Haier D29FA9, D34FA9, D34FA9-AK, D29FA9-AK, D29FA9-A User Manual

...
0 (0)

COLOR TV RECEIVER

OWNER'S MANUAL

Please READ this manual carefully before operating the unit, and keep it for future reference.

The Owner`s Manual for the Follow Models:

D29FA9, D29FA9-A,D29FA9-AK, D34FA9, D34FA9-A, D34FA9-AK

* For your enjoyment of this TV set, please read this manual carefully and

keep it good for future reference.

 

CONTENTS

 

Before Operation

 

Warning and cautions............................................................................................

2

Installation..........................................................................................................

3

Antenna connection...........................................................................................

3

Preparation for the remote control........................................................................

3

Position of Button and Plug-ins................................................................................

4

Front and side panel ..........................................................................................

4

Back panel.......................................................................................................

4

Function button of the remote control........................................................................

5

The screen display menu........................................................................................

6

Basic Operation

 

Switch on/off the TV set..........................................................................................

7

Watching TV programs...........................................................................................

8

Watching TV program.........................................................................................

8

Program swap and auto scan functions..................................................................

9

Tuning...............................................................................................................

10

Auto search....................................................................................................

10

Search...........................................................................................................

11

Fine tune and Program lock functions..................................................................

12

Skip unnecessary channel.................................................................................

13

Exchange programs.........................................................................................

14

Picture adjusting...............................................................................................

15

Select the picture modes and set the picture quality...........................................

15

Filter function................................................................................................

16

3A Optimize and 3DNR functions.....................................................................

17

Comb filter and LayerEn./ Color En. Functions..................................................

18

Sound adjusting................................................................................................

19

Select the sound modes and set the sound quality.............................................

19

Equalizer and mute functions..........................................................................

20

Time set up function...........................................................................................

21

Set current time and on/off time functions.........................................................

21

Remind Program Function..............................................................................

22

Set up function..................................................................................................

23

Select the menu Language and Screen saver functions.....................................

23

Select Switch on mode and HDM scan function.................................................

24

Tilt function and setting Transparency menu.....................................................

25

Setting the Lock.................................................................................................

26

Change your password...................................................................................

26

Setting the Lock.............................................................................................

27

Others functions..................................................................................................

28

Calendar,picture still and zoom functions.........................................................

28

Setting and Using Favorite programs, Setting Sleep Timer ................................

29

VGA input adjustment.......................................................................................

30

Multi-Media Player system.................................................................................

31

Multi-Media Player Preparation........................................................................

31

To operate the menu........................................................................................

33

Multi-Media player..........................................................................................

34

Copy file function............................................................................................

38

Set up functions..............................................................................................

39

Technical operation

 

External connections...........................................................................................

40

Video/Audio output connection,VGA input............................................................

40

Video/Audio input connection.............................................................................

41

Others

 

Trouble shooting.................................................................................................

42

Specifications.....................................................................................................

43

Warning and Cautions

1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

2. In order to prolong the using life of the TV set, please place it in a well ventilated location.

3. Don't place the TV set in direct sunlight or near a heat source.

4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only

be used in dry in door locations.

5.The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to

the TV set.

6.If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

Explanation on the display tube

Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleanser or abrasive cloths.

Installation

Antenna connection

General speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.

300twin-lead cable

Antenna adapter

Mixer

(additional purchase)

additional

 

 

purchase

75 coaxial cable

 

 

Antenna input

 

75 standard

Plug

coaxial type

 

(additional purchase)

AC power socket

Note

* the plug type may vary

depending on the model.

 

It is recommended that you'd better use 75coaxial cable to remove the

disturbance caused by airwave.

Don't bind antenna cable and electric wire together.

Preparation for the remote control

Battery installation

Take off the battery compartment cover. Place two AA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment.

Operation notes for the remote control unit

Under normal conditions, the life time of batteries is one year.

If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment.

Never place batteries in a fire.

Avoid dropping the remote control and/or getting it wet.

Position of Buttons and Plug-ins

Front and Side panel

Side AV terminal

USB

 

 

 

 

 

 

 

 

 

 

 

USB Terminal

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power switch

L

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cards Jack

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Infrared

receiver

TV/Video (input selector

 

 

 

 

 

 

 

 

 

Volume up/ down

Power indicator

Note:

 

 

 

 

 

 

+CH -

+ VOL - TV/AV MENU

 

The cabinet and buttons of TV is

 

 

 

 

 

 

 

 

 

 

only for reference.

 

 

 

 

Channel position up/down

 

 

 

 

 

 

 

 

 

Back panel

 

 

 

 

 

 

 

 

 

 

Antenna input

 

VGA input terminal

 

 

 

 

 

 

 

VGA IN

 

 

 

 

 

 

 

 

AVOUT

 

AV2IN AV1IN

YUV

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pb(cb)

 

 

 

 

 

 

 

 

L

L

L

L

 

 

 

 

 

 

 

 

AUDIO

 

 

Pr(cr)

 

 

 

 

 

 

 

 

R

R

R

R

 

 

 

 

 

 

 

 

AV output terminals

 

 

 

S-video

input terminal

 

 

 

 

AV2 input terminals

YUV input terminals

 

 

 

 

 

AV1 input terminals

 

 

 

 

 

 

 

 

S-video input terminal: Special video

S-VIDEO

AUDIO: L/MONO Track L/MONO ,R Track R

AV output terminals: VIDEO AUDIO

L/MONO Track

L/MONO

,R Track

R

 

AV2 input terminals

 

MONITOR

: VIDEO

AUDIO :L/MONO Track

L/MONO

,R Track

R

AV1 input terminals

 

MONITOR

:VIDEO

AUDIO :L/MONO Track

L/MONO

,R Track

R

DVD component terminals:

Interleaved signal Y Cb Cr AUDIO L/MONO Track L/MONO ,R Track R Progressive signal Y Pb Pr AUDIO L/MONO Track L/MONO ,R Track R HDTV input terminals: Y Pb Pr terminal AUDIO L/MONO Track L/MONO ,R Track R

1.When the AV2 terminal, USB terminal or the side AV terminal can not be connected at the same time.

2.When the side AV is connected, please select the AV 2 terminal.

Haier D29FA9, D34FA9, D34FA9-AK, D29FA9-AK, D29FA9-A User Manual

Function Buttons of the Remote Control

MUTE TV/AV

POWER

STILL HDM SCAN CALL/HELP

SWAP

P.STD

S.STD

CH+

VOLMENU VOL+

CH-

PICTURE

 

 

SOUND

 

FAVORITE

SHUTTLE

 

FUNCTION

ZOOM

T.SKIP

TUNE

TIME

H.LOCK

D.ALBUM

CAL./EXIT

Function buttons of the remote control

Mute button

To eliminate the sound of the programs DC standby and power button

TV and AV exchange button

A changeover between TV and other input signals like AV

I/II select button

Picture still button

Screen call/help button

HDM select button

Program scan button

Direct select button

Select a TV channel directly

Digital selection button

Changeover from one digital, two digital and three digital

Program swap button

Picture mode selection button

Sound mode selection button

Volume adjustment button

Program adjustment button

Menu call/select button

Select menu, call and exi

Picture menu call/game direction select Sound menu call/game direction select Favorite program button

Shuttle button

Function menu call/game menu select Tune menu call/game confirm

Zoom select button

Time skip button

Time menu call button

Calendar/amusement function exit button Hotel lock button

Digital album No available

The Screen Display Menu

For your convenience of operation, here lists the screen display menus of this model as your reference.

Picture menu

MENU

 

 

Picture

Picture Mode

Standard

Brightness

50

 

Sound

Contrast

50

Tune

Color

50

Hue

0

Setup

Sharpness

30

Filter

 

 

 

Timer

Advance

 

Sound menu

MENU

 

 

Picture

Sound Mode

Standard

3D MONO

Off

 

Sound

SRS Dialog

Off

Tune

Trubass

Off

Woofer

Off

 

Setup

Balance

0

Timer

Equalizer

 

 

 

Tuning menu

MENU

 

Picture

Exchange

Sound

Program edit

Tune

Search

 

Setup

Auto Search

 

Timer

Quick Search

 

Time menu

MENU

 

 

 

 

Picture

Current time

12

27

Sound

Off

Time

--

--

On

Time

--

--

 

Tune

On program

 

10

Setup

Remind time

--

--

Remind program

---

 

Timer

Sleep Time

 

Off

Setup menu

MENU

 

 

Picture

Language

English

Screen Saver

On

 

Sound

Curtain

 

Tune

Color sys.

PAL50

HDM scan

100Hz

 

Setup

Transparency

On

Timer

Tilt

0

 

 

H.lock menu

Lock Set

 

Change Password

 

New PWD

----

Confirm PWD

----

Confirm

 

Lock

Off

Channel Lock

Off

Note:

When the TV set is powered on, there might be different from what have been illustrated above. Please do some adjustment as follows to meet your needs.

1. Press the MENU button, and then press CH+/- buttons to select the menu in the main menu: PICTURE, SOUND, TUNE ,SETUP and TIMER. Off course, you may select these menus directly by pressing the PICTURE, SOUND, TIME and FUNCTION buttons on the remote control.

2.If it is not in sub-menu, press the VOL-/+ buttons to enter the sub-menu.

3.Then press the CH+/- to select the desired item, press the VOL-/+buttons to adjust the numerical value. After that, press the MENU button to return the main menu.

4.If you want exit the menu, press the MENU button repetitiously.

Switch on/ off the TV set

In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained.

Switch on/ off the TV set

Switch on/ off the TV set

1.Connect the power supply wire. Then press the power switch button, the power indicator will light, in several seconds the picture will display on the screen.

2. If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote control.

Note:

1. Press the P+/- buttons which is on the TV set to get out of the standby state when the remote control is not in use.

POWER

2. Press the POWER button on the remote control to the standby mode.

3.Press the power button on the TV set to completely power off the TV.

4.To eliminate the magnetization completely, the

TV set degausses automatically. There is the sound of PENG, it is natural.

Automatic stand by function

If no signal has been received, and after five minutes, it will stand by automatically.

Watching TV Programs

Watching TV programs

How to select the TV program

Select the desired program

1. Use the direct number selection button

Press the button from 0-9 to select a one-figure channel.

If you want to select a double figures channel, press the figure-selection button and change it into two-figure mode, then

press the number of the channel.

If you want to select a three figures channel, press the figure-selection

button and change it into three-figure mode, then press the number of the channel.

2. Use the CH+/- buttons

Press the CH+ button to select the channel of the larger number.

Press the CHbutton to select the channel of the smaller number.

CH+

VOLMENU VOL+

 

 

 

Select the desired sound

 

 

 

 

CH-

 

Press the VOL+/- buttons to adjust the volume to your need.

 

 

 

 

 

 

 

 

 

If the colour or sound of a certain channel is

 

 

 

abnormal

 

 

 

 

 

 

If the TV set you bought is

 

 

 

 

CH+

 

abnormal in colour or sound in a

 

 

 

 

 

 

certain channel, it might be

MENU

 

 

 

 

 

because the colour or sound

 

 

 

 

 

Picture

Language

English

 

 

 

system has been set improperly.

Screen Saver

On

VOL-

MENU

VOL+

Sound

You may follow the instruction

Curtain

 

 

 

 

 

Color sys.

PAL50

 

 

 

below to adjust it. Press the

Tune

 

 

 

HDM scan

60Hz

 

 

 

 

 

 

 

MENU button, then press CH+/-

Setup

Transparency

On

 

CH-

 

buttons to select function menu,

Timer

Tilt

0

 

 

 

 

 

 

 

and you can see the form . Then

 

 

 

 

 

 

press VOL+ button to enter sub-

 

 

 

 

 

 

menu.

 

 

 

If the colour of the picture is abnormal

Press the CH+/- buttons to move the indicator to "Color Sys.", and

press the VOL+/- buttons to select the proper color.

CH+

 

 

 

If the sound is abnormal

 

 

 

VOL-

MENU

VOL+

Refer the above steps to enter the

Program edit

Program edit menu. Press the CH+/-

 

 

 

 

 

 

Program NO.

2

 

 

 

buttons to move the indicator to

 

 

 

Skip

 

Off

 

 

 

"Sound Sys.", and press the VOL+/-

 

 

 

 

Lock

 

Off

 

CH-

 

buttons to select the proper sound.

 

 

 

Sound Sys.

 

DK

 

 

 

 

 

 

 

 

 

Fine tune

<144.20MHz>

Watching TV Programs (continued)

Swap function enables quick swap to the last watched program.

Program swap and auto scan functions

SWAP

SCAN

CH+

VOLMENU VOL+

Program swap

1. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).

2.If you want to return to the last watched program channel 8, you can simply press the SWAP button.

3.If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.

Auto program scan

1. Press the SCAN button to scan through all the memorized TV channels.

2.When it is the program that you desired, and press the MENU button to confirm.

CH-

Tuning

The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.

In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel.

Auto search

 

 

Auto search

 

 

 

 

1. Press the MENU button to display

 

 

 

 

the menu, then press CH+/-buttons

 

 

 

 

to select TUNE menu, press VOL+

MENU

 

 

 

button to enter.

Picture

Exchange

 

 

Sound

Program edit

 

 

 

 

 

 

Tune

Search

 

 

 

 

 

 

 

Setup

Auto Search

 

 

 

 

 

 

 

Timer

Quick Search

 

 

 

 

 

CH+

 

 

 

 

 

2. Press the CH+/- buttons to move

 

 

VOL-

MENU

the indicator to " Auto Search ".

MENU

 

VOL+

Picture

Exchange

 

 

 

 

 

 

Sound

Program edit

 

 

 

Tune

Search

 

CH-

 

Setup

Auto Search

 

 

 

 

 

 

 

 

 

 

Timer

Quick Search

 

 

 

 

3. Press the VOL+ button, and

 

 

 

 

 

"Auto Search" mode will work.

 

 

 

 

 

The TV set will search automatically

 

 

Auto Search

all available programs, after search

 

VHF-L

188.16 MHz CH NO:4

 

 

 

 

 

is finished, all available programs

 

 

 

 

 

 

 

 

 

 

will be stored in turn.

 

 

 

 

 

If you want to stop the search,

 

 

 

 

 

just press the MENU button.

 

 

 

 

 

The order of the automatic search is due to the frequency of the program, generally speaking, it is used only the first time you search the program, and after the order of the program has been made, you don't have to use this function, otherwise the order of the program will be mixed.

After searching (Continued)

Press the CH+/- buttons to check channels.

If the colour or sound is abnormal in a certain channel, it may be because that the colour or sound system has not been set properly, then, you may adjust it to proper system (Refer to page 8).

Tuning (Continued)

Search

Search

1. Press the CH+/- buttons or Direct select button to select the desired channel number.

2. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter.

 

CH+

 

 

 

 

 

. Press the CH+/- buttons to

MENU

 

VOL-

MENU

VOL+

 

Exchange

 

 

move the indicator to "Search",

Picture

 

 

and then press the VOL+ button

Sound

Program edit

 

 

 

Search

 

 

 

Tune

 

 

to enter the SEARCH menu.

 

 

CH-

Setup

Auto Search

 

 

 

 

 

 

 

Timer

Quick Search

 

 

 

 

 

 

 

 

 

 

 

4. Press the VOL+ or VOLbuttons,

 

 

 

 

the TV set will begin to search up or

 

 

 

 

down, when the TV set has searched

 

 

 

 

a program, the TV set will stop

 

Search

 

 

 

 

searching. If the program is not the

 

VHF-L 188.16 MHz CH NO:4

one you need, you can press the

 

 

 

 

 

 

 

 

 

 

 

 

button again, let the TV set continue

 

 

 

 

to search until it has searched the TV

 

 

 

 

signal you need.

 

 

 

 

 

 

 

 

Note:

CALL/HELP

Usually, five seconds after the channel has been changed, the channel number will disappear automatically. If you want to know which channel you are watching, just press the CALL/HELP button once.

 

Tuning (Continued)

 

 

 

 

 

Fine Tune and Program Lock functions

 

 

 

 

 

 

 

Fine Tune

 

 

 

 

 

 

 

If the picture and/or sound are poor, try using the

FINE

 

 

TUNE feature. Do not use this feature unless reception

 

 

is poor.

 

 

 

 

 

 

 

1. Press the CH+/- buttons or Direct

 

 

 

 

 

 

CH+

select button to select the desired

 

 

 

 

 

 

 

 

 

 

 

 

 

 

channel number. ( For example, the

 

 

 

 

 

 

 

channel 1.)

 

 

 

 

 

VOL-

MENU

VOL+

 

 

 

 

 

 

 

2. Press the MENU button to display

 

 

 

 

 

 

 

the menu, then press CH+/-buttons

 

 

 

 

 

 

CH-

to select TUNE menu, press VOL+

 

 

 

 

 

 

 

MENU

 

 

 

 

 

 

button to enter.

 

 

 

 

 

 

Picture

Exchange

 

 

 

 

3. Press the CH+/- buttons to

 

 

 

 

Sound

Program edit

 

 

 

 

 

 

 

move the indicator to " Program

Tune

Search

 

 

 

 

edit ", then press the VOL+ button

Setup

Auto Search

 

 

 

Quick Search

 

 

 

 

Timer

 

 

 

to sub-menu.

 

 

 

 

 

 

 

 

 

 

 

 

CH+

4. Press the CH+/- buttons to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

move the indicator to " Fine Tune ".

 

 

 

 

 

 

 

5. Press the VOL+ button to enter

Program edit

 

VOL-

MENU

VOL+

 

 

 

 

 

 

 

the Fine Tune Menu, and then the

Program NO.

2

 

 

 

VOLbutton to search downwards

Skip

 

 

Off

 

 

 

 

 

 

 

 

 

 

or the VOL+ button to search

Lock

 

 

Off

 

 

CH-

Sound Sys.

 

DK

 

 

 

 

 

 

 

 

upwards until it has searched the

Fine tune

<144.20MHz>

 

 

 

 

 

TV signal you need.

 

 

 

 

 

Program Lock buttons

 

 

 

If the program Lock and the program Lock of the Lock

 

 

 

Set are ON, the screen is black and LOCK will shown.

 

 

 

The program is locked.

 

 

 

 

 

 

 

 

CH+

 

 

 

 

 

 

 

 

 

 

 

 

1.Repeat the steps 1-4 of Fine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tune to select the Lock item.

 

 

 

 

 

 

 

 

Program edit

 

 

 

 

 

 

 

 

 

 

 

VOL-

MENU

VOL+

 

 

 

 

 

 

 

 

 

 

 

 

 

Program NO.

2

 

. Press the VOL+ button to turn

 

 

 

 

 

Skip

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the Lock function to "On ".

 

 

 

 

Lock

Off

 

 

CH-

 

 

 

 

 

 

 

Sound Sys.

DK

 

 

 

 

. Press the H.Lock button to

turn

 

 

 

 

 

 

Fine tune <144.20MHz>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the Program Lock function to "On "

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Refer to page 27),then the screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is black. After setting the Program Lock to On, the Lock of the

 

 

 

 

Program Edit menu will fail.

 

 

 

 

 

 

 

 

Tuning (Continued)

 

 

 

 

Skip unnecessary channel

 

 

 

 

 

 

 

Skip unnecessary channel

 

 

 

 

 

 

The Program skip feature enables you to skip/hide programs

 

 

 

that you do not wish to be displayed when using the CH+/-

 

 

 

buttons. These channels will still be displayed by directly

 

 

 

using the channel number buttons on the remote control.

 

 

 

1. Press the CH+/- buttons or Direct

 

 

 

 

 

 

 

select button to select the desired

 

 

 

 

 

 

 

channel number. ( For example, the

 

 

 

 

 

 

 

channel 1.)

 

 

 

 

 

CH+

 

 

 

 

 

 

VOL-

MENU

VOL+

 

 

 

 

 

 

 

 

2. Press the MENU button to display

 

 

 

 

 

CH-

 

the menu, then press CH+/-buttons

 

 

 

 

 

 

 

to select TUNE menu, press VOL+

MENU

 

 

 

 

 

 

button to enter.

Picture

Exchange

 

 

 

 

 

Program edit

 

 

 

3. Press the CH+/- buttons to

Sound

 

 

 

Tune

Search

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

move the indicator to " Program

Setup

Auto Search

 

 

 

edit ", then press the VOL+ button

Timer

Quick Search

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to sub-menu.

 

 

 

 

 

 

 

4. Press the CH+/- buttons to

 

 

 

 

 

 

 

move the indicator to " Skip ".

 

 

 

 

 

CH+

 

 

Program edit

 

 

 

 

 

 

 

 

 

 

 

Program NO.

2

 

 

 

. Press the VOL-/+ buttons to

Skip

 

 

Off

VOL-

MENU

VOL+

turn the Skip function to "ON ".

Lock

 

 

Off

Sound Sys.

 

DK

 

 

 

 

 

 

 

 

 

Fine tune

<144.20MHz>

 

CH-

 

. Press the MENU button to exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the menu display.

 

 

 

 

If you want to recover the skipped channel

1.Use the Channel Selection buttons to select the number of the channel to be recovered.

2.Repeat those steps just now.

3.Press the VOL+/- buttons to turn the SKIP function OFF.

Loading...
+ 31 hidden pages