Hatco ITQ-1750-2C Installation Manual

0 (0)

hatcocorp.com

(see page 2)

S’inscrire en ligne!

(voir page 16)

Intelligent Toast-Qwik

Conveyor Toaster • Grille-pain à convoyeur

ITQ Series • Série ITQ

Installation and Operating Manual

Manuel d’installation et d’utilisation

WARNING

Do not operate this equipment unless you have read and understood the contents of this manual! Failure to follow the instructions contained in this manual may result in serious injury or death. This manual contains important safety information concerning the maintenance, use, and operation of this product. If you’re unable to understand the contents of this manual, please bring it to the attention of your supervisor. Keep this manual in a safe location for future reference.

English = p 2

No opere este equipo al menos que haya leído y comprendido el contenido de este manual! Cualquier falla en el seguimiento de las instrucciones contenidas en este manual puede resultar en un serio lesión o muerte. Este manual contiene importante información sobre seguridad concerniente al mantenimiento, uso y operación de este producto. Si usted no puede entender el contenido de este manual por favor pregunte a su supervisor. Almacenar este manual en una localización segura para la referencia futura.

ADVERTENCIA

AVERTISSEMENT

Ne pas utiliser cet équipement sans avoir lu et compris le contenu de ce manuel ! Le non-respect des instructions contenues dans ce manuel peut entraîner de graves blessures ou la mort. Ce manuel contient des informations importantes concernant l’entretien, l’utilisation et le fonctionnement de ce produit. Si vous ne comprenez pas le contenu de ce manuel, veuillez le signaler à votre supérieur. Conservez ce manuel dans un endroit sûr pour pouvoir vous y référer plus tard.

Français = p 16

WARNING

CAUTION

CONTENTS

English

Important Owner Information .............................................. 2

Introduction ...........................................................................2

Important Safety Information .............................................. 3

Model Description ................................................................4

Model Designation ...............................................................5

Specifications ....................................................................... 5

Plug Configurations ............................................................. 5

Electrical Rating Charts ....................................................... 5

Dimensions .......................................................................... 6

Installation .............................................................................7

General ................................................................................ 7

Operation ...............................................................................8

General ................................................................................ 8

Touchpad Control ................................................................8

Operating the Toaster .......................................................... 9

IMPORTANT OWNER INFORMATION

Record the model number, serial number, voltage, and purchase date of the unit in the spaces below (specification label located on the back of the unit). Please have this information available when calling Hatco for service assistance.

Model No. ________________________________________

Serial No. _________________________________________

Voltage ___________________________________________

Power Save Mode ............................................................... 9

Programming Menu Items ................................................. 10

Using the Systems Menu .................................................. 11

Maintenance ........................................................................ 12

General .............................................................................. 12

Daily Cleaning ...................................................................12

Cleaning the Fan Filters .................................................... 13

Cleaning the Bottom Element Reflector ............................ 13

Cleaning the Touchpad Control .........................................13

Troubleshooting Guide ......................................................14

ITQ Error Message Guide .................................................14

Options and Accessories .................................................. 15

Limited Warranty ................................................................15

Authorized Parts Distributors ........................... Back Cover

Business Hours: 7:00 am to 5:00 pm Central Standard Time (CST)

(Summer Hours: June to September— 7:00 am to 5:00 pm CST Monday–Thursday 7:00 am to 4:00 pm CST Friday)

Telephone: 800-558-0607; 414-671-6350

E-mail: partsandservice@hatcocorp.com

Date of Purchase ___________________________________

Completing online warranty registration will prevent delay in obtaining warranty coverage. Access the Hatco website at www.hatcocorp.com, select the Parts & Service pull-down menu, and click on “Warranty Registration”.

INTRODUCTION

Hatco Intelligent Toast-Qwik® Conveyor Toasters with Spot-On™ technology are specially-designed to automate, accelerate, and enhance the toasting operation. Spot-On technology senses when product is placed on the conveyor and activates the unit. Product then passes through a heating chamber for rapid and thorough toasting. Pre-programmed conveyor speed and chamber temperature produce the desired toasting color for the product being toasted.

Hatco toasters are built with quality to meet the demands of foodservice operations and provide years of trouble-free performance. The metal-sheathed, tubular heating elements are guaranteed against breakage and burnout for two years.

Hatco Intelligent Toast-Qwik Conveyor Toasters are products of extensive research and field testing. The materials used were selected for maximum durability, attractive appearance, and optimum performance. Every unit is inspected and tested thoroughly prior to shipment.

This manual provides installation, safety, and operating instructions for Intelligent Toast-Qwik Conveyor Toasters. Hatco recommends all installation, operating, and safety instructions appearing in this manual be read prior to installation or operation of a unit.

24 Hour 7 Day Parts and Service Assistance available in the United States and Canada by calling 800-558-0607.

Additional information can be found by visiting our web site at www.hatcocorp.com.

Safety information that appears in this manual is identified by the following signal word panels:

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to personal injury.

Form No. ITQM-0317

English

IMPORTANT SAFETY INFORMATION

Read the following important safety information before using this equipment to avoid serious injury or death and to avoid damage to equipment or property.

WARNING

ELECTRIC SHOCK HAZARD:

• Plug unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. If plug and receptacle do not match, contact a qualified electrician to determine and install proper voltage and size electrical receptacle.

• Put unit in standby, allow to cool, turn OFF power switch, and unplug power cord before performing cleaning, adjustments, maintenance, or attempting to clear a jam.

• Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C) and a maximum of 100°F (38°C).

• DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or saturated with water.

• Do not steam clean or use excessive water on unit.

• This unit is not “jet-proof” construction. Do not use jetclean spray to clean this unit.

• Do not clean unit when it is energized or hot.

• Do not allow liquids to spill into unit.

• Do not pull unit by power cord.

• Discontinue use if power cord is frayed or worn.

• Do not attempt to repair or replace a damaged power cord. Cord must be replaced by Hatco, an Authorized Hatco Service Agent, or a person with similar qualifications.

• Never insert a knife, fork, or similar object into toasting chamber.

• This unit must be serviced by qualified personnel only. Service by unqualified personnel may lead to electric shock or burn.

• Use only Genuine Hatco Replacement Parts when service is required. Failure to use Genuine Hatco Replacement Parts will void all warranties and may subject operators of the equipment to hazardous electrical voltage, resulting in electrical shock or burn. Genuine Hatco Replacement Parts are specified to operate safely in the environments in which they are used. Some aftermarket or generic replacement parts do not have the characteristics that will allow them to operate safely in Hatco equipment.

EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

Make sure all operators have been instructed on the safe and proper use of the unit.

This unit is not intended for use by children or persons with reduced physical, sensory, or mental capabilities. Ensure proper supervision of children and keep them away from the unit.

If toaster overheats or cooling fans inside unit stop working, the safety high-limit switch will shut off toaster. Contact Authorized Service Agent or Hatco for assistance.

Form No. ITQM-0317

WARNING

FIRE HAZARD:

 • Allow a minimum clearance of 1″ (25 mm) along the

sidesandrearofunit.Allowaminimumclearanceof12″

(305 mm) in the front, measured from chamber opening on toaster body. If safe distances are not maintained, discoloration or combustion could occur.

 • Donotlocatetoasterundershelvingorcloserthan12″

(305 mm) from the ceiling.

• Do not place anything on top of toaster. Do not place toaster near or underneath curtains or other combustible materials. Items near or on top of toaster could catch fire causing injury and/or damage to the toaster.

• In case of fire, disconnect toaster from power source immediately. This allows unit to cool, making it easier and safer to put out fire.

This unit has no “user-serviceable” parts. If service is required on this unit, contact an Authorized Hatco Service Agent or contact the Hatco Service Department at 800-558-0607 or 414-671-6350.

CAUTION

BURN HAZARD:

• Some exterior surfaces on unit will get hot. Use caution when touching these areas.

• Do not remove crumb trays, toast chute, or toast chute slide for cleaning until toaster is cool.

Locate unit at proper counter height in an area that is convenient for use. Location should be level and strong enough to support weight of unit and contents.

Always operate toaster with crumb tray(s) and toast chute

installed.

If Warning light comes on, unit is malfunctioning due to fan failure. Turn off unit, disconnect from power supply, and have unit serviced by a qualified technician.

NOTICE

Do not locate unit in an area subject to temperatures above 100°F (38°C) or grease from grills, fryers, etc. Excessive temperatures and grease could cause damage to unit.

Do not locate unit in area with excessive air movement around unit. Avoid areas that may be subject to active air movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, and exterior doors).

Do not locate toaster in an area that restricts air flow around front or rear of unit.

Do not block air flow to cooling fans. Operating issues and/or damage to unit may occur.

Do not turn off unit while cooling fans are running. Damage to unit may occur. Put unit in standby and allow to cool for 20 minutes before turning off.

Use non-abrasive cleaners and cloths only. Abrasive cleaners and cloths could scratch finish of unit, marring its appearance and making it susceptible to soil accumulation.

This unit is intended for commercial use only—NOT for household use.

Clean unit daily to avoid malfunctions and maintain sanitary operation.

MODEL DESCRIPTION

USB

Port

Warning

Light

Touchpad

Control

Touchpad

Display

Crumb

Tray

Toast Chute

Slide

Product Sensors

Fan Filter

Cooling Fan

USB

Port

Warning

Light

Touchpad

Control

Touchpad

Display

Crumb

Tray

Toast Chute

Product Sensors

Fan Filter

Cooling Fan

USB

Port

Warning

Light

Touchpad

Control

Touchpad

Display

Toast Chute

Slide

Crumb Trays

Product Sensors

Left Conveyor Right Conveyor

Fan Filter

Cooling Fan

English

All Models

Intelligent Toast-Qwik® Conveyor Toasters are fast, reliable, and extremely versatile. Individually-controlled top and bottom heating elements, multi-speed two-directional conveyor belts, and optical product sensors provide the ability to produce a wide variety of menu items. Intelligent Toast-Qwik Conveyor Toasters include a programmable touchpad control with display, a USB port, a removable toast chute, a removable

crumb tray(s), removable fan filters, 1″ (25 mm) adjustable legs, and a factory attached 6′ (1829 mm) power cord and plug.

Power Save Mode

Intelligent Toast-Qwik Conveyor Toasters feature an energysaving Power Save mode that reduces heat levels to a specified percentage of full power. The toaster enters Power Save mode automatically after a specified period of inactivity or when the POWER SAVE key on the touchpad control is touched. Full power can be restored within 1–2 minutes by placing food product between the product sensors on the conveyor belt or by touching any of the program keys (keys 1–5).

ColorGuard System

Intelligent Toast-Qwik Conveyor Toasters use a patented ColorGuard Sensing System. This system monitors and

automatically adjusts conveyor speed and chamber

temperature during high usage periods to ensure toast color uniformity.

Model ITQ-875-1C

Model ITQ-8750-1C is a narrow, single conveyor toaster

capable of toasting bread products up to 2-1/8″ (54 mm) thick.

The conveyor width is 5-5/8″ (143 mm).

Model ITQ-1000-1C

Model ITQ-1000-1C is a single conveyor toaster capable

of toasting bread products up to 1-3/4″ (44 mm) thick. The

conveyor width is 9-7/16″ (240 mm).

Model ITQ-1000-1C

Model ITQ-1750-2C

Model ITQ-1750-2C is a dual conveyor toaster capable of

toasting bread products up to 2-1/8″ (54 mm) thick. Each conveyor on this model has a width of 5-5/8″ (143 mm) and

can be operated independently.

Model ITQ-875-1C

Model ITQ-1750-2C

Form No. ITQM-0317

English

I T Q - X X X X - X C

Intelligent Toast-Qwik

Conveyor Toaster

Model Number

1C = Single Conveyor 2C = Dual Conveyor

WARNING

1(0$3

1(0$/3

1(0$3 1(0$/3

Plug Configurations

Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the application.

ELECTRIC SHOCK HAZARD: Plug unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. If plug and receptacle do not match, contact a qualified electrician to determine and install the proper voltage and size electrical receptacle.

MODEL DESIGNATION

SPECIFICATIONS

Plug Configurations

NOTE: Receptacle not supplied by Hatco.

Electrical Rating Chart

Model Voltage Hertz Watts Amps Plug Configuration Shipping Weight*

ITQ-875-1C 208 60 2700 13.0 NEMA 6-20P, NEMA L6-20P 59 lbs. (27 kg)

240 60 2700 11.3 NEMA 6-20P, NEMA L6-20P 59 lbs. (27 kg)

ITQ-1000-1C 208–240 † 60 3230–4300 15.5–17.9 NEMA 6-30P, NEMA L6-30P 89 lbs. (40 kg) ITQ-1750-2C 208 60 4960 23.8 NEMA 6-30P, NEMA L6-30P 106 lbs. (48 kg)

240 60 4960 20.7 NEMA 6-30P, NEMA L6-30P 106 lbs. (48 kg)

* Shipping weight includes packaging. † Unit is designed to operate on supply voltages between 208 V and 240 V.

Form No. ITQM-0317

Front View

Top View

Side View

G F

Model ITQ-1000-1C shown.

Specification

Label

SPECIFICATIONS

Dimensions

English

Model

ITQ-875-1C

ITQ-1000-1C

ITQ-1750-2C

Width

(A)

14-5/8″

(370 mm)

17-5/8″

(448 mm)

20″

(508 mm)

Depth

(B)

28-11/16″ (728 mm)

28-5/8″

(727 mm) 28-11/16″

(728 mm)

Height

(C)

16-9/16″

(420 mm)

18″

(457 mm)

16-9/16″

(420 mm)

Footprint Width (D)

9-1/4″

(235 mm)

13-3/4″

(349 mm)

16-1/4″

(412 mm)

Footprint Depth (E)

17-3/4″

(450 mm)

17-3/4″

(450 mm)

17-3/4″

(450 mm)

Platform

Width (F)

9-1/4″

(235 mm)

13-3/4″

(349 mm)

16-1/8″

(410 mm)

Conveyor Width (G)

5-5/8″

(143 mm)

9-7/16″

(240 mm)

5-5/8″

(143 mm)

Opening

Height (H)

2-3/16”

(56 mm)

2″

(51 mm)

2-3/16”

(56 mm)

Form No. ITQM-0317

English

WARNING

CAUTION

Lower Conveyor

Support Bar

Crumb

Tray

Tab

(position

behind

pin)

ITQ-875-1C/

ITQ-1750-2C

Toast Chute

Back wall

of toaster.

ITQ-1000-1C

Toast Chute

Cutout

INSTALLATION

General

The Hatco Intelligent Toast-Qwik® Conveyor Toaster is shipped with all components pre-assembled. Care should be taken when unpacking the shipping carton to avoid damage to the unit and the components enclosed.

ELECTRIC SHOCK HAZARD: Unit is not weatherproof. Locate unit indoors where ambient air temperature is a minimum of 70°F (21°C) and a maximum of 100°F (38°C).

EXPLOSION HAZARD: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

FIRE HAZARD:

 • Allow a minimum clearance of 1″ (25 mm) alongthe

sides and rear of unit. Allow a minimum clearance of

12″ (305 mm) in the front, measuredfrom chamber

opening on toaster body. If safe distances are not maintained, discoloration or combustion could occur.

 • Donotlocatetoasterundershelvingorcloserthan12″

(305 mm) from the ceiling.

1. Remove the unit from the carton.

NOTE: To prevent delay in obtaining warranty coverage,

complete online warranty registration. See the IMPORTANT OWNER INFORMATION section for details.

2. Remove tape and protective packaging from all surfaces

of the unit.

4. Level the unit by turning the leveling feet on each leg, if necessary.

5. Install the crumb tray(s), if necessary.

a. Position the crumb tray directly under the conveyor belt

and above the lower conveyor support bar at the front of the toaster.

b. Slide the crumb tray into the toaster until it stops.

Installing a Crumb Tray (ITQ-1750-2C shown)

6. Install the toast chute, if necessary. There are two styles of toast chutes (see illustration for details).

a. Slide the long/angled section of the toast chute into the

toaster from the front.

b. As the toast chute nears the rear of the toaster, align

the cutouts/tabs on each side of the chute with the pins inside the toaster. Make sure the long/angled section of the chute is resting against the back wall of the toaster.

Locate unit at the proper counter height in an area that is convenient for use. The location should be level to prevent the unit or its contents from falling accidentally and strong enough to support the weight of the unit and contents.

Do not locate unit in an area subject to temperatures above 100°F (38°C) or grease from grills, fryers, etc. Excessive temperatures and grease could cause damage to unit.

Do not block air flow to cooling fans. Operating issues and damage to unit may occur.

3. Place the unit in the desired location.

• Make sure the unit is installed where the ambient air

• Make sure the unit is at the proper counter height in an

• Make sure the countertop is level and strong enough to

• Make sure all the feet on the bottom of the unit are

Form No. ITQM-0317

NOTICE

temperature will not rise above 100°F (38°C) and where it will not be exposed to excessive moisture or grease-

laden air. Avoid areas that may be subject to active air

movements or currents (i.e., near exhaust fans/hoods, air conditioning ducts, and exterior doors).

area convenient for use.

support the weight of the unit and food product.

positioned securely on the countertop.

Installing the Toast Chute

7. For ITQ-875-1C and ITQ-1750-2C models, install the toast chute slide onto the toast chute.

8. Plug the unit into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration. See the SPECIFICATIONS section for details.

OPERATION

WARNING

CAUTION

L1 Bun L2 Toast L3 H. Brown L4 Product4 L5 Product5

R1 Bun R2 Toast R3 H. Brown R4 Product4 R5 Product5

Touchpad Display

Left Conveyor

Program Keys

Right Conveyor

Program Keys

Touchpad Control

for dual

conveyor unit.

English

General

The Intelligent Toast-Qwik® Conveyor Toaster is designed for ease of operation and versatility. Use the following information and procedures to operate the toaster.

Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment.

BURN HAZARD:

• Some exterior surfaces on unit will get hot. Use caution when touching these areas.

• Do not remove crumb trays, toast chute, or toast chute slide for cleaning until toaster is cool.

Always operate toaster with crumb tray(s) and toast chute installed.

Touchpad Control

The following are descriptions of the controls used to operate the Intelligent Toast-Qwik Conveyor Toaster. All controls are located on the touchpad control at the front of the unit.

Program Keys (Keys 1–5)

Each program key stores the toast settings for a custom menu item. Touching one of the program keys starts the corresponding menu item toast sequence. On dual conveyor toasters, the program keys on the left side of the touchpad are for the left conveyor, and the program keys on the right side of the touchpad are for the right conveyor.

NOTE: On single conveyor toasters, only keys 1–5 are used

for custom menu items. Keys 6–10 are used for programming functions.

Darker Key

The Darker ( ) key allows a single item to be toasted to a darker shade than the current menu item setting.

To use the key: a. Place the item on the conveyor, and touch the desired

program key.

b. Touch the key. This key may be touched up to five

times to produce a shade five times darker than the current menu setting.

Lighter Key

The Lighter ( ) key allows a single item to be toasted to a lighter shade than the current menu item setting.

To use the key: a. Place the item on the conveyor, and touch the desired

program key.

b. Touch the key. This key may be touched up to five

times to produce a shade five times lighter than the current menu setting.

Up/Down Arrow Keys

The Up/Down Arrow ( ) keys scroll through additional menu items, if available. The display will show each menu item next to its corresponding program key (1–5).

Touchpad Display

The touchpad display shows the current status of the toaster as well as operational information related to the program keys, chamber temperature, error messages, etc...

Standby Key

The Standby ( ) key toggles the toaster between operation and standby. In standby, the conveyor and elements are off and the touchpad display is dark, but the toaster remains energized.

• From standby, touch and hold the key for three

seconds to activate the toaster. The toaster will be ready for operation in approximately five minutes.

• From operation, touch and hold the key for three

seconds to shut down operation and put the toaster into standby.

The POWER SAVE key puts the toaster into Power Save mode. In Power Save mode, the toaster remains activated but the heat level drops to a reduced percentage of the current heat settings. When restarting from Power Save mode, the unit will be ready to toast in approximately two minutes or less.

POWER SAVE Key

Touchpad Control and Display (ITQ-1750-2C)

Form No. ITQM-0317

English

Power I/O Switch

USB

Port

Warning

Light

Touchpad

Control

Touchpad

Display

Crumb

Tray

Toast Chute

Product Sensors

Fan Filter

Cooling Fan

OPERATION

Operating the Toaster

Startup

1. Make sure the toaster is plugged into a properly grounded electrical outlet of the correct voltage, size and plug configuration. See the SPECIFICATIONS section for details.

2. Move the power I/O switch located on the back of the toaster to the “I” (on) position.

• Graphics and software

version information will appear on the display.

3. Wait 10 seconds to allow the toaster to run internal diagnostics.

Model ITQ-1000-1C

4. Touch and hold the key on the touchpad control for three seconds to activate the toaster.

• “Preheating” will show on

the touchpad display, and the heating elements inside the toaster will energize.

• The preheating cycle lasts approximately 10 minutes.

When the preheating cycle is complete, the available menu items will appear on the touchpad display.

5. Touch the appropriate program key (keys 1–5) on the touchpad control for the desired conveyor and menu item.

• The elements and conveyor

belt will adjust settings to the selected menu item.

Form No. ITQM-0317

Preheating 10:00

1 Bun

2 Toast

3 Hash Brown 4 Product 4 5 Product 5

6. Place food product between the product sensors on the conveyor belt.

• The product sensors detect the presence of the food

product.

• For menu items that include two-directional or custom

conveyor belt movement, the sensors signal the toaster to begin the toasting sequence.

• Change the toasting shade

of the food product any time by touching either the

or keys up to five

times.

1 Bun

2 Toast

3 Hash Brown 4 Product 4 5 Product 5

2X Lighter

7. Change the selected menu item at any time by touching the desired program key on the touchpad control.

NOTE: If the Warning light comes on, the unit may be overheating

due to fan failure/blockage. Turn off and unplug the unit. Refer to the “Cleaning the Fan Filters” procedure in the MAINTENANCE section of this manual. If the unit does not function properly after cleaning the fan filters, contact an Authorized Service Agent or Hatco for assistance.

Standby Shutdown

Use standby shutdown to put the toaster in standby during extended periods of non-use.

1. Touch and hold the key on the touchpad control for three seconds to shut down operation and put the toaster into standby.

• The heating elements and

conveyor(s) will shut down.

• The cooling fans will run for

Cooling fans on. Leave plugged in.

20 minutes to cool the unit.

Shutdown

1. Touch and hold the key on the touchpad control for three seconds to shut down operation and put the toaster into standby.

2. After the cooling fans stop, move the power I/O switch located on the back of the unit to the “O” (off) position to turn off the toaster. NOTICE: Do not turn off unit while

cooling fans are running. Damage to unit may occur.

Power Save Mode

All ITQ series toasters have a built-in Power Save mode. This feature significantly reduces heat levels and energy consumption when the toaster has not been used for a specified period of time or when activated by the operator.

To start Power Save mode manually during operation:

1. Touch the key.

• The conveyor belt will

speed up temporarily to clear product from toaster.

• “Power Save” will show on

the touchpad display.

To exit Power Save mode:

1. Touch any of the program keys (keys 1–5) or place food product between the product sensors on the conveyor belt. The unit will be ready to toast in approximately two minutes or less (a countdown will appear on the touchpad display).

Power Save Caution Hot

OPERATION

Power I/O Switch

English

Programming Menu Items

Intelligent Toast-Qwik® Conveyor Toasters offer several programmable parameters to create toasting sequences for custom menu items. Use the following information and procedure to program menu items.

Programmable Parameters

Top Heat .... Heat output level from top elements. Setting

range is 1–100. 1 = lowest heat/lightest toast. 100 = highest heat/darkest toast.

Bot Heat ..... Heat output level from bottom elements. Setting

range is 1–100. 1 = lowest heat/lightest toast. 100 = highest heat/darkest toast.

Belt Time ... Total time product is in toasting chamber. Increasing

belt time will slow down conveyor and create darker toast. Decreasing belt time will speed up conveyor and create lighter toast.

Belt Dir. ...... Forward—Conveyor belt moves forward

continuously (standard toaster operation).

In and Out—Conveyor belt moves product into

toasting chamber, pauses for programmed Belt Time, then reverses and moves product out of the toasting chamber back onto the feed platform.

In and In—Conveyor belt moves product into

toasting chamber, pauses for programmed Belt Time, then continues forward and moves product out of the toasting chamber to the discharge toast chute.

Length ........ Length of the product to be toasted (measured

parallel to the conveyor).

Name .......... Edit product names. For single conveyor units: While editing product

name, use the “1” program key to move cursor left and the “6” program key to move cursor right. Touch the “8” program key to return name to factory default name.

For dual conveyor units: While editing product

name, use the left-side “1” program key to move cursor left and the right side “1” program key to move cursor right. Touch the right-side “3” program key to return name to factory default name.

Programming a Parameter

1. Make sure the toaster is plugged into a properly grounded electrical receptacle of the correct voltage, size, and plug configuration.

2. Move the power I/O switch located on the back of the toaster to the “I” (on) position.

• Graphics and software version information will appear

on the display.

3. Touch and hold the key on the touchpad control for three seconds to activate the toaster.

• The preheating cycle lasts

approximately 10 minutes. When the preheating cycle is complete, the available menu items will appear on the touchpad display.

4. Touch and hold the desired program key for three seconds.

• A password prompt will appear:

For single conveyor units, touch the “6” program key for

the password, and touch the “5” program key to accept.

For dual conveyor units, touch the right-side “1” program

key for the password, and touch the left-side “5” program key to accept.

• The Programming menu will appear on the display

showing a list of programmable parameters.

5. Use the left-side keys to scroll through and highlight/ select the desired parameter. Refer to “Programmable Parameters” in this section for a description of each available parameter.

6. With the parameter highlighted, use the right-side keys to change the parameter.

7. Continue to use the left side keys to scroll through and highlight/select other desired parameters, followed by the right-side keys to change the setting of the selected parameter.

8. When all desired parameters have been programmed:

• For single conveyor units: Touch the “5” program key to

save the changes; Touch the “10” program key to cancel all changes.

• For dual conveyor units: Touch the left-side “5” program

key to save the changes; Touch the right-side “5” program key to cancel all changes.

NOTE: After programming a menu item on a dual conveyor

toaster, the menu item will be the same program key number with the same parameters for both conveyors.

Preheating 10:00

Form No. ITQM-0317

+ 22 hidden pages