Max ADDRESS EXT (27h) ............................................................133
Table 91: Read Sectors (20h/21h) ........................................................................................134
Table 92: Read Sector(s) EXT Command (24h) ...................................................................135
Table 93: Read Verify Sectors (40h/41h) .............................................................................137
Table 94: Read Verify Sector(s) EXT Command (42h) .......................................................139
Table 95: Recalibrate (1xh) ..................................................................................................141
Table 96: Security Disable Password (F6h) .........................................................................142
Table 97: Password Information for Security Disable Password command ........................142
Table 98: Security Disable Password (F6h) .........................................................................143
Table 99: Security Erase Unit (F4h) .....................................................................................144
Table 100: Erase Unit information .......................................................................................144
Table 101: Security Freeze Lock (F5h) ................................................................................146
Table 102: Security Set Password (F1h) ...............................................................................147
Table 103: Security Set Password information ....................................................................147
Table 104: Security Unlock (F2h) ........................................................................................149
Table 105: Seek (7xh) ..........................................................................................................150
Table 106: Sense Condition (F0h: vendor specific) .............................................................151
Table 107: Set Features (EFh) ..............................................................................................152
Table 108: Set Max ADDRESS (F9h) ..................................................................................154
Table 109: Set Max ADDRESS EXT Command (37h) .......................................................156
Table 110: Set Multiple command (C6h) .............................................................................158
Table 111: Sleep (E6h/99h) ..................................................................................................159
Table 112: S.M.A.R.T. Function Set (B0h) ..........................................................................160
Table 113: Device Attribute Data Structure .........................................................................165
Table 114: Status Flag definitions ........................................................................................167
Table 115: Device Attribute Thresholds Data Structure .......................................................170
Table 116: Individual Threshold Data Structure ..................................................................170
Table 117: Command data structure ....................................................................................171
Table 118: Command data structure .....................................................................................172
Table 119: Error data structure .............................................................................................172
Table 120: Self-test log data structure ..................................................................................173
Table 121: S.M.A.R.T. Error Codes .....................................................................................174
Table 122: Standby (E2h/96h) ..............................................................................................175
Table 123: Standby Immediate (E0h/94h) ............................................................................176
Table 124: Write Buffer (E8h) ..............................................................................................177
Table 125: Write DMA (CAh/CBh) .....................................................................................178
Table 126: Write DMA (35h) ...............................................................................................180
Table 127: Write Long (32h/33h) .........................................................................................182
Table 128: Write Multiple (C5h) ..........................................................................................184
Table 129: Write Sectors Command (30h/31h) ....................................................................187
Table 130: Write Sector(s) EXT Command (34h) ................................................................189
Table 131: Time-out values ..................................................................................................191
Table 132: Command coverage (1 of 2) ...............................................................................193
Table 133: Command coverage (2 of 2) ...............................................................................194
Table 134: SET FEATURES command coverage ................................................................195

1.0 General

1.1 Introduction

This document describes the specifications of the following T ravelstar 80GN, a 2.5-inch hard disk drive, ATA/IDE interface with a rotational speed of 4200 RPM and a height of 9.5 mm:
Drive Name Model Number Capacity(GB) Height (mm) Rotational speeed
Travelstar 80GN IC25N080ATMR04 80 GB 9.5 4200 Travelstar 80GN IC25N060ATMR04 60 GB 9.5 4200 Travelstar 80GN IC25N040ATMR04 40 GB 9.5 4200 Travelstar 80GN IC25N030ATMR04 30 GB 9.5 4200 Travelstar 80GN IC25N020ATMR04 20 GB 9.5 4200
Part 1 of this document beginning on page 11 defines the hardware functional specification. Part 2 of this docu­ment beginning on page 57 defines the interface specification
These specifications are subject to change without notice.

1.2 References

ATA/ATAPI-6 (T13/1410D Revision 3b)

1.3 Abbreviations

Abbreviation Meaning
32 KB 32 x 1024 bytes 64 KB 64 x 1024 bytes AAmpere AC alternating current AT Advanced Technology ATA Advanced Technology Attachment BIOS Basic Input/Output System C Celsius CSA Canadian Standards Association C-UL Canadian-Underwriters Laborato ry Cyl cylinder DC Direct Current DFT Drive Fitness Test DMA Direct Memory Access ECC error correction code EEC European Economic Community EMC electromagnetic compatibility ERP Error Recovery Procedure
Travelstar 80GN Hard Disk Drive Specification
5
ESD E lectrostatic Discharge FCC Federal Communications Commission FRU field replacement unit G gravity (a unit of force)
2
G
/Hz (32 ft/sec)2 per Hertz Gb 1,000,000,000 bits GB 1,000,000,000 bytes GND ground h hexadecimal HDD hard disk drive Hz Hertz I Input ILS i ntegrated lead suspension I/O Input/Output ISO International Standards Organization KB 1,000 bytes Kbpi 1000 bits per inch kgf-cm kilogram (force)-centimeter KHz kilohertz LBA logical block addressing Lw unit of A-weighted sound power mmeter max maximum MB 1,000,000 bytes Mbps 1,000,000 bits per second MHz megahertz MLC Machine Level Control mm millimeter ms millisecond us, ms microsecond No number OOutput OD Open Drain Programmed Input/Output PIO Programmed Input/Output POH power on hours Pop population P/N part number p-p peak-to-peak PSD power spectral density RES radiated electromagnetic susceptibility RFI radio frequency interference RH relative humidity % RH per cent relative humidity
Travelstar 80GN Hard Disk Drive Specification
6
RMS root mea n sq uare RPM revolut ions per minute RST reset R/W read/write sec second SELV secondary low voltage S.M.A.R.TSelf-Monitoring, Analysis, and Reporting Technology TPI tracks per inch Trk track TTL transistor-transistor logic UL Underwriters Laboratory Vvolt VDE Verband Deutscher Electrotechniker Wwatt 3-state transistor-transistor tristate logic

1.4 Caution

• Do not apply force to the top cover (See figure below).
• Do not cover the breathing hole on the top cover (See figure below).
• Do not touch the interface connector pins or the surface of the printed circuit board
• This drive can be damaged by electrostatic discharge (ESD). Any damages incurred to the drive after its removal from the shipping package and the ESD protective bag are the responsibility of the user.
Travelstar 80GN Hard Disk Drive Specification
7

1.5 Drive handling precautions

Do not press on the drive cover during handling.
Travelstar 80GN Hard Disk Drive Specification
8

2.0 Outline of the drive

• 2.5 inch, 9.5-mm height
• Formatted capacities of 80 GB, 60 GB, 40 GB, 30 GB, 20 GB
• 512 bytes/sector
• AT Interface (Enhanced IDE) conforming to ATA/ATAPI-6
• Integrated controller
• No-ID recording format
• Coding : 96/102 MTR
• Multi zone recording
• Enhanced ECC On-The-Fly
• 52 bytes 4 way Interleaved Reed Solomon Code
• 5 bytes per interleave On-The-Fly correction
• Segmented Buffer with write cache 8192 KB - Upper 308 KB is used for firmware (80/60GB models) 2048 KB - Upper 308 KB is used for firmware (40/30/20GB models)
• Fast data transfer rate – up to 100 MB/s
• Media data transfer rate (max): 350 Mb/s
• Average seek time: 12 ms for read
• Closed-loop actuator servo (Embedded Sector Servo)
• Rotary voice coil motor actuator
• Load/Unload mechanism
• Mechanical latch
• Adaptive power save control - 0.65 Watts at idle state
• Power on to ready - 3.0 sec
• Operating shock: 1960 m/sec
• Nonoperating shock: 7840 m/sec
2
(200 G) 2ms
2
(800 G) 1ms
Travelstar 80GN Hard Disk Drive Specification
9
Travelstar 80GN Hard Disk Drive Specification
10
Part 1. Functional specification
Travelstar 80GN Hard Disk Drive Specification
11
Travelstar 80GN Hard Disk Drive Specification
12

3.0 Fixed-disk subsystem description

3.1 Control electronics

The control electronics works with the following functions:
• AT Interface Protocol
• Embedded Sector Servo
• No-ID (TM) formatting
• Multizone recording
• Code: 96/102 MTR
• ECC On-The-Fly
• Enhanced Adaptive Battery Life Extender

3.2 Head disk assembly data

The following technologies are used in the drive:
• Pico Slider
• Smooth glass disk
•GMR head
• Integrated lead suspension (ILS)
• Load/unload mechanism
• Mechanical latch
Travelstar 80GN Hard Disk Drive Specification
13
Travelstar 80GN Hard Disk Drive Specification
14

4.0 Drive characteristics

4.1 Formatted capacity

Table 1: Formatted capacities
80 GB model 60 GB model 40 GB model 30 GB model 20 GB model
Physical Layout
Bytes per sector 512 512 512 512 512 Sectors per track 392-952 392-952 392-952 392-952 392-952 Number of heads43221 Number of disks22111
Logical layout
Number of heads1616161616 Number of Sectors/track6363636363 Number of Cylinders 16,383 16,383 16,383 16,383 16,383 Number of sectors 156,301,488 117,210,240 78,140,160 58,605,120 39,070,080 Total logical data bytes 80,026,361,856 60,011,642,880 40,007,761,920 30,005,821,440 20,003,880,960

4.2 Data sheet

Table 2: Data sheet
Rotational Speed [RPM] 4200 Data transfer rates (buffer to/from media) (Mbps) 350 Data transfer rates (Mbytes/sec) ULTRA DMA 100 100 Recording density (Kbit/mm) (Max) 28
(KBPI) (Max. Typ) 712 Track density (Ktrack/mm) (Typ.) 3.78 (Ktpi) (Typ) 96 Areal density (Kbit/sq-mm - Max) 106 (Gbit/sq-inch - Max) 70 Number of zones 16
Travelstar 80GN Hard Disk Drive Specification
15

4.3 Cylinder allocation

The table shows typical data format (96K TPI / 712K BPI). Each drive is formatted in the factory test by optimiz­ing TPI/BPI combination. Contact Hitachi technical support for detail.
Table 3: Cylinder allocation
96 kTPI / 712 kBPI format
Zone Physical cylinders Sectors/Track
Data Zone 0 0 - 4,359 868 Data Zone 1 4,360 - 9,591 840 Data Zone 2 9,592 - 13,951 812 Data Zone 3 13,952 - 19,183 777 Data Zone 4 19,184 - 23,775 735 Data Zone 5 23,980 - 28,775 700 Data Zone 6 28,776 - 33,135 672 Data Zone 7 33,136 - 37,059 630 Data Zone 8 37,060 - 39,675 609
Data Zone 9 39,676 - 43,163 588 Data Zone 10 43,164 - 48,395 546 Data Zone 11 48,396 - 51,011 525 Data Zone 12 51,012 - 53,627 504 Data Zone 13 53,628 - 54,935 483 Data Zone 14 54,936 - 57,551 462 Data Zone 15 57,552 - 58,859 448
Travelstar 80GN Hard Disk Drive Specification
16

4.4 Performance characteristics

Drive performance is characterized by the following parameters:
• Command overhead
• Mechanical head positioning
- Seek time
- Latency
• Data transfer speed
• Buffering operation (read ahead/write cache)
Note: All the above parameters contribute to drive performance. There are other parameters that contribute to the performance of the actual system. This specification tries to define the bare drive characteristics, not system throughput, which depends on the system and the application.
The following table gives a typical value for each parameter. The detailed descriptions are found in Section 5.0, “Data integrity” beginning on page 21.
Table 4: Performance characteristics
Function
Average random seek time - read (ms) 12 Average random seek time - write (ms) 14 Rotational speed (RPM) 4200 Power-on-to-ready (sec) 3.0 Command overhead (ms) 1.0 Disk-buffer data transfer (Mb/s) 350 Buffer-host data transfer (Mb/s) 100

4.4.1 Command overhead

Command overhead time is defined as the interval from the time that a drive receives a command to the time that the actuator starts its motion

4.4.2 Mechanical positioning

4.4.2.1 Average seek time (including settling)
Table 5: Mechanical positioning performance
Command type Typical (ms) Max (ms)
Read 12 16
Write 14 17
Travelstar 80GN Hard Disk Drive Specification
17
“Typical” and “Max” are used throughout this document and are defined as follows:
Typical Average of the drive population tested at nominal environmental and voltage conditions. Max Maximum value measured on any one drive over the full range of the environmental and voltage
conditions. (See Section 6.1, “Environment” on page 25 and Section 6.2, “DC power require­ments” on page 27 for ranges.)
The seek time is measured from the start of the actuator’s motion to the start of a reliable read or write operation. A reliable read or write implies that error correction or recovery is not used to correct arrival problems. The average seek time is measured as the weighted average of all possible seek combinations.
max
Σ (m10 n)(Tnin + Tnout)
n=1
Weighted Average = ––––––––––––––––––––––––––––
(max + 1)(max)
where
max = Maximum seek length n= Seek length (1 to max) Tnin = Inward measured seek time for an n track seek Tnout = Outward measured seek time for an n track seek
4.4.2.2 Full stroke seek time
Table 6: Full stroke seek time
Command type Typical (ms) Max (ms)
Read 23.0 30.0
Write 24.0 31.0
Full stroke seek is measured as the average of 1,000 full stroke seeks.
4.4.2.3 Single track seek time (without command overhead, including settling)
Table 7: Single track seek time
Command type Typical (ms) Max (ms)
Read 2.5 4.0
Write 3.0 4.5
Single track seek is measured as the average of one (1) single track seek from every track in both directions (inward and outward).
Travelstar 80GN Hard Disk Drive Specification
18
4.4.2.4 Average latency
Table 8: Average latency
Rotational speed
(RPM)
Time for one
revolution (ms)
Average latency
4200 14.3 7.1
4.4.2.5 Drive ready time
Table 9: Drive ready time
Drive ready time (sec)
Condition
Typical Max
Power on to Ready 3.0 9.5
Ready
Power on to Ready
The condition in which the drive is able to perform a media access command (for exam­ple- read, write) immediately.
This includes the time required for the internal self diagnostics.

4.4.3 Operating modes

4.4.3.1 Description of operating modes
(ms)
Table 10: Description of operating modes
Operating mode Description Spin-up Seek Write Read
Start up time period from spindle stop or power down.
Seek operation mode
Write operation mode
Read operation mode
The device is capable of responding immediately to idle media access requests. All
Performance Idle
electronic components remain powered and the full frequency servo remains opera­tional.
The device is capable of responding immediately to media access requests. Some cir­cuitry—including servo system and R/W electronics—is in power saving mode. The
Active idle
head is parked near the mid-diameter the disk without servoing. A device in Active idle mode may take longer to complete the execution of a command because it must activate that circuitry.
Low power idle
The head is unloaded onto the ramp position. The spindle motor is rotating at full speed.
Travelstar 80GN Hard Disk Drive Specification
19
Table 10: Description of operating modes
Operating mode Description
The device interface is capable of accepting commands. The spindle motor is stopped.
Standby
All circuitry but the host interface is in power saving mode. The spindle motor is stopped. All circuitry but the host interface is in power saving mode.
Sleep
The device requires a soft reset or a hard reset to be activated. All electronics, includ­ing spindle motor and host interface, are shut off.
4.4.3.2 Mode transition time - from Standby to Idle
Table 11: Drive ready time
From To
Transition Time
(typical)
Standby Idle 2.0 (80,60GB)
Transition Time
(max.)
9.5
1.8(40,30,20GB)
4.4.3.3 Operating mode at power on
The device goes into Idle mode after power on or hard reset as an initial state. Initial state may be changed to Standby mode using pin C on the interface connector. Refer to section 7.10, “Drive address setting” on page 55 for details.
4.4.3.4 Adaptive power save control
The transient timing from Performance Idle mode to Active Idle mode and Active Idle mode to Low Power Idle mode is controlled adaptively according to the access pattern of the host system. The transient timing from Low Power Idle mode to Standby mode is also controlled adaptively, if it is allowed by Set Features Enable Adavanced Power Management subcommand.
Travelstar 80GN Hard Disk Drive Specification
20
Loading...
+ 184 hidden pages
Privacy Policy Cookie Policy Terms of Use