Goodman ANX, SSX, ASX, GSX, DSX User Manual

Service Instructions

ANX, SSX, ASX, GSX, DSX

Condensing Units,

ANZ, SSZ, ASZ, GSZ, DSZ, VSX, VSZ Split System Heat Pumps

with R-410A Refrigerant

Blowers, Coils, & Accessories

This manual is to be used by qualified, professionally trained HVAC technicians only. The manufacturer does not assume any responsibility for property damage or personal injury due to improper service procedures or services performed by an unqualified person.

RS6200006r87

December 2017

Copyright © 2006 - 2017 Goodman Manufacturing Company, L.P.

Table of Contents

IMPORTANT INFORMATION ...................................................	2	SPLIT SYSTEM HEAT PUMPS ..........................................	12
PRODUCT IDENTIFICATION - MODEL TREES .....................	4	AIR HANDLERS ................................................................	40
COILS ..................................................................................	6	COILS ................................................................................	48
BLOWERS ..........................................................................	7	ACCESSORIES - LIGHT COMMERCIAL ..............................	52
AIR HANDLERS ..................................................................	8	MODELS TO KITS MATCHUP ...........................................	53
LIGHT COMMERCIAL .......................................................	10	ASSOCIATED KITS ...........................................................	62
PRODUCT IDENTIFICATION - CHARTS ..............................	11	PRODUCT DESIGN ..............................................................	74
LIGHT COMMERCIAL .......................................................	11	SYSTEM OPERATION ...........................................................	77
IMPORTANT INFORMATION		TROUBLESHOOTING CHART .............................................	81

Pride and workmanship go into every product to provide our customers with quality products. It is possible, however, that during its lifetime a product may require service. Products should be serviced only by a qualified service technician who is familiar with the safety procedures required in the repair and who is equipped with the proper tools, parts, testing instruments and the appropriate service manual. REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE SERVICE MANUAL BEFORE BEGINNING REPAIRS.

IMPORTANT NOTICES FOR CONSUMERS AND SERVICERS

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

THIS UNIT SHOULD NOT BE CONNECTED TO. OR USED IN CONJUNCTION WITH, ANY DEVICES THAT ARE NOT DESIGN CERTIFIED FOR USE WITH THIS UNIT OR

HAVE NOT BEEN TESTED AND APPROVED BY THE MANUFACTURER. SERIOUS PROPERTY DAMAGE OR PERSONAL INJURY, REDUCED UNIT PERFORMANCE

AND/OR HAZARDOUS CONDITIONS MAY RESULT FROM THE USE OF DEVICES THAT HAVE NOT BEEN APPROVED OR CERTIFIED BY THE MANUFACTURER.

TO PREVENT THE RISK OF PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH, DO NOT STORE COMBUSTIBLE MATERIALS OR USE GASOLINE OR OTHER FLAMMABLE LIQUIDS OR VAPORS IN THE VICINITY OF THIS APPLICANCE.

HIGH VOLTAGE

DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT.

FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

ONLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL, ADJUST, SERVICE OR REPAIR (HEREINAFTER, “SERVICE”) THE EQUIPMENT SPECIFIED IN THIS MANUAL SHOULD SERVICE THE EQUIPMENT. THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY INJURY OR PROPERTY DAMAGE ARISING FROM IMPROPER SERVICE OR SERVICE PROCEDURES. IF YOU SERVICE THIS UNIT, YOU ASSUME RESPONSIBILITY FOR ANY INJURY OR PROPERTY DAMAGE WHICH MAY RESULT. IN ADDITION, IN JURISDICTIONS THAT REQUIRE ONE OR MORE LICENSES TO SERVICE THE EQUIPMENT SPECIFIED IN THIS MANUAL, ONLY LICENSED PERSONNEL SHOULD SERVICE THE EQUIPMENT. IMPROPER INSTALLATION, ADJUSTMENT, SERVICING OR REPAIR OF THE EQUIPMENT SPECIFIED IN THIS MANUAL, OR ATTEMPTING TO INSTALL, ADJUST, SERVICE OR REPAIR THE EQUIPMENT SPECIFIED IN THIS MANUAL WITHOUT PROPER TRAINING MAY RESULT IN PRODUCT DAMAGE, PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

To locate an authorized servicer, please consult your telephone book or the dealer from whom you purchased this product. For further assistance, please contact:

CONSUMER INFORMATION LINE

GOODMAN® BRAND PRODUCTS			AMANA® BRAND PRODUCTS
TOLL FREE			TOLL FREE
1-877-254-4729 (U.S. only)			1-877-254-4729 (U.S. only)
email us at: [e-mail]		email us at: [e-mail]
fax us at: [phone]			fax us at: [phone]
(Not a technical assistance line for dealers.)			(Not a technical assistance line for dealers.)
Outside the U.S., call 1-713-861-2500.
(Not a technical assistance line for dealers.)		Your telephone company will bill you for the call.

is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.

2

IMPORTANT INFORMATION

SAFE REFRIGERANT HANDLING

While these items will not cover every conceivable situation, they should serve as a useful guide.

REFRIGERANTS ARE HEAVIER THAN AIR. THEY CAN “PUSH OUT” THE OXYGEN IN YOUR LUNGS OR IN ANY ENCLOSED SPACE. TO AVOID POSSIBLE DIFFICULTY IN BREATHING OR DEATH:

• NEVER PURGE REFRIGERANT INTO AN ENCLOSED ROOM OR SPACE. BY LAW, ALL REFRIGERANTS MUST BE RECLAIMED.

• IF AN INDOOR LEAK IS SUSPECTED, THOROUGHLY VENTILATE THE ARA BEFORE BEGINNING WORK.

• LIQUID REFRIGERANT CAN BE VERY COLD. TO AVOID POSSIBLE FROSTBITE OR BLINDNESS, AVOID CONTACT WITH REFRIGERANT AND WAR GLOVES AND GOGGLES. IF LIQUID REFRIGERANT DOES CONTACT YOUR SKIN OR EYES, SEEK MEDICAL HELP IMMEDIATELY.

• ALWAYS FOLLOW EPA REGULATIONS. NEVER BURN REFRIGERANT, AS POISONOUS GAS WILL BE PRODUCED.

THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY ("EPA") HAS ISSUED VARIOUS REGULATIONS REGARDING THE INTRODUCTION AND DISPOSAL OF REFRIGERANTS INTRODUCED INTO THIS UNIT. FAILURE TO FOLLOW THESE REGULATIONS MAY HARM THE ENVIRONMENT AND CAN LEAD TO THEH IMPOSITION OF SUBSTANTIAL FINES. THESE REGULATIONS MAY VARY BY JURISDICTION. SHOULD QUESTIONS ARISE, CONTACT YOUR LOCAL EPA OFFICE.

TO AVOID POSSIBLE EXPLOSION:

• NEVER APPLY FLAME OR STEAM TO A REFRIGERANT CYLINDER. IF YOU MUST HEAT A CYLINDER FOR FASTER CHARGING, PARTIALLY IMMERSE IT IN WARM WATER.

•NEVER FILL A CYLINDER MORE THAN 80% FULL OF LIQUID REFRIGERANT.

•NEVER ADD ANYTHING OTHER THAN R-22 TO AN R-22 CYLINDER OR R-

410A TO AN R-410A CYLINDER. THE SERVICE EQUIPMENT USED MUST BE LISTED OR CERTIFIED FOR THE TYPE OF REFRIGERANT USED.

• STORE CYLINDERS IN A COOL, DRY PLACE. NEVER USE A CYLINDER AS A PLATFORM OR A ROLLER.

TO AVOID POSSIBLE EXPLOSION, USE ONLY RETURNABLE (NOT DISPOSABLE) SERVICE CYLINDERS WHEN REMOVING REFRIGERANT FROM A SYSTEM.

• ENSURE THE CYLINDER IS FREE OF DAMAGE WHICH COULD LEAD TO A LEAK OR EXPLOSION.

•ENSURE THE HYDROSTATIC TEST DATE DOES NOT EXCEED 5 YEARS.

•ENSURE THE PRESSURE RATING MEETS OR EXCEEDS 400 PSIG.

WHEN IN DOUBT, DO NOT USE CYLINDER.

TO AVOID POSSIBLE INJURY, EXPLOSION OR DEATH, PRACTICE SAFE HANDLING OF REFRIGERANTS.

SYSTEM CONTAMINANTS, IMPROPER SERVICE PROCEDURE AND/OR PHYSICAL ABUSE AFFECTING HERMETIC COMPRESSOR ELECTRICAL TERMINALS MAY CAUSE DANGEROUS SYSTEM VENTING.

The successful development of hermetically sealed refrigeration compressors has completely sealed the compressor's moving parts and electric motor inside a common housing, minimizing refrigerant leaks and the hazards sometimes associated with moving belts, pulleys or couplings.

Fundamental to the design of hermetic compressors is a method whereby electrical current is transmitted to the compressor motor through terminal conductors which pass through the compressor housing wall. These terminals are sealed in a dielectric material which insulates them from the housing and maintains the pressure tight integrity of the hermetic compressor. The terminals and their dielectric embedment are strongly constructed, but are vulnerable to careless compressor installation or maintenance procedures and equally vulnerable to internal electrical short circuits caused by excessive system contaminants.

In either of these instances, an electrical short between the terminal and the compressor housing may result in the loss of integritybetweentheterminalanditsdielectricembedment. This loss may cause the terminals to be expelled, thereby venting the vaporous and liquid contents of the compressor housing and system.

A venting compressor terminal normally presents no danger to anyone, providing the terminal protective cover is properly in place.

If, however, the terminal protective cover is not properly in place, a venting terminal may discharge a combination of

(a)hot lubricating oil and refrigerant

(b)flammable mixture (if system is contaminated with air)

in a stream of spray which may be dangerous to anyone in the vicinity. Death or serious bodily injury could occur.

Under no circumstances is a hermetic compressor to be electrically energized and/or operated without having the terminal protective cover properly in place.

See Service Section S-17 for proper servicing.

3

PRODUCT IDENTIFICATION

	A N Z			13	018	1	AA
	1	2	3	4,5	6,7,8	9	10,11
Brand										Engineering
A -	Amana® brand									Major/Minor Revisions
Type										Voltage
N	Deluxe Split System							1	- 208/230V Single-Phase 60 Hz
								2	- 220/240V Single-Phase 50 Hz
Type								3	- 208/230V Three-Phase 60 Hz
X:	Condenser R-410A							4	- 460V Three-Phase 60 Hz
Z:	Heat Pump R-410A							5	- 380/415V Three-Phase 50 Hz
SEER
11 - 11 SEER
13 - 13 SEER
14 - 14 SEER										Nominal Capacity
16 - 16 SEER					18 =	1-1/2 Tons			42 =	3-1/2 Tons
					24 =	2 Tons			48 =	4 Tons
					30 =	2-1/2 Tons			59 =	5 Tons
					36 =	3 Tons			60 =	5 Tons
									61 =	5 Tons

4

PRODUCT IDENTIFICATION
	S S Z			14	036	1 AA
	1	2	3	4,5	6,7,8	9	10,11
Brand							Engineering
G	Goodman® brand						Major/Minor Revisions
	(Standard Feature Set)
S	Goodman® brand
	(High Feature Set)
A	Amana® brand
	Deluxe
D	Goodman® brand
	Deluxe
V	Value Line

Type			Voltage
S	Split System	1	- 208/230V Single-Phase 60 Hz
		2	- 220/240V Single-Phase 50 Hz
Type		3	- 208/230V Three-Phase 60 Hz
X:	Condenser R-410A	4	- 460V Three-Phase 60 Hz
Z:	Heat Pump R-410A	5	- 380/415V Three-Phase 50 Hz

SEER
13 - 13 SEER	018		= 1-1/2 Tons	042	= 3-1/2 Tons
14 - 14 SEER	024		= 2 Tons	048	= 4 Tons
16 - 16 SEER	030		= 2-1/2 Tons	059	= 5 Tons
18 - 18 SEER	036		= 3 Tons	060	= 5 Tons
	038		= 3 Tons

5

PRODUCT IDENTIFICATION

	C A P F				1824	A	6	AA
	1	2	3	4	5,6,7,8	9	10	11,12
Brand										Engineering*
C	Indoor Coil									Major/Minor Revisions
										Refrigerant Charge
Unit Application										2 = R-22
A	Upflow/Downflow Coil									4 = R-410A
H	Horizontal A-Coil									6 = R-410A or R-22
S	Horizontal Slab Coil
T	Coated Coils							Nominal Width for Gas Furnace
								A = Fits 14" Furnace Cabinet
								B = Fits 17-1/2" Furnace Cabinet
								C = Fits 21" Furnace Cabinet
								D = Fits 24-1/2" Furnace Cabinet
								N = Does Not Apply (Horizontal Slab Coils
Cabinet Finish								Nominal Capacity @ 13 SEER
U	Unpainted							1824 =	1-1/2 - 2 Tons
P	Painted							3030 =	2-1/2 Tons
N	Unpainted Case							3131 =	2-1/2 Tons
								3636 =	3	Tons
Expansion Device								3642 =	3	- 3-1/2 Tons
F	Flowrator							3743 =	3	- 3-1/2 Tons
T	Factory-Installed Non-Adjustable							4860 =	4	- 5 Tons
	Expansion Valve							4961 =	4	- 5 Tons

6

PRODUCT IDENTIFICATION

	MB R		8	00	A	A	1
	1,2	3	4	5,6	7	8	9
Brand							Electrical
MB - Modular Blower							1: 208-230V/60Hz/1 PH
							Design Series
Type							A: First Series
R -	Speed
E -	Variable Speed
							Circuit Breaker
Airflow							A: No Circuit Breaker
8:	800 CFM					B:	Circuit Breaker
12:	1200 CFM
16:	1500 CFM						Factory Heat
20:	2000 CFM						00 No Heat

7

PRODUCT IDENTIFICATION

	A W U F				3642	1	6	AA
	1	2	3	4	5,6,7,8	9	10	11,12
Brand									Engineering*
A	Airhandler								Major/Minor Revisions
Unit Application									Refrigerant Charge
C	Ceiling Mount PSC Motor								4 = R-410a
D	Downflow PSC Motor
E	Multi Position								Electrical
	Variable Speed								1 208/240V, 1 Phase, 60 Hz
R	Multi Position PSC Motor
S	Multi Position EEM Motor
T	Coated Coils								Nominal Capacity
W	Wall Mount PSC/EEM Motor							@ 13 SEER Dedicated Application
								3636	= 3 Ton
							Multi-Position & Downflow Application
Cabinet Finish								1830	= 1-1/2 - 3-1/2 Tons
U	Unpainted							3137	= 3 Tons
P	Painted							3642	= 3 - 3-1/2Tons
N	Uncased					Multi-Position & Downflow Application @10 SEER
								1729	= 3 Ton

Expansion Device			Ceing Mount & Wall Mount Applications
F	Flowrator	(Nominal Cooling Capacity/Electric Heat kW)
T	Expansion Valve	1803 =	1-1/2 Tons Cooling/3 kW Electric Heat
		1805 = 1-1/2 Tons Cooling/5 kW Electric Heat
		2405 = 2 Tons Cooling/5 kW Electric Heat
		3608 = 3 Tons Cooling/8 kW Electric Heat
		3105 =	1-1/2 - 2-1/2 Tons Cooling/5 kW Electric Heat
		3210 =	2	- 2-1/2 Tons Cooling/5 kW Electric Heat
		3705 =	3	Tons Cooling/5 kW Electric Heat
		3708 =	3	Tons Cooling/8 kW Electric Heat
		3710 =	3	Tons Cooling/10 kW Electric Heat
			An "F" in the model number denotes a
			Factory Installed Float Switch is present.

All Airhandlers use DIRECT DRIVE MOTORS. Power supply is AC 208-240v, 60 hz, 1 phase.

8

PRODUCT IDENTIFICATION

	A R U F				18 B 1			4 AA
	1	2	3	4	5,6	7	8	9	10,11
Brand										Engineering*
A	Single-Piece								Major/Minor Revisions
	Airhandler
Unit Application									Refrigerant Charge
C	Ceiling Mount PSC Motor									4 = R-410a
R	Multi Position PSC Motor
S	Multi Position EEM Motor									Electrical
W	Wall Mount PSC/EEM Motor								1 208/240V, 1 Phase, 60 Hz
Cabinet Finish										Cabinet Width
U	Unpainted								B =	17- 1/2" Wide
P	Painted								C =	21" Wide
N	Uncased								D =	24 -1/2" Wide

Expansion Device						Nominal Capacity @ 13SEER
F	Flowrator	18 =		1-1/2 Tons		39	= 2-1/2 - 3 Tons
T	Expansion Valve	24 =		2	Tons	42	= 3-1/2 Tons
		25	=	2	Tons	47	= 3-1/2 Tons
		29	=	2-1/2 - 3 Tons		48	= 4 Tons
		30	=	2-1/2 Tons		49	= 4 Tons
		33	=	1	1/2 - 2 Tons	59	= 5 Tons
		36 = 3			Tons	60	= 5 Tons
		37 = 2-1/2 - 3 Tons				61	= 5 Tons

Airhandlers use DIRECT DRIVE MOTORS. Power supply is AC 208-230v, 60 hz, 1 phase.

9

PRODUCT IDENTIFICATION							LIGHT COMMERCIAL
	G S X 11				090	1	AA
	1	2	3	4,5	6,7,8	9	10,11
Brand								Engineering
G -	Goodman brand							Major/Minor Revisions
A -	Amana brand
Type								Voltage
S	Split System						1	- 208/230V Single-Phase 60 Hz
							2	- 220/240V Single-Phase 50 Hz
Type							3	- 208/230V Three-Phase 60 Hz
X:	Condenser R-410A						4	- 460V Three-Phase 60 Hz
Z:	Heat Pump R-410A						5	- 380/415V Three-Phase 50 Hz
SEER
11 - 11 SEER
13 - 13 SEER
14 - 14 SEER								Nominal Capacity
16 - 16 SEER							036	- 3 Tons
							048	- 4 Tons
							060	- 5 Tons
							090	- 7-1/2 Tons
							120	- 10 Tons

	A R 090 AA
	1	2	3,4,5	6,7
Brand				Engineering
A	Single Piece			Major/Minor Revisions
	Air Handler

Unit Application	Nominal Capacity
R Multi Position	090 7-1/2 Tons
PSC Motor	120 10 Tons

For use with GSX/GSZ11 Light Commercial models only.

10

PRODUCT IDENTIFICATION				LIGHT COMMERCIAL
			GSX11 LIGHT COMMERCIAL
	GOODMAN® BRAND SPLIT X-R410A CONDENSERS 11 SEER
Model/Rev				Description
GSX11090*AA			Introduction of Goodman Light Commercial 11 SEER, R-410A Condensers.
GSX11120*AA
GSX111203AB			208-230V and 460V 3 Phase condensing units with new ball valve/brackets, suction
GSX110903AB
GSX111204AB			tube/assembly and panel w/offset.
GSX110904AB
			GSZ11 LIGHT COMMERCIAL
			GOODMAN SPLIT Z-R410A HEAT PUMP 11 SEER
Model/Rev				Description
GSZ11090*AA			Introduction of Goodman Light Commercial 11 SEER, R-410A Heat Pumps.
GSZ11120*AA
GSZ110903AB
GSZ111203AB			208-230V and 460V 3 Phase R410A heat pump units with new ball valve/brackets, suction
GSZ110904AB			tube/assembly and panel w/offset.
GSZ111204AB
			AR LIGHT COMMERCIAL
			A SINGLE PIECE R-MULTI-POSITION PSC MOTOR
Model/Rev				Description
AR0904A			Introducation of new 7.5 & 10 Ton Air Handler Models, for use with GSX11 and GSZ11
AR1204A			Light Commercial Models.

11

PRODUCT IDENTIFICATION			Split System Heat Pumps
		ASZ13
		AMANA® BRAND SPLIT Z-R410A HEAT PUMP 13 SEER
	Model/Rev	Description
	ASZ130**1AA	Initial release of Amana® Brand 13 SEER Heat Pump R410A.
	ASZ130**1AB	Introduces new revisions with improved circuiting for effective defrost.
	ASZ130[18, 36-60]1AB	Introduces models containing crankcase heater, CCH switch and upgraded defrost
	ASZ130[24-30]1AC	control.
	ASZ130[18, 36-60]1AC	Relocation of low pressure switch from liquid line to suction line as a compressor
	ASZ130[24-30]1AD	safeguard to prevent low pressure from entering.
	ASZ130[18, 36-60]1AD	Initial release of models using single speed PSC motors; removal of low ambient
	ASZ130[24-30]1AE	temperature switch.
	ASZ130241BA	Release of 2 Ton models, converting from 3/8" to 5mm condenser coils
	ASZ130181AF	Current reversing valve change from Dunan to new SanHua reversing valve
	ASZ130[24-30]1AG
	ASZ130481AF	Current Ranco reversing valve 0151M00020 replaced by SanHua 0151R00070 reversing
		valve
	ASZ130361AG	Change from copper wound motor to aluminum wound motor.
	ASZ130421AH
	ASZ130481AG	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	ASZ130601AF
	ASZ130181AG	Replaced motor 0131M000266 with 0131M00811
	ASZ130[24,30]1AH
	ASZ130421AJ	Change from copper wound compressor motor to aluminum wound compressor motor.
		ZP34K5EPFV130 and ZP36K5EPFV130.

12

PRODUCT IDENTIFICATION			Split System Heat Pumps
		ASZ14
	AMANA® BRAND SPLIT Z-R410A HEAT PUMP 14 SEER
Model/Rev			Description
ASZ140**1AA		Initial release of Amana® Brand 14 SEER Heat Pump R410A with sound blankets and
		Coresense control.
ASZ140**1AB		Screw locations moved in the top panel, base pans, louvers, and control box covers.
ASZ140**1AC		Horizontal style louvers.
ASZ140[18, 42-48]1AD		New steel muffler, and suction tubes w/shock loop.
ASZ140[24-36, 60]1AE
ASZ140361AF
ASZ140421AD		TXV & compensator replaced with flowrator & accumulator.
ASZ140[48-60]1AE
ASZ140[18, 30,36]1AF
ASZ140241AG		Sanhua (RANCO) reversing valves.
ASZ14[42, 48, 60]1AE
ASZ140241AF		Smaller B1227315 reversing valve.
ASZ140[18,30,36]1AG		Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
ASZ140241AH
		control.
ASZC160[42,48,60]1AF
ASZ140361BA		Chassis size reduction from large to medium.
ASZ140[18, 30]1AH		Relocation of low pressure switch from liquid line to suction line as a compressor
ASZ140241AJ
		safeguard to prevent low pressure from entering.
ASZ140[42-60]1AG
ASZ140[18, 30]1AJ
ASZ140241AK		2 speed PSC motors replaced with single speed PSC motors.
ASZ140[42-60]1AH
ASZ140361BB
ASZ140181AL
ASZ140241AM
ASZ140301AL		Revision made for design improvement.
ASZ140361BC
ASZ140381AB
ASZ140[42-60]1AK

*ASZ14 CONTINUED ON THE NEXT PAGE

13

PRODUCT IDENTIFICATION			Split System Heat Pumps
		ASZ14
	AMANA® BRAND SPLIT Z-R410A HEAT PUMP 14 SEER
Model/Rev			Description
ASZ140381AA		35" chassis with 6-channel flowrator and ZP29K5 compressor.
ASZ140[18-30]1BA		Updated ratings and agency information.
ASZ140[18-60]1KA		Introduction of ready 15, 14 SEER heat pumps to meet the 2015 energy efficiency
		requirement.
ASZ140[42,49]1KB		Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
ASZ140181KC		Change from copper wound motor to aluminum wound motor.
ASZ140[24,30,36,48,60]1KB		Refrigerant Charge Reduction
ASZ140[42,49]1 KC
ASZ140181KD		Refrigerant Charge Reduction
ASZ140[24,30,36]1KC		Equivalent motor with Aluminum Windings replacing Copper Windings.
ASZ140[48,60]1KC		Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807

14

PRODUCT IDENTIFICATION				Split System Heat Pumps
			ASZ16
		AMANA® BRAND SPLITS Z-R410A HEAT PUMP 16 SEER
	Model/Rev			Description
	ASZ160**1AA		Initial release of Amana® Brand 16 SEER Heat Pump R410A.
	ASZ160**1AB		Introduces models with screw locations moved in the top panel, base pans, louvers, and
			control box covers.
	ASZ160**1AC		Horizontal style louvers.
	ASZ160**1AD		Muffler and standardized TXV, Compensator using the ASZ18 Seer weldment.
	ASZ160241AD		Adds new steel muffler, and suction tubes w/shock loop.
	ASZ160[36-60]AE
	ASZ160[24,36]1AF		Sanhua (RANCO) reversing valves.
	ASZ160[48,60]1AF
	ASZ160[24,36,48,60]1KA		Initial release of Amana® Brand 16 SEER Heat Pump models
	ASZ160[18-48]1LA		Initial release of Amana® Brand 16 SEER Heat Pump models with 9.6+ HSPF
	ASZ160601LA		Initial release of Amana® Brand 5 Ton 16 SEER, 13 eer Heat Pump models.
	ASZ160[24,30]1LB		Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
	ASZ160181LB		16SEER 1.5T Heat Pumps, Remove Hard Start Kit
	ASZ160181LC		Change from copper wound motor to aluminum wound motor.
	ASZ160[36,48]1LB		Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	ASZ160421LB		Replaced motor 0131M00018P with 0131M00813
			ASZ18
		AMANA® BRAND SPLIT Z-R410A HEAT PUMP 18 SEER
	Model/Rev			Description
	ASZ180**1AB		Initial release of Amana® Brand 18 SEER Heat Pump R410A.
	ASZ180[36,48,60]1AC		Sanhua (RANCO) reversing valves.

15

PRODUCT IDENTIFICATION Split System Heat Pumps

ANZ13

AMANA® BRAND SPLIT SYSTEM N-BASE Z-R410A HEAT PUMP 13 SEER

Model/Rev	Description
ANZ130[18-60]1AA	Initial release of Amana® Brand Split System Base Heat Pump, 13 Seer R-410A units.
ANZ130[18/24/30]1AB	Reversing valve change from Dunan to new SanHua reversing valve
ANZ130481AB	Ranco 0151M00020 reversing valve changed to new SanHua 0151R00070 reversing valve
ANZ130241AC	Create new Motor & Replace 0131M00294 with 0131M00800
ANZ130601AB	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
ANZ130[18,30]1AC	Replaced motor 0131M000266 with 0131M00811
ANZ130[36,42,48]1AC	Replaced motor 0131M00018P with 0131M00813
ANZ130421AD	Change from copper wound compressor motor to aluminum wound compressor motor.
ANZ130421AE	ZP34K5EPFV130 and ZP36K5EPFV130.

ANZ14

AMANA® BRAND SPLIT SYSTEM N-BASE Z-R410A HEAT PUMP 14 SEER

	Model/Rev	Description
	ANZ140(18-60)1AA	Introduction of ready 15, 14 SEER heat pumps to meet the 2015 energy efficiency
		requirement.
	ANZ140(24-30)1AB	Energy guide update.
	ANZ140181AB	Minor revisions on OD units ZP14K6 compressors without hard start kit.
		14S 1.5T HPs ONLY.
	ANZ140421AB	Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
	ANZ140491AB
	ANZ140[18,30]1AC	Change from copper wound motor to aluminum wound motor.
	ANZ140361AB
	ANZ140[42,49]1AC	Refrigerant Charge Reduction
	ANZ140[48,60]1AB
	ANZ140[18,30]1AD	Refrigerant Charge Reduction
	ANZ140361AC
	ANZ140241AD	Equivalent motor with Aluminum Windings replacing Copper Windings.
	ANZ140[48,60]1AC	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807

16

PRODUCT IDENTIFICATION		Split System Heat Pumps
	DSZ16
	DELUXE SPLIT Z-R410A HEAT PUMP 16 SEER
Model/Rev		Description
DSZ160**1AA	Initial release of Deluxe Goodman 2-stage 16 SEER heat pumps with R-410A.
DSZ160241AC	Sanhua (RANCO) reversing valves.
DSZ16036, 48, 60]1AB
	DSZ18
	DELUXE SPLIT Z-R410A HEAT PUMP 18 SEER
Model/Rev		Description
DSZ180**1AA	Initial release of Deluxe Goodman 2-stage 18 SEER heat pumps with R-410A.
DSZ180[36, 48, 60]1AB	Sanhua (RANCO) reversing valves.

17

PRODUCT IDENTIFICATION			Split System Heat Pumps
		VSZ13
		VALUE SPLIT Z-R410A HEAT PUMP 13 SEER
	Model/Rev	Description
	VSZ13**1AA	Initial release of Value Line 13 SEER heat pumps with R-410A.
	VSZ130[24 & 30]1AB	Improved circuiting for effective defrost.
	VSZ130[24 & 36]1BA	Initial release of models with 5mm Smart Coil™.
	VSZ130[18, 42, 48]1AB
	VSZ130241BB	Models containing crankcase heater, CCH switch and upgraded defrost control.
	VSZ130301AC
	VSZ130[24 & 36]1BC
	VSZ130301AE	Release of single phase models with new 6 pole motor.
	VSZ130[18, 42 & 48]1AD
	VSZ130[18, 42-60]1AC	Relocation of low pressure switch from liquid line to suction line as a compressor
	VSZ130301AD	safeguard to prevent low pressure from entering.
	VSZ130241CA	Release of 2 Ton models with a compressor change from ZP21K5EPFV130 to
		ZP20K5EPFV130.
	VSZ130181AE	Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
	VSZ130421AF	post on 26" and 29" chassis.
	VSZ130361BD	Single phase models with new 6 pole motor.
	VSZ130301AF	Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
	VSZ130481AE	post on 26" and 29" chassis.
	VSZ130421AF	Compressor change from ZP36K5EPFV130 to ZP34K5EPFV130.
	VSZ130241CB	2 Ton models changing from the current four piece louver assembly, to a two piece louver
		plus a corner post on Goodman and value series 26" and 29" chassis.
	VSZ130181AF
	VSZ130241BD	Reversing valve change from Dunan to new SanHua.
	VSZ130301AG
	VSZ130481AF	Ranco 0151M00020 reversing valve replaced by SanHua 0151R00070 reversing valve
	VSZ130241BE	Create new Motor & Replace 0131M00294 with 0131M00800
	VSZ130601AD	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807

18

	PRODUCT IDENTIFICATION		Split System Heat Pumps
		VSZ14
		VALUE SPLIT Z-R410A HEAT PUMP 14 SEER
	Model/Rev		Description
	VSZ14[018-060]1AA	Introduction of ready 15, 14 SEER heat pumps to meet the 2015 efficiency requirement.
	VSZ140(18-30)1AB	Energy guide update. PCBDM160 with new software.
	VSZ140421AB	Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
	VSZ140491AB
	VSZ140[18,30]1AC	Refrigerant charge reduction.
	VSZ140[36,48,60]1AB
	VSZ140[18, 30]1AD	Change from copper wound motor to aluminum wound motor.
	VSZ140361AC
	VSZ140[24, 42, 49]1AC	Refrigerant Charge Reduction
	VSZ140241AD	Equivalent motor with Aluminum Windings replacing Copper Windings.
	VSZ140[48,60]1AC	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	VSZ140[18,24,30]1AF	GMC product for outdoor splits is changing the paint color to match the new paint for
	VSZ140[36,42,48,49,60]1AE	GMC indoor furnaces being released.
	VSZ140181BA	Convert VSZ 14 SEER 1.5 Ton HP from Copeland to Rechi Compressor

19

PRODUCT IDENTIFICATION

Split System Heat Pumps

		GSZ13
		GOODMAN SPLIT Z-R410A HEAT PUMP 13 SEER
	Model/Rev	Description
	GSZ13**1AA	Initial release with Regal Beloit motor.
	GSZ13**1AB
	GSZ13**3AA	Initial release with Broad Ocean motor.
	GSZ13**4AA
	GSZ130[24 & 30]1AC	Release of minor revision with improved circuiting for effective defrost.
	GSZ130[24 & 36]1BA	Initial release of models with 5mm Smart Coil™.
	GSZ130241CA	Release of 2 Ton models with a compressor change from ZP21K5EPFV130 to
		ZP20K5EPFV130.
	GSZ130241CB	2 Ton models changing from the current four piece louver assembly, to a two piece louver
		plus a corner post on Goodman and value series 26" and 29" chassis.
	GSZ130[18, 42-60]1AC
	GSZ130301AD	Release of models containing crankcase heater, CCH switch and upgraded defrost control.
	GSZ130361BB
	GSZ130[18,42,48,60]1AD
	GSZ130301AE	Relocation of low pressure switch from liquid line to suction line as a compressor safeguard
	GSZ130[36,48,60{3,4]AB	to prevent low pressure from entering.
	GSZ130[48,60{3,4]AB
	GSZ130[18,42,48]1AF	Changing from the current four piece louver assembly, to a two piece louver plus a corner
	GSZ130301AG
		post on Goodman and value series 26" and 29" chassis.
	GSZ130[36,48]3AD
	GSZ130484AC
	GSZ130361BC	Release of models with new 6 pole motor/fan combination.
	GSZ130[42,48]1AE
		Models with new 6 pole motor/fan combination. Changing from the current four piece louver
	GSZ130361BD	assembly, to a two piece louver plus a corner post on Goodman and value series 26" and
		29" chassis.
	GSZ130421AF	Release of two piece louver plus corner post on 26" and 29" chassis with compressor
		changing from ZP36K5EPFV130 to ZP34K5EPFV130.
	GSZ130[36, 48]3AC	Release of 3 phase models with new 6 pole motor.
	GSZ14**1AA	Initial release of 14 SEER models.
	GSZ130481AG
	GSZ130483AE	Replaced Ranco reversing valve 0151M00020 with SanHua 0151R00070 reversing valve .
	GSZ130484AD

*GSZ13 CONTINUED ON THE NEXT PAGE

20

PRODUCT IDENTIFICATION		Split System Heat Pumps
	GSZ13
	GOODMAN SPLIT Z-R410A HEAT PUMP 13 SEER
Model/Rev	Description
GSZ130[19,31]1AD
GSZ130241BE	Create new Motor & Replace 0131M00294 with 0131M00800
GSZ130251AC
GSZ130601AE	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
GSZ130181AH	Replaced motor 0131M000266 with 0131M00811
GSZ130301AJ
GSZ130361BF
GSZ130371AD	Replaced motor 0131M00018P with 0131M00813
GSZ130421AJ
GSZ130481AH
GSZ130421AK	Change from copper wound compressor motor to aluminum wound compressor motor.
GSZ130421AL	ZP34K5EPFV130 and ZP36K5EPFV130.

21

PRODUCT IDENTIFICATION

Split System Heat Pumps

		GSZ14
		GOODMAN SPLIT Z-R410A HEAT PUMP 14 SEER
	Model/Rev	Description
	GSZ140(18-60)1KA	Introduction of ready 15 14 SEER heat pumps to meet the 2015 energy efficiency
	GSZ140491AA	requirement.
	GSZ140(18-30)1KB	Energy guide update. PCBDM160 with new software.
	GSZ140301KC	Migrating from copper to aluminum motors.
	GSZ140361KB
	GSZ140[42,49]1KB	Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
	GSZ140181KC	Refrigerant charge reduction.
	GSZ140361KC
	GSZ140[24,30]1KD	New model revisions, GSZ140241KD, GSZ140301KD, GSZ140481KB and GSZ140601KB
	GSZ140[48,60]1KB	will have the BOMs changed and have a lower refrigerant charge.
	GSZ140[24,30]1KE	New model revisions to deplete current overstock of Ranco reversing valves
	GSZ140[48,60]1KC
	GSZ140181KD	Change from copper wound motor to aluminum wound motor.
	GSZ140[42,49]1KC	Refrigerant Charge Reduction
	GSZ140241KF	Equivalent motor with Aluminum Windings replacing Copper Windings.
	GSZ140371AB	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	GSZ140[48,60]1KD
		GSZ16
		GOODMAN SPLIT Z-R410A HEAT PUMP 16 SEER
	Model/Rev	Description
	GSZ160[18-48]1BA	Initial release of Goodman 16 SEER, 13 EER Heat Pumps with 9.0+ HSPF
	GSZ1160601BA	Initial release of Goodman 5 Ton 16 SEER, 13 EER Heat Pumps
	GSZ160241BB	Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
	GSZ160301BB
	GSZ160181BB	16 SEER 1.5T Heat Pumps, Remove Hard Start Kit
	GSZ160181BC	Equivalent motor with Aluminum Windings replacing Copper Windings.
	GSZ160181BD	Switching current Goodman 16SEER condensers and heat pumps with grille tops to louver
	GSZ160[24,30]1BC
		tops to be consistent with other Goodman units having louver-style top panels.
	GSZ160[36,42,48,60]1BB
	GSZ160[36,48]1BC	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	GSZ160421BC	Replaced motor 0131M00018P with 0131M00813

22

PRODUCT IDENTIFICATION

Split System Heat Pumps

		SSZ14
	SPECIAL HIGH FEATURE SPLIT Z-R410A HEAT PUMP 14 SEER
	Model/Rev	Description
	SSZ140**1AA	Initial release of Goodman 14 SEER Heat Pump R410A.
	SSZ140**1AB	Screw locations moved in the top panel, base pans, louvers, and control box covers.
	SSZ140**1AC	Broad Ocean Motors.
	SSZ140181AC
	SSZ140241AF	Discharge line mufflers added.
	SSZ140301AD
	SSZ140361AF	Added discharge line mufflers. Replaced TXV and compensator with flowrator and
	SSZ140[42-60]1AD	accumulator.
	SSZ140241AG	Smaller B1227315 reversing valve.
	SSZ140[18, 30, 42-60]AE
	SSZ140241AH	Sanhua (RANCO) reversing valves.
	SSZ140361AG
	SSZ140[18, 30, 42-60]AF	Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
	SSZ140241AJ
		control.
	SSZ140361AH
	SSZ140[18,30]1AH	Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
	SSZ140241AL
		post on Goodman 26" and 29" chassis.
	SSZ140361BB
	SSZ140140[18, 30]1AJ
	SSZ140[19, 25]1AC
	SSZ140[31, 37]1AC
	SSZ140241AM	Revision made for design improvement.
	SSZ140361BCC
	SSZ140381AB
	SSZ140140381AB
	SSZ140[42-60]AH
	SSZ140[18-60]1AD	Relocation of low pressure switch from liquid line to suction line as a compressor
		safeguard to prevent low pressure from entering.
	SSZ140361AF	Chassis size reduction from large to medium.
	SSZ140[42-60]1AD
	SSZ140381AA	Initial release of 35" chassis with 6-channel flowrator and ZP29K5 compressor.
	SSZ140[18-30]1BA	Updated ratings and agency information.
	SSZ140241BB	Change from copper wound motor to aluminum wound motor.
	SSZ140251AE
	SSZ140361BE
	SSZ140371AE	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	SSZ140[42,48,60]1AK

23

PRODUCT IDENTIFICATION			Split System Heat Pumps
		SSZ16
	SPECIAL HIGH FEATURE SPLIT Z-R410A HEAT PUMP 16 SEER
Model/Rev		Description
SSZ160**1AA		Initial release of Goodman 16 SEER Heat Pump R410A.
SSZ160**1AB		Screw locations moved in the top panel, base pans, louvers, and control box covers.
SSZ160**1AC		Broad Ocean Motor. Updated muffler and standardized TXV. Compensator using ASZ18
		SEER weldment to the SSZ160601AC.
SSZ16[024-48]1AC		Discharge line mufflers added.
SSZ160601AD
SSZ160361AF		Added discharge line mufflers. Replaced TXV and compensator with flowrator and
SSZ160[42-60]1AD		accumulator.
SSZ160241AF
SSZ160[36, 48]1AD		Sanhua (RANCO) reversing valves.
SSZ160601AE
SSZ160241AF		Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
SSZ160[36-48]1AE
		control.
SSZ160601BA
SSZ160241AH		Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
		post on Goodman 26" and 29" chassis.
SSZ160601BB		Ultratech® compressor
SSZ160241AK		Change from copper wound motor to aluminum wound motor.

24

PRODUCT IDENTIFICATION				Split System Condensers
				GSX13
		GOODMAN BRAND SPLIT X-R410A CONDENSERS 13 SEER
	Model/Rev			Description
	GSX130**1AA		Initial release of Goodman 13 SEER R-410A Condensers with Regal Beloit motors
	GSX13061[1/3/4]AA		Introduction of Goodman 13 SEER R-410A Condensers that supplement our current 5 ton
			models.
	GSX130363AB		Changed from the current four piece louver assembly, to a two piece louver plus a corner
	GSX130484AB
	GSX130603AB		post on Goodman and value series 26" and 29" chassis.
	GSX130604AB
	GSX130**1AB		Broad Ocean motors.
	GSX130483AB		3 Phase model with new 6 pole motor.
	GSX130483AC		3 phase model changing from the current four piece louver assembly, to a two piece louver
			plus a corner post on Goodman and value series 26" and 29" chassis.
	GSX130181EA		Introduction of 1.5 ton condenser with Rechi Compressor.
	GSX130181EB
	GSX130**1BA		Introduction of Goodman 13 SEER R-410A Condensers using SmartCoil® coils. Units will
	GSX130**3AA		have new louvers because units are smaller. Piston size change. Other components
	GSX130**4AA		unchanged.
	GSX130301BB		Replaced	fan motor to -294 and fan blade to -18 on GSX130301BA models.
	GSX130[42, 48]1BC		Changed from the current four piece louver assembly, to a two piece louver plus a corner
	GSX130301BC
			post on Goodman and value series 26" and 29" chassis.
	GSX130601BB
	GSX130[42, 48]1BB		New 6 pole motor/fan combination.
	GSX130181CA		Rotary compressor.
	GSX130421CA		Introduction of Goodman 3.5 and 4 ton 13 SEER condensing units with reciprocating
	GSX130481CA		compressor.
	GSX130361CA		Replaced current compressor with compressor ZP29K5EPFV130.
	GSX130[18-36]1DA		Condenser conversion to 23" chassis for the 1.5 - 3 ton models.
			Changed from a 4 leg Rechi Compressor 50N382XV-ZAKM to 3 Leg Rechi Compressor
	GSX130181ED		50N382XV-5AKM. Changed Suction line Assy from 0210R01608 to 0210R01406. This
			minor
	GSX13031DB		Improved coil circuit assembly for greater capacity/efficiency and a new discharge tubing
			assembly.
	GSX130361EA		Introduction of Goodman 3 ton conversion from 29" chassis to 26".
	GSX130361EB		Changed from the current four piece louver assembly, to a two piece louver plus a corner
			post on Goodman and value series 26" and 29" chassis.
	GSX130371AA		Improved decibel ratings for Canadian market.
	GSX130181EF		Change from motor 0131M00276 to 0131M00593 on units GSX130181 & VSX130181
	GSX130363AD		Change from copper wound motor to aluminum wound motor.
	GSX130241EC		Create new Motor & Replace 0131M00294 with 0131M00800
	GSX130301BF

*GSX13 CONTINUED ON THE NEXT PAGE

25

PRODUCT IDENTIFICATION			Split System Condensers
			GSX13
	GOODMAN BRAND SPLIT X-R410A CONDENSERS 13 SEER
Model/Rev			Description
GSX130611AC		Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
GSX130241ED
GSX130[30,60]1BG		Factory Refrigerant Charge Optimization
GSX130361EE
GSX130[42,48]1BF
GSX130181EH		Changing Flat BOM structure to Indented BOM structure
GSX130181EG		Switching 3-legged and 4-legged compressors in 13SEER and 14SEER condensers to
		those with improved overload protection (OLP).
GSX130181EJ		Switching compressor from 50N382XV-5AKM to 50N382YV-5AKM
GSX130301LA		13 SEER 2_5T Condenser Rechi Conversion - Switch from Copeland compressor to Rechi
		compressor in 13 SEER 2.5 ton condensers (GSX, VSX, ANX)
GSX130361EF
GSX130[42,48]1BG		Replaced motor 0131M00018P with 0131M00813
GSX130483AE
GSX130601BH
GSX130421BH		Change from copper wound motor to aluminum wound motor.
GSX130421BJ
GSX130301LB		Change from copper wound motor to aluminum wound motor.

26

PRODUCT IDENTIFICATION			Split System Condensers
		GSX14
	GOODMAN BRAND SPLIT X-R410A CONDENSERS 14 SEER
Model/Rev		Description
GSX14**1AA		Introduction of Goodman 14 SEER R-410A models.
GSX140[18-19]1KA
GSX140[24-25]1KA		Goodman Split X 14 Seer Condensing units. Introducing the Goodman 14 SEER standard
GSX140[30-31]1KA
		condenser 5mm architecture with updated scroll compressors.
GSX140[36-37]1KA
GSX140[42, 48, 60]1KA
GSX140241KB		Replaced 1/12hp fan motor with 1/8hp fan motor.
GSX140311AA		Introduction of 12.2 EER air conditioning units.
GSX140[30-36,42]1KB		Migrating from copper to aluminum motors.
GSX140251LA		Changed compressor from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
		louvers from 24" tall to 29" tall
GSX140241LB		Create minor revisions of the new Rechi 2.0T units to consume the excess inventory of
		19P fan motor
GSX140191KB		Remove HS Kit from Control Panels of condenser units with updated
		ZP14K6E scroll compressors.
GSX140361KC
GSX140371KB		Refrigerant charge reduction.
GSX140421KC
GSX140 [43,48,60]1KB
GSX140311KB
GSX140371KC		Change from copper wound motor to aluminum wound motor.
GSX140431KC
GSX140[48,60]1KC		Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
GSX140301LA		Changing from Copeland to Rechi in 14 SEER 2.5T condenser units: Project involves
		moving to a larger coil, and added accessories for the Rechi application.
GSX140181LB		Switching 3-legged and 4-legged compressors in 13SEER and 14SEER condensers to
		those with improved overload protection (OLP).
GSX140241LD		Charge Optimization for 14 SEER 2T lineup
GSX140[36,42]1KE		Charge Optimization for 14 SEER 3T and 3.5T condenser units
GSX140181LC
GSX140191KC		Replaced motor 0131M000266 with 0131M00811
GSX140251BB
GSX140241LC		Replaced motor 0131M000266 with 0131M00811
		Refrigerant Charge Change
GSX140[37,43]1KD		Charge optimization for Southwest 14 SEER models
GSX140301KC		Reinstatement and new minor revision

27

PRODUCT IDENTIFICATION

Split System Condensers

GSX16

GOODMAN BRAND SPLIT X-R410A CONDENSERS 15 AND 16 SEER

	Model/Rev	Description
	GSX160**1FA	Initial release of the Goodman 16 SEER R410A Condensers.
	GSX160611FA	New high capacity 5 ton model that will supplement the current GSX160601 models.
	GSX160[18-61]1FB	Minor revision for GSX16s to include ball valves 0151R00045 and 0151R00046.
	GSX160601GA	7mm coils.
	GSX160(48/60/61)1FB	Ball valve change from 0151R00046 to 0151R00081
	GSX160(18/24/30/36)1FC	Migrating from copper to aluminum motors.
	GSX160(18/24/30/36)1FC	Ball Valve Re-work 0151R00045 & 0151R00046
	GSX160(42/48/60/61)1FC
	GSX160311AA	Initial release creates and launches 2 new SKUs in the 16 SEER single-stage AC
	GSX160371AA	product line.
	GSX160[24, 30, 60]1FE	Refrigerant charge reduction.
	GSX160[31,37]1AB	Equivalent motor with Aluminum Windings replacing Copper Windings.
	GSX160[18,36,42,48,61]1FE	Switching current Goodman 16SEER condensers and heat pumps with grille tops to
	GSX160[24,30]1FF	louver tops to be consistent with other Goodman units having louver-style top
	GSX160[31,37]1AC	panels.
	GSX160[48,61]1FF	Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
	GSX160421FG	Change from copper wound compressor motor to aluminum wound compressor motor.
	GSX160481FH	ZP34K5EPFV130 and ZP36K5EPFV130.

28

PRODUCT IDENTIFICATION			Split System Condensers
		SSX14
	SPECIAL HIGH FEATURE SPLIT X-R410A CONDENSERS 14 SEER
Model/Rev		Description
SSX140**1AA		Initial release of Goodman 14 SEER AC 410A.
SSX140**1AB		Revisions have screw locations moved in the top panel, base pans, louvers, and control
		box covers.
SSX14018, 241AC		Revised condenser coils by removing [1] haripin.
SSX140301AC		Model contains the Broad Ocean motor 0131M00060
SSX14036-601AC		Models contain the Broad Ocean motor 0131M00061
SSX14030,361AD		Revised condenser coils by removing [1] haripin.
SSX140421AD		Introduces SSX140421A in 29" base pan
SSX140[18-24]1BA		Converts 1.5 - 3.5 ton condenser coil tubes from 3/8" tube diameter to 5mm tube
SSX140[30-36]1BA
		diameter.
SSX140421CA
SSX140[18-36]1BC		Changing from the current four piece louver assembly, to a two piece louver plus a corner
SSX140421CC		post on Goodman and value series 26" and 29" chassis.
SSX140[18-36]1BD
SSX140421CD		Revision made for design improvement.
SSX140481BB
SSX140601AG
SSX140421BA		Revision for SSZ140421B* in 29 base pan and it will the reduce the unit charge from 180
		oz. to 170 oz. and replace the 1/4 hp outdoor unit motor with 1/6 hp motor.
SSX14030-421AE		Revised condenser coils by removing [1] haripin.
SSX140[18-48]1BA		Introduction of Goodman 14 SEER R-410A Condensers with SmartCoil® Coils.
SSX14042-481CA
SSX140[18-36]1BB		Relocation of low pressure switch from liquid line to suction line as a compressor
SSX140421CB
		safeguard to prevent low pressure from entering.
SSX140601AF

29

PRODUCT IDENTIFICATION

Split System Condensers

SSX16

SPECIAL HIGH FEATURE SPLIT X-R410A CONDENSER 16 SEER

	Model/Rev	Description
	SSX160**1AA	Introduces Goodman 16 SEER AC 410A
	SSX160**1AB	New revisions have screw locations moved in the top panel, base pans, louvers, and
		control box covers.
	SSX160**1AB	New revisions have screw locations moved in the top panel, base pans, louvers, and
	SSX160591AA	control box covers.
	SSX160[24, 36, 48]1BA	SmartCoil® coils.
	SSX160[30 & 42]1AA
	SSX160[24, 36]1BC	Changing from the current four piece louver assembly, to a two piece louver plus a corner
	SSX160[30, 42]1AB	post on Goodman and value series 26" and 29" chassis.
	SSX160601BA	ZPS49K compressor.
	SSX160[24,36,60]1BB	Relocation of low pressure switch from liquid line to suction line as a compressor
		safeguard to prevent low pressure from entering.

	DSX16
	DELUXE SPLIT X-R410A HEAT PUMP 16 SEER
Model/Rev	Description
DSX160**1AA	Initial release of Goodman 2-stage, 16 SEER condensing units with R-410A.
DSX160[24, 36]1BA	Conversion of 2 & 3 ton models to SmartCoil® Coils.
DSX160241BC	Introduces Ultratech® 2.0 compressor changes.

	DSX18
	DELUXE SPLIT X-R410A HEAT PUMP 18 SEER
Model/Rev	Description
DSXC18**1AA	Intial release of 2-stage condensing units with R-410A communicating models.
DSXC18036AB
DSXC18048AB	Updated wiring diagram with notes for communicating condensing units.
DSXC18060AB
	Replaced existing compressor ZPS20K4EPFV230 to ZPS20K5EPFV130 & existing
DSXC18036AC	compressor ZPS30K4EPFV230 to ZPS30K5EPFV130 for communicating condensing
	units.
DSXC180[48-60]AC	Intial release of Ultratech 2.0 to communicating condensing units

30