Haier QBJ1-200A58E, QBJ1-270A58E, QBJ1-150A58E, QBJ1-175A58E, QBJ1-230A58E User Manual

...
0 (0)

Solar Water Heater

Instruction for use

QBJ1-130A58E

QBJ1-150A58E

QBJ1-175A58E

QBJ1-200A58E

QBJ1-230A58E

QBJ1-270A58E

Please read this manual before usage

Retain it for future reference

Content

Technical data

Features

1

 

Appearance and parts

1

 

Technical parameter

1

 

 

 

 

Precautions

2

 

 

 

 

Before use

3

 

Notice

3

 

Assembly Instruction

 

 

The location

4

 

Exterior and installation dimension

4

 

Tank assembly

5

 

Frame assembly

5

 

Frame fastness

5

 

Glass tube assembly

6

 

Extraventricular plumbing instructions

7

 

Indoor plumbing instructions

7

 

Installation notice

8

 

Pipelines thermal insulation notice

9

 

The product with controller installation

 

 

and using notice

9

 

 

 

 

Using Instruction

 

 

The operation method

10

Troubles treatment

11

Packing list

11

Haier QBJ1-200A58E, QBJ1-270A58E, QBJ1-150A58E, QBJ1-175A58E, QBJ1-230A58E User Manual

Technical data

Features

1.Inner cylinder: SUS 304 stainless steel, food grade.

2.Insulation: Polyurethane foam, thickness-45 mm, good heat preservation effect.

3.Outer shell: Aluminium / zinc coated steel sheet.

4.Frame: Steady structure, shapely and durable .

Appearance and parts

Outer shell

 

 

 

 

 

 

Cover

Evacuated tubes

 

 

 

 

Silicon seal ring

 

 

 

 

 

 

 

 

 

 

 

 

Frame

Base support

 

 

 

 

Foot cushion

Technical parameter

 

 

 

 

 

Models

QBJ1-130A58E QBJ1-150A58E QBJ1-175A58E

QBJ1-200A58E QBJ1-230A58E QBJ1-270A58E

Specification of tubes

58mm

1800mm

all glass evacuated tubular collector

 

Collector frame angle

 

 

45

 

 

 

standard fixed

 

 

 

 

 

 

Number of tubes

14

16

19

22

25

30

Aperture area

1.79m2

2.07m2

2.48m2

2.90m2

3.35m2

4.03m2

Usable water

130L

150L

175L

200L

230L

270L

Total water volume

169L

195L

228L

262L

300L

354L

Electric auxiliary

Rated power: 1500W

heating

 

Water level sensor

Using the water level sensor with the height of 360 mm

Remarks:1. The warp of aperture area parameters is 3%. the warp of usable water parameters is 5%. The permitted error limit of other parameters is 10%

1

Precautions

Precautions

1.When using the water heater with electric heating, ensure that electric heating and

electric tracing belt are closed.

2.Avoiding irradiation without water after installation, it can't be used immediately, it should be sheltered.

3.When supplying water at the first time, it should be operated in the morning or evening or the condition of short of light; avoid supplying water in strong sunshine, in order to prevent vacuum tubes bombing.

4.If the water pressure isn't enough for water supply, please install an pressurize equipment.

5.When the hot water is to be used, don't place the spray head face yourself until the water temperature is suitable.

6.This product can supply the water depend on the fall of the tank and the water exit , an pressurize equipment is recommended while the water couldn't be supplied normally due to the low fall.

7.Do not supply cold water more than once in a low solar irradiance day.

8.The energy is from solar, in the days that lack of solar such as rainy or snowy day,

the temperature of the water may can't reach your demand, If there isn't electric heating ,

it may not be used normally.

9.Make sure the evacuated tubes clean, hose off the dust and dirt on the tubes and the reflector before the winter comes.

10.The evacuated tubes resist as low temperature as -70 when tubes is emptied. The tank should remain filled up during continuously cloudy or snowing days in winter, in addition every two days the cold water in the tank should be changed to prevent the water in the tank from freezing which might damage the tubes.

2

Loading...
+ 11 hidden pages