Graco 25C536, 25C537, 25C538, 25C541, 25C540 Instructions - Parts Manual

Instructions/Parts

Stainless

Stainless Stainless
Agitators

Agitators Agitators

Radial

Radial Radial
coatings.

coatings. coatings.

100psig(0.7MPa,7bar)pressure
tankMaximumWorkingPressure,70
psig(0.5MPa,5bar)agitatorMaximum
RecommendedOperatingPressure
Seepage3formodelpartnumbersand
approvalsinformation.

piston

piston piston

For

For For

Important

Important Important

Readallwarningsandinstructionsinthismanualbeforeusingthe
equipment.Savetheseinstructions.

Steel,

Steel, Steel,
with

with with

air

driven

air air

driven driven

professional

professional professional

Safety

Safety Safety

Pressure

Pressure Pressure

agitators

agitators agitators

use

use use

Instructions

Instructions Instructions

Heavy

Heavy Heavy

Duty,

Duty, Duty,

Tank

Tank Tank

Air

Air Air

Driven

- --Driven Driven

3A4797B

EN

for

maintaining

for for

maintaining maintaining

only.

only. only.

suspension

suspension suspension

and

even

and and

mixing

even even

- --mixing mixing

industrial

in ininindustrial industrial

paints

paints paints

and

and and

PROVENQUALITY.LEADINGTECHNOLOGY.

Contents

Contents Contents

Models...............................................................2

Warnings...........................................................3

Installation..........................................................5

TypicalSystem............................................5

AirRegulatorandMuf󰘱ers............................6

Agitator.......................................................7

Grounding...................................................9

ConnectingHoses........................................9

AirLineFilter...............................................9

Operation...........................................................10

PreparingtheFluid.......................................10

FillingtheTank............................................10

OperatingtheAgitator..................................10

PressureReliefProcedure............................11

SafetyReliefValve.......................................11

Maintenance......................................................12

GreasingtheAirMotor.................................12

AirMotorMuf󰘱er..........................................12

CleaningtheShaft.......................................12

CleaningtheTank........................................12

Service..............................................................13

RemovingtheAirMotor................................13

InstallingtheAirMotor..................................13

ServicingtheAgitatorShaftand

Couplings.......................................14

InstallingtheMotorConversionKit................14

Parts..................................................................15

AllModels...................................................15

TankPartsforModels25C536,25C537,

25C538..........................................17

Accessories........................................................19

Strainer240418...........................................19

Buna-NAirSupplyHose...............................19

Low-PressureRegulatorConversionKit

235041..........................................19

High-PressureRegulatorConversionKit

236680..........................................19

AirRegulatorandFilter202660.....................19

GunAirRegulatorKit235042.......................19

PTFECoatedGasket117574.......................19

NylonFluidSupplyHose..............................19

BottomOutletKit236677..............................19

HeavyDutyAgitator.....................................19

C-clampReplacementKit111381.................19

AntistaticPolyethyleneTankLiners...............19

StainlessSteelAgitatorPaddle

186517..........................................19

Dimensions........................................................20

AirConsumption.................................................21

Notes................................................................22

TechnicalSpeci󰘰cations......................................23

CaliforniaProposition65...............................23

Models

Models Models

Agitators

Agitators Agitators

Agitators

Agitators Agitators

Motor

Motor Motor

with

Pressure

with with

Pressure Pressure

Part

No.

Part Part

No. No.

25C536

25C537

25C538

without

without without

Part

No.

Part Part

No. No.

25C539

25C540

25C541

Conversion

Conversion Conversion

HeavyDutyAgitator
withPressureTank,5Gallon

HeavyDutyAgitator
withPressureTank,10Gallon

HeavyDutyAgitator
withPressureTank,15Gallon

HeavyDutyAgitator
(tobeusedwitha5gallontank)

HeavyDutyAgitator
(tobeusedwitha10gallontank)

HeavyDutyAgitator
(tobeusedwitha15gallontank)

Tank

Tank Tank

Description

Description Description

ASME

ASME ASME

Pressure

Pressure Pressure

Kit

Kit Kit

Tank

Tank Tank

Description

Description Description

Approvals

Approvals Approvals

1/2

G

II IIII1/2 1/2

G G

Ex

IIB

T4

Ex Ex

2575

2575 2575

2575

2575 2575

h hhIIB IIB

IECEx

IECEx IECEx
ITS17ATEX1001809

ITS17ATEX1001809 ITS17ATEX1001809
0 00°C CC≤Tamb Tamb

Approvals

Approvals Approvals

Ex

Ex Ex

h hhIIB IIB

IECEx

IECEx IECEx
ITS17ATEX1001809

ITS17ATEX1001809 ITS17ATEX1001809
0 00°C CC≤Tamb Tamb

Ga/Gb

T4 T4

Ga/Gb Ga/Gb

ETL

17.0019

ETL ETL

17.0019 17.0019

Tamb

IIB

50

C

≤50 50

°C C

1/2

G

II IIII1/2 1/2

G G

T4

Ga/Gb

T4 T4

Ga/Gb Ga/Gb

ETL

17.0019

ETL ETL

17.0019 17.0019

Tamb

50

C

≤50 50

°C C

Part

No.

Part Part

No. No.

19A844Toconvertaheavydutyagitator

motorassemblywitharadialpiston
airmotorassembly.

2

Description

Description Description

Approvals

Approvals Approvals

Ex

IIB

T4

II IIII2 22G GGEx Ex

h hhIIB IIB

Gb

T4 T4

Gb Gb

3A4797B

Warnings

Warnings Warnings

Thefollowingwarningsareforthesetup,use,grounding,maintenance,andrepairofthisequipment.Theexclamation
pointsymbolalertsyoutoageneralwarningandthehazardsymbolsrefertoprocedure-speci󰘰crisks.Whenthese
symbolsappearinthebodyofthismanual,referbacktotheseWarnings.Product-speci󰘰chazardsymbolsand
warningsnotcoveredinthissectionmayappearthroughoutthebodyofthismanualwhereapplicable.

WARNING

WARNING WARNING

FIRE

AND

FIRE FIRE

Flammablefumes,suchassolventandpaintfumes,inwork work
solvent󰘱owingthroughtheequipmentcancausestaticsparking.Tohelpprevent󰘰reandexplosion:

•Useequipmentonlyinwellventilatedarea.

•Eliminateallignitionsources;suchaspilotlights,cigarettes,portableelectriclamps,andplastic
dropcloths(potentialstaticarc).

•Groundallequipmentintheworkarea.SeeGrounding Grounding

•Neversprayor󰘱ushsolventathighpressure.

•Keepworkareafreeofdebris,includingsolvent,ragsandgasoline.

•Donotplugorunplugpowercords,orturnpowerorlightswitchesonoroffwhen󰘱ammable
fumesarepresent.

•Useonlygroundedhoses.

•Holdgun󰘰rmlytosideofgroundedpailwhentriggeringintopail.Donotusepaillinersunlessthey
areantistaticorconductive.

Stop

•Stop Stop
youidentifyandcorrecttheproblem.

•Keepaworking󰘰reextinguisherintheworkarea.

MOVING

MOVING MOVING

EXPLOSION

AND AND

EXPLOSION EXPLOSION

operation

operation operation

PARTS

PARTS PARTS

immediately

immediately immediately

HAZARD

HAZARD HAZARD

HAZARD

HAZARD HAZARD

work

area

area area

canigniteorexplode.Paintor

Grounding

ifstaticsparkingoccursoryoufeelashock,Donotuseequipmentuntil

instructions.

Warnings

Movingpartscanpinch,cut,oramputate󰘰ngersandotherbodyparts.

•Keepclearofmovingparts.

•Donotoperateequipmentwithprotectiveguardsorcoversremoved.

•Donotwearlooseclothing,jewelry,orlonghairwhileoperatingequipment.

•Equipmentcanstartwithoutwarning.Beforechecking,moving,orservicingequipment,followthe
Pressure

Pressure Pressure

PRESSURIZED

PRESSURIZED PRESSURIZED

Fluidfromtheequipment,leaks,orrupturedcomponentscansplashintheeyesoronskinand
causeseriousinjury.

•FollowthePressure Pressure
checking,orservicingequipment.

•Tightenall󰘱uidconnectionsbeforeoperatingtheequipment.

•Checkhoses,tubes,andcouplingsdaily.Replacewornordamagedpartsimmediately.

Relief

Procedure

Relief Relief

Procedure Procedure

EQUIPMENT

EQUIPMENT EQUIPMENT

Pressure

anddisconnectallpowersources.

HAZARD

HAZARD HAZARD

Relief

Procedure

Relief Relief

Procedure Procedure

whenyoustopspraying/dispensingandbeforecleaning,

3A4797B3

Warnings

WARNING

WARNING WARNING

EQUIPMENT

EQUIPMENT EQUIPMENT
Misusecancausedeathorseriousinjury.

•Donotoperatetheunitwhenfatiguedorunderthein󰘱uenceofdrugsoralcohol.

•Donotexceedthemaximumworkingpressureortemperatureratingofthelowestratedsystem
component.SeeTechnical Technical

•Use󰘱uidsandsolventsthatarecompatiblewithequipmentwettedparts.SeeTechnical Technical
Speci󰘰cations

Speci󰘰cations Speci󰘰cations
completeinformationaboutyourmaterial,requestSDSfromdistributororretailer.

•Donotleavetheworkareawhileequipmentisenergizedorunderpressure.

•TurnoffallequipmentandfollowthePressure Pressure

•Checkequipmentdaily.Repairorreplacewornordamagedpartsimmediatelywithgenuine
manufacturer’sreplacementpartsonly.

•Donotalterormodifyequipment.Alterationsormodi󰘰cationsmayvoidagencyapprovalsand
createsafetyhazards.

•Makesureallequipmentisratedandapprovedfortheenvironmentinwhichyouareusingit.

•Useequipmentonlyforitsintendedpurpose.Callyourdistributorforinformation.

•Routehosesandcablesawayfromtraf󰘰careas,sharpedges,movingparts,andhotsurfaces.

•Donotkinkoroverbendhosesorusehosestopullequipment.

•Keepchildrenandanimalsawayfromworkarea.

•Complywithallapplicablesafetyregulations.

TOXIC

TOXIC TOXIC

MISUSE

MISUSE MISUSE

FLUID

FLUID FLUID

OR

OR OR

HAZARD

HAZARD HAZARD

Technical

inallequipmentmanuals.Read󰘱uidandsolventmanufacturer’swarnings.For

FUMES

FUMES FUMES

Speci󰘰cations

Speci󰘰cations Speci󰘰cations

HAZARD

HAZARD HAZARD

Pressure

inallequipmentmanuals.

Relief

Relief Relief

Technical

Procedure

Procedure Procedure

whenequipmentisnotinuse.

Toxic󰘱uidsorfumescancauseseriousinjuryordeathifsplashedintheeyesoronskin,inhaled,or
swallowed.

•ReadSafetyDataSheet(SDS)toknowthespeci󰘰chazardsofthe󰘱uidsyouareusing.

•Storehazardous󰘱uidinapprovedcontainers,anddisposeofitaccordingtoapplicableguidelines.

BURN

BURN BURN

Equipmentsurfacesand󰘱uidthatisheatedcanbecomeveryhotduringoperation.Toavoidsevere
burns:

•Donottouchhot󰘱uidorequipment.

PERSONAL

PERSONAL PERSONAL
Wearappropriateprotectiveequipmentwhenintheworkareatohelppreventseriousinjury,including
eyeinjury,hearingloss,inhalationoftoxicfumes,andburns.Protectiveequipmentincludesbut
isnotlimitedto:

•Protectiveeyewear,andhearingprotection.

•Respirators,protectiveclothing,andglovesasrecommendedbythe󰘱uidandsolventmanufacturer.

HAZARD

HAZARD HAZARD

PROTECTIVE

PROTECTIVE PROTECTIVE

EQUIPMENT

EQUIPMENT EQUIPMENT

4

3A4797B

Installation

Installation

Installation Installation

Typical

Typical Typical

Besurethatallaccessoriesareproperlyratedtowithstandthepressuresinthesystem.

NOTE:Throughoutthemanual,referencenumbersandlettersinparenthesesrefertonumbersandlettersin󰘰gures
andthepartsdrawings.

System

System System

Reference

Reference Reference

SH

SVAirShutoffvalve

GCWGroundclampandwire

AHAtomizingairhoseFVFluidoutletballvalve

FHFluidhoseTRTankairregulator

AG

AF

TTankAAAgitatorairinlethose

3A4797B5

Sold

Separately

Sold Sold

Separately Separately

AirsupplyhoseTHTankAirInletHose

AirspraygunAMAirmotor

Airinlet󰘰lter

Description

- --Description Description

Reference

Reference Reference

RV

BVAirinletballvalve

ARMotorairregulator

Included

Included Included

Safetyreliefvalve(farside)

Description

- --Description Description

Installation

Air

Regulator

Air Air

Regulator Regulator

Theairmotoriscapableofoperatinginaclockwise
orcounterclockwisedirection,dependingonwhere
theairregulatorismounted.Clockwisedirectionis
preferredforthisbladeorientation

•Whentheairregulatorisinstalledinoneofthe
twolowerportsonthemotor,aclockwiserotation
results,asviewedfromthetopofthemotor.

•Wheninstalledoneithersideinoneofthetwo
upperports,acounterclockwiserotationresults.

•Theportoppositetheregulatormustbeplugged
forthemotortooperate.

Theairregulator,muf󰘱ers,airgauge,nipple
connector,andswivelconnectorarenotfactory
installedonmodels25C539,25C540,and25C541.
Followthedirectionsbelowtoinstalltheseitems:

1.Screwtheswivelconnector(F)(seebelow)into

thedesiredport(upperorlower)inthemotor(K).

2.Screwthenippleconnector(G)intotheair

regulator(H)outlet.Notearrowdirectionson
theregulator.

and

Muf󰘱ers

and and

Muf󰘱ers Muf󰘱ers

3.Attachtheairregulatorbyscrewingitintothe
swivelconnector.

4.Installaplug(E)intheportoppositetheregulator
(thisisnecessaryformotoroperation).

5.Attachtheairgauge(J)byscrewingitintothe
holeinthetopoftheairregulator.

6.Installaplug(E)intheregulatorintheport
oppositetheairgauge.

7.Screwonemuf󰘱er(D)intothetopofthemotor.

8.Screwthesecondmuf󰘱erintotheopenporton
thefarsideofthemotorfromtheregulator.

9.Installthethirdmuf󰘱erintheopenportabove
orbelowtheregulator.Anadditional󰘰ttingmay
beneeded(notprovided)tospacetheregulator
fartherawayfromthemotor.

NOTE:Useofthethirdmuf󰘱erisnotnecessary,
butisbene󰘰cialforincreasedaircirculationin
humidconditions.Ifathirdmuf󰘱erisnotused,
theholemustbeplugged(E).

Clockwise

Clockwise Clockwise

Reference

Reference Reference

D

Agitator

Agitator Agitator

Letter

Letter Letter

Rotation

Rotation Rotation

Description

Description Description

Muf󰘱ers

Counterclockwise

Counterclockwise Counterclockwise

Agitator

Agitator Agitator

Rotation

Rotation Rotation

EPlugs

F

G

HAirregulator

JAirgauge

KAirmotor

Swivelconnector

Nippleconnector

63A4797B

Installation

Agitator

Agitator Agitator

Toreducetheriskof󰘰reandexplosion,always
maintainaminimumof1in.(25.4mm)clearance
betweentherotatingagitatorpartsandthe
containertopreventsparksfromcontact.

•Ifinstallinganewagitatorontoanewtank,follow
steps1–2,and7–15(models25C536,25C537,
25C538).

•Ifreplacinganestablishedagitator,followsteps
1,3–12,and14–15(models25C539,25C540,
25C541).

1.Relievepressurefromthesystem(if

applicable)byfollowingtheprocedureinthe

PressureReliefProcedure,page11,andremove

thepressuretankcoverfromthetank.

2.Unscrewandremovethehexjamnut(49),plug

(P),ando-ring(R)fromthetankcover.

3.RemovetheupperU-bolt(56).

4.Loosenthetwoagitatorpaddlesetscrews(46)

andremovetheagitatorpaddle(45).

5.On10and15gallontanks,removethelower

U-bolt(56),loosenscrews(54),andslidethe
baf󰘱e(53)offthe󰘱uidtube(12).

6.Unscrewandremovethehexjamnut(49),

gasket(50),andagitatorfromthetankcover.

7.Toinstallthenewagitator,placethegasket(50)

ontopofthetankcovercenterhole.Insertthe
agitatorshaft(47)throughthegasketandcenter
hole.

NOTE:Positiontheairmotorandregulatoras
showninTypicalSystem,page5.

8.Installthejamnut(49)belowthetankcover,

andtighten󰘰rmlytoassureasealbetweenthe
gasket(50)andtankcover.

9.Installtheshaftsupport(44)ontotheshaft

housing(42).

10.ClampwithupperU-bolt(56),clamp(43),lock

washer(41),andnut(55).

12.Onthe5gallontank,clampthelowerU-bolt
directlytotheshaftsupport(44)(seebelow).
Slidethebaf󰘱e(53)overthe󰘱uidtube(12)and
positionthebaf󰘱eabout1/2in.(13mm)above
thehighestpointontheagitatorpaddle(45).
ClampinplacewiththelowerU-bolt(56),washer
(41),andnut(55).

Misalignmentbetweentheshaftand󰘱uidtube
maycausetheagitatorshafttobindwhen
clampingtheU-bolt(56)inplace.Loosenif
requiredtoallowshaftrotation.Theagitator
motorshouldrunat20psig(1.4bar)airpressure
whendry.

13.Aligntheagitatorpaddle(45)ontheagitator
shaft(47)asfollows:

•For10and15gallontanks:Alignthetopofthe

paddlehubwiththelowermarkontheagitator
shaft.

•For5gallontanks:Ifa5gallonpailistobe

placedinsidethepressuretank,alignthetop
ofthepaddlehubwiththeuppermarkonthe
agitatorshaft.Ifapailisnottobeplacedinside
thetank,alignthetopofthehubwiththelower
markontheagitatorshaft.Afterthepaddleis
properlyaligned,applylowstrengthsealantto
thetwosetscrews(46)and󰘰rmlysecurethe
paddle.

14.Removetheplugorexistingelbowfromtheair
inletmanifold(5).Installthenewelbow(69)into
thepressuretankairinletmanifold.

15.Connecttheswivelendoftheairhose(70)to
theelbow(69).

TightentheU-boltatapositionleaving
approximately0.015in.(0.006mm)clearance
gapbetweenthethrustwasherandthetopof
theshaftsupport.

11.Onthe10and15gallontanks,placethelower
bearingassembly(66)and(67)ontheshaft.

3A4797B

7

Installation

Table

Table Table

Agitator

1 11Agitator Agitator

Installation

Installation Installation

Ref

Ref Ref

12

41Washer53

42

43

44

45AgitatorPaddle66

46

47

49JamNutR

Description

No

Description Description

No No

FluidTube(includedwithmodels
25C536,25C537,25C538)

ShaftHousing

ClampPlate

ShaftSupport

SetScrew

AgitatorShaft

Ref

No

Ref Ref

No No

50

54

55

56U-Bolt

67

PPlug

Description

Description Description

Gasket

AgitatorBaf󰘱e

Screw

Nut

Bearing(models25C537,25C538,25C540,
25C541)

BearingHousing(models25C537,25C538,
25C540,25C541)

O-ring

83A4797B

Installation

Grounding

Grounding Grounding

Theequipmentmustbegroundedtoreducethe
riskofstaticsparking.Staticsparkingcancause
fumestoigniteorexplode.Toreducetherisk
ofstaticsparking,themountingcoverandall
electricallyconductiveobjectsordevicesinthe
sprayareamustbeproperlygrounded.

Agroundwireandclampareincludedwiththetank.

•Togroundtheagitator,connectoneendofthe

groundwire(GW)tothegroundconnector(77)on
agitatordriveguard(74).Connecttheotherendof
thegroundwiretoatrueearthground.

Connecting

Connecting Connecting

Installanairinlet󰘰lter(AF)upstreamfromtheair
inletballvalve(17)toremovedirtandmoisturefrom
thecompressedairsupply.Connectanairsupply
hose(SH)betweentheairinletballvalveandtheair
󰘰lterairoutlet.

Connecttheatomizingairhose(AH)totheairspray
gun(AG)fromanairoutletoftheairmanifold.

Connecta󰘱uidhose(FH)betweenthe󰘱uidoutlet
ballvalve(18)andtheairspraygun(AG)󰘱uidinlet.

Recommended

Recommended Recommended

Generalpurposehosesizesarelistedbelow.

FluidAir

Forrunsof:

0to35ft(0
to11m)

35to100ft
(11to30m)

100to200ft
(30to61m)

Hoses

Hoses Hoses

Use:

3/8"ID

1/2"ID

3/4"ID

Hose

Hose Hose

Sizes

Sizes Sizes

Forrunsof:

0to50ft(0
to15m)

50to100ft
(15to30m)

100ft+(30
m+)

Use:

5/16"ID

3/8"ID

1/2"ID

•Togroundthepressuretank,connectoneendof

a12awg(1.5mm
pressuretankandtheotherendofthewiretoa
trueearthground.

2

)minimumgroundwiretothe

Air

Line

Air Air

Line Line

Airline󰘰ltersremoveharmfuldirtandmoisturefrom
thecompressedairsupply.Orderpart106148for
3/8nptor106149for1/2npt.

Filter

Filter Filter

3A4797B9

Operation

Operation

Operation Operation

Personalinjury,suchassplashingintheeyes,
mayresultfrompressureinthetank.Alwaysfollow
thePressureReliefProcedure,page11before
openingthetankcoveror󰘰llport.

Personalinjuryorequipmentdamagemayresult
fromlifting/fallingheavyequipment.Toavoid
personalinjuryorequipmentdamage:

3.Besurethegroundwireisattached.

4.Replacethe󰘰llercaporcover,tightenthe
c-clamphandlesto8-10ft-lbs,approximately1/2
to1turnpasthandtight.

Operating

Operating Operating

the

Agitator

the the

Agitator Agitator

•Donotliftthedrumcoverandagitatorwithout
properassistance.

•Donotwalkorstandbeneatharaisedelevator.

Preparing

Preparing Preparing

Preparethe󰘱uidaccordingtomanufacturer
instructions.Strainthe󰘱uidtoremovelargeparticles
thatcouldclogthespraygunorthesiphontube.

Filling

Filling Filling

Agitatorsareusedtokeepsolidsinsuspension,
whichassistsinkeepingsolidsfromcloggingthe
siphontube.Ifsolidshavesettledinthecontainer,
useashakerorsomeotherdevicetothoroughly
agitatethe󰘱uidbeforeinstallingandoperatingthe
agitator.

1.FollowthePressureReliefProcedure,page11.

2.Fillthe󰘱uidsupplycontainer(throughthe󰘰llport
inthecover,orremovethecoverandpour󰘱uid
directlyintothetank)toabout3or4inches(75
to100mm)abovetheagitatorblade.

Ifutilizinga5-gallontank,useoneofthefollowing
methodsforpaintplacement:

a.Removethecoverandplacea5-gallonpail

b.Removethecoverandplacea5-gallon

the

Fluid

the the

Fluid Fluid

the

Tank

the the

Tank Tank

of󰘱uidinthe5-gallontank.

antistaticpolyethylenelinerinthe5-gallon
tank.Pourthe󰘱uidintotheantistatic
polyethyleneliner.

NOTE:Ifa5-gallonpailisusedinsidethe
tank,anadjustmentisrequiredtotheagitator
paddlepositiontoavoidinterference.See
step12inAgitator,page7foradjustment
information.

Over-pressurizingthetankoraccessoriescould
causeaparttorupture.Toreducetheriskof
seriousinjury,suchassplashing,orproperty
damage,neverexceedthemaximumairand󰘱uid
workingpressureofthelowestratedcomponent
inyoursystem.

NOTICE

NOTICE NOTICE

Toavoiddamagingtheequipment,donotoperate
theagitatoratahighspeedforalongperiodof
time.Excessiveagitatorspeedcancausefoaming
of󰘱uid(makingthe󰘱uidunusable),vibration,and
increasedwearonparts.Onlyagitatethe󰘱uid
enoughtomaintainevenmixing.

1.Fillthepressuretank.See

FillingtheTank,page10.

2.Besuretheairinletballvalve(17)isclosed.

3.Closetheairregulatorvalves(31,38)byturning
theknobscounterclockwise.

4.Turnontheairsupply.

5.Opentheairsupplyinletballvalve(17).

6.Tostarttheagitator,slowlyopentheagitatorair
regulatorvalve(38).Adjustthespeedofthe
agitator,toabout40to60rpm,ifneeded.

7.Openandadjustthetankairregulator(31)tothe
approximatepressuredesired.

8.Openthe󰘱uidoutletballvalve(18).

9.Turnontheatomizingairtotheairspraygun.
Testsprayasmallareaandadjustthepressure
asnecessary.Alwaysusethelowestpossibleair
pressuretoobtainthedesiredresults.

10.Tostoptheagitator,turntheairregulator
counterclockwisetoreducepressuretozero,or
closetheairinletballvalve(17)tothetank.

103A4797B

Operation

Pressure

Pressure Pressure

Theagitatorandpressuretanksremainpressurized
untilpressureismanuallyrelieved.Tohelpprevent
seriousinjuryfromsplashing󰘱uidandmoving
parts,followthisprocedure:

•Beforeyoucheckorserviceanypartofthespray
system

•Beforeyouloosenorremovethepressuretank
coverof󰘰llport

•Wheneveryoustopspraying

1.Shutofftheairsupplytothetankbyclosingthe
airinletvalve(17).

2.Openthedraincock󰘰tting(7)byturningit
counterclockwise.

3.Waituntilthereisnoairescapingthroughthe
draincock󰘰ttingbeforeremovingthecoveror
openingthe󰘰llport.

4.Leavethedraincock󰘰tting(7)openuntilyou
havereinstalledthecoveror󰘰llport.

Relief

Relief Relief

FollowthePressureReliefProcedure
wheneveryouseethissymbol.

Procedure

Procedure Procedure

Safety

Safety Safety

Asafetyreliefvalve(4)automaticallyrelievesthe
tankpressurewhentheairpressureexceeds95to
100psi(0.5to0.6MPa,6.5to7bar).

Eachweek,checktheworkingorderofthesafety
reliefvalve.
to95to105psi(0.5to0.6MPa,6.5to7.1bar).If
thesafetyreliefvalvedoesnotrelievethepressure,
replaceitimmediately.Donotattempttorepairit.
Thesafetyreliefvalvewillresetautomaticallywhen
thepressureisrelieved.

Relief

Relief Relief

Onlyasatest

Valve

Valve Valve

,raisetheairpressure

NOTE:Tightenthec-clampto8-10ft-lbs
(approximately1/2to1turnpasthandtight).

3A4797B

11

Maintenance

Maintenance

Maintenance Maintenance

Movingparts,suchasanimpellerblade,cancut
oramputate󰘰ngers.Toreducetheriskofserious
injury,alwaysshutofftheagitatoranddisconnect
theairlinebeforecheckingorrepairingtheagitator.

Beforeperforminganymaintenanceprocedure,
followthePressureReliefProcedure,page11.

Greasing

Greasing Greasing

Afterevery20millionrevolutionsoreverythree
tofourmonths(whichevercomes󰘰rst),grease
themotorneedlebearing.Recommendedgrease:
MOBILGREASEXHP222SPECIALorequivalent
withminimum󰘱ashpointtemperatureof399.2°F
(204°C).

1.FollowthePressureReliefProcedure,page11.

2.Removethemotortopcover(103).

3.Usingamanualgreasegun,pushgreaseinto
the21RC󰘰tting(102)untilgreaseisseenbelow
thetopwasher(109a).

the

Air

the the

Motor

Air Air

Motor Motor

Cleaning

Cleaning Cleaning

Toavoid󰘰reandexplosion,alwaysgroundthe
equipmentandwastecontainer.Toavoidstatic
sparkingandinjuryfromsplashing,always󰘱ushat
thelowestpossiblepressure.

•Flushequipmentonlyinawell-ventilatedarea.

•Flushatthelowestpressurepossible.Check
connectorsforleaksandtightenasnecessary.

•Flushwitha󰘱uidthatiscompatiblewiththe
󰘱uidbeingdispensedandtheequipmentwetted
parts.

1.FollowthePressureReliefProcedure,page11.

2.Followtheprocedurebelowtoforcethe󰘱uid
backthroughthehoseandintothetank:

a.Loosenthespraygunaircapretainingring

b.Holdaragovertheaircapandtriggerthe

3.Removethetankcover.

4.Emptythe󰘱uidfromthetankandpourasuitable
amountofsolventintoit

the

Tank

the the

Tank Tank

abouttwoturns.

gunforafewseconds,untilthe󰘱uidisforced
backintothetank.

Air

Motor

Air Air

Motor Motor

Dependingontheenvironmentofthemotor,
periodicallycheckthecleanlinessoftheairmotor
muf󰘱er.Dirtyorcloggedairmuf󰘱ersresultin
decreasedmotoref󰘰ciencyandmaycausethemotor
torunirregularly.Ifthemuf󰘱erisdirtyorclogged,
replaceitwithanewmuf󰘱er.

Cleaning

Cleaning Cleaning

Eachweek,cleananydried󰘱uidfromaroundthe
bearing(66)areaoftheshaft(47)andinspectthe
bearingforcrackingorexcessivewear.

12

Muf󰘱er

Muf󰘱er Muf󰘱er

the

Shaft

the the

Shaft Shaft

NOTE:Besurethatthesolventiscompatible
withthe󰘱uidbeingsprayedandwiththe
wettedmaterialsinthetank.Referto

TechnicalSpeci󰘰cations,page23forinformation

onwettedpartmaterials.

5.Replacethetankcoverandtightenthec-clamps,
to8-10ft-lbs,approximately1/2to1turnpast
handtight.

6.Closethedraincock󰘰tting(7).

7.Turnontheairsupply.

8.Holdametalpartofthegunagainstagrounded
metalwastecontainerandtriggertheguninto
thewastecontaineruntilcleansolventcomes
fromthegun.

9.Removethesolventfromthesystemand
wipetheinsideofthetankandtherestofthe
equipmentcleanwithasolvent-dampenedrag

3A4797B

Service

Service

Service Service

Movingparts,suchasanimpellerblade,cancut
oramputate󰘰ngers.Toreducetheriskofserious
injury,alwaysshutofftheagitatoranddisconnect
theairlinebeforecheckingorrepairingtheagitator.

Beforeperforminganyserviceprocedure,followthe

PressureReliefProcedure,page11.

Iftheairmotorrequiresmorethaninstallationofa
servicekit,itisusuallyquickestandeasiesttosend
ittoaGracodistributorforrepairorreplacement.A
motorrebuildkit(25M535)isavailable.Seethemotor
rebuildkitmanual3A5050formoreinformation.

Removing

Removing Removing

Toremovetheairmotorforservice,followthese
steps,

1.Removethescrew(75)holdingtheguardand
thenremovetheguard(74).

2.Removethefourscrews(26)securingthemotor
tothemountingbracket(58).

3.Removethethreescrews(35)securingthe
motor(34)theadapterplate(22).

4.Disconnecttheairregulator(38).

the

Air

the the

Motor

Air Air

Motor Motor

Installing

Installing Installing

Toinstalltheairmotor,followthesesteps.

1.Securethemotor(34)totheadapterplate(22)
usingthreescrews(35).Torqueto150–170
in-lbs(17–19N•m).

2.Installtheuppercouplinghalf(52b)onthemotor
shaft.Lightlytightenthesetscrew.Youwill
tightenitfurtherinalaterstep.

3.Installthelowercouplinghalf(52c)onthe
agitatorshaft(47).Donottightenthesetscrew
atthistime.

4.Installthemotor(34)andadapterplate(22)
assemblyonthetopofthebracket(58)using
thefourscrews(26).Donottightenthescrews
securelyatthistime.

the

Air

the the

Motor

Air Air

Motor Motor

3A4797B13

Service

Servicing

Servicing Servicing
Couplings

Couplings Couplings

Setting

Setting Setting

1.Withtheagitatorshaft(47)pushedupagainst
thewasher(48),securethelowerportionofthe
couplinghalf(52c)totheshaftbytighteningthe
couplingsetscrewagainstthe󰘱atontheshaft.
Leaveabouta0.015in.(0.38mm)gapbetween
thecouplinghalfandwasher(48).

2.Aligntheuppercoupling(52b)withthelower
couplingandtightenthefourscrews(26).
Tightento150–170in-lbs(17–19N•m).Leave
a0.015in.(0.38mm)gapbetweeneachofthe
couplinghalvesandthespider(52d).Tightenthe
setscrewonthelowercoupling(53b).

3.Connecttheairregulator(38).Checkfor
properalignmentbyrunningtheagitatoratlow
pressuresandspeeds.Ifnecessary,adjustthe
alignmentbylooseningandretighteningthefour
adapterplatescrews(26).

the

Agitator

the the

Agitator Agitator

the

Agitator

the the

Agitator Agitator

Shaft

Shaft Shaft

Shaft

Shaft Shaft

Coupling

Coupling Coupling

and

and and

Replacing

Replacing Replacing

1.Removetheagitatorpaddle(45).Removethe
setscrewfromthelowercoupling(52b).Pullout
theagitatorshaft(47)andinstallthenewshaft.
Replacetheagitatorpaddle(45).

2.Withtheagitatorshaft(47)pushedupagainst
thewasher(48),securethelowerportionofthe
couplinghalf(52b)totheshaftbytighteningthe
couplingsetscrewagainstthe󰘱atontheshaft.
Leaveabouta0.015in.(0.38mm)gapbetween
thecouplinghalfandwasher(48).

Replacing

Replacing Replacing

1.Removetheguardmountingscrew(75)and
removetheguard(74).

2.Removethethreecapscrews(51)andwashers
(40)fromthemountingbracket(58),andremove
theairmotorassembly.

3.Withairmotorassemblyremoved,removethe
setscrewfromthelowercouplinghalf(52b).Pull
outtheagitatorshaft(47).

4.Removethehexnut(49)andremovetheshaft
housing(42).Removetheseals(42a)fromthe
shafthousing,andinstallthenewseals.

5.Reinstalltheshafthousingandshaft.Use
installationstepslistedinSettingtheAgitator
ShaftCoupling.

the

Agitator

the the

Agitator Agitator

the

Shaft

the the

Shaft Shaft

Shaft

Shaft Shaft

Seals

Seals Seals

Installing

Installing Installing

Followthesestepstoinstallthemotorconversion
kit19A844.

1.Removetheexistingmotorandgearbox.See
manual308371forinstructions.

2.Installtheairmotor.See

InstallingtheAirMotor,page13and
SettingtheAgitatorShaftCoupling,page14.

3.Installtheairregulatorandmuf󰘱ers.See

AirRegulatorandMuf󰘱ers,page6.

4.Attachthe󰘰ttings(36,8)andthehose(70)to
completetheconversion.

the

Motor

the the

Motor Motor

Conversion

Conversion Conversion

Kit Kit

Kit

14

3A4797B

Parts

1

2

3

Parts

Parts Parts

All

Models

All All

Models Models

Locatethebottomshoulderoftheshaft(47)
againstthewasher(48)whenassembling
thecoupler(52).

Bearings66and67arenotusedonthe
5-gallonmodel.AttachtheU-bolt(56)tothe
supportshaft(44).

3A4797B15

Applylow-strength(cyanoacrylate)thread
sealant.

Followrecommendedtorquespeci󰘰cationsfound
intheInstallationsectionofthismanual.

Parts

Ref

Ref Ref

Part

No.

Part Part

No.

No. No.

100030Bushing1

8**

22**

26**

17R038Plate,Adapter,Agitator1

100057

34**25C675

35**

124313

36156823

37156971

Description

No. No.

Description Description

Screw,Cap,SocketHead

Motor,Air,RotaryPiston;
includes36,37,38,39

Screw,Shcs,M6-1x16
mm,StainlessSteel

Fitting,Union,Swivel

Fitting,Nipple,Short

38116513Regulator,Air1

39108190

Gauge,Pressure,Air

40100020Washer,Lock3

41104123

42236092

42a103553

42b104431

43112533

44210576

236098Paddle,Agitator;plastic1

45*

46112230

Washer,Lock,Spring

HousingAssembly,Shaft;
includes42aand42b

Seal,shaft

Seal,shaft

Plate,Clamp

Support,Shaft;includes
item66

Screw,Set,Sch

Shaft,Agitator;15inches;

188886

Models25C536and
25C539

Shaft,Agitator;21inches;

188887

Models25C537and
25C540

Shaft,Agitator;31inches;

188888

Models25C538and
25C541

Ref

Ref Ref

Part

No.

Qty

Qty Qty

Part Part

No.

No. No.

Description

No. No.

Description Description

Qty

Qty Qty

48104373Washer,Thrust2

49188784Nut,Jam,Hex1

4

1

50196309

Gasket

3

3

2

1

51102598

52**

17R478

53171989

1

6

54112222

55

112223Nut,Hex,Regular6

56110278Bolt,U2

Screw,Cap,SocketHead

Coupling,Flexible

Baf󰘱e,Agitator

Screw,Cap,Sch

3

1

1

2

58181749Bracket,Mounting1

1

1

66171970

1

1

67187324

Bearing,PTFE;included
withmodels25C540and
25C541only

Housing,Bearing;included
withmodels25C540and

1

1

25C541only

1

2

1

69112307

70160023

74194701

75

100078

Fitting,StreetElbow

Hose,Coupled

Guard,Agitator,Drive

Screw,ThreadForming,
HexHead

1

1

1

1

76157021Washer,Lock,Int1

77

1 47

111593

78186620

▲

1

▲

80

17P806

Replacementsafetylabels,signs,tags,and

Screw,Grounding

Label,Symbol,Ground

SafetyTag(notshown)

1

1

1

cardsareavailableatnocost.

*Awelded304stainlesssteelpaddleisavailable.
Orderpartnumber186517.

**IncludedwithMotorConversionKit19A844.

163A4797B

Parts

Tank

Tank Tank

Parts

Parts Parts

for

Models

for for

Models Models

25C536,

25C536, 25C536,

25C537,

25C537, 25C537,

25C538

25C538 25C538

3A4797B

17

Parts

Ref

Ref Ref

Part

No.

Part Part

No.

No. No.

Description

No. No.

Description Description

1100361Plug,Pipe1

2100840

3164724

4103347

5

189016

6112306

7

101759

8100030

9112538

10176347

11110475

171976

171975

12

171974

Fitting,Elbow,Street

Hose,Coupled

Valve,Safety;100Psi

Manifold,Air,Inlet

Plug,Pipe,StainlessSteel;
3/8Npt

Fitting,Cock,Drain

Bushing;1/8-27npt(f)x
1/4-18npt(m)

Fitting,Elbow,Street;90
Degree

Label,Identi󰘰cation

Fitting,Tee,Street

Tube,13inches;Model
265C536

Tube,18inches;Model
265C537

Tube,29inches;Model
265C538

14156849Pipe,Nipple1

15171988

16110756

Gasket

Elbow,Street;90Degree

Valve,Ball

17208390

3/8-18npsm(m)x3/8-18
npt(m)

Valve,Ball;316Stainless

18237533

Steel
3/8-18npsm(m)x3/8-18
npt(m)

Ref

Ref Ref

Part

No.

Qty

Qty Qty

Part Part

No.

No. No.

20210575

2

21159239

1

▲

1

23

1

175078Label,Warning1

25104813Plug,Pipe1

No. No.

Description

Description Description

Cap,Filler

Fitting,Nipple,Pipe
Reducing

Qty

Qty Qty

1

1

TankAssembly,Pressure;

1

236087

5Gallon,Model25C536;

1

includesgasket117571

1

236088

1

TankAssembly,Pressure;
10Gallon,Model25C537;
includesgasket117571

1 27

TankAssembly,Pressure;

1

236089

15Gallon,Model25C538;

1

includesgasket117571

1

1

15D059

Liner,Tank;5Gallon,
Model25C536;qtyof20

1

(notshown)

1

15D060

1

Liner,Tank;10Gallon,
Model25C537;qtyof20
(notshown)

1 29

Liner,Tank;15Gallon,

1

15D061

Model25C538;qtyof8

1

(notshown)

30160430

1

1

1

1

31171937Regulator,Air1

32155665Union,Adapter1

60222011

▲

80

▲

17P806

Replacementsafetylabels,signs,tags,and

cardsareavailableatnocost.

Gauge,Pressure,Air

Clamp,Grounding

SafetyTag(notshown)

1

1

1

183A4797B

Accessories

Accessories

Accessories Accessories

Strainer

Strainer Strainer

300psi(2.1MPa,21bar)MaximumWorking
Pressure

Installatthetankairinlettoremovedirtandmoisture
fromtheairsupply,oratthetank󰘱uidoutletto
removeparticlesfromthepaintwhichcouldclogthe
spraygunnozzle.

Buna

Buna Buna

200psi(1.4MPa,14bar)MaximumWorking
Pressure

5/16”ID;cpld1/4npsm(f)swivel

Low

Low Low
Kit

235041

Kit Kit

235041 235041

5psi(0.1MPa,1bar)WorkingPressure.0to15psi
(0to0.1MPa,0to1bar)regulatedpressurerange

Toconverttoalow-pressureregulatorassembly.

240418

240418 240418

N

Air

- --N N

Pressure

- --Pressure Pressure

Supply

Air Air

Supply Supply

Hose

Hose Hose

Regulator

Regulator Regulator

Conversion

Conversion Conversion

Nylon

Nylon Nylon

300psi(2.1MPa,21bar)MaximumWorking
Pressure

3/8”ID;cpld3/8npsm(fbe)swivel;neoprenecover

Bottom

Bottom Bottom

Forbottomoutlet󰘱uidfeeding

Heavy

Heavy Heavy

Toconverttoaheavydutyagitatorassembly.
Recommendedfor󰘱uidviscositiesover1000cP.

•236661 236661

•236662 236662

•236663 236663

C CC- --clamp clamp

Fluid

Fluid Fluid

Duty

Duty Duty

236661

236662

236663

clamp

Supply

Supply Supply

Outlet

Outlet Outlet

Agitator

Agitator Agitator

5-gallontanksize

10-gallontanksize

15-gallontanksize

Replacement

Replacement Replacement

Hose

Hose Hose

Kit

236677

Kit Kit

236677 236677

Kit

111381

Kit Kit

111381 111381

High

High High
Kit

Kit Kit

100psi(0.7MPa,7bar)WorkingPressure.0to100
psi(0to0.7MPa,0to7bar)regulatedpressure
range

Toconverttoahigh-pressureregulatorassembly

Air

Air Air

100psi(0.7MPa,7bar)MaximumWorkingPressure

Forairregulationand󰘰ltration

Gun

Gun Gun

100psi(0.7MPa,7bar)WorkingPressure

Tosupplyatomizingairtoaspraygunfromthe
pressurepot

Pressure

- --Pressure Pressure

236680

236680 236680

Regulator

Regulator Regulator

Air

Regulator

Air Air

Regulator Regulator

Regulator

Regulator Regulator

and

Filter

and and

Filter Filter

Kit

Kit Kit

Conversion

Conversion Conversion

202660

202660 202660

235042

235042 235042

ToreplacethepressuretankC-clampassembly.The
kitincludestheT-handle,C-clamp,pin,andcotter
pin.

Antistatic

Antistatic Antistatic

Liners󰘰tinsidethetank.Foreaseofcleanupand
maintenance.

15D059

•15D059 15D059

15D060

•15D060 15D060

15D061

•15D061 15D061

Stainless

Stainless Stainless
186517

186517 186517

Materialof304stainlesssteelweldedconstruction.
Replacesplasticagitatorpaddle236098.

Polyethylene

Polyethylene Polyethylene

5-gallontanksize(Quantityof20)

10-gallontanksize(Quantityof20)

15-gallontanksize(Quantityof8)

Steel

Steel Steel

Agitator

Agitator Agitator

Tank

Tank Tank

Paddle

Paddle Paddle

Liners

Liners Liners

PTFE

PTFE PTFE

Optionalreplacementforstandard117571gasket.

3A4797B19

Coated

Coated Coated

Gasket

Gasket Gasket

117574

117574 117574

Dimensions

Dimensions

Dimensions Dimensions

Reference

Reference Reference

A

B

C12.6in(320.5mm)

Dimension

Dimension Dimension

19in.(483mm)

14in.(356mm)

Reference

Reference Reference

D

E

Dimension

Dimension Dimension

5gallons:13.2in.(335mm)
10gallons:18.2in.(462mm)
15gallons:28.9in.(735mm)

5gallons:30.5in.(775mm)
10gallons:33.9in.(860mm)
15gallons:44.6in.(1132mm)

Reference

Reference Reference

A

Dimension

Dimension Dimension

25C539:25.5in.(648mm)
25C54031.3in.(794mm)
25C54141.5in.(1054mm)

Reference

Reference Reference

B

Dimension

Dimension Dimension

11.7in.
(297mm)

203A4797B

AirConsumption

0

5

10

15

20

0

8.5

17.0

25.5

34.0

0 200 400 600 800 1000 1200

A

B

C

D

Air

Air Air

Consumption

Consumption Consumption

Standard

SCFM

AirMotorRPM

Cubic
Meters/Hr

A—20psi(1.4bar,0.14MPa)

B—40psi(2.8bar,0.28MPa)

C—60psi(4.1bar,0.41MPa)

D—80psi(5.5bar,0.55MPa)

3A4797B

21

Notes

Notes

Notes Notes

22

3A4797B

TechnicalSpecications

Technical

Technical Technical

Agitators

Agitators Agitators
Actualtankcapacities

Tankinlet/outletsizes

Wettedparts

Weight

Maximumworkingpressure,high
pressureregulatedtank

Maximumrecommendedoperating
pressure,agitator

Tankreliefvalvesetting100psi(0.7MPa,7bar)

Maximumallowableprocess󰘱uid
temperature

Recommendedagitatorspeed
rangeforadequateagitation

Recommendedmaximumagitator
speed

Recommendedmaximummaterial
viscosity

Soundpressurelevelat70psig,
maximumrecommendedspeed

Note:

Note: Note:

—

Stainless

— —

Stainless Stainless

5-gallon

10-gallon

15-gallon

Airinletsize

Fluidoutletsize

Bottomoutletsize

25C53666lbs(30kg)

25C53777lbs(35kg)

25C53893lbs(42kg)

25C53913lbs(5.9kg)
25C54014lbs(6.4kg)

25C54115lbs(6.8kg)

Santoprene

Speci󰘰cations

Speci󰘰cations Speci󰘰cations

Steel,

Heavy

Steel, Steel,

Heavy Heavy

®

isaregisteredtrademarkoftheMonsantoCo.

Duty,

Air

Duty, Duty,

8.8gallons(33liters)

12.6gallons(48liters)

19.3gallons(72liters)

1/4–18npt(m)

3/8–18npsm(m)

3/4–14npt(f)
304and316stainlesssteel,PTFE,nylon,andbronze.

Splashedmaterials:LDPE,Chloroprene,Santoprene

100psig(0.7MPa,7bar)

70psig(0.5MPa,5bar)

158°F(70°C)

40–60rpm

150rpm

1000cP

Lessthan75dBA

Driven

Air Air

- --Driven Driven

California

California California

WARNING:

WARNING: WARNING:

Proposition

Proposition Proposition

65

65 65

ThisproductcanexposeyoutochemicalsknowntotheStateofCalifornia
tocausecancerandbirthdefectsorotherreproductiveharm.Formoreinformation,goto
www.P65warnings.ca.gov.

3A4797B23

Graco

Graco Graco

GracowarrantsallequipmentreferencedinthisdocumentwhichismanufacturedbyGracoand
bearingitsnametobefreefromdefectsinmaterialandworkmanshiponthedateofsaletotheoriginal
purchaserforuse.Withtheexceptionofanyspecial,extended,orlimitedwarrantypublishedby
Graco,Gracowill,foraperiodoftwelvemonthsfromthedateofsale,repairorreplaceanypartofthe
equipmentdeterminedbyGracotobedefective.Thiswarrantyappliesonlywhentheequipmentis
installed,operatedandmaintainedinaccordancewithGraco’swrittenrecommendations.

Thiswarrantydoesnotcover,andGracoshallnotbeliableforgeneralwearandtear,orany
malfunction,damageorwearcausedbyfaultyinstallation,misapplication,abrasion,corrosion,
inadequateorimpropermaintenance,negligence,accident,tampering,orsubstitutionofnon-Graco
componentparts.NorshallGracobeliableformalfunction,damageorwearcausedbythe
incompatibilityofGracoequipmentwithstructures,accessories,equipmentormaterialsnotsupplied
byGraco,ortheimproperdesign,manufacture,installation,operationormaintenanceofstructures,
accessories,equipmentormaterialsnotsuppliedbyGraco.

Thiswarrantyisconditionedupontheprepaidreturnoftheequipmentclaimedtobedefectivetoan
authorizedGracodistributorforveri󰘰cationoftheclaimeddefect.Iftheclaimeddefectisveri󰘰ed,
Gracowillrepairorreplacefreeofchargeanydefectiveparts.Theequipmentwillbereturnedto
theoriginalpurchasertransportationprepaid.Ifinspectionoftheequipmentdoesnotdiscloseany
defectinmaterialorworkmanship,repairswillbemadeatareasonablecharge,whichchargesmay
includethecostsofparts,labor,andtransportation.

THIS

WARRANTY

THIS THIS

WARRANTY WARRANTY

OR

IMPLIED,

OR OR

IMPLIED, IMPLIED,

WARRANTY

WARRANTY WARRANTY

Graco’ssoleobligationandbuyer’ssoleremedyforanybreachofwarrantyshallbeassetforthabove.
Thebuyeragreesthatnootherremedy(including,butnotlimitedto,incidentalorconsequential
damagesforlostpro󰘰ts,lostsales,injurytopersonorproperty,oranyotherincidentalorconsequential
loss)shallbeavailable.Anyactionforbreachofwarrantymustbebroughtwithintwo(2)yearsof
thedateofsale.

GRACO

GRACO GRACO
MERCHANTABILITY

MERCHANTABILITY MERCHANTABILITY
ACCESSORIES,

ACCESSORIES, ACCESSORIES,
BY

BY BY
hose,etc.),aresubjecttothewarranty,ifany,oftheirmanufacturer.Gracowillprovidepurchaserwith
reasonableassistanceinmakinganyclaimforbreachofthesewarranties.

InnoeventwillGracobeliableforindirect,incidental,specialorconsequentialdamagesresulting
fromGracosupplyingequipmenthereunder,orthefurnishing,performance,oruseofanyproductsor
othergoodssoldhereto,whetherduetoabreachofcontract,breachofwarranty,thenegligenceof
Graco,orotherwise.

FORGRACOCANADACUSTOMERS

ThePartiesacknowledgethattheyhaverequiredthatthepresentdocument,aswellasalldocuments,
noticesandlegalproceedingsenteredinto,givenorinstitutedpursuantheretoorrelatingdirectlyor
indirectlyhereto,bedrawnupinEnglish.Lespartiesreconnaissentavoirconvenuquelarédaction
duprésentedocumentseraenAnglais,ainsiquetousdocuments,avisetprocéduresjudiciaires
exécutés,donnésouintentés,àlasuitedeouenrapport,directementouindirectement,avecles
procéduresconcernées.

MAKES

MAKES MAKES

GRACO.

GRACO. GRACO.

IS

EXCLUSIVE,

IS IS

INCLUDING

INCLUDING INCLUDING

OF

OF OF

Theseitemssold,butnotmanufacturedbyGraco(suchaselectricmotors,switches,

EXCLUSIVE, EXCLUSIVE,

BUT

FITNESS

FITNESS FITNESS

NO

NO NO

EQUIPMENT,

EQUIPMENT, EQUIPMENT,

BUT BUT
FOR

FOR FOR

WARRANTY,

WARRANTY, WARRANTY,
AND

FITNESS

AND AND

FITNESS FITNESS

MATERIALS

MATERIALS MATERIALS

Standard

Standard Standard

AND

IS

IN

AND AND

NOT

LIMITED

NOT NOT

LIMITED LIMITED

PARTICULAR

A AAPARTICULAR PARTICULAR

AND

AND AND

FOR

FOR FOR

LIEU

IS IS

IN IN

LIEU LIEU

TO

WARRANTY

TO TO

WARRANTY WARRANTY

PURPOSE.

PURPOSE. PURPOSE.

DISCLAIMS

DISCLAIMS DISCLAIMS

PARTICULAR

A AAPARTICULAR PARTICULAR

OR

COMPONENTS

OR OR

COMPONENTS COMPONENTS

Warranty

Warranty Warranty

OF

ANY

OF OF

ALL

ALL ALL

OTHER

ANY ANY

OTHER OTHER

IMPLIED

IMPLIED IMPLIED

PURPOSE,

PURPOSE, PURPOSE,

WARRANTIES,

WARRANTIES, WARRANTIES,

OF

MERCHANTABILITY

OF OF

MERCHANTABILITY MERCHANTABILITY

WARRANTIES

WARRANTIES WARRANTIES

IN

CONNECTION

IN IN

SOLD

SOLD SOLD

CONNECTION CONNECTION

BUT

NOT

BUT BUT

NOT NOT

EXPRESS

EXPRESS EXPRESS

OR

OR OR

OF

OF OF

WITH

MANUFACTURED

MANUFACTURED MANUFACTURED

WITH WITH

Graco

Graco Graco

ForthelatestinformationaboutGracoproducts,visitwww.graco.com.
Forpatentinformation,seewww.graco.com/patents.

To

To To

Phone:

Phone: Phone:

Allwrittenandvisualdatacontainedinthisdocumentre󰘱ectsthelatestproductinformationavailableatthetimeofpublication.

Information

Information Information

place

an

place place

an an

612-623-6921or ororToll Toll

GRACO

GRACO GRACO

order,

order, order,

contactyourGracoDistributororcalltoidentifythenearestdistributor.

Toll

Free:

Free: Free:

1-800-328-0211Fax: Fax:

Gracoreservestherighttomakechangesatanytimewithoutnotice.

OriginalInstructions.ThismanualcontainsEnglish.MM3A4797

Graco

International

International International

INC.

AND

INC. INC.

Copyright

Copyright Copyright

SUBSIDIARIES

AND AND

SUBSIDIARIES SUBSIDIARIES

2019,

Graco

2019, 2019,

Graco Graco

Graco Graco

Inc.

Inc. Inc.

Headquarters:

Headquarters: Headquarters:

Of󰘰ces:

Of󰘰ces: Of󰘰ces:

P.O.

• ••P.O. P.O.

All

Graco

All All

manufacturing

Graco Graco

manufacturing manufacturing

www.graco.com

RevisionB,2019–04

Fax:

612-378-3505

Belgium,China,Japan,Korea

BOX

BOX BOX

Minneapolis

1441

MINNEAPOLIS

1441 1441

• ••MINNEAPOLIS MINNEAPOLIS
locations

locations locations

MN

55440-1441

MN MN

are

are are

55440-1441 55440-1441

registered

registered registered

USA

• ••USA USA

ISO

9001.

to totoISO ISO

9001. 9001.