Hanna Instruments HI 99300 User Manual

4 (1)
Hanna Instruments HI 99300 User Manual

Instruction Manual

 

DISPLAY FUNCTIONAL DESCRIPTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HI 99300 • HI 99301

Portable Instruments

for EC/TDS/°C/°F measurements

with advanced features

01/05 IST99300R1

w w w . h a n n a i n s t . c o m

HI 99300 and HI 99301 come supplied complete with HI 76306 probe, 4 alkaline batteries (1.5V AAA), instructions and rugged carrying case.

WARRANTY

All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The probes are warranted for six months.

This warranty is limited to repair or replacement free of charge. Damage due to accidents, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the problem. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization

Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection.

SPECIFICATIONS

 

 

HI 99300

HI 99301

Range

EC

0 to 3999 µS/cm

0.00 to 20.00 mS/cm

 

TDS

0 to 2000 ppm (mg/l)

0.00 to 10.00 ppt (g/l)

Temperature

0.0 to 60.0°C / 32.0 to 140.0°F

 

 

 

 

Resolution

EC

1 µS/cm

0.01 mS/cm

 

TDS

1 ppm (mg/l)

0.01 ppt (g/l)

Temperature

0.1°C / 0.1°F

Accuracy (@20°C/68°F)

±2% F.S. (EC/TDS)

 

±0.5°C / ±1°F

Typical EMC Deviation ±2% F.S. (EC/TDS) / ±0.5°C / ±1°F

Temperature

Automatic, from 0 to 60°C

Compensation

β adjustable from 0.0 to 2.4%/°C (BETA)

 

 

Calibration

Automatic, single point

EC/TDS Factor

Selectable from 0.45 to 1.00 (CONV)

Probe (included) HI 76306 with built-in temperature sensor,

 

DIN connector and 1 m cable

Environment

0 to 50°C (32 to 122°F); RH 100%

 

 

Power Supply

4 alkaline batteries, 1.5V AAA with BEPS;

 

500 hours of continuous use

 

 

Dimensions

143x80x38 mm (5.6x3.2x1.5’’)

 

 

Weight

320 g (11.3 oz.)

HI 99300 and HI 99301 are in compliance with the directives.

Loading...
+ 1 hidden pages