Haier Solar Water Heater |
User’s Manual |
S75ENF |
S75ENL |
S85ENF |
S85ENL |
S110ENF |
S110ENL |
S125ENF |
S125ENL |
S150ENF |
S150ENL |
zPlease read this manual before usage
zRetain it for future reference
Contents |
|
|
|
|
|
Contents |
|
|
|
|
|
Features |
1 |
|
|
|
|
Technical data |
|
|
Parameters |
1 |
|
|
|
|
Safety precautions |
2 |
|
|
|
|
Before use |
|
|
Special tips |
3 |
|
|
|
|
Installation instructions |
|
|
Selection of installation location |
3 |
|
Outline and installation dimensions of the horizontal water heater |
4 |
|
Assembly the bracket |
5 |
|
Securing the bracket |
5 |
|
Installing the water tank |
5 |
|
Installing the vacuum tubes |
6 |
|
Schematic drawing of the indoor pipeline and wiring |
7 |
|
Precautions in pipeline installation |
7 |
|
Connection method of water supply pipeline in the houses where a |
|
|
solar water heat coexists with another type of water heater |
8 |
|
|
|
|
Operation instructions |
|
|
Operation method |
8 |
|
FAQ |
9 |
|
Packing list |
9 |
|
Features · Technical Data
yFeatures
1. SUS304 stainless steel water tank liner
The tank liner is made of SUS304 stainless steel. It is a food grade material featuring high anti-corrosion ability and durability.
2. Effective and energy-saving heat insulation layer
Polyurethane foam material for solar water heater is adopted to ensure high heat insulation ability and reduce heat loss to the maximum extent.
3. Al-Zn alloy coated tank shell
Al-Zn alloy coated steel plate has very strong anti-corrosion ability and excellent weatherability. It is the most preferred outdoor protective material.
4. Tower type bracket
The bracket is made of carbon steel panel by shaping and plastic spraying. It has the advantages of stable structure, beautiful appearance, anti-corrosion and so on.
yParameters
Model |
Volume of |
Size of the |
Bracket form |
Quantity of |
Aperture area |
Total water |
|
useable water |
vacuum tubes |
|
the vacuum |
|
volume (L) |
|
(L) |
|
|
tubes |
|
|
S75ENF |
75 |
φ47X1500(mm) |
Flat roof, 45º |
14 |
1.33 |
96 |
|
|
|
|
|
|
|
S85ENF |
85 |
φ47X1500(mm) |
Flat roof, 45º |
16 |
1.52 |
108 |
|
|
|
|
|
|
|
S110ENF |
110 |
φ58X1800(mm) |
Flat roof, 45º |
14 |
1.86 |
150 |
|
|
|
|
|
|
|
S125ENF |
125 |
φ58X1800(mm) |
Flat roof, 45º |
16 |
2.13 |
170 |
|
|
|
|
|
|
|
S150ENF |
150 |
φ58X1800(mm) |
Flat roof, 45º |
19 |
2.53 |
204 |
|
|
|
|
|
|
|
S75ENL |
75 |
φ47X1500(mm) |
Fastigium, 45º |
14 |
1.33 |
96 |
|
|
|
|
|
|
|
S85ENL |
85 |
φ47X1500(mm) |
Fastigium, 45º |
16 |
1.52 |
108 |
|
|
|
|
|
|
|
S110ENL |
110 |
φ58X1800(mm) |
Fastigium, 45º |
14 |
1.86 |
150 |
|
|
|
|
|
|
|
S125ENL |
125 |
φ58X1800(mm) |
Fastigium, 45º |
16 |
2.13 |
170 |
|
|
|
|
|
|
|
S150ENL |
150 |
φ58X1800(mm) |
Fastigium, 45º |
19 |
2.53 |
204 |
|
|
|
|
|
|
|
Note: Allowable error for aperture area: ≤3%, for volume: ±5%, for other sizes:±10%
Safety precautions
zSafety precautions
1.After the vacuum tubes are installed, they should not be sunned empty for long period of time as this will shorten their service life. If the water heater is not put into use after installation, please shade the tubes with proper articles.
2.Initial water filling shall be conducted in the morning or at night when there is insufficient sunlight. Filling water under strong sunshine should be avoided as this will cause explosion of the vacuum tubes.
3.If the water pressure is not high enough, normal water filling will not be realized. Please fit a booster.
4.To avoid burning, do not direct the shower nozzle towards your body while you are adjusting the water temperature.
5.The water heater is a non-pressurized water heater. The hot water flows out naturally due to the height difference between the water tank and the water usage point. The output pressure is proportional to the height difference. If the height difference is too low, it will not function normally. In this case an effluent booster should be fitted.
6.When sunshine is not sufficient, to ensure effect, you should avoid using hot water several times in one day.
7.The energy source of this water heater is solar energy. In cloudy, rainy, or snowy days, the temperature of the water coming from it may not be satisfactory due to insufficient sunshine.
8.Before winter comes, please clean the vacuum tubes and keep their surface clean to improve the heat collecting effect.
9.The vacuum tubes can withstand low temperature of -70 when they are not filled with water. In winter, on continuous cloudy days or when it is covered with snow, please keep the tank full of water and replace the low temperature water in it frequently (2 day intervals). Otherwise the vacuum tubes will break when the water in it freezes.