Page 1
Kit Instructions
Air Motor Upgrade Kit
For installing the air motor upgrade kit on DynaMite™190 Extruder.
Kit No. 25A623
Important Safety Instructions
Read all warnings and instructions in the
DynaMite™ 190 Extruder Instructions manual.
Save all instructions.
3A4163A
EN
1
8
Air Motor Upgrade Kit Installation
25A623 Parts
Ref Part Description Qty
1 25A641 MOTOR, air, 2.5 in., .75 in.
6
7
2
2 112120 PIN, spring 1
3 17J517 SPACER 3
4 17J516 ADAPTER 1
5 --- SCREW, shcs, 3/8-24 x 1.00, zc 3
6 110874 WASHER, flat 3
7 110873 SCREW, cap, hex hd 3
8 112188 FITTING, elbow 1
stroke
1
Instructions
Refer to the DynaMite™ 190 Extruder Instructions manual to
remove the old air motor and install the air motor upgrade
3
kit.
4
5
Page 2
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 3A4163
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2016, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco Headquarters: Minneapolis
www.graco.com
Revision A,
May 2016
Loading...