Inspired living
Refrigerator/Fr eezerCombo
User'sGuide
HRF-663ISB2*
HRF-663CJ*
Thank you very much for choosing to purchasea Haier-brand refrigerator. This User'sGuidewill help you properlyinstall andoperateyour newly acquired appliance.
For futurereference,pleasewrite downthemodelandserialnumberin thespaces providedbelow.
You canretrievethat informationfrom the productlabel attachedto the insideof therefrigerator.
Modelnumber:
Serialnumber:
Dateof purchase:
Contents |
|
Before operation |
|
Your refrigerator's features.............................................................. |
1 |
Components..................................................................................... |
2 |
Precautions ................................................................................... |
3-5 |
Preparations.................................................................................. |
6-9 |
Door removal............................................................................ |
10-11 |
Setting up the Refrigerator/Freezer Combo .................................. |
12 |
Start-up.......................................................................................... |
13 |
Digital display operation .......................................................... |
14-19 |
Notes on the refrigerator compartment |
|
Refrigerator compartment........................................................ |
20-22 |
Notes on refrigeration ................................................................... |
23 |
Tips on refrigeration ...................................................................... |
24 |
Notes on the freezer compartment |
|
Freezer compartment..................................................................... |
25 |
Notes on freezing .......................................................................... |
26 |
Ice maker and dispenser operation .......................................... |
27-28 |
Removing and installing the ice cube container............................ |
29 |
Dispenser operation....................................................................... |
30 |
Dispenser precautions.................................................................... |
31 |
Defrosting Cleaning Inoperation |
|
Defrosting ...................................................................................... |
32 |
Cleaning ........................................................................................ |
32 |
Inoperation ............................................................................... |
33-34 |
Troubleshooting & Customer Service |
|
Troubleshooting ....................................................................... |
35-36 |
Customer service ...................................................................... |
37-39 |
Before start-up, be sure to read the User's Guide.
Keep the User's Guide in a safe place.
Your refrigerator's features
Your Haier-brand Refrigerator/Freezer Combo is equipped with numerous innovative, space-saving and energy-efficient features.
(1)Ice cube maker
Automatic ice cube maker, powerful ice crusher, refrigerated water dispenser
(2)Sliding glass shelves
Sliding shelves and baskets in the refrigerator and freezer compartments make storing foods easy. With the doors fully opened, all shelves can furthermore be removed for convenient cleaning.
(3)Slim profile with spacious interior
This Refrigerator/Freezer Combo was developed according to our customers' wishes. Thanks to the latest space-saving insulating materials, the freezer and refrigerator compartments now offer even more space. The shelves and baskets are made of high-grade safety glass.
(4)The freezer compartment is equipped with a user-friendly frost-free system and manages to freeze foods quickly and evenly.
(5)Temperature adjustment before defrosting
(6)Automatic trouble indicator
(7)This Refrigerator/Freezer Combo is equipped with a condenser, and the cold air is circulated by a fan in order to achieve optimum cooling.
(8)Buzzer warning when door is open
A buzzer sounds intermittently when the door is left open permanently or is not closed properly.
(9)Intelligent mode
Optimum cooling is automatically adjusted in relation to the interior and surrounding temperatures.
1
Components |
|
Freezer |
Refrigerator |
|
compartment |
Bottle rack |
Bottle cover |
|
|
|
Light |
Ice maker |
Shelves |
|
|
Light |
|
Shelves |
Bottle rack |
|
|
Drawer cover |
|
Bottle rack |
|
Freezer drawers |
Veggie drawer cover |
|
|
|
Veggie drawer |
Note |
|
The power plug must remain accessible after setting up the appliance.
If damaged, the power cord of this appliance must be replaced by the maker, their customer service or an equally qualified person so as to prevent any hazards.
Check the appliance for damages sustained during transportation. Do not connect the appliance if it is damaged. In case of damage, contact your supplier.
Make sure that no part of the refrigerant circuit is damaged when transporting and setting up the appliance.
Should the refrigerant circuit have been damaged, keep away all sources of fire or sparks and thoroughly air the room.
Children frequently do not recognise the hazards related to handling household appliances. Therefore, children and people with impairments should only be allowed to use the refrigerator under the supervision of a qualified person. Do not let children play with the appliance.
To prevent damage to the appliance, its ventilation openings must not be covered or blocked.
Do not use any mechanical or artificial devices or any tools other than those recommended by the maker in order to accelerate the defrosting process.
Do not operate any electrical devices inside the food storage area, unless instructed to do so by the maker.
Our company continually thrives towards improving all models and versions. For that reason, we hope that you can accept our right to change their appearance, equipment or operation.
2
Precautions
This appliance requires a 220-240V/50Hz power |
A dedicated grounded outlet is required. The |
supply. |
appliance is equipped with a standard |
If the voltage is outside of the 187-242V range, |
shockproof plug, whose grounding should not be |
malfunctions and damages of the controls, |
disabled. The power plug of the appliance |
thermostat or compressor may result, unless a |
should always be accessible. |
regulator of at least 750W was installed. |
|
Do not damage the power cord. |
If the power cord is damaged or the plug cracked |
*Never pull the plug out by the cord; always |
or worn, the power cord must be replaced with a |
grab and pull the plug |
matching one, available from the maker or their |
*Do not place the power cord under the |
customer service. The power cord may only be |
appliance or walk on it. |
replaced by the maker, their customer service or |
*Be sure not to damage the power cord when |
an equally qualified person. |
moving the appliance away from the wall. |
|
In the case of a gas or other flammable leak: *Close the valve.
*Open the doors and windows.
*Do not pull out or insert the power cord of the appliance.
Pull out the power plug: *Before cleaning or repair
*When replacing a burned-out bulb
3
Precautions
Never place flammable, explosive or corrosive materials in the refrigerator.
This appliance is intended strictly for storing and freezing foods. It is not suitable for storing such things as vaccines, bacteria or chemical samples, which have demanding temperature requirements.
Do not store fuel and other flammable products near this appliance.
Do not put microwave ovens, voltage regulators or power strips on this appliance. Do not operate electrical devices and such inside the refrigerator (except if instructed to do so by the maker).
To avoid injuries, do not let children climb on or hang from the appliance door.
Once the appliance has been started up, do not touch the inside of the freezer compartment with wet hands, otherwise they may get stuck on the surface.
4
Precautions
To avoid injury, keep fingers away from the Do not pour water onto the appliance or set it up door crack when opening or closing the doors. in wet areas.
Keep children away from the appliance doors being opened and closed.
Refrigerators may only be repaired or altered by professionals. Improper repair may cause considerable damage. Please contact your dealer or our customer service should your appliance require repair or modification.
Keep bottles and tins out of the freezer. They could burst when the content freezes.
Pull out the power plug in the case of a power When disposing of the appliance, remove the
outage, repair or cleaning. |
door or door seal and shelves to prevent playing |
|
children from locking themselves in and putting |
|
their lives at risk. |
5
Preparations
Unpacking
Remove the entire packing material, including the foam underlay and pieces of tape used to hold accessories in place.
Separate and count the included accessories.
Check the items in the box against the packing list.
In case of a mismatch, please contact your supplier.
Set up the appliance in a suitable area.
(Details under “Setting up”.)
6
Preparations
Attaching the toe moulding
Open the refrigerator and freezer doors, remove the moulding
from the refrigerator compartment, and then affix it as shown in
the illustration.
7
Preparations
P l e a s e f o l l o w i n g t h e b e l o w o p e r a t i o n s w h e n y o u a r e
assembling the Door Handle:
1)Put the pothook of handle(1) into the connector(2), (as illustration 1); then pull down the handle hardly while the top of handle and top of door are in the same level(as illustration 2).
2)Put the bolt(3) into the right holes(4) with the help of screwdriver(as illustration 3).
3)When you are disassembling the door handle,please operate as the opposite way of assembling.
Handle Holder |
Handle |
Connector |
illustration 1 |
illustration 2 |
||
|
|
|
|
|
|
|
|
illustration 3
Attention:
In case of no any special need,please do not disassemble the Refrigerator door handle,In case of any need to change the handle,please get in touch with the technicians.
8
Preparations
It is recommended to clean the interior before starting up the appliance. (Details under “Cleaning”.)
Standstill
After cleaning, let the appliance stand still for at least six hours before turning it on to start it up.
9
Door removal
Removing the door
If your house door is too narrow, remove the refrigerator door and carry the refrigerator in narrow side first.
Remove the toe moulding, and then release the water coupler.
Slide the toe moulding up to remove it, and then release the water coupler while pressing on area (1) as shown in the illustration.
Remove the freezer compartment door.
1) Unscrew the hinge covers. Disconnect all |
Upper |
|
wires except for the grounding wire. |
||
(hinge) |
2) Remove the screws from the upper hinge following the direction as indicated by Arrow (1). Then remove the upper hinge following the direction as indicated by Arrow (2).
Water coupler
Hinge cover
Toe moulding
Wires
Grounding wire
Upper hinge Screw
3) Lift the freezer compartment door to remove it. Next, lift the door enough to be able fully pull out the water line.
Lift
Lift until water line can be fully
Lower removed.
hinge
10
Door removal
Remove the refrigerator compartment door.
1)Loosen the hinge cover bolts, and then remove the cover. Disconnect any wires except for the grounding wire.
2) Remove the screws from the upper hinge following the direction as indicated by Arrow (1). Then remove the upper hinge following the direction as indicated by Arrow (2).
3)Lift the refrigerator compartment door to remove it.
Wires
Upper hinge
Screw
Lower hinge
Slide the refrigerator through the
door opening.
Slide the refrigerator through the door opening as shown in the illustration.
Reinstall the door.
Bring the doors in the house, and then reinstall them by reversing the removal steps.
11
Setting up the Refrigerator/Freezer Combo
Be sure to choose a flat and level setup location. Door adjustment |
|
|
Use sturdy and fireproof supports to correct an |
If the freezer compartment door is lower than |
|
unevenness in the floor. Turning an appliance |
that of the refrigerator compartment, insert the |
|
foot clockwise raises the appliance, turning it |
wrench in the groove of the left screw and turn it |
|
anticlockwise lowers the appliance. |
in the direction of the arrow until both doors are |
|
|
the same height. |
Height difference |
|
|
|
|
|
Height |
|
|
difference |
|
Wrench |
Left screw |
|
If the refrigerator compartment door is lower |
|
Protect the setup location against direct sunlight |
than that of the freezer compartment, insert the |
|
or heat sources. |
wrench in the groove of the right screw and turn |
|
|
it in the direction of the arrow until both doors |
|
|
are the same height. |
|
|
|
Height difference |
|
Height difference |
|
|
|
Wrench |
|
|
Right bolt |
Avoid a damp setup location. Remove water |
Be sure to leave at least 10 cm of space around |
and dirt with a soft rag. |
the appliance. When installing the appliance in |
|
an enclosed area, leave at least 25 cm of space |
|
on the sides and 5 cm on the top and back. |
|
Spacing |
12
Start-up
Power connection
After connecting it to the power, the appliance is automatically set to the Intelligent and Crushed Ice modes.
This appliance has a memory function which, in the event of a power failure, automatically stores the operating mode that was last used and restores it when the power is turned on again.
Operating modes
Recommendation:
The Intelligent mode allows the appliance to achieve the best and most energy-efficient cooling effect, regardless of ambient temperature variations and without requiring you to make any settings at all.
Choose one of the following two operating modes.
(1)Intelligent mode: If there are no special requirements, it is recommended to choose the Intelligent operating mode. Press the Intelligent key once; the indicator lights up and the appliance is started automatically. (Details in the “Features” section.
(2)(Manual mode: Make manual temperature settings using the temperature adjustment keys.
Loading foods
Operate the refrigerator empty for a while. Start loading the refrigerator with foods only after it has sufficiently cooled down.
Please note that changes in the temperature settings come into effect slowly. This depends on variations of the ambient temperature, how frequently the door is opened and the amount of foods loaded.
13
Digital display operation
Control panel
G K H I L J
A |
F |
B |
E |
C |
D |
|
M N |
O P |
|
A |
---Fuzzy logic |
J----- |
Quick freeze indicator |
B--- |
Freezer temperature |
K----- |
Freezer temperature indicator |
C--- |
Lock function |
L---- |
-- Refrigerator temperature |
D--- |
Ice/Water |
indicator |
|
E--- |
Refrigerator temperature |
M----- |
Lock function indicator |
F---- |
Quick freeze |
N----- |
Water selected indicator |
G---- |
Fuzzy logic indicator |
O----- |
Cubed ice selected indicator |
H---- |
Water filter indicator |
P----- |
Crushed ice selected indicator |
I----- |
Ice maker indicator |
|
|
Fuzzy logic function G
A
If fuzzy logic is activated, the appliance will adjust inside temperature automatically according to ambient temperature. Fuzzy logic is activated and inactivated by consecutive press of button A, then Fuzzy logic indicator G will turned on and off.
14
Using the digital display
Quick Freeze |
J |
|
|
|
|
|
|
|
|
|
|
F
Quick freeze function is designed to preserve the nutritional value of food as the food will freeze completely in the shortest period possible. To use the 'Quick Freeze' function, press button F. Indicator J will illuminate to show you that the function is operational, Super freezing function will be automatically deactivated after 14 to 42 hours. It is depending on the actual quantity of food in the freezer compartment.. To switch 'Quick Freeze' off under the 'Quick Freeze' condition, press button F again indicator J will go out.
Note: the Quick freeze can not be activated if the fuzzy logic is set.
Note:Super freezing is used to freeze large quantities of fresh food and, depending on the quantity, must be switched on up to 12 hours before the food is placed in the freezer compartment.
Setting and Adjusting the Temperature
G K L
A
B
E
The appliance is preset at fuzzy logic, which can be inactivated by a press of Fuzzy logic button A, indicator G will go out.
Setting and adjusting temperature as follows: (Fuzzy logic must be inactivated.)
To adjust the refrigerator temperature under unlocked condition, press button E, the indicator L will flash. Each subsequent press of button E will adjust the temperature circled as follows: 5
-4
-3
-7
-6
-5
.
To adjust the freezer temperature under unlocked condition, press button B, the indicator K will flash. Each subsequent press of button B will adjust the temperature circled as follows:
-1 |
-- -20 -- -22 --- 15 --- 17 --- -18 . |
15 |
|
|
Using the digital display
Ice cube/water select
Crushed ice
D
P
Cool water
D
N
Ice cubes
D
O
The appliance is pre-set at crushed ice condition when the power supply is connected, indicator P illuminates. Press the button D to choose the option you want.
16
Using the digital display
Switching the icemaker on/off
G K H I L J
A |
F |
B |
E |
C |
D |
M N O P
To close the ice maker, press and hold the button F and A for 3 seconds, indicator I and N comes on, it is indicating that the ice maker has been turned off, this will shut off the water supply to the ice maker, no cubed and crushed ice, Ice/Water button can not be used for selecting between water, cubed ice and crushed ice, but it will not affect the water dispenser, cool water is still available.
If you want to turn on the ice maker, press and hold the button F and A for 3 seconds, indicator I turns off, ice maker restart to run as usual.
Note: 1) if indicator N, O and P can not be selected, please confirm if the ice maker has Been turned off according to the above information.
2) the ice maker turns on when you re-connect the electricity supply.
Switching the refrigerator On/Off
L
E
17
Using the digital display
To switch off the refrigerator, press and hold button E for 3 seconds, indicator L will disappear, but the light will continue to illuminate.
To switch the refrigerator on again, press and hold button E. indicator L will reappear and the refrigerator will begin to run as usual.
Locking and Unlocking the appliance
C
M
To lock the appliance, press and hold button C for 3 seconds under the unlock condition, indicator M will light;
To unlock the appliance, press and hold button C for 3 seconds, indicator M will go out. Note : (2)-(8) functions can be used when the appliance has been locked.
Changing the water filter
H
D
When the water filter indicator light H comes on, it is indicating that the water filter requires changing (approximately every 6 months). After finishing the change, press and hold button D for 3 seconds, indicator light H will disappear.
18
Using the digital display
Error Codes
In the event of an error occurring, the Freezer temperature indicator K and Refrigerator temperature indicator L will show one of the following codes:
E0, E1, E2,F1,F2,F3.
If this happens, please contact Customer Service to have the refrigerator repaired.
Open door warning
If any door and home bar is left for more than 30 seconds the Door Alarm function will start to remind you to close the door.
Control Function Display
30 seconds after the final press of any button, the display will be blank. The display will illuminate when the door is opened, or if you press any button.
Power-breaking Memorising Function
When the refrigerator turns off as a result of a power surge, the state of the refrigerator before the power break is memorized. Once restarted, this allows the refrigerator to operate with the programmed default values as before the power break.
Note : this function is not suit for switching ice maker off and locking the refrigerator.
19
Refrigerator compartment
Use the refrigerator compartment for short-term
food storage
The average refrigerator temperature of 0 °C-10 °C is not low enough for long-term storage of foods; it is suitable only for short-term food storage.
Adjusting the height of glass shelves
The shelves are height-adjustable to accommodate 
various item sizes. 
The shelves can be taken out for height adjustment and 
cleaning. To clean a shelf, pull it in direction 1, and 
then tilt it in direction 2 until it is in a vertical position. Finally, remove the shelf in direction 3. To remove a shelf, the appliance door must be open 90º.
Adjusting and cleaning bottle rack
Hold both sides of the bottle rack and pull it out in directions (1) and (2).
Caution:
Frozen foods (such as ice cream) should not be placed in the bottle rack but rather inside the freezer compartment to avoid that they spoil as a result of being exposed to the temperature changes from opening and closing the door.
After cleaning, re-place the bottle rack or adjust its position.
20
Refrigerator compartment
Stocking example
Foods should be grouped according to the various temperature ranges in the refrigerator compartment.
(1) Eggs, butter, cheese
(2) Tinned drinks and foods, seasonings
(3) Drinks, bottles
(4) Preserves
(5) Meats
(6) Flours, preserves, milk
(7) Processed meats, sausage
(8) Fruits, vegetables, lettuce
Removing the veggie drawer cover
First, lift the rear of the shelf in direction (1), and then pull the shelf out in direction (2). Finally, tilt the shelf in direction (3) and remove the veggie drawer once the door is open 90º.
21
Refrigerator compartment
Using the veggie drawer
The appliance is equipped with a veggie drawer suitable for keeping fruits and vegetables. The humidity level in the veggie drawer is adjustable.
Reducing or closing the opening increases the humidity inside the veggie drawer, which is desirable for keeping cucumbers, grapes, kiwi, plums, etc.
Increasing the opening reduces the humidity inside the veggie drawer, which is suitable for keeping strawberries, mandarins, beans, garlic, water melon, plums, tomatoes, etc.
Make sure that the front of the veggie drawer cover is located on the inside of the veggie drawer. Remove the veggie drawer before removing its cover.
Installation is reversed.
Replacing the bulb at the top of refrigerator
compartment
Bulb specifications: 220-240 V / 25 W
Socket: E27 (Do not use a replacement bulb of more than 25 W.)
Replacing the bulb
Unplug the power cord.
Remove the screws under the cover.
Lift the cover in direction (1), and then pull it out in direction (2).
Install the bulb.
22
Notes on refrigeration
Let warm foods and drinks cool down to room temperature before putting them in the refrigerator compartment.
Wash and dry off fresh foods before storing them.
Pack and seal foods before storing them. This prevents drying and odour dissipation.
Pack the food into portions suitable for your household. Place the foods that will be consumed the soonest towards the front so as not to leave the appliance door open longer than necessary.
Do not overstock the refrigerator.
Be sure to leave space between foods and between the foods and the interior compartment walls.
23
Tips on refrigeration
Remove the leaves of root vegetables to prevent them from absorbing the nutrients.
Thawing frozen foods inside the refrigerator helps conserve energy.
Items not requiring refrigeration: Onions, peppers, garlic, ginger.
Items not suitable for refrigeration: Gourds, melons, bananas, pineapple. Refrigeration promotes their decomposition. Do refrigerate unripe fruits.
Caution: Do not use the egg tray as an ice cube tray and never place it in the freezer or Superfrost area to prevent it from cracking.
24
Freezer compartment
Use the freezer compartment for
long-term food storage
A low temperature in the freezer compartment is necessary for long-term food storage. Do not exceed the maximum length of storage indicated on the package.
Removing and cleaning glass shelves
First, lift the rear of the shelf in direction (1), and then pull the shelf out in direction (2). Finally, tilt the shelf in direction (3) and remove it once the door is open 90º.
Interior light and replacement of bulb
Bulb specifications: 220-240 V / 40 W
Socket: E27 (Do not use a replacement bulb of more than 40 W.)
Replacing the bulb
Pull out the power plug or neutralise the fuse.
Lift the cover in direction (1), and then pull it out in direction (2).
Twist the bulb anticlockwise, and then remove it. Install a new bulb of equal specifications.
Re-install the cover.
Adjusting and cleaning bottle rack
Hold both sides of the bottle rack and pull it out in directions (1) and (2). Clean the bottle rack, and then re-place it or adjust its position.
Caution: 
Frozen foods (such as ice cream) should not be placed in the bottle rack but rather inside the freezer compartment to avoid that they spoil as a result of being exposed to the temperature changes from opening and closing the door. 
25
Notes on freezing
Let warm foods and drinks cool down to room temperature before putting them in the freezer compartment.
Pack the food into portions of up to 2.5 kg suitable for your household. As a result, the portions will freeze faster and the quality after thawing remain optimal for preparation.
Package the food before freezing it. The packages should be dry to prevent their sticking together. Use only freezer-compatible packing material; this should be strong, taste-neutral, airand watertight so as to minimize taste contamination and loss of quality.
Always write the content and freezing date on the packing, and do not exceed the recommended length of storage so as to prevent loss of quality.
Remove only the required amount to be thawed. Thawed foods must never be frozen again.
Never place more fresh food in the freezer at one time than the maximum freezing capacity.
26
Starting up the ice maker and dispenser
Preparations before starting up the ice maker and dispenser
The ice maker can be connected either directly to a water supply line if fitted with a filter (option A) or to a drinking water container if fitted with a water pump (option B).
Cut the water line to the right length to prevent it from kinking. The recommended maximum length for the water line is 12 m. The pressure drop resulting from an excessively long water line could adversely affect the ice cube maker capacity.
Keep the water line away from heat sources.
The water supply line should be installed and checked by professionals.
When calling for refrigerated water for the first time, keep pressure on the dispenser lever for one minute several times until water flows out, in order to allow the water tank inside the appliance to fill up. Be sure not to hold the dispenser lever pressed for too long, otherwise the water valve may overheat.
Option A:
Water supply line installation
The pressure of the cold water supplied to the ice maker should be within 1.5-8.5 bar.
It is recommended to use drinking water for producing ice cubes since the filter does not sterilise bacteria.
Option B:
The water pump must be connected to its own outlet and properly grounded. Removal or modification of the water pump and modification or repair of the water supply line by unauthorised persons are not permissible.
To prevent fire, do not store or use flammable products such as fuel near the water pump.
The water pump is to be used solely with room temperature water; it is not suitable for use with chemicals, fruit juice or other grainy drinks, coffee or other hot liquids.
If the water pump will not be used for en extended period of time, pull out its power plug.
Periodically check the water tank to make sure that the water level is sufficient. Do not push, shake or knock the water pump.
Place the water pump and drinking water container on a sturdy and level surface. After opening the small lid of the drinking water container, protect the opening with a dust cover. Guide one end of a hose to the bottom of the container and connect the other end to the water pump inlet (indicated by an INLET symbol). Connect one end of another hose to the water pump outlet (indicated by an OUTLET symbol) and the other end to the water valve inlet under the back of the refrigerator.
27
Ice maker and dispenser operation
Precautions
Do not connect the ice maker water line when the temperature is below 0 ºC, otherwise the water line may freeze
Open the valve and flush the water line to check the line connections for possible leaks. Close the valve again when the water is clean and clear.
The ice maker does not become operational until the temperature has reached or gone under -15 °C. (Do not consume the first batch of ice cubes.)
After setting up the appliance, be sure to check that the water supply line is properly positioned so that it will not be pinched or damaged.
The ice maker must be installed by an authorized representative.
The ice maker must be connected to a standard cold water pipe.
If the water dispenser indicator does not work, contact customer service or a qualified professional for repair.
Ice maker operation
Each cycle produces eight ice cubes. The ice cube production capacity depends on variations of the ambient temperature and how frequently the door is opened.
Caution: Let the appliance operate at least 24 hours before starting ice cube production
Do not consume the first ice cubes after starting up the appliance for the first time or following a long period of inoperation.
Arrange the ice cubes manually to make sure that the container has been filled. A few of the eight ice cubes produced in one ice maker cycle may stick together.
28
Loading...