Haier XQB55-10H User Manual

0 (0)

Fuzzy Computerized Automatic

 

Washing Machine

User's manual

This manual is for

XQB55-10H

Special number:0030506875

Please read this manual carefully before using. Retain it for future reference.

Contents

 

Names of the parts................................................................................................

1

Safety precautions .............................................................................................

2

Installation and adjustment ...................................................................................

4

Preparation before washing .................................................................................

8

Put in the laundries ..............................................................................................

9

Usage of the detergent ........................................................................................

9

Use the operation buttons .................................................................................

.10

Close the top lid .................................................................................................

14

Finish washing ....................................................................................................

14

Disposal after washing ....................................................................................

...15

Trouble shooting Answer to questions........................................................

.....16

Packing list ......................................................................................................

...17

Description of heating function

 

1. Heating function can be selected for "Normal", "Jeans",

"Gentle"

and"Quick" programs, but it's unavailable for "Rinse"process.

 

2. If heating function is selected, for water levels "1"or "2", it begins to heat after water reaches the set level, and begins to wash when the set temperature is reached; for water levels "3"-"6", it begins to heat upon water reaching level "2", it continues water supply and gently agitates while heating to the set temperature, then it begins normal washing; for water levels above "6", the cycle is: after water reaching level "2", it begins to heat, meanwhile water supply continues until level "6", water supply stops and it continues heating to the set temperature, then it begins to wash while water supply is resuming, (the hot water temperature then is good for detergent active enzyme function and for the clothes to be in an optimum detergent concentration with a good washing effect. The subsequent washing while water supply can facilitate dirt flushing and removing), water supply stops when reaching the set level, then it continues to wash normally. For high water levels, only the water amount below level "6" can be heated to the set temperature, then it washes and supplements water to the set level

3. This washing machine provides 3 temperature selections of 20, 30and

40 , each ranging as follows

 

 

20

3

30

3

40

3

 

Names of the parts

Beforef re Usingi

 

 

 

 

Top lid A

 

Top lid B

Sop mat

Water valve

 

 

Detergent box

Cabinet handle

 

Filter cover

Drain hose

 

Control panel

Inner tub

Power line

Pulsator

Control panel film

Cabinet

back cover

base frame

Adjustable foot

 

 

fixed foot (3)

Meaning and description of the symbols

Warning sign

Contents marked with that symbol are

related to the safety

 

 

 

of the product and the personal safety of the users. Please

 

operate in strict conformity to the contents, otherwise it may

 

cause damage of the machine or injure the personal safety

 

of the user.

 

 

 

 

Forbidden sign

Contents marked with that symbol are

actions forbidden to

perform. Performing of those actions

may result in damage

 

of the machine or injure the personal safety of the user.

1

Haier XQB55-10H User Manual

Safety precautions

Beforef re Usingi

Please plug the plug on special 220V /10A receptacle.Be sure to use single-phase three pins receptacle.Ensurethe earthing prong of the power receptacle is earthed reliably.Use leakage protector if possible.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.Do not use wet hand to insert or pull out the power plug.

Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or nip it with weight.If the power cord or the power plug is bad, or the power plug becomes flexible,to avoid risk it is required to have it replaced by

the technicians of our special shop or the after-sale service department. Keep the pin of the power plug

clean,if the power plug is polluted with dust,please wipe with dry cloth carefully.

Do not put the machine at damp place like

Do not use water hotter above 50 C .

 

the bathroom. Never wash it with water. Not put wet laundries on the control panel.

In case the washing machine is installed

Do not wash water-proof laundries like

on ground with carpet, do not block the

the raincoat, bike covers etc. to avoid

ventilation hole with carpet.

abnormal vibrations in spinning.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ventilation holes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

at the bottom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

soft items

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not let the machine share one receptacle with other

electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

2

Safety precautions

Beforef re Usingi

 

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.Do not let the children climb the washing machine.

Do not decompose, repair or alter the machine by yourself.

Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.

Do not wash laundries with volatile materials (such as thinner, petrol etc.)

Petro

l

Thinner

The handicapped or children without care shall not use the machine.

Keep the machine away from direct sunlight and heat source like the heater.

3

Beforef re Usingi

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the lint filter

1.Press downward to assmble. 2.Pull upward to detach.

Install the bottom plate

After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth,blanket, etc. ).

Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure:

Front

Back

Soft items

Screw

Bottom plate

 

Adjust the installation position

The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:

Adjust the adjustable foot:

1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.

2.Fasten the nut after adjustment.

adjustable nut Loosen Fasten

adjustable foot High Low

4

Loading...
+ 14 hidden pages