COLOR TV RECEIVER
OWNER'S MANUAL
Please READ this manual carefully before operating the unit, and keep it for future reference.
The Owner`s Manual for the Follow Models:
D29FA9, D29FA9-A,D29FA9-AK, D34FA9, D34FA9-A, D34FA9-AK
* For your enjoyment of this TV set, please read this manual carefully and
keep it good for future reference. |
|
CONTENTS |
|
Before Operation |
|
Warning and cautions............................................................................................ |
2 |
Installation.......................................................................................................... |
3 |
Antenna connection........................................................................................... |
3 |
Preparation for the remote control........................................................................ |
3 |
Position of Button and Plug-ins................................................................................ |
4 |
Front and side panel .......................................................................................... |
4 |
Back panel....................................................................................................... |
4 |
Function button of the remote control........................................................................ |
5 |
The screen display menu........................................................................................ |
6 |
Basic Operation |
|
Switch on/off the TV set.......................................................................................... |
7 |
Watching TV programs........................................................................................... |
8 |
Watching TV program......................................................................................... |
8 |
Program swap and auto scan functions.................................................................. |
9 |
Tuning............................................................................................................... |
10 |
Auto search.................................................................................................... |
10 |
Search........................................................................................................... |
11 |
Fine tune and Program lock functions.................................................................. |
12 |
Skip unnecessary channel................................................................................. |
13 |
Exchange programs......................................................................................... |
14 |
Picture adjusting............................................................................................... |
15 |
Select the picture modes and set the picture quality........................................... |
15 |
Filter function................................................................................................ |
16 |
3A Optimize and 3DNR functions..................................................................... |
17 |
Comb filter and LayerEn./ Color En. Functions.................................................. |
18 |
Sound adjusting................................................................................................ |
19 |
Select the sound modes and set the sound quality............................................. |
19 |
Equalizer and mute functions.......................................................................... |
20 |
Time set up function........................................................................................... |
21 |
Set current time and on/off time functions......................................................... |
21 |
Remind Program Function.............................................................................. |
22 |
Set up function.................................................................................................. |
23 |
Select the menu Language and Screen saver functions..................................... |
23 |
Select Switch on mode and HDM scan function................................................. |
24 |
Tilt function and setting Transparency menu..................................................... |
25 |
Setting the Lock................................................................................................. |
26 |
Change your password................................................................................... |
26 |
Setting the Lock............................................................................................. |
27 |
Others functions.................................................................................................. |
28 |
Calendar,picture still and zoom functions......................................................... |
28 |
Setting and Using Favorite programs, Setting Sleep Timer ................................ |
29 |
VGA input adjustment....................................................................................... |
30 |
Multi-Media Player system................................................................................. |
31 |
Multi-Media Player Preparation........................................................................ |
31 |
To operate the menu........................................................................................ |
33 |
Multi-Media player.......................................................................................... |
34 |
Copy file function............................................................................................ |
38 |
Set up functions.............................................................................................. |
39 |
Technical operation |
|
External connections........................................................................................... |
40 |
Video/Audio output connection,VGA input............................................................ |
40 |
Video/Audio input connection............................................................................. |
41 |
Others |
|
Trouble shooting................................................................................................. |
42 |
Specifications..................................................................................................... |
43 |
Warning and Cautions
1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.
2. In order to prolong the using life of the TV set, please place it in a well ventilated location.
3. Don't place the TV set in direct sunlight or near a heat source.
4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only
be used in dry in door locations.
5.The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to
the TV set.
6.If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleanser or abrasive cloths.
Installation
Antenna connection
General speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.
300twin-lead cable
Antenna adapter |
Mixer |
|
(additional purchase) |
||
additional |
||
|
||
|
purchase |
|
75 coaxial cable |
|
|
|
Antenna input |
|
|
75 standard |
|
Plug |
coaxial type |
|
|
||
(additional purchase) |
AC power socket |
|
Note |
* the plug type may vary |
|
depending on the model. |
||
|
It is recommended that you'd better use 75coaxial cable to remove the
disturbance caused by airwave.
Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Take off the battery compartment cover. Place two AA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment.
Never place batteries in a fire.
Avoid dropping the remote control and/or getting it wet.
Position of Buttons and Plug-ins
Front and Side panel
Side AV terminal
USB |
|
|
|
|
|
|
|
|
|
|
|
USB Terminal |
|
|
|
|
|
|
|
|
|||
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power switch |
|
L |
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cards Jack |
MENU |
|
|||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
Infrared |
receiver |
TV/Video (input selector |
|
|
||||
|
|
|
|
|
|
|
Volume up/ down |
Power indicator |
|||
Note: |
|
|
|
|
|
|
+CH - |
+ VOL - TV/AV MENU |
|
||
The cabinet and buttons of TV is |
|
|
|
||||||||
|
|
|
|
|
|
|
|||||
only for reference. |
|
|
|
|
Channel position up/down |
|
|
||||
|
|
|
|
|
|
|
|||||
Back panel |
|
|
|
|
|
|
|
|
|
|
|
Antenna input |
|
VGA input terminal |
|
|
|
|
|
||||
|
|
VGA IN |
|
|
|
|
|
|
|
|
|
AVOUT |
|
AV2IN AV1IN |
YUV |
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pb(cb) |
|
|
|
|
|
|
|
|
L |
L |
L |
L |
|
|
|
|
|
|
|
|
AUDIO |
|
|
Pr(cr) |
|
|
|
|
|
|
|
|
R |
R |
R |
R |
|
|
|
|
|
|
|
|
AV output terminals |
|
|
|
S-video |
input terminal |
|
|
|
|
||
AV2 input terminals |
YUV input terminals |
|
|
|
|
|
|||||
AV1 input terminals |
|
|
|
|
|
|
|
|
|||
S-video input terminal: Special video |
S-VIDEO |
AUDIO: L/MONO Track L/MONO ,R Track R |
|||||||||
AV output terminals: VIDEO AUDIO |
L/MONO Track |
L/MONO |
,R Track |
R |
|
||||||
AV2 input terminals |
|
MONITOR |
: VIDEO |
AUDIO :L/MONO Track |
L/MONO |
,R Track |
R |
||||
AV1 input terminals |
|
MONITOR |
:VIDEO |
AUDIO :L/MONO Track |
L/MONO |
,R Track |
R |
DVD component terminals:
Interleaved signal Y Cb Cr AUDIO L/MONO Track L/MONO ,R Track R Progressive signal Y Pb Pr AUDIO L/MONO Track L/MONO ,R Track R HDTV input terminals: Y Pb Pr terminal AUDIO L/MONO Track L/MONO ,R Track R
1.When the AV2 terminal, USB terminal or the side AV terminal can not be connected at the same time.
2.When the side AV is connected, please select the AV 2 terminal.
Function Buttons of the Remote Control
MUTE TV/AV |
POWER |
STILL HDM SCAN CALL/HELP
SWAP
P.STD |
S.STD |
CH+
VOLMENU VOL+
CH-
PICTURE |
|
|
SOUND |
|
FAVORITE |
SHUTTLE |
|
FUNCTION |
ZOOM |
T.SKIP |
TUNE |
TIME |
H.LOCK |
D.ALBUM |
CAL./EXIT |
Function buttons of the remote control
Mute button
To eliminate the sound of the programs DC standby and power button
TV and AV exchange button
A changeover between TV and other input signals like AV
I/II select button
Picture still button
Screen call/help button
HDM select button
Program scan button
Direct select button
Select a TV channel directly
Digital selection button
Changeover from one digital, two digital and three digital
Program swap button
Picture mode selection button
Sound mode selection button
Volume adjustment button
Program adjustment button
Menu call/select button
Select menu, call and exi
Picture menu call/game direction select Sound menu call/game direction select Favorite program button
Shuttle button
Function menu call/game menu select Tune menu call/game confirm
Zoom select button
Time skip button
Time menu call button
Calendar/amusement function exit button Hotel lock button
Digital album No available
The Screen Display Menu
For your convenience of operation, here lists the screen display menus of this model as your reference.
Picture menu
MENU |
|
|
|
Picture |
Picture Mode |
Standard |
|
Brightness |
50 |
||
|
|||
Sound |
Contrast |
50 |
|
Tune |
Color |
50 |
|
Hue |
0 |
||
Setup |
Sharpness |
30 |
|
Filter |
|
||
|
|
||
Timer |
Advance |
|
Sound menu
MENU |
|
|
|
Picture |
Sound Mode |
Standard |
|
3D MONO |
Off |
||
|
|||
Sound |
SRS Dialog |
Off |
|
Tune |
Trubass |
Off |
|
Woofer |
Off |
||
|
|||
Setup |
Balance |
0 |
|
Timer |
Equalizer |
|
|
|
|
Tuning menu
MENU |
|
Picture |
Exchange |
Sound |
Program edit |
Tune |
Search |
|
|
Setup |
Auto Search |
|
|
Timer |
Quick Search |
|
Time menu
MENU |
|
|
|
|
|
Picture |
Current time |
12 |
27 |
||
Sound |
Off |
Time |
-- |
-- |
|
On |
Time |
-- |
-- |
||
|
|||||
Tune |
On program |
|
10 |
||
Setup |
Remind time |
-- |
-- |
||
Remind program |
--- |
||||
|
|||||
Timer |
Sleep Time |
|
Off |
Setup menu
MENU |
|
|
|
Picture |
Language |
English |
|
Screen Saver |
On |
||
|
|||
Sound |
Curtain |
|
|
Tune |
Color sys. |
PAL50 |
|
HDM scan |
100Hz |
||
|
|||
Setup |
Transparency |
On |
|
Timer |
Tilt |
0 |
|
|
|
H.lock menu
Lock Set |
|
Change Password |
|
New PWD |
---- |
Confirm PWD |
---- |
Confirm |
|
Lock |
Off |
Channel Lock |
Off |
Note:
When the TV set is powered on, there might be different from what have been illustrated above. Please do some adjustment as follows to meet your needs.
1. Press the MENU button, and then press CH+/- buttons to select the menu in the main menu: PICTURE, SOUND, TUNE ,SETUP and TIMER. Off course, you may select these menus directly by pressing the PICTURE, SOUND, TIME and FUNCTION buttons on the remote control.
2.If it is not in sub-menu, press the VOL-/+ buttons to enter the sub-menu.
3.Then press the CH+/- to select the desired item, press the VOL-/+buttons to adjust the numerical value. After that, press the MENU button to return the main menu.
4.If you want exit the menu, press the MENU button repetitiously.
Switch on/ off the TV set
In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained.
Switch on/ off the TV set
Switch on/ off the TV set
1.Connect the power supply wire. Then press the power switch button, the power indicator will light, in several seconds the picture will display on the screen.
2. If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote control.
Note:
1. Press the P+/- buttons which is on the TV set to get out of the standby state when the remote control is not in use.
POWER
2. Press the POWER button on the remote control to the standby mode.
3.Press the power button on the TV set to completely power off the TV.
4.To eliminate the magnetization completely, the
TV set degausses automatically. There is the sound of PENG, it is natural.
Automatic stand by function
If no signal has been received, and after five minutes, it will stand by automatically.
Watching TV Programs
Watching TV programs
How to select the TV program
Select the desired program
1. Use the direct number selection button
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number of the channel.
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CHbutton to select the channel of the smaller number.
CH+
VOLMENU VOL+
|
|
|
Select the desired sound |
|
|
|
|
|
CH- |
|
Press the VOL+/- buttons to adjust the volume to your need. |
||||
|
|
|
|
|
|
||
|
|
|
If the colour or sound of a certain channel is |
||||
|
|
|
abnormal |
|
|
|
|
|
|
|
If the TV set you bought is |
|
|
|
|
|
CH+ |
|
abnormal in colour or sound in a |
|
|
|
|
|
|
|
certain channel, it might be |
MENU |
|
|
|
|
|
|
because the colour or sound |
|
|
||
|
|
|
Picture |
Language |
English |
||
|
|
|
system has been set improperly. |
Screen Saver |
On |
||
VOL- |
MENU |
VOL+ |
Sound |
||||
You may follow the instruction |
Curtain |
|
|||||
|
|
|
|
Color sys. |
PAL50 |
||
|
|
|
below to adjust it. Press the |
Tune |
|||
|
|
|
HDM scan |
60Hz |
|||
|
|
|
|
||||
|
|
|
MENU button, then press CH+/- |
Setup |
Transparency |
On |
|
|
CH- |
|
buttons to select function menu, |
Timer |
Tilt |
0 |
|
|
|
|
|
||||
|
|
|
and you can see the form . Then |
|
|
|
|
|
|
|
press VOL+ button to enter sub- |
|
|
|
|
|
|
|
menu. |
|
|
|
If the colour of the picture is abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper color.
CH+
|
|
|
If the sound is abnormal |
|
|
|
VOL- |
MENU |
VOL+ |
Refer the above steps to enter the |
Program edit |
||
Program edit menu. Press the CH+/- |
|
|
|
|||
|
|
|
Program NO. |
2 |
||
|
|
|
buttons to move the indicator to |
|||
|
|
|
Skip |
|
Off |
|
|
|
|
"Sound Sys.", and press the VOL+/- |
|
||
|
|
|
Lock |
|
Off |
|
|
CH- |
|
buttons to select the proper sound. |
|
||
|
|
Sound Sys. |
|
DK |
||
|
|
|
|
|
||
|
|
|
|
Fine tune |
<144.20MHz> |
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Program swap and auto scan functions
SWAP
SCAN
CH+
VOLMENU VOL+
Program swap
1. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
2.If you want to return to the last watched program channel 8, you can simply press the SWAP button.
3.If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.
Auto program scan
1. Press the SCAN button to scan through all the memorized TV channels.
2.When it is the program that you desired, and press the MENU button to confirm.
CH-
Tuning
The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.
In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel.
Auto search
|
|
Auto search |
|
|
|
|
1. Press the MENU button to display |
|
|
|
|
the menu, then press CH+/-buttons |
|
|
|
|
to select TUNE menu, press VOL+ |
MENU |
|
|
|
button to enter. |
Picture |
Exchange |
|
|
Sound |
Program edit |
|
|
|
|
||
|
|
|
Tune |
Search |
|
|
|
|
|
|
|
|
Setup |
Auto Search |
|
|
|
|
|
|
|
|
Timer |
Quick Search |
|
|
|
|
|
|
CH+ |
|
|
|
|
|
2. Press the CH+/- buttons to move |
|
|
VOL- |
MENU |
the indicator to " Auto Search ". |
MENU |
|
VOL+ |
Picture |
Exchange |
||
|
|
|
||
|
|
|
Sound |
Program edit |
|
|
|
Tune |
Search |
|
CH- |
|
Setup |
Auto Search |
|
|
|
||
|
|
|
|
|
|
|
|
Timer |
Quick Search |
|
|
|
|
3. Press the VOL+ button, and |
|
|
|
|
|
"Auto Search" mode will work. |
|
|
|
|
|
The TV set will search automatically |
|
|
Auto Search |
||
all available programs, after search |
|
VHF-L |
188.16 MHz CH NO:4 |
||
|
|
|
|
|
|
is finished, all available programs |
|
|
|
|
|
|
|
|
|
|
|
will be stored in turn. |
|
|
|
|
|
If you want to stop the search, |
|
|
|
|
|
just press the MENU button. |
|
|
|
|
|
The order of the automatic search is due to the frequency of the program, generally speaking, it is used only the first time you search the program, and after the order of the program has been made, you don't have to use this function, otherwise the order of the program will be mixed.
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be because that the colour or sound system has not been set properly, then, you may adjust it to proper system (Refer to page 8).
Tuning (Continued)
Search
Search
1. Press the CH+/- buttons or Direct select button to select the desired channel number.
2. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter.
|
CH+ |
|
|
|
|
|
. Press the CH+/- buttons to |
MENU |
|
VOL- |
MENU |
VOL+ |
|
Exchange |
|
|
move the indicator to "Search", |
Picture |
|
|
|
and then press the VOL+ button |
Sound |
Program edit |
|
|
|
Search |
|
|
|
|
Tune |
|
|
|
to enter the SEARCH menu. |
|
|
|
CH- |
Setup |
Auto Search |
|
|
|
|
|
|
|
|
|
Timer |
Quick Search |
|
|
|
|
|
|
|
|
|
|
|
4. Press the VOL+ or VOLbuttons, |
|
|
|
|
||
the TV set will begin to search up or |
|
|
|
|
||
down, when the TV set has searched |
|
|
|
|
||
a program, the TV set will stop |
|
Search |
||||
|
|
|
|
|||
searching. If the program is not the |
|
VHF-L 188.16 MHz CH NO:4 |
||||
one you need, you can press the |
|
|
|
|
||
|
|
|
|
|||
|
|
|
|
|||
button again, let the TV set continue |
|
|
|
|
||
to search until it has searched the TV |
|
|
|
|
||
signal you need. |
|
|
|
|
||
|
|
|
|
Note:
CALL/HELP
Usually, five seconds after the channel has been changed, the channel number will disappear automatically. If you want to know which channel you are watching, just press the CALL/HELP button once.
|
Tuning (Continued) |
|
|
|
|
|
|
Fine Tune and Program Lock functions |
|
|
|
|
|
||
|
|
Fine Tune |
|
|
|
|
|
|
|
If the picture and/or sound are poor, try using the |
FINE |
||||
|
|
TUNE feature. Do not use this feature unless reception |
|||||
|
|
is poor. |
|
|
|
|
|
|
|
1. Press the CH+/- buttons or Direct |
|
|
|
|
|
|
CH+ |
select button to select the desired |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
channel number. ( For example, the |
|
|
|
|
|
|
|
channel 1.) |
|
|
|
|
|
VOL- |
MENU |
VOL+ |
|
|
|
|
|
|
|
2. Press the MENU button to display |
|
|
|
|
|
|
|
the menu, then press CH+/-buttons |
|
|
|
|
|
|
CH- |
to select TUNE menu, press VOL+ |
|
|
|
|
|
|
|
MENU |
|
|
|
|
|
|
|
button to enter. |
|
|
|
|
|
|
|
Picture |
Exchange |
|
|
||
|
|
3. Press the CH+/- buttons to |
|
|
|||
|
|
Sound |
Program edit |
|
|||
|
|
|
|
||||
|
|
move the indicator to " Program |
Tune |
Search |
|
|
|
|
|
edit ", then press the VOL+ button |
Setup |
Auto Search |
|
||
|
|
Quick Search |
|
||||
|
|
|
Timer |
|
|||
|
|
to sub-menu. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH+ |
4. Press the CH+/- buttons to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
move the indicator to " Fine Tune ". |
|
|
|
|
|
|
|
5. Press the VOL+ button to enter |
Program edit |
|
|||
VOL- |
MENU |
VOL+ |
|
|
|
|
|
|
|
the Fine Tune Menu, and then the |
Program NO. |
2 |
|
||
|
|
VOLbutton to search downwards |
Skip |
|
|
Off |
|
|
|
|
|
|
|
|
|
|
|
or the VOL+ button to search |
Lock |
|
|
Off |
|
|
CH- |
Sound Sys. |
|
DK |
|
||
|
|
|
|
|
|||
|
|
upwards until it has searched the |
Fine tune |
<144.20MHz> |
|||
|
|
|
|||||
|
|
TV signal you need. |
|
|
|
|
|
Program Lock buttons
|
|
|
If the program Lock and the program Lock of the Lock |
|||||||||
|
|
|
Set are ON, the screen is black and LOCK will shown. |
|||||||||
|
|
|
The program is locked. |
|
|
|
|
|
|
|
||
|
CH+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Repeat the steps 1-4 of Fine |
|
|
|
|
||||||
|
|
|
|
|
|
|
||||||
|
|
|
Tune to select the Lock item. |
|
|
|
|
|||||
|
|
|
|
Program edit |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|||
VOL- |
MENU |
VOL+ |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
Program NO. |
2 |
|
|||||
. Press the VOL+ button to turn |
||||||||||||
|
|
|
|
|
Skip |
Off |
|
|||||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
the Lock function to "On ". |
|
|
|
|
Lock |
Off |
|
||
|
CH- |
|
|
|
|
|
|
|
Sound Sys. |
DK |
|
|
|
|
|
. Press the H.Lock button to |
turn |
|
|
||||||
|
|
|
|
Fine tune <144.20MHz> |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
the Program Lock function to "On " |
|
|
|
|
||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
(Refer to page 27),then the screen |
|
|
|
|
||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
is black. After setting the Program Lock to On, the Lock of the |
||||||||
|
|
|
|
Program Edit menu will fail. |
|
|
|
|
|
|
|
|
Tuning (Continued) |
|
|
|
|
||
Skip unnecessary channel |
|
|
|
|
|||
|
|
|
Skip unnecessary channel |
|
|
|
|
|
|
|
The Program skip feature enables you to skip/hide programs |
||||
|
|
|
that you do not wish to be displayed when using the CH+/- |
||||
|
|
|
buttons. These channels will still be displayed by directly |
||||
|
|
|
using the channel number buttons on the remote control. |
||||
|
|
|
1. Press the CH+/- buttons or Direct |
|
|
|
|
|
|
|
select button to select the desired |
|
|
|
|
|
|
|
channel number. ( For example, the |
|
|
|
|
|
|
|
channel 1.) |
|
|
|
|
|
CH+ |
|
|
|
|
|
|
VOL- |
MENU |
VOL+ |
|
|
|
|
|
|
|
|
2. Press the MENU button to display |
|
|
|
|
|
CH- |
|
the menu, then press CH+/-buttons |
|
|
|
|
|
|
|
to select TUNE menu, press VOL+ |
MENU |
|
|
|
|
|
|
button to enter. |
Picture |
Exchange |
|
|
|
|
|
|
Program edit |
|||
|
|
|
3. Press the CH+/- buttons to |
Sound |
|||
|
|
|
Tune |
Search |
|
||
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
move the indicator to " Program |
Setup |
Auto Search |
||
|
|
|
edit ", then press the VOL+ button |
Timer |
Quick Search |
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
to sub-menu. |
|
|
|
|
|
|
|
4. Press the CH+/- buttons to |
|
|
|
|
|
|
|
move the indicator to " Skip ". |
|
|
|
|
|
CH+ |
|
|
Program edit |
|||
|
|
|
|
|
|
|
|
|
|
|
|
Program NO. |
2 |
||
|
|
|
. Press the VOL-/+ buttons to |
Skip |
|
|
Off |
VOL- |
MENU |
VOL+ |
turn the Skip function to "ON ". |
Lock |
|
|
Off |
Sound Sys. |
|
DK |
|||||
|
|
|
|
|
|||
|
|
|
|
Fine tune |
<144.20MHz> |
||
|
CH- |
|
. Press the MENU button to exit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
the menu display. |
|
|
|
|
If you want to recover the skipped channel
1.Use the Channel Selection buttons to select the number of the channel to be recovered.
2.Repeat those steps just now.
3.Press the VOL+/- buttons to turn the SKIP function OFF.