Henny Penny COMPUTRON 8000 User Manual

5 (6)

 

 

Model 8000 Computron

 

 

 

 

 

SECTION 1. OPERATION

 

 

 

1-1. INTRODUCTION

This section provides basic operating procedures for the

 

 

Henny Penny Computron 8000 Fryer. See the Operator’s

 

 

Manual for the fryer for more details on fryer operation.

1-2. SAFETY

The only way to ensure safe operation of the Henny Penny

 

 

Computron 8000 Fryer is to fully understand the proper

 

 

installation, operation and maintenance procedures, found in

 

 

the fryer Operator’s Manual. The instructions in this manual

 

 

have been prepared to aid you in learning the controls.

 

 

Where information is of particular importance or is safety

 

 

related, the words NOTICE, CAUTION, or WARNING are

 

 

used. Their usage is described below:

 

 

SAFETY ALERT SYMBOL is used with DANGER,

 

 

WARNING, or CAUTION which indicates a personal

 

 

injury type hazard.

 

 

NOTICE is used to highlight especially important

 

 

information.

 

 

CAUTION used without the safety alert symbol

 

 

indicates a potentially hazardous situation

 

 

which, if not avoided, may result in property

 

 

damage.

 

 

CAUTION indicates a potentially hazardous

 

 

situation which, if not avoided, may result in

 

 

minor or moderate injury.

 

 

WARNING indicates a potentially hazardous

 

 

situation which, if not avoided, could result in

 

 

death or serious injury.

DANGER INDICATES AN IMMINENTLY

HAZARDOUS SITUATION WHICH, IF NOT

AVOIDED, WILL RESULT IN DEATH OR

SERIOUS INJURY.

103

1-1

 

 

 

 

 

 

 

Model 8000 Computron

1-3.

OPERATING CONTROLS

Refer to Figure 1-1.

 

Fig.

Item

Description

Function

No.

No.

 

 

 

 

 

 

1-1

1

 

 

 

Lights when the control calls for heat; the elements or

 

 

 

 

 

burners come on and heat the shortening

1-1

2

Digital Display

Shows all the functions of the Cook Cycle, program modes,

 

 

 

 

 

diagnostic modes, and alarms

 

1-1

3

 

 

 

Lights when the solenoid closes and pressure starts to build

 

 

 

 

 

 

 

 

inside frypot

 

1-1

4

 

 

 

Flashes when the shortening temperature is NOT at the

 

 

 

 

 

proper temperature for cooking product

1-1

5

 

 

 

Lights when the shortening temperature is 5° F (3° C) below

 

 

 

 

 

to 15° F (9° C) above the cooking temperature, signaling the

 

 

 

 

 

operator that the shortening temperature IS at the proper

 

 

 

 

 

temperature for cooking product

1-1

6

 

 

 

Press to display the following fryer information and status:

 

 

 

 

 

a. The temperature of the shortening

 

 

 

 

 

b. The temperature setpoint

 

 

 

 

 

 

c. Filter status

 

 

 

 

 

 

d. The number of times filtered today

 

 

 

 

 

e. The average no. of filters per day

 

 

 

 

 

f. No. of times Cook Cycle was stopped early today

 

 

 

 

 

g. No. of times Cook Cycle was stopped early in past week

 

 

 

 

 

e. Oil Life Display (Only if “Change Oil” feature is enabled)

 

 

 

 

 

f. Date and time

 

 

 

 

 

 

If pressed in the Program Mode, shows previous settings;

 

 

 

 

 

 

 

 

 

 

 

 

pressing this along with

 

accesses the Information

 

 

 

 

 

Mode which has historic

information on the operator and

 

 

 

 

 

fryer’s performance

 

1-1

7 & 8

 

 

 

Used to adjust the value of the currently displayed setting in

 

 

 

 

 

the Program modes

 

1-2

1005

 

 

 

 

 

 

 

Model 8000 Computron

1-3. OPERATING CONTROLS

 

 

(Continued)

 

Fig.

Item

Description

Function

No.

No.

 

 

 

 

 

 

1-1

9

 

 

 

 

 

Press to access program modes; once in the program mode, it

 

 

 

 

 

 

 

 

 

 

 

 

is used to advance to the next setting; if pressed along with

 

 

 

 

 

 

 

it accesses the Information Mode which has historic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

information on the operator and fryer’s performance

1-1

10

 

 

 

 

 

Used to start and stop Cook Cycles, and to stop the timer at

 

 

 

 

 

 

 

the end of a Holding Cycle

1-1

11

Menu Card

The name of the food product associated with each product

 

 

Window

selection button; the menu card strip is located behind the

 

 

 

 

 

 

 

decal

1-1

12

Product Select

Used to select the product for cooking; to start Cook

 

 

Buttons

Cycles with them; see section 2, Special Program

 

 

 

 

 

 

 

Mode item SP-10

1-1

13

COOK/PUMP Switch

A 3-way switch with a center OFF position; turn the switch

 

 

 

 

 

 

 

to the COOK position to operate the fryer; turn the switch to

 

 

 

 

 

 

 

the PUMP position to operate the filter pump; certain

 

 

 

 

 

 

 

conditions must be met before operating the filter pump;

 

 

 

 

 

 

 

these conditions are covered later in the Filtering section of

 

 

 

 

 

 

 

the fryer manual

1-1

14

 

 

 

 

 

Used to manually enter an Idle Mode, or Clean-Out Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

103

1-3

Henny Penny COMPUTRON 8000 User Manual

Model 8000 Computron

Figure 1-1. Control Panel

1-4

103

Loading...
+ 7 hidden pages