206 |
207 |
put your signature on ours.
We set out to build the very essence of the Harley-Davidson motorcycle. And what emerged was the Softail – a bike with classic hardtail looks and plenty of space where you can leave your mark.
2003 flstci Stock Production Paint, 100th Anniversary two-tone – Sterling Silver and Vivid Black
208 |
209 |
heritage Softailclassic
This Heritage Softail Classic is a perfect blend of old and new, featuring Headlamp, Passing Lamp and Turn Signal Trim Rings, Wide Beach Handlebar and 100th Anniversary Tank Panel, with old-school looks courtesy
of the Nostalgic and “Classic Chrome” Collections.
NEW BEACH BARS FOR HERITAGE CLASSIC 56364-02
NEW JIFFY STAND STRAP AND FASTENER KIT
50306-02
NEW SWINGARM PIVOT BOLT AND NUT KIT 47119-02
NEW COMBINATION SPEEDO/TACH KIT 74461-03
NEW CHROME LOWER TRIPLE TREE COVER 66053-01
NEW 100TH ANNIVERSARY TANK PANEL 62075-03
NEW WIDE WHITEWALL TYRE
43118-92A Front
43353-03 Rear
NEW SWINGARM PIVOT AXLE KIT 47119-02
HEADLAMP TRIM RING 69626-99
PASSING LAMP TRIM RINGS 69622-99A (pair)
TURN SIGNAL TRIM RINGS 69740-01 (2 sets)
CHROME UPPER FORK SLIDER COVERS 45963-97
CHROME LOWER FRONT FORK SLIDERS
46482-00 Softail
CLASSIC CHROME FRONT AXLE NUT COVER KIT 43899-86A
CHROME FRONT FENDER SKIRT 59228-91
CHROME FORK COVER KIT 67890-91A
NOSTALGIC HAND GRIPS 56275-96A
CHROME HAND CONTROL LEVER KIT
45075-96
CHROME SWITCH HOUSING KIT 70222-96
CHROME MASTER CYLINDER COVER 45078-96A
2003 flstci Stock Production Paint, 100th Anniversary Two-Tone – Sterling Silver and Vivid Black
CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT
45284-99
CHROME VOLTAGE REGULATOR COVER 74597-01
OIL PRESSURE GAUGE KIT 75133-99
BRAIDED OIL LINES 63860-00
NOSTALGIC SHIFTER PEGS 34627-99 (2)
RIDER FOOTBOARD ASSEMBLY, OLD STYLE 50599-89T (2 sets)
NOSTALGIC BRAKE PEDAL PAD 44248-96
SOFTAIL FRAME TRIM SET 47300-88T
PROFILE LOW SUSPENSION
54596-94 Front
54648-00 Rear
HARLEY-DAVIDSON SOFTAIL SLIP-ON MUFFLERS
80378-00 Slash Down
LAYBACK LICENSE PLATE MOUNTING KIT
59817-00
210
The all-new Black Bones Radical Custom Paint scheme forms the centrepiece of this Softail Standard, which features road-hugging Profile Low Rear Suspension and Baloney Cut Slip-On Mufflers. A new Slotted Style Heel Rest Kit, Brake Pedal Pad and Pegs combine with front and rear Mirror Chrome ThunderStar Wheels to add polish to this custom brute.
NEW RADICAL PAINT — BLACK AND BONE WHITE 95703-03BGB
NEW SLOTTED STYLE
SHIFTER PEG 34673-02 (2 sets)
NEW SLOTTED STYLE HEEL REST PEG KIT 50288-02
NEW SLOTTED STYLE BRAKE PAD
42799-02 Small
NEW 100TH ANNIVERSARY BADLANDER SEAT 53304-03
THUNDERSTAR MIRROR CHROME WHEEL
43602-00 |
21" Front |
43649-00 |
16" Rear |
THUNDERSTAR FLOATING BRAKE ROTOR
44365-00 Front
44366-00 Rear
THUNDERSTAR BILLET SPROCKET 40126-00
CHROME LOWER FORK SLIDERS 46477-00
BILLET TRIPLE TREE KIT 45748-01
CHROME FRONT CALIPER KIT 44395-00
CLASSIC CHROME BRAKE CALIPER INSERTS 44477-99 (2)
CLASSIC CHROME FRONT AXLE NUT COVERS 43899-86A
SMOKED TURN SIGNAL LENSES 69304-02
OVAL BAR & SHIELD BILLET STYLE MIRRORS 91962-98
211
CONTOURED CHROME & RUBBER HAND GRIPS
56459-01
CUSTOM HAND CONTROL LEVERS 45459-02
CHROME SWITCH HOUSING KIT 70222-96
CHROME MASTER CYLINDER COVER
45078-96A
CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT
45284-99
MINI TACH KIT 67848-96B
2003 fxst Colour Shop Radical Paint, Bones—Black and BoneWhite
BILLET MINI TACH MOUNT AND HANDLEBAR CLAMP 68962-98
SKULL LEATHER TANK PANEL 91001-01
HARLEY-DAVIDSON AIR CLEANER COVER 29754-01
“H-D MOTOR CO.” TIMER COVER
32691-99 Satin Chrome
SLOTTED STYLE FOOTPEGS 43280-01 (2 sets)
BILLET HEEL RESTS FOR FORWARD CONTROLS 50227-01
BILLET STYLE REAR BRAKE LEVER 42632-00
CHROME REAR CALIPER KIT 44414-01
SLIP-ON MUFFLERS,
BALONEY CUT
80375-00 Shorty Dual Style
SIX-SHOOTER REAR AXLE COVER AND ADJUSTER 48179-98A
PROFILE LOW REAR SUSPENSION 54648-00A
212
When this Deuce rumbles to life, it’s poetry in motion thanks to the elegance of its new Select Bright Pearl White-over-White Ghost Flames Paint scheme and Chrome Slotted Six-Spoke Wheels. More custom appeal is supplied by a full complement of Smooth Chrome Grips, Pegs and Pads, and other choice options like a Mini-Tach Mount Kit and Chrome-Plated Swingarm.
NEW GHOST FLAMES SELECT PAINT – BRIGHT PEARL WHITE OVER WHITE
95704-03BFJ
NEW CHROME SIX SPOKE SLOTTED CUSTOM WHEEL
43934-02 |
17" Rear |
43924-02 |
21" Front |
NEW BUCKSHOT HAND CONTROL LEVERS 45430-02
NEW DEUCE MINI TACH MOUNT KIT
69188-02
NEW BULLET STYLE SHIFT LINKAGE 34616-02
NEW BULLET SHIFT LEVER 34604-02
NEW LOW-PROFILE OSTRICH SEAT
52074-02 Icarus Pattern
HARLEY-DAVIDSON AIR CLEANER COVER 29754-01
HEADLAMP TRIM RING 69624-99A
SCREAMIN’ EAGLE CHROME FORK BRACE
46265-02
CHROME LOWER TRIPLE TREE COVER 66021-00
CHROME FRONT CALIPER KIT 44395-00
213
CLASSIC CHROME FLOATING BRAKE ROTOR
44821-00 Front
44822-00 Rear
DOMED BILLET STYLE MIRRORS 91519-99
MINI TACH KIT 67941-96B
CLEAR TURN SIGNAL LENS KIT
69303-02 Bullet
CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT 45284-99
CHROME SWITCH HOUSING KIT 70222-96
2003 fxstd Colour Shop Select Paint, Ghost Flame—Bright Pearl White over White
CONTOURED CHROME AND RUBBER CUSTOM HAND GRIPS
56459-01
CHROME PUSHROD COVER KIT 18096-00
CHROME BILLET LIFTER COVERS 18088-02
SMOOTH CHROME BILLET HEEL RESTS FOR FORWARD CONTROLS
50262-01
CHROME FORWARD CONTROL BRACKETS 33920-00
SMOOTH CHROME BRAKE PEDAL PAD
42689-02 Small
SMOOTH CHROME SHIFTER PEG 43122-01
SMOOTH CHROME BILLET FOOTPEGS
43120-01 Large
43122-01 Small
CHROME-PLATED SWINGARM FOR SOFTAIL
48442-00
CHROME REAR CALIPER KIT 44414-01
CHROME SIX SPOKE SLOTTED SPROCKET 40447-01
SLIP-ON MUFFLERS, BALONEY CUT
80381-00 Shotgun Style
214
Fat boy
On the left, accessories from the 100th Anniversary Collection are combined with Softail Leather Saddlebags and a Fat Boy Double Bucket Seat for custom mile munching, while the Fat Boy on the right announces its custom presence with new Real Fire Radical Custom Paint, matching Flame Handgrips and Mirror Chrome ThunderStar Custom Wheels.
LEFT PAGE
NEW 100TH ANNIVERSARY
BILLET COLLECTION 32113-03 Timer Cover
25001-03 Derby Cover
NEW 100TH ANNIVERSARY AIR CLEANER INSERT 29019-03
NEW RIGID CHROME SIDEPLATES 53378-03
DETACHABLE LOW-PROFILE WINDSHIELD
58651-97A Lightly Smoked
CHROME HEADLAMP NACELLE 67907-96
HEADLAMP TRIM RINGS 69627-99
HALOGEN FOG LAMP KIT 68247-98
PASSING LAMP TRIM RINGS 69622-99A
CHROME LOWER FORK SLIDERS
46482-00 Front
FAT BOY SLOTTED WHEEL
41022-00 Front
41017-00 Rear
CHROME LOWER BELT GUARD 60316-00
FAT BOY DOUBLE BUCKET SEAT 51570-00
SMOOTH SHORT RAIL BACKREST PAD
52517-94 Smooth
215
SHORT RAIL UPRIGHT 52737-94A
SOFTAIL LEATHER SADDLEBAGS 92000-00A
RIGHT PAGE
NEW REAL FIRE RADICAL CUSTOM PAINT — BLACK WITH BLUE FLAME
95710-03BFY
NEW FLAME HAND GRIPS 56518-02
NEW 100TH ANNIVERSARY BILLET AIR CLEANER INSERT
29797-02
2003 flstf/i Stock Production Paint, 100th Anniversary—Vivid Black
;
Colour Shop Radical Paint, Real Fire—Black with Blue Flame
SCREAMIN’ EAGLE EFI STAGE I KIT
29756-01
BILLET AIR CLEANER 29745-00
ENGINE/TRANSMISSION COVERS
66508-00 Side
66510-00 Top
CHROME UPPER FORK SLIDER COVERS
45963-97
CHROME LOWER FORK SLIDERS 46482-00
MIRROR CHROME THUNDERSTAR
CUSTOM WHEEL
43609-00 |
16" |
Front |
43649-00 |
16" |
Rear |
LOW-PROFILE STITCHED SEAT
52436-02 Rider Pattern
CHROME-PLATED SWINGARM FOR SOFTAIL MODELS
48442-00
LAYBACK LICENCE PLATE MOUNT 59817-00A
PROFILE LOW SUSPENSION
54596-94 Front
54648-00 Rear
216 |
217 |
Nostalgic 1930s Olive Green and Black Select Custom Paint brings out the history in this Heritage Springer, whose muted tones allow brilliant accessories like 100th Anniversary Derby and Timer Covers to shine through. Not a bike that likes to sit on a trailer, this custom vision boasts a deep-breathing Screamin’ Eagle Stage I Kit to enhance this “old-timer’s” performance.
NEW SELECT OLIVE GREEN AND BLACK 30’S STYLE NOSTALGIC CUSTOM PAINT 95711-03BFN
NEW 100TH ANNIVERSARY COVERS
32113-03 Timer
25001-03 Derby
NEW EFI FUEL FITTING COVER KIT 62883-02
NEW TURN SIGNAL RELOCATION KIT
90366-03 Rear
NEW DOCKING HARDWARE KIT 53931-03 Rear, for Rack
CLASSIC CHROME HEADLAMP VISOR 67750-88T
CLASSIC CHROME PASSING LAMP VISORS 67783-78T
PASSING LAMP TRIM RINGS 68775-93T
CLEAR TURN SIGNAL LENSES
69303-02 Bullet Style
HERITAGE SPRINGER FRONT FENDER TIP 59218-97
CLASSIC CHROME BRAKE ROTOR
44821-00 Front
44822-00 Rear
BULLSEYE CALIPER INSERT 44099-99
CLASSIC TEARDROP MIRRORS 91971-98 (pair)
NOSTALGIC HAND GRIPS 56275-96A
CHROME HAND CONTROL LEVER KIT 45075-96
CHROME SWITCH HOUSING KIT 70222-96
CHROME FRONT MASTER CYLINDER COVER 45078-96A
CHROME CLUTCH BRACKET AND MASTER CYLINDER RESERVOIR KIT
45284-99
HERITAGE SPRINGER LEATHER TANK PANEL WITH POUCH 61770-00
2003 flstsi Select Custom Paint, 30’s Style Olive and Black
FINNED HEADBOLT BRIDGE
43859-00 Black
RIDER FOOTBOARD ASSEMBLY— OLD STYLE 50599-89T (2 sets)
POLISHED STAINLESS STEEL
SHIFT LINKAGE 33814-98A Round
NOSTALGIC SHIFTER PEGS 34627-99 (2)
NOSTALGIC BRAKE PEDAL PAD 44248-96
HERITAGE SPRINGER RIDER BACKREST PAD
52826-97 Low
SOFTAIL FRAME TRIM SET 47300-88T
BLACK SOFTAIL SWINGARM AXLE COVERS 47615-95B
CHROME SPROCKET COVER 91347-00
HERITAGE SPRINGER FENDER TIP
59895-97 Rear
PROFILE LOW SUSPENSION
54648-00 Rear
HERITAGE SPRINGER SOLO RACK 53903-00
218
The Softail family’s combination of timeless styling and uncompromising, road-ready design has no equal on
the tarmac. Despite their “custom-out-of- the-crate” appearance, the Softails are built with personalisation in mind. And Genuine Motor Parts and Accessories deliver options designed to enhance your Softail’s look and feel at every turn. Drop down with Profile Low Suspension for laid-back, custom swagger, and then keep the lines long and low with the sculpted curves and custom-stitched patterns of our Exotic Seat Collection. Continue with exclusive Softail accessories like our Chrome-Plated Swingarm, built to Original Equipment specifications for unparalleled fitment and function with a brilliant finish. Slip on a detachable windshield so you can reduce fatigue on long-distance runs without
having to sacrifice your custom profile for trips around town. Or give a nod to the past with a Chrome Passing Lamp Kit, and then add the final detail with a matching Chrome Headlamp Nacelle. With Genuine Motor Parts and Accessories, custom Softail looks are just moments away.
Profile Low Rear Suspension
54648-00a, page 327
Instant
Classic
Chrome-Plated Swingarm for Softail Models
48442-00, page 296
Two-Up Custom Stitched Seat
with Ostrich Insert
53207-02, page 233
219
1Detachable King-Size Windshield
for FL Softail Models
Standard-Height, Smoked 57733-00, page 222 Low-Profile, Smoked 57734-00, page 222
2Chrome Fork Cover Kit
67890-91a, page 294
3Lighting Trim Rings
Headlamp 69626-99, page 230 Passing Lamp 69622-99a, page 230
Turn Signal 69740-01, page 230
1
2
3
220
Softail
A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS
Add to the ground-breaking style of the Deuce, while also protecting yourself from some of the elements. This windshield features a Super Sport shape and high-quality lightly smoked Lexan, along with polished stainless steel mounting brackets that offer detachable convenience. Patented.
57837-00A Fits ’00-later FXSTD models |
|
(except FXSTDSE). Installation |
|
requires the separate purchase |
|
of Docking Hardware Kit |
|
P/N 58397-00. |
$234.95 |
B. DETACHABLE COMPACT STANDARD-HEIGHT WINDSHIELD FOR SOFTAIL DEUCE MODELS
These windshields, designed specifically for the Deuce, feature partially hidden mounting brackets, a unique U-shaped support and an engraved Bar & Shield emblem for a clean look. Patented.
57090-00A Clear.
Fits ’00-later FXSTD models (except FXSTDSE). Requires separate purchase of Docking
Hardware Kit P/N 58397-00. $309.95
C. DETACHABLE COMPACT
LOW-PROFILE WINDSHIELD FOR SOFTAIL DEUCE MODELS
Detachable compact low-profile lightly smoked Lexan windshield. Mounting brackets designed to enhance clean style of the Deuce. Patented.
57824-00A Lightly Smoked.
Fits ’00-later FXSTD models (except FXSTDSE). Requires separate purchase of Docking
Hardware Kit P/N 58397-00. $299.95
SOFTAIL DEUCE DETACHABLE WINDSHIELD DOCKING HARDWARE
(not shown) (Patented)
58397-00 Required for installation |
|
of detachable windshields |
|
on ’00-later FXSTD models |
|
(except FXSTDSE). |
$69.95 |
A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
|
|
|
B. DETACHABLE COMPACT |
|
C. DETACHABLE COMPACT |
STANDARD-HEIGHT WINDSHIELD |
|
LOW-PROFILE WINDSHIELD |
FOR SOFTAIL DEUCE MODELS |
|
FOR SOFTAIL DEUCE MODELS |
221
Softail
Windshields
D. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS
Super is an apt description for this do-it-all shield. Detachable convenience. Harley-Davidson sport styling. High-quality, lightly smoked Lexan that shields you from the elements. Patented.
57965-97A Fits ’84-later FXST, FXSTC, FXSTB, ’93-later FXDWG, ’80-’86 FXWG. (Does not fit FXSTD.) Use Docking Hardware Kit
P/N 58350-96.
DOCKING HARDWARE
FOR DETACHABLE WINDSHIELDS (Patented)
For 41mm Forks.
58350-96 |
Required for installation |
|
|
of Detachable Windshields |
|
|
P/Ns 58340-96, 58341-96, |
|
|
57965-97A, 58627-99. |
$69.95 |
E. SPORT WINDSHIELD KIT FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS
Formed of Lexan polycarbonate and hard-coated to resist scratching. Lightly smoked with Bar & Shield Winged logo. Contoured to fit headlamp and incorporates adjustable four-point mounting. Functional styling helps deflect wind to reduce upper body fatigue.
91820-85A Fits ’84-later FXST, FXSTB, FXSTC, and ’93-later FXDWG
and ’86-earlier FXWG models. $149.95
F. COMPACT WINDSHIELD KIT FOR SOFTAIL CUSTOM MODELS
Formed of tough Lexan polycarbonate and hard-coat- ed to resist scratching. Unique mounting system utilizes die-cast fork slider clamps which are designed for height adjustment and are hand-polished and chrome-plated. Chrome windshield cross braces offer traditional Harley-Davidson styling. Mounts easily, can be quickly removed.
58025-91B Fits ’84-later FXST, FXSTC,
FXSTB and ’86-earlier FXWG models. (Does not fit FXDWG and FXSTD models.) Will not fit with Chrome Billet Mini Tach Mount
P/N 68960-98.
D.DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS
|
|
|
|
E. SPORT WINDSHIELD KIT |
F. COMPACT WINDSHIELD KIT |
Notice: The prices appearing in this catalogue are the |
|
FOR SOFTAIL CUSTOM AND |
FOR SOFTAIL CUSTOM MODELS |
manufacturer’s suggested retail prices. Actual retail |
|
DYNA WIDE GLIDE MODELS |
|
prices may vary. |
|
|
|
|
222
Softail
Windshields
DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS
Get the convenience of detachables and the look of lightly smoked Lexan in one easy-to-install windshield. This windshield is formed from a hard-coated polycarbonate that resists scratching and abrasion. Because it is designed to work with detachable docking hardware, this windshield comes on or off in less than 60 seconds without tools. Patented.
A. Standard-Height, Lightly Smoked
58627-99 Fits ’84-later FXST, FXSTB, FXSTC and ’93-later FXDWG. Requires installation of Docking Hardware Kit P/N 58350-96. Will not fit with Chrome Billet Mini Tach Mount P/N 68960-98.
B. Standard-Height, Clear
58340-96 Fits ’84-later FXST, FXSTC, FXSTB, and ’93-later FXDWG,
’80-’86 FXWG. (Does not fit FXSTD.) Requires separate purchase of Windshield Docking Hardware Kit P/N 58350-96. Will not fit with Chrome Billet Mini Tach Mount
P/N 68960-98.
C. Low-Profile, Lightly Smoked
58341-96 Fits ’84-later FXST, FXSTC, FXSTB, and ’93-later FXDWG,
’80-’86 FXWG. (Does not fit FXSTD.) Requires separate purchase of Windshield Docking Hardware Kit P/N 58350-96. Will not fit with Chrome Billet Mini Tach Mount
P/N 68960-98.
DOCKING HARDWARE
FOR DETACHABLE WINDSHIELDS (Patented)
For 41mm Forks.
58350-96 |
Required for installation |
|
|
of Detachable Windshields |
|
|
P/Ns 58340-96, 58341-96, |
|
|
57965-97A, 58627-99. |
$69.95 |
SOFTAIL DETACHABLE
KING-SIZE WINDSHIELDS FOR USE WITH PASSING LAMPS
This one-piece Lexan windshield is formed from hardcoated polycarbonate material to resist scratching. The Lexan is attached to highly-polished stainless steel mounting brackets supported by moulded-rub- ber bushings for improved isolation. It is offered in a standard-height clear or lightly smoked, Lexan or three-inch lower than stock, low-profile lightly smoked Lexan. (Chrome Wind Deflector Kit P/N 58125-90A can be used with this windshield kit on ’99-earlier models.) Patented.
D. Three-inch, Low-Profile, Lightly Smoked
57734-00 |
Fits ’00-later FLSTC models. |
|
|
(Additional mounting hardware |
|
|
not required.) |
$334.95 |
58275-95 |
Fits ’86-’99 FLSTC and ’90-later |
|
|
FLSTF, FLSTN models with passing |
|
|
lamps. Includes mounting hardware. |
|
|
(Does not fit FLSTS.) |
$369.95 |
E. Standard-Height, Clear
58240-95 Fits ’86-’99 FLSTC and ’90-later FLSTF, FLSTN models with passing lamps. Includes mounting hardware. (Stock on ’00 FLSTC.)
(Does not fit FLSTS.)
Standard-Height, Lightly Smoked (not shown)
57733-00 |
Fits ’00-later FLSTC models. |
|
|
(Additional mounting hardware |
|
|
not required.) |
$334.95 |
58628-99 |
Fits ’86-’99 FLSTC and ’90-later |
|
|
FLSTF, FLSTN models with passing |
|
|
lamps. Includes mounting hardware. |
|
|
(Does not fit FLSTS.) |
$369.95 |
A.DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, LIGHTLY SMOKED
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
B.DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, CLEAR
C.DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS – LOW-PROFILE, LIGHTLY SMOKED
D.SOFTAIL DETACHABLE KING-SIZE WINDSHIELD KIT FOR USE WITH PASSING LAMPS – THREE-INCH, LOW-PROFILE, LIGHTLY SMOKED
223
Softail
Windshields
F. DETACHABLE KING-SIZE WINDSHIELDS FOR FL SOFTAIL MODELS WITHOUT PASSING LAMPS
The Lexan windshield is formed from hard-coated polycarbonate material to resist scratching and abrasion. Polished stainless steel mounting brackets are supported by moulded-rubber bushings for improved isolation. It is offered in a standard-height clear Lexan or three-inch lower than stock, low-profile lightly smoked Lexan. Comes complete with all the hardware required to fit FLSTC, FLSTF and FLSTN models without passing lamps. (Chrome Wind Deflector Kit P/N 58125-90A can be used with this windshield kit on ’99-earlier models. Windshield will not fit with passing lamps.) Patented.
Standard-Height, Clear |
|
|
58243-95 |
Fits ’86-’99 FLSTC, and ’90-later |
|
|
FLSTF, FLSTN models without passing |
|
|
lamps. (Does not fit FLSTS.) |
$339.95 |
Three-inch, Low-Profile, Lightly Smoked |
||
58278-95 |
Fits ’86-’99 FLSTC, and ’90-later |
|
|
FLSTF, FLSTN models without passing |
|
|
lamps. (Does not fit FLSTS.) |
$364.95 |
REPLACEMENT WINDSHIELDS (not shown)
Change the look of your Heritage Softail Classic by replacing your clear windshield with the darker hue of lightly smoked Lexan, now in standard-height. Use your existing hardware for a quick and easy change.
Standard-Height, Lightly Smoked
Replacement Lexan
57977-99 |
Fits ’86-later FLSTC, FLSTF, |
|
|
FLSTN models equipped |
|
|
with permanently mounted |
|
|
King-Size Windshields. |
$144.95 |
Standard-Height, Lightly Smoked |
|
|
Replacement Lexan (not shown) |
|
|
57975-99 |
Fits ’86-later FLSTC, FLSTF, |
|
|
FLSTN models equipped with a |
|
|
Detachable King-Size Windshield. |
|
|
(Does not fit FLSTS.) |
$149.95 |
Low-Profile, Lightly Smoked |
|
|
Replacement Lexan |
|
|
58316-95A |
Fits ’86-later FLSTC, FLSTF, |
|
|
FLSTN models equipped with |
|
|
a permanently mounted |
|
|
King-Size Windshield. |
|
|
(Does not fit FLSTS.) |
$134.95 |
Low-Profile, Lightly Smoked |
|
|
Replacement Lexan |
|
|
(not shown) |
|
|
58277-95 |
Fits ’86-later FLSTC, FLSTF, |
|
|
FLSTN models equipped with a |
|
|
Detachable King-Size Windshield. |
|
|
(Does not fit FLSTS.) |
$144.95 |
|
|
|
E. SOFTAIL DETACHABLE KING-SIZE |
F. DETACHABLE KING-SIZE WINDSHIELDS |
|
WINDSHIELDS FOR USE WITH PASSING |
FOR FL SOFTAIL MODELS WITHOUT PASSING |
|
LAMPS – STANDARD-HEIGHT, CLEAR |
LAMPS – STANDARD-HEIGHT, CLEAR |
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
224
Softail
Windshields
DETACHABLE KING-SIZE
NACELLE WINDSHIELD
Fits Softail models equipped with the Street Stalker Headlamp Nacelle or the Chrome Headlamp Nacelle Kit. Available for models with and without passing lamps. Patented.
A. Standard-Height, Clear |
|
|
58649-97A |
Fits ’86-later FLSTC, FLSTF and |
|
|
FLSTN models equipped with |
|
|
the Chrome Headlamp Nacelle |
|
|
Kit P/N 67907-96. Fits with |
|
|
passing lamps. |
$359.95 |
B. Low-Profile, Lightly Smoked |
|
|
58651-97A |
Fits ’86-later FLSTC, FLSTF and |
|
|
FLSTN models equipped with |
|
|
the Chrome Headlamp Nacelle Kit |
|
|
P/N 67907-96. Fits with |
|
|
passing lamps. |
$384.95 |
C. Standard-Height, Clear |
|
|
58652-97A |
Fits without passing lamps. |
$359.95 |
Low-Profile, Lightly Smoked (not shown) |
|
|
58653-97A |
Fits without passing lamps. |
$384.95 |
REPLACEMENT WINDSHIELDS (not shown)
Standard-Height, Clear Replacement Lexan
58657-97A Fits ’86-later FLSTC, FLSTF |
|
and FLSTN models equipped |
|
with the Chrome Headlamp |
|
Nacelle Kit P/N 67907-96. |
$134.95 |
Low-Profile, Lightly Smoked |
|
Replacement Lexan |
|
58658-97A Fits ’86-later FLSTC, FLSTF |
|
and FLSTN models equipped |
|
with the Chrome Headlamp |
|
Nacelle Kit P/N 67907-96. |
$144.95 |
A. DETACHABLE KING-SIZE NACELLE WINDSHIELD – STANDARD-HEIGHT, CLEAR
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
|
|
|
B. DETACHABLE KING-SIZE |
|
C. DETACHABLE KING-SIZE |
NACELLE WINDSHIELD – |
|
NACELLE WINDSHIELD – |
LOW-PROFILE, LIGHTLY SMOKED |
|
STANDARD-HEIGHT, CLEAR |
Upper Position
Lower Position
D. ADJUSTABLE HEIGHT WINDSHIELD FOR FL SOFTAIL MODELS
|
225 |
NEW |
|
|
Softail |
|
|
|
Windshields |
D. ADJUSTABLE HEIGHT
WINDSHIELD FOR FL SOFTAIL MODELS
This two-piece detachable windshield allows you to tailor the screen height for maximum riding comfort. The simple cam-lever adjustment permits the clear upper section to be raised from 17" to 20" (measured from the headlamp cut-out) to provide maximum weather protection and visability. The dark-tinted lower section conceals the adjustment feature, and small raised dots provide vibration isolation. Patent pending.
57704-02 Fits ’00-later FLSTC models. Mounts using Original Equipment
windshield docking hardware. $419.95
57703-02 Fits ’86-’99 FLSTC, ’90-later FLSTF and FLSTN models equipped with passing lamps. Includes required
docking hardware. |
$454.95 |
KING-SIZE WINDSHIELDS – RIGID MOUNT
The Lexan windshield is formed from hard-coated, lightly smoked polycarbonate material to resist scratching and abrasion. The windshield comes with mounting brackets that are adjustable for various height settings and is a direct replacement for FLSTC models. This windshield can also be installed on FLSTF and FLSTN models with the addition of mounting bracket kit P/N 58155-90.
E. Low-Profile, Lightly Smoked
58319-95A Fits ’86-’99 FLSTC, and ’90-later FLSTF, FLSTN models (FLSTF and FLSTN require mounting bracket kit P/N 58155-90). (Does not fit FLSTS.)
F. Standard-Height, Clear
58018-86A Fits ’86-’99 FLSTC, and ’90-later FLSTF, FLSTN models (FLSTF and FLSTN require mounting bracket kit P/N 58155-90). (Does not fit FLSTS.)
FLSTF/FLSTN Windshield Bracket Kit
(not shown)
Includes brackets, chrome acorn lock nuts, and installation instructions.
58155-90 Required to install King-Size |
|
Lexan Windshield Kit P/N |
|
58018-86 on ’90-later FLSTF |
|
and FLSTN models. |
$13.95 |
RIGID-MOUNTED REPLACEMENT LEXAN
Standard-Height, Clear
58516-97 Fit ’86-later FLSTF, FLSTN and
’86-’99 FLSTC models equipped
with the Chrome Headlamp
Nacelle Kit P/N 67907-96.
E.KING-SIZE RIGID MOUNT WINDSHIELDS – LOW-PROFILE, LIGHTLY SMOKED
F.KING-SIZE RIGID MOUNT WINDSHIELDS – STANDARD-HEIGHT, CLEAR
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
226
Softail
Windshields
A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS
Super is an apt description for this do-it-all shield. Detachable convenience. Harley-Davidson sport styling. High-quality, lightly smoked Lexan that shields you from the elements. Patented.
57969-97A Fits ’93-later FXSTS, FXSTSB |
|
models. Use Docking Hardware |
|
Kit P/N 58907-96. Will not fit |
|
with Chrome Billet Mini Tach |
|
Mount P/N 67848-00. |
$204.95 |
B. COTTON WINDSHIELD STORAGE BAG
This bag is constructed of breathable cotton material and is flannel-lined for a scratch-free storage area. The outside of the bag features an embroidered Bar & Shield logo to match the cotton cycle covers.
95982-98 Fits all Harley-Davidson
windshields. $64.95
C. SPRINGER SPORT WINDSHIELD KIT
Formed of Lexan polycarbonate and hard-coated to resist scratches. Lightly smoked with Bar & Shield Winged logo and contoured to complement the Springer front fork styling. Four-point adjustable mounting system. Designed to fit with or without Springer Passing Lamp Kit P/N 68253-88A and Springer Horn Kit P/N 69036-88A.
58029-89B Fits ’88-later FXSTS models and Softail models equipped with Springer Front End Kit P/N 46007-88A.
(Does not fit FLSTS models.)
DOCKING HARDWARE FOR DETACHABLE WINDSHIELDS
(not shown) (Patented)
58907-96 Required for installation of Detachable Windshields on ’93-later FXSTS, FXSTSB and ’97-later FLSTS models.
58350-96 Required for installation
of Detachable Windshields
P/Ns 58340-96, 58341-96, 57965-97A, 58627-99.
A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the B. COTTON WINDSHIELD STORAGE BAG C. SPRINGER SPORT WINDSHIELD KIT manufacturer’s suggested retail prices. Actual retail
prices may vary.
227
Softail
Windshields
COMPACT DETACHABLE WINDSHIELD
FOR SPRINGER SOFTAIL MODELS (Patented)
D. Standard-Height, Clear
58770-96 Fits ’93-later FXSTS and FXSTSB; ’97-later FLSTS models. Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96. (Will fit with or without passing lamps.) Will not
fit with Chrome Billet Mini Tach Mount P/N 67848-00.
E. Low-Profile, Lightly Smoked
58771-96 Fits ’93-later FXSTS and FXSTSB; ’97-later FLSTS models. Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96. (Will fit with or without passing lamps.) Will not
fit with Chrome Billet Mini Tach Mount P/N 67848-00.
F. COMPACT WINDSHIELD KIT FOR SPRINGER SOFTAIL MODELS
Formed of Lexan polycarbonate and hard-coated to resist scratches. Features chrome mounting brackets. Adjustable to various height settings. Designed to fit with or without Springer Passing Lamp Kit P/N 6825388A and Springer Horn Kit P/N 69036-88A.
58044-88C Fits ’88-later FXSTS models.
Also fits Softail models equipped with Springer Front End Kit P/N 46007-88A. (Does not fit FLSTS models.) $294.95
D.COMPACT DETACHABLE WINDSHIELD FOR SPRINGER SOFTAIL MODELS – STANDARD-HEIGHT, CLEAR
E.COMPACT DETACHABLE WINDSHIELD FOR SPRINGER SOFTAIL MODELS – LOW-PROFILE, LIGHTLY SMOKED
F.COMPACT WINDSHIELD KIT FOR SPRINGER SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
228
Softail
Windshields
HERITAGE SPRINGER KING-SIZE
DETACHABLE WINDSHIELD (Patented)
A. Standard-Height, Clear
58772-97 Fits ’97-later FLSTS models. Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96. Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00.
B. Low-Profile, Lightly Smoked
58783-97 Fits ’97-later FLSTS models. Installation requires separate purchase of Windshield Docking Hardware Kit P/N 58907-96. Will not fit with Chrome Billet Mini Tach Mount P/N 67848-00.
C. HERITAGE SPRINGER
KING-SIZE WINDSHIELDS
This one-piece, classic King-Size windshield completes the nostalgic look. Includes chrome-plated steel mounting brackets.
Standard-Height, Clear |
|
|
58533-97A |
Fits ’97-later FLSTS |
|
|
Heritage Springer. |
$299.95 |
Low-Profile, Lightly Smoked |
|
|
58534-97A |
Fits ’97-later FLSTS |
|
|
Heritage Springer. |
$324.95 |
A. HERITAGE SPRINGER KING-SIZE DETACHABLE WINDSHIELD – STANDARD-HEIGHT, CLEAR
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
|
|
|
B. HERITAGE SPRINGER KING-SIZE |
|
C. HERITAGE SPRINGER |
DETACHABLE WINDSHIELD – |
|
KING-SIZE WINDSHIELDS – |
LOW-PROFILE, LIGHTLY SMOKED |
|
STANDARD-HEIGHT, CLEAR |
NEW
D. COLOUR-MATCHED HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)
NEW
229
Softail
Headlamp Visor Kits
D. COLOUR-MATCHED
HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)*
Add an element of racy style to stock headlamps with these visors, available in prime or high-quality, colourmatched Harley-Davidson paint.
Fits ’84-’99 FXST, FXSTC and ’91-later FXDWG.
*NOTE: This product is a “paint to order” accessory. Please allow an average of 5 weeks delivery for this item.
Refer to the Colour Shop section for a complete listing of colour options.
E. CHROME HEADLAMP VISOR KIT
Add an element of racy style to stock headlamps with these visors. Kit includes necessary mounting hardware.
69728-01 Fits ’91-later FXDWG models |
|
|
|
and ’84-’99 FXST and FXSTC |
|
|
|
models (except FXSTB). |
$174.95 |
|
|
|
|
|
|
|
|
|
|
D. COLOUR-MATCHED HEADLAMP |
E. CHROME HEADLAMP VISOR KIT |
Notice: The prices appearing in this catalogue are the |
VISOR KITS (DYNA WIDE GLIDE/ |
|
manufacturer’s suggested retail prices. Actual retail |
SOFTAIL CUSTOM) |
|
prices may vary. |
|
|
230
Softail
A. HEADLAMP TRIM RINGS
This chrome-plated headlamp trim ring extends forward, giving the headlamp assembly a “Frenched” look reminiscent of classic hot rod car designs by recessing the headlamp and adding the appearance of depth. Functions as a direct replacement for the Original Equipment trim ring, except when used with P/N 69627-99, where it easily installs over the Original Equipment trim ring. Patented. (Does not fit with Accessory Headlamp Visor or Passing Lamp Visor.)
After
69627-99 Fits ’83-later Touring models (except Tour Glide and Road Glide). Fits ’94-later FLHR models and ’86-later FLST models with accessory Chrome Headlight Nacelle P/N 67907-96.
69626-99 Fits ’94-later FLSTC, FLSTF and
FLSTN models. (not shown)
69623-99A Fits ’94-later FXST, FXSTB, FXSTC,
FXLR and Dyna models. |
$28.95 |
69624-99A Fits ’93-later FXSTS, ’95-’97 FXSTSB, ’96-later XL 1200C, XL 883C, ’99 FXR models and ’97-later FLSTS models.
Also fits FXSTD models.
PASSING LAMP TRIM RINGS
A must-have complement to the Headlamp Trim Ring, these chrome-plated passing lamp trim rings provide the same “Frenched” look for passing lamps. Function as a direct replacement for the Original Equipment trim rings. Includes chrome hardware. Sold in pairs. Patented.
69622-99A Fits all ’62-later models with passing lamps. Fits accessory Passing
Lamps Kit P/N 68250-80. (pair) $39.95
TURN SIGNAL TRIM RING KIT
Complete the “Frenched” look with these Turn Signal
Trim Rings. The chrome-plated trim rings match the Before styling of Headlamp and Passing Lamp Trim Rings
69622-99A, 69626-99, and 69627-99. Easy to install, the kit includes two trim rings.
69740-01 Fits front or rear of ’88-later Touring and Heritage Softail Classic
models, and Softail models equipped with Turn Signal Relocation Kit
P/N 68413-99 or 68412-99.
A. HEADLAMP, PASSING LAMP AND TURN SIGNAL TRIM RINGS – ROAD KING AND FL SOFTAIL
Before |
|
After |
|
|
|
Notice: The prices appearing in this catalogue are the FXSTC BEFORE HEADLAMP TRIM RING FXSTC AFTER HEADLAMP TRIM RING manufacturer’s suggested retail prices. Actual retail
prices may vary.
Before
After
FLSTS AFTER HEADLAMP TRIM RING AND PASSING LAMP TRIM RINGS
231
Softail
Trim Rings
Trim ring contour matches the turn signal housing and extends out past the lens for a sleek appearance. These easy-to-install chrome-plated trim rings with amber or red lenses look great alone, or in combination with Headlamp Trim Rings. Sold in pairs. From the workshop of Wyatt Fuller.
B. Amber
69739-01 Fits all models equipped with
bullet style turn signals (except VRSC rear signals and rear of models with Auxiliary Turn Signal Brake Light Kits P/N 68216-00 and 91698-02). $29.95
C. Red
69736-02 Fits rear of all models (except VRSC and International models) equipped with bullet style turn signals and Auxiliary Brake light Kit P/N 68216-00 or 91698-02.
Not for International use.
|
|
|
|
B. BULLET TURN SIGNAL |
C. BULLET TURN SIGNAL TRIM RING KIT – RED |
Notice: The prices appearing in this catalogue are the |
|
TRIM RING KIT – AMBER |
|
manufacturer’s suggested retail prices. Actual retail |
prices may vary.
exotic Seats
The very latest from the Harley-Davidson Exotic Seat Collection, these limited production Custom Stitched saddles combine superior construction with radical styling to give you the ultimate custom accessory.
With contoured foam padding for added longhaul comfort, each seat is made from top grain
leathers for superior wear and attitude with age. Decorative custom-stitching and available ostrich leather inserts leave no doubt about your attention to custom detail. Seat pans are constructed from hand-laid fibreglass for extra durability, and carpeted to protect your paint finish. When it’s time to flex your custom muscles, the Harley-Davidson Exotic Seat Collection has the style you’re after.
|
|
|
Rider Pattern |
Icarus Pattern |
|
with Ostrich |
||
|
Sweep Pattern
Scorpion Pattern
Fire Pattern with Ostrich
Axe Pattern
Turbulence Pattern
Scimitar Pattern
Axe II Pattern
Menace Pattern
NEW
A. SOLO OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN
NEW
B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN
NEW
233
Softail
A. SOLO OSTRICH SEAT
FOR SOFTAIL MODELS
Ride low-down in high style on this limited-production custom solo seat. Made from the highest quality materials, this custom stitched seat features a natural ostrich skin insert, cowhide seating surface, and contoured foam padding for long-haul comfort. Seat has no visible mounting hardware for a clean custom look. Seat width: 12".
Ostrich Seat – Fire Pattern |
|
|
51252-02 |
Fits ’00-later FXSTD |
|
|
models (shown). |
$469.00 |
51260-02 |
Fits ’00-later Softail models |
|
|
(except FXSTD and FLSTS). |
$469.00 |
Ostrich Seat – Icarus Pattern |
|
|
53262-02 |
Fits ’00-later Softail models (except |
|
|
FXSTD and FLSTS models). |
$469.00 |
52082-02 |
Fits ’00-later FXSTD models. |
$469.00 |
B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS*
The ultimate seat profile for your slammed ride, this low-profile limited-production seat hugs the frame and fender for a long and lean look. Crafted from premium cowhide and natural ostrich leathers, this premiere seat is constructed with a hand-laid fiberglass shell and high density padding for superior wear. Seat width: 13". Pillion width: 5".
Ostrich Seat – Fire Pattern |
|
|
|
|
51251-02 |
Fits ’00-later FXSTD |
|
|
|
|
models. Does not fit with |
|
|
|
|
Sissy Bar Upright |
|
|
|
|
P/N 51114-00 or 51144-02. |
$499.00 |
|
|
51259-02 |
Fits ’00-later Softail |
|
|
|
|
models (except FXSTD |
|
|
|
|
|
|
|
|
|
and FLSTS) (shown). |
$499.00 |
|
|
Ostrich Seat – Icarus Pattern |
|
|
|
|
53253-02 |
Fits ’00-later Softail |
|
|
|
|
models (except FXSTD |
|
|
|
|
and FLSTS models). |
$499.00 |
|
|
52074-02 |
Fits ’00-later FXSTD |
|
|
|
|
models (Does not fit with |
|
|
|
|
Sissy Bar Upright P/Ns |
|
|
|
|
51114-00 and 51144-02). |
$499.00 |
|
|
C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS*
The two-up profile of this limited-production custom seat maintains a lean look, but adds back support for the rider, and additional padding for the passenger. Made of the highest quality cowhide, and featuring a one-of-a-kind genuine ostrich insert, this premium seat offers a radical style with a touch of comfort. Seat width: 13". Pillion width: 6".
Ostrich Seat – Fire Pattern |
|
|
51250-02 |
Fits ’00-later FXSTD models. |
$499.00 |
51258-02 |
Fits ’00-later Softail |
|
|
models (except FXSTD |
|
|
and FLSTS) (shown). |
$499.00 |
Ostrich Seat – Icarus Pattern |
|
|
53207-02 |
Fits ’00-later Softail |
|
|
models (except FXSTD |
|
|
and FLSTS models). |
$499.00 |
52049-02 |
Fits ’00-later FXSTD models. |
$499.00 |
|
*NOTE: Two-up seats and seats with passenger |
|
pillions require the use of a grab strap. See your |
|
Harley-Davidson dealer for correct grab strap part |
|
number if not included in seat kit. |
|
NOTE: These seats are “made to order” please allow |
|
1 – 2 weeks for delivery. |
C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS – FIRE PATTERN |
Notice: The prices appearing in this catalogue are the |
|
manufacturer’s suggested retail prices. Actual retail |
|
prices may vary. |
234
Softail
A. SOFTAIL TWO-UP EXOTIC
OSTRICH SEAT WITH CUSTOM PILLION
Combine the long and lean styling of our low-profile exotic seat with the back support of the two-up seat, and you get the best of both worlds. These cowhide saddles feature ostrich inserts, custom-stitched surfaces and a tapered pillion for style, and a rider position designed for comfort. Seat width: 13”. Pillion width: 5”.
Icarus Pattern
53534-02 Fits ’00-later Softail models (except
FXSTD and FLSTS models). |
$499.00 |
B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS
Add a splash of colour behind your Deuce model’s Solo Seat while hiding the rear fender’s Sissy Bar Upright mounting holes with these exclusive colourmatched Tail Sections.
Fits ’00-later FXSTD models equipped with any GMA Solo Seat for FXSTD models.
Refer to page 249 for a
complete listing of colour options.
C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS
When it’s time to go it alone, go solo in style. These premium quality cowhide leather saddles are highlighted with custom stitched patterns to create a subtle and distinctive look, and feature “invisible” mounting hardware for a clean appearance. Seat width: 12".
Deuce
Fits ’00-later FXSTD models.
51060-02 |
Axe Pattern. |
$349.00 |
51061-02 |
Rider Pattern. |
$349.00 |
51062-02 |
Scorpion Pattern. |
$349.00 |
51063-02 |
Sweep Pattern. |
$349.00 |
52078-02 |
Axe II Pattern. |
$349.00 |
52079-02 |
Turbulence Pattern. |
$349.00 |
52080-02 |
Menace Pattern. |
$349.00 |
52081-02 |
Scimitar Pattern. |
$349.00 |
53292-02 |
Plain. |
$319.00 |
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
51076-02 |
Axe Pattern. |
$349.00 |
51077-02 |
Rider Pattern. |
$349.00 |
51078-02 |
Scorpion Pattern. |
$349.00 |
51079-02 |
Sweep Pattern. |
$349.00 |
53254-02 |
Axe II Pattern. |
$349.00 |
53256-02 |
Turbulence Pattern. |
$349.00 |
53257-02 |
Menace Pattern. |
$349.00 |
53259-02 |
Scimitar Pattern. |
$349.00 |
53359-02 |
Plain. |
$319.00 |
D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS*
Another extraordinary installment from the Exotic Seat Collection, these leather Low-Profile saddles feature custom stitched patterns and smooth lines to create a subtle and distinctive custom effect. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 5".
Deuce
Fits ’00-later FXSTD models. Does not fit with Sissy Bar Upright P/N 51114-00 or 51144-02.
52365-02 |
Axe Pattern. |
$369.00 |
52368-02 |
Sweep Pattern. |
$369.00 |
52366-02 |
Rider Pattern. |
$369.00 |
52367-02 |
Scorpion Pattern. |
$369.00 |
52055-02 |
Axe II Pattern. |
$369.00 |
52056-02 |
Turbulence Pattern. |
$369.00 |
52057-02 |
Menace Pattern. |
$369.00 |
52058-02 |
Scimitar Pattern. |
$369.00 |
53289-02 |
Plain. |
$339.00 |
(continued at top of next page)
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
NEW
A. SOFTAIL TWO-UP EXOTIC OSTRICH SEAT WITH CUSTOM PILLION – ICARUS PATTERN
B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS
NEW
C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – SCIMITAR PATTERN
NEW
D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS – PLAIN
NEW
E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – AXE PATTERN
NEW
F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS – SWEEP PATTERN
235
Softail
(continued from bottom of previous page)
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
52423-02 |
Axe Pattern. |
$369.00 |
52458-02 |
Sweep Pattern. |
$369.00 |
52436-02 |
Rider Pattern. |
$369.00 |
52457-02 |
Scorpion Pattern. |
$369.00 |
53208-02 |
Axe II Pattern. |
$369.00 |
53224-02 |
Turbulence Pattern. |
$369.00 |
53226-02 |
Menace Pattern. |
$369.00 |
53227-02 |
Scimitar Pattern. |
$369.00 |
53367-02 |
Plain. |
$339.00 |
E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS*
Share your custom ride. The two-up design of these premium cowhide leather seats offers a frame hugging look, but adds back support for the rider, and additional padding for the passenger. The custom stitched design on the seating surface, and the hand-laid fiberglass seat base show attention to detail second to none. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 6".
Deuce
Fits ’00-later FXSTD models.
51064-02 |
Axe Pattern. |
$369.00 |
|
|
51065-02 |
Rider Pattern. |
$369.00 |
|
|
51066-02 |
Scorpion Pattern. |
$369.00 |
|
|
|
||||
51067-02 |
Sweep Pattern. |
$369.00 |
|
|
52019-02 |
Axe II Pattern. |
$369.00 |
|
|
52021-02 |
Turbulence Pattern. |
$369.00 |
|
|
52029-02 |
Menace Pattern. |
$369.00 |
|
|
52040-02 |
Scimitar Pattern. |
$369.00 |
|
|
53288-02 |
Plain. |
$339.00 |
|
|
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS models).
51080-02 |
Axe Pattern. |
$369.00 |
51081-02 |
Rider Pattern. |
$369.00 |
51082-02 |
Scorpion Pattern. |
$369.00 |
51083-02 |
Sweep Pattern. |
$369.00 |
53160-02 |
Axe II Pattern. |
$369.00 |
53161-02 |
Turbulence Pattern. |
$369.00 |
53162-02 |
Menace Pattern. |
$369.00 |
53192-02 |
Scimitar Pattern. |
$369.00 |
53368-02 |
Plain. |
$339.00 |
F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS*
Combine the long and lean styling of our low-profile exotic seat with the back support of the two-up seat, and you get the best of both worlds. These cowhide saddles feature custom stitched surfaces and a sleek tapered pillion for style, and a rider position designed for comfort. Or go with a smooth cover for that simple custom look. Seat width: 13". Pillion width: 5".
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
51285-02 |
Axe Pattern. |
$369.00 |
51286-02 |
Rider Pattern. |
$369.00 |
51287-02 |
Scorpion Pattern. |
$369.00 |
51288-02 |
Sweep Pattern. |
$369.00 |
52013-02 |
Axe II Pattern. |
$369.00 |
53390-02 |
Turbulence Pattern. |
$369.00 |
53401-02 |
Menace Pattern. |
$369.00 |
53402-02 |
Scimitar Pattern. |
$369.00 |
53403-02 |
Plain. |
$339.00 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
NOTE: These seats are “made to order” please allow 1 – 2 weeks for delivery.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
236
Softail
Custom Seats
A. SOFTAIL LEATHER
It’s the traditional Badlander seat style enhanced with supple top-grain leather. Includes leather care product, seat, grab strap and mounting hardware. Seat width 12.0"; Passenger Pillion width 6.5".
52361-00 |
Fits all ’00-later Softail |
|
|
models (except FLSTS |
|
|
and FXSTD). (shown) |
$239.95 |
52361-97 |
Fits all ’84-’99 Softail models |
|
|
(except FLSTS). (inset) |
$234.95 |
NOTE: These Harley-Davidson seats are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials used to construct your seat or backrest. The appearance of scars or marks on the leather are a result of using natural leather panels and should not be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect your investment.
B. SOFTAIL BADLANDER SEAT*
Clean smooth covers, subtle top-stitching, and two embroidered “Harley-Davidson” logos add up to a statement only Harley could create. The low, lean look also offers the benefit of a reduced seat height, ideal for riders wanting the lowest possible seat height. Includes a passenger grab strap, integrated chrome rear mounting bracket, seat mounting screw, and installation instructions. Seat width 11.5"; passenger pillion width 5.5".
52292-00 |
Fits all ’00-later Softail |
|
|
models (except FLSTS |
|
|
and FXSTD).(shown) |
$199.95 |
52292-94B |
Fits all ’84-’99 Softail |
|
|
models (except FLSTS). |
$199.95 |
C. SOFTAIL CUSTOM SEAT* WITH SNAKESKIN PRINT
Sleek and low style. The Bar & Shield logo adds the finishing touch! Seat width 11.5", passenger pillion width 5.0".
51910-00 Fits all ’00-later |
|
Softail models (except |
|
FLSTS and FXSTD). |
$229.95 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
A. SOFTAIL LEATHER BADLANDER SEAT
B. SOFTAIL BADLANDER SEAT
C. SOFTAIL CUSTOM SEAT WITH SNAKESKIN PRINT
D. LEATHER BADLANDER SEAT FOR SOFTAIL DEUCE
E. BADLANDER SEAT FOR SOFTAIL DEUCE
F. SNAKESKIN SEAT FOR SOFTAIL DEUCE MODELS
237
Softail
D. LEATHER BADLANDER SEAT* FOR SOFTAIL DEUCE
Accentuate the sleek lines of your Softail Deuce with the low look of the Badlander Seat. Enhanced with supple top grain leather and a new embroidered Bar & Shield logo, this complete package includes leather care product, seat, and grab strap. Seat width 12.0"; Passenger Pillion width 6.5".
51548-01 Fits ’00-later FXSTD models. $269.95
E. BADLANDER SEAT FOR SOFTAIL DEUCE*
The Badlander has built its reputation as a true street custom and now it’s available for the Deuce. Clean smooth covers, subtle top-stitching, and two embroidered “Harley-Davidson” logos add up to a statement only Harley-Davidson could create. The low, lean look also offers the benefit of a reduced seat height, ideal for riders wanting the lowest possible ride. Includes all necessary mounting hardware. Seat width is 12.0"; passenger pillion width is 6.5".
52461-00 Fits ’00-later FXSTD models. $199.95
F. SNAKESKIN SEAT*
FOR SOFTAIL DEUCE MODELS
As if the sleek and low style of this seat didn’t get you close enough to the ground, the simulated snakeskin print lets you slither down the street with even more custom style. Designed for the Deuce, the seat includes all necessary mounting hardware. Seat width is 12.0"; passenger pillion width is 7.0".
52463-00 Fits ’00-later FXSTD models. $229.95
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
238
Softail
SOFTAIL SEATS WITH RIDER BACKRESTS
These seats are the most adjustable of their kind on the market. A patented design, integrated fuel spring makes the backrest angle infinitely adjustable through a 30-degree range with the touch of a concealed, integrated, yet easy-to- reach lever. The backrest removes easily and has a push-button-activated, five-position, 1.5" height adjustment. Rider Backrest folds down to allow easier passenger mounting. These seats are designed to match the styling of either the Heritage Softail Classic, Fat Boy, Heritage Springer or FX Softail, and include seat, rider backrest, passenger grab strap and mounting hardware.
A. HERITAGE SOFTAIL CLASSIC SEAT* WITH RIDER BACKRESTS
These seats add miles to the ride with added back support and foam density. Includes chrome spots and a new concho to match your Heritage Softail Classic bags. Seat width 15.0", passenger pillion width 11.5".
51562-00 Fits all ’00-later Softail models (except FLSTS and FXSTD). (Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00). $559.95
Shown with:
HERITAGE SOFTAIL CLASSIC BUCKET PASSENGER BACKREST PAD
The bucket backrest pad is taller and wider than the stock pad. The foam contours to the lower back to provide added comfort for those long rides. Features chrome spots and includes all mounting hardware.
52348-97 Fits FLSTC and FXSTC models with stock Sissy Bar upright and all other Softail models equipped
with Low Sissy Bar Upright.
A. HERITAGE SOFTAIL CLASSIC SEAT WITH RIDER BACKREST
B. FAT BOY SEAT* WITH RIDER BACKREST
These seats add miles to the ride with added back support and foam density. Fat Boy logo adds the finishing touch! Seat width 15.0", passenger pillion width 11.5".
51560-00 Fits all ’00-later Softail models (except FLSTS and FXSTD models). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.) Matches
Backrest Pad P/N 52347-97 |
$559.95 |
Shown with:
FAT BOY BUCKET BACKREST PAD
This bucket backrest pad is taller and wider; the foam contours to the back for added comfort on those long hauls.
52347-97 Fits FLSTF models with separate purchase of Low Sissy Bar Upright. Also fits FLSTC and FXSTC models
with stock Sissy Bar Uprights. $95.95
Press push-button in the centre of backrest pad to adjust vertically to five different heights.
BACKREST
HEIGHT
BACKREST
ANGLE
Pull tab on side of seat to adjust angle of backrest pad 30˚ forward or backward.
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the B. FAT BOY SEAT WITH RIDER BACKREST manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. HERITAGE SPRINGER SEAT WITH RIDER BACKREST
D. FX SOFTAIL SEAT WITH RIDER BACKREST
239
Softail
Seats with Backrests
C. HERITAGE SPRINGER SEAT* WITH RIDER BACKREST
These seats add miles to the ride with added back support and foam density. Seat width 15.0", passenger pillion width 11.5".
51564-00 With Black Trim.
Fits all ’00-later Softail models (except FXSTD models). (Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00). $629.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.
51132-98 Fits Softail models (except |
|
FXSTD) equipped with Low |
|
Sissy Bar Upright. |
$79.95 |
D. FX SOFTAIL SEAT* WITH RIDER BACKREST
These seats with embroidered logo add miles to the ride with added back support and foam density. Seat width 15.0", passenger pillion width 11.5".
51566-00 Fits all ’00-later Softail models |
|
(except FLSTS and FXSTD). |
|
(Does not fit with Luggage Rack |
|
P/Ns 53465-87B or 53831-00). |
|
Matches Backrest Pad P/N |
|
51132-98 |
$559.95 |
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.
51132-98 Fits Softail models (except |
|
FXSTD) equipped with Low |
|
Sissy Bar Upright. |
$79.95 |
|
|
Also available:
FX SOFTAIL BUCKET BACKREST PAD
This backrest features a contoured back support area for greater passenger comfort.
51130-98 |
Fits all low and tall medallion |
|
|
Sissy Bar uprights. (Does not |
|
|
fit Mini Sissy Bar Upright.) |
$79.95 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
240
Softail
SOFTAIL SUNDOWNER DEEP BUCKET SEAT
The ultimate combination of style and comfort, these wide double bucket seats are designed to cradle you and your passenger. Carefully shaped for maximum lower back support, the rider seating area has a recessed surface for extra comfort on long rides. The entire seat is constructed with high density foam, for long-term shape retention, and specially designed surface materials that are tested to withstand rider abrasion and harsh weather. The seat pan and hardware are made from the same high quality components as HarleyDavidson stock seats, ensuring perfect fitment and durability. Designed to match the styling of either the Heritage Softail Classic, Fat Boy, Heritage Springer or FX Softail.
A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT*
This seat has double buckets for you and your passenger. Seat includes chrome spots to match your Heritage Softail Classic. Seat width 15.0", passenger pillion width 12.0".
51572-00 Fits all ’00-later Softail models (except FLSTS and FXSTD). (Does not fit with Luggage Rack P/Ns 53465-87B or 53831-00.)
Also available:
HERITAGE SOFTAIL CLASSIC BUCKET PASSENGER BACKREST PAD
The bucket backrest pad is taller and wider than the stock pad. The foam contours to the lower back to provide added comfort for those long rides. Features chrome spots and includes all mounting hardware.
52348-97 Fits FLSTC and FXSTC models |
|
with stock Sissy Bar upright and |
|
all other Softail models equipped |
|
with Low Sissy Bar Upright. |
$95.95 |
B. FAT BOY SUNDOWNER DEEP BUCKET SEAT*
This seat has double buckets for you and your passenger. Seat includes an embroidered logo to match your Fat Boy. Seat width 15.0", passenger pillion width 12.0".
51570-00 Fits all ’00-later Softail models (except FLSTS and FXSTD). (Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00.) $264.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.
51132-98 Fits Softail models (except |
|
FXSTD) equipped with Low |
|
Sissy Bar Upright. |
$79.95 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT
B. FAT BOY SUNDOWNER DEEP BUCKET SEAT
C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT
D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT
241
Softail
Sundowner Bucket Seats
C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT
This seat has double buckets for you and your passenger. Seat includes matching concho and valance with fringe to complement the look of your FLSTS.
51574-00 |
With Black Trim. |
|
|
Fits ’00-later FLSTS models. |
|
|
(Does not fit with FXSTD.) (Does |
|
|
not fit with Luggage Rack |
|
|
P/Ns 53465-87B or 53831-00.) |
|
|
Seat width 15.0", passenger |
|
|
pillion width 12.0". |
$349.95 |
Shown with:
HERITAGE SPRINGER BUCKET PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius and ample padding. This backrest pad offers extra comfort for your passenger.
51132-98 Fits Softail models (except |
|
FXSTD) equipped with |
|
Low Sissy Bar Upright |
|
P/N 52735-85 or 53004-98. |
$79.95 |
D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT*
This FX style bucket seat offers you and your passenger Softail style and added comfort for longer rides.
51576-00 Fits all ’00-later Softail models |
|
(except FLSTS and FXSTD). |
|
Seat width 15.0", passenger |
|
pillion width 12.0". |
$239.95 |
|
|
Shown with:
FX SOFTAIL BUCKET BACKREST PAD
This backrest features a contoured back support area for greater passenger comfort.
51130-98 |
Fits all low and tall medallion |
|
|
Sissy Bar uprights. (Does not fit |
|
|
Mini Sissy Bar Upright.) |
$79.95 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
242
Softail
A. SUNDOWNER TOURING SEAT* FOR SOFTAIL DEUCE MODELS
When you’ve got the style of a Softail Deuce, you want to take on the road as much as possible. This Sundowner seat gives you added touring comfort without sacrificing the Deuce style that has heads turning. A wide and deep rider bucket allows for lower back support and comfort for the long haul and the wide passenger pillion allows your passenger to be comfortable as well. Styled to match your Deuce with an embroidered “H-D” logo. Includes all necessary mounting hardware. Seat width is 14.0"; passenger pillion width is 11.0". Combine with the Touring Passenger Backrest Pad for Softail Deuce P/N 52050-00 for additional passenger comfort.
51112-00A Fits ’00-later FXSTD models. $259.95
Shown with:
TOURING PASSENGER BACKREST
PAD FOR SOFTAIL DEUCE MODELS
Together with the Touring Seat for Softail Deuce P/N 51112-00, this backrest passenger pad provides additional support for the long haul with a wide radius backrest.
52050-00 Fits ’00-later FXSTD models |
|
equipped with Passenger Sissy |
|
Bar Upright P/N 51114-00. |
$64.95 |
B. SOFTAIL TWO-UP CUSTOM SEAT* WITH SNAKESKIN PRINT
The edgy, custom snakeskin print fits your style, the contoured shape fits you and a passenger. Includes embroidered “H-D” Flying Wheel logo. Seat width 14.0", pillion width 6.5".
52850-00 Fits all ’00-later |
|
Softail models (except |
|
FLSTS and FXSTD). |
$239.95 |
C. SOFTAIL TWO-UP CUSTOM SEAT*
A textured rider area and sculptured shape for added support set this seat apart from the crowd. Kit includes passenger grab strap. Recommended passenger backrests are P/N 52517-94 (short rail), 52965-98 (tall) and 52612-95 (low). Seat width 15.0"; Passenger Pillion width 4.5".
52850-97 Fits ’84-’99 Softail |
|
models (except FLSTS). |
$239.95 |
*NOTE: Two-up seats and seats with passenger pillions require the use of a grab strap. See your Harley-Davidson dealer for correct grab strap part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the manufacturer’s suggested retail prices. Actual retail prices may vary.
A. SUNDOWNER TOURING SEAT FOR SOFTAIL DEUCE MODELS
B. SOFTAIL TWO-UP CUSTOM SEAT WITH SNAKESKIN PRINT
C. SOFTAIL TWO-UP CUSTOM SEAT