Z370 AORUS ULTRA GAMING WIFI
Z370 AORUS ULTRA GAMING 2.0
User's Manual
Rev. 1001
12ME-Z37AUWO-1001R
Z370 AORUS ULTRA |
Z370 AORUS ULTRA |
GAMING WIFI |
GAMING 2.0 |
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
Declaration of Conformity
We, Manufacturer/Importer,
G.B.T. Technology Trading GMbH
Address: Bullenkoppel 16, 22047 Hamburg, Germany
Declare that the product
Product Type: Motherboard
Product Name: Z370 AORUS ULTRA GAMING WIFI
Z370 AORUS ULTRA GAMING 2.0 conforms with the essential requirements of the following directives:
EMC Directive 2014/30/EU:
Conduction & Radiated Emissions: |
EN 55022:2010/AC2011 |
Immunity: |
EN 55024:2010 |
Power-line harmonics: |
EN 61000-3-2:2006+A2:2009 |
Power-line flicker: |
EN 61000-3-3:2013 |
Low voltage Directive 2014/35/EU:
Safety: |
EN60950-1:2006+A11:2009+A12:2011+A1:2010+ |
AC:2011+A2:2013
EN 62368-1:2014
Radio Equipment Directive 2014/53/EU:
Technical Requirements: |
EN 300 328 v2.1.1, |
|
EN 301 893 v1.8.1 & v2.1.1 (Rx blocking) |
|
EN 301 489-1 v2.2.0 (draft), EN 301 489-17 v3.2.0 |
|
(draft) |
|
EN 300 440-2 v1.4.1, EN300 440 v2.1.1 |
|
(Rx blocking) |
RoHS Directive 2011/65/EU
Restriction of use of certain |
This product does not contain any of the restricted |
substances in electronic equipment: substances listed in Annex II, in concentrations and applications banned by the directive.
CE marking
|
|
Signature: |
Timmy Huang |
(Stamp) |
Date: Apr. 20, 2018 |
Name: |
Timmy Huang |
Wireless Module Country Approvals:
See the latest safety and regulatory documents at GIGABYTE's website.
Motherboard
Z370 AORUS ULTRA GAMING WIFI
Z370 AORUS ULTRA GAMING 2.0
Apr. 20, 2018
Copyright
© 2018 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutpriornotice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
For quick set-up of the product, read the Quick Installation Guide included with the product.In order to assist in the use of this product, carefully read the User's Manual.
For product-related information, check on our website at: http://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.
Example:
Table of Contents
Z370 AORUS ULTRA GAMING WIFI Motherboard Layout.............................................. |
5 |
|
Z370 AORUS ULTRA GAMING 2.0 Motherboard Layout................................................ |
6 |
|
Chapter 1 Hardware Installation...................................................................................... |
7 |
|
1-1 |
Installation Precautions..................................................................................... |
7 |
1-2 |
Product Specifications...................................................................................... |
8 |
1-3 |
Installing the CPU........................................................................................... |
12 |
1-4 |
Installing the Memory...................................................................................... |
12 |
1-5 Installing an Expansion Card.......................................................................... |
13 |
|
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Configuration............................... |
13 |
|
1-7 |
Back Panel Connectors.................................................................................. |
14 |
1-8 |
Internal Connectors........................................................................................ |
16 |
Chapter 2 BIOS Setup................................................................................................... |
25 |
|
2-1 |
Startup Screen................................................................................................ |
25 |
2-2 |
M.I.T................................................................................................................ |
26 |
2-3 |
System............................................................................................................ |
32 |
2-4 |
BIOS............................................................................................................... |
33 |
2-5 |
Peripherals...................................................................................................... |
36 |
2-6 |
Chipset............................................................................................................ |
39 |
2-7 |
Power.............................................................................................................. |
40 |
2-8 |
Save & Exit..................................................................................................... |
42 |
Chapter 3 Appendix....................................................................................................... |
43 |
|
3-1 Configuring a RAID Set.................................................................................. |
43 |
|
3-2 Installing an Intel® Optane™ Memory.............................................................. |
45 |
|
3-3 |
Drivers Installation.......................................................................................... |
47 |
Regulatory Statements.............................................................................................. |
48 |
|
Contact Us................................................................................................................. |
52 |
- 4 -
KB_MS_USB30 |
|
ATX_12V_2X4 |
|
SYS_FAN1 |
CPU_FAN |
||
|
|||
|
|
M2_WIFI |
CPU_OPT |
|
TYPEC USB31 |
ASMedia® |
|
|
|
LGA1151 |
|
USB 3.1 Gen 2 |
|
|
|
|
HDMI |
Controller |
|
|
|
|
|
|
|
|
|
|
R_USB30 |
|
|
|
|
|
USB_LAN |
|
|
|
|
|
AUDIO |
|
|
|
|
_32G |
|
110 |
80 |
60 |
42 |
M2Q |
|
|
||||
|
PCIEX1_1 |
Z370 AORUS ULTRA GAMING WIFI |
|||
Intel® GbE |
|
|
|
|
|
LAN |
PCIEX16 |
|
DLED V SW2 |
C2 D LED2 |
PUMP |
LED |
SYS FAN3_ |
|
ATX |
|
F USB30 |
F USB30C |
DDR4 4 DDR4 2 DDR4 3 DDR4 1 |
|
iTE® |
PCIEX1_2 |
|
|
Super I/O |
80 |
60 |
42 |
|
PCIEX8 |
|
|
CODEC |
|
|
|
|
PCIEX1_3 |
|
|
|
PCIEX4 |
|
|
F_AUDIO |
|
|
DLED_V_SW1 |
|
|
|
SPDIF_O LED_C1
D_LED1
|
|
|
THB_C |
|
32G |
Intel® Z370 |
|
|
|
|
|
1 0 |
|
|
M2A |
|
|
SATA3 |
|
|
|
|
3 2 |
|
M_BIOS |
|
|
|
|
BAT |
|
|
|
|
|
B_BIOS |
|
4 |
|
|
|
SATA3 5 |
|
|
|
CLR_CMOS |
|
|
|
TPM F_USB2 F_USB1 |
SYS_FAN2A |
F_PANEL |
CPU |
DRAM |
SYS_FAN2B |
|
VGA |
BOOT |
|
|
|
|
Box Contents
55 |
Z370 AORUS ULTRA GAMING WIFI motherboard |
55 |
Four SATA cables |
55 |
Motherboard driver disk |
55 |
I/O Shield |
55 |
User's Manual |
55 |
One G Connector |
55 |
Quick Installation Guide |
55 |
One Wi-Fi antenna |
*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.
-5 -
KB_MS_USB30 |
|
ATX_12V_2X4 |
|
SYS_FAN1 |
CPU_FAN |
||
|
|||
|
|
||
|
|
CPU_OPT |
TYPEC USB31 |
ASMedia® |
|
|
|
LGA1151 |
|
USB 3.1 Gen 2 |
|
|
|
|
HDMI |
Controller |
|
|
|
|
|
|
|
|
|
|
R_USB30 |
|
|
|
|
|
USB_LAN |
|
|
|
|
|
AUDIO |
|
|
|
|
_32G |
|
110 |
80 |
60 |
42 |
M2Q |
|
|
||||
|
PCIEX1_1 |
Z370 AORUS ULTRA GAMING 2.0 |
|||
Intel® GbE |
|
|
|
|
|
LAN |
PCIEX16 |
|
DLED V SW2 |
C2 D LED2 |
PUMP |
LED |
SYS FAN3_ |
|
ATX |
|
F USB30 |
F USB30C |
DDR4 4 DDR4 2 DDR4 3 DDR4 1 |
|
iTE® |
PCIEX1_2 |
|
|
Super I/O |
80 |
60 |
42 |
|
PCIEX8 |
|
|
CODEC |
|
|
|
|
PCIEX1_3 |
|
|
|
PCIEX4 |
|
|
F_AUDIO |
|
|
DLED_V_SW1 |
|
|
|
SPDIF_O LED_C1
D_LED1
|
|
|
THB_C |
|
32G |
Intel® Z370 |
|
|
|
|
|
1 0 |
|
|
M2A |
|
|
SATA3 |
|
|
|
|
3 2 |
|
M_BIOS |
|
|
|
|
BAT |
|
|
|
|
|
B_BIOS |
|
4 |
|
|
|
SATA3 5 |
|
|
|
CLR_CMOS |
|
|
|
TPM F_USB2 F_USB1 |
SYS_FAN2A |
F_PANEL |
CPU |
DRAM |
SYS_FAN2B |
|
VGA |
BOOT |
|
|
|
|
Box Contents
55 |
Z370 AORUS ULTRA GAMING 2.0 motherboard |
55 |
Four SATA cables |
55 |
Motherboard driver disk |
55 |
I/O Shield |
55 |
User's Manual |
55 |
One G Connector |
55 |
Quick Installation Guide |
|
|
*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.
-6 -
The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures:
•• Prior to installation, make sure the chassis is suitable for the motherboard.
•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation.
•• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.
•• When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely.
•• When handling the motherboard, avoid touching any metal leads or connectors.
•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity.
•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container.
•• Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off.
•• Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard.
•• Before using the product, please verify that all cables and power connectors of your hardware components are connected.
•• To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components.
•• Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing.
•• Do not place the computer system on an uneven surface.
•• Do not place the computer system in a high-temperature or wet environment.
•• Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user.
•• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions.
- 7 -
1-2 |
Product Specifications |
|
|
|
|
|
CPU |
Support for 8th Generation Intel® Core™ i7 processors/Intel® Core™ i5 processors/ |
|
|
Intel® Core™ i3 processors in the LGA1151 package |
|
|
(Go to GIGABYTE's website for the latest CPU support list.) |
|
|
L3 cache varies with CPU |
|
Chipset |
Intel® Z370 Express Chipset |
|
Memory |
4 x DDR4 DIMM sockets supporting up to 64 GB of system memory |
|
|
Dual channel memory architecture |
|
|
Support for DDR4 2666/2400/2133 MHz memory modules |
|
|
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in |
|
|
non-ECC mode) |
|
|
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
|
Support for Extreme Memory Profile (XMP) memory modules |
|
|
(Go to GIGABYTE's website for the latest supported memory speeds and memory |
|
|
modules.) |
|
Onboard |
Integrated Graphics Processor-Intel® HD Graphics support: |
|
Graphics |
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz |
|
|
* Support for HDMI 1.4 version and HDCP 2.2. |
|
Maximum shared memory of 1 GB |
|
Audio |
|
Realtek® ALC1220 codec |
|
High Definition Audio |
|
|
|
2/4/5.1/7.1-channel |
|
Support for S/PDIF Out |
|
LAN |
|
Intel® GbE LAN chip (10/100/1000 Mbit) |
Wireless |
|
Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band |
Communication |
|
BLUETOOTH 4.2, 4.1, BLE, 4.0, 3.0, 2.1+EDR |
Module (Note) |
|
Support for 11ac wireless standard and up to 867 Mbps data rate |
|
|
* Actual data rate may vary depending on environment and equipment. |
Expansion Slots |
|
1 x PCI Express x16 slot, running at x16 (PCIEX16) |
|
|
* For optimum performance, if only one PCI Express graphics card is to be installed, |
|
|
be sure to install it in the PCIEX16 slot. |
|
1 x PCI Express x16 slot, running at x8 (PCIEX8) |
|
|
|
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is |
|
|
populated, the PCIEX16 slot operates at up to x8 mode. |
|
1 x PCI Express x16 slot, running at x4 (PCIEX4) |
|
|
|
* The PCIEX4 slot shares bandwidth with the PCIEX1_2 and PCIEX1_3 slots. When |
|
|
the PCIEX1_2 or PCIEX1_3 slot is populated, the PCIEX4 slot operates at up to x1 |
|
|
mode. |
|
3 x PCI Express x1 slots |
|
|
|
(All of the PCI Express slots conform to PCI Express 3.0 standard.) |
Multi-Graphics |
|
Support for NVIDIA® Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ technologies |
Technology |
|
Support for AMD Quad-GPU CrossFire™ and 3-Way/2-Way AMD CrossFire™ |
technologies
(Note) Only for Z370 AORUS ULTRA GAMING WIFI. - 8 -
Storage Interface |
|
Chipset: |
|
|
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/ |
|
|
x2 SSD support) (M2Q_32G) |
|
|
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe |
|
|
x4/x2 SSD support) (M2A_32G) |
|
|
- 32 GB Intel® Optane™ Memory pre-installed (M2Q_32G) |
|
|
- 6 x SATA 6Gb/s connectors |
|
|
- Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
|
|
* Refer to "1-8 Internal Connectors," for the installation notices for the M.2 and SATA |
|
|
connectors. |
|
|
Intel® Optane™ Memory Ready |
USB |
|
Chipset+ASMedia® USB 3.1 Gen 2 Controller: |
|
|
- 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support |
|
|
- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel |
|
|
Chipset: |
|
|
- 1 x USB Type-C™ port with USB 3.1 Gen 1 support, available through the |
|
|
internal USB header |
|
|
- 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through |
|
|
the internal USB header) |
|
|
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through |
|
|
the internal USB headers) |
Internal |
|
1 x 24-pin ATX main power connector |
Connectors |
|
1 x 8-pin ATX 12V power connector |
|
|
1 x CPU fan header |
|
|
1 x water cooling CPU fan header |
|
|
3 x system fan headers |
|
|
1 x system fan/water cooling pump header |
|
|
2 x digital LED strip headers |
|
|
2 x digital LED strip power select jumpers |
|
|
2 x RGB (RGBW) LED strip headers |
|
|
6 x SATA 6Gb/s connectors |
|
|
2 x M.2 Socket 3 connectors |
|
|
1 x front panel header |
|
|
1 x front panel audio header |
|
|
1 x S/PDIF Out header |
|
|
1 x USB Type-C™ port, with USB 3.1 Gen 1 support |
|
|
1 x USB 3.1 Gen 1 header |
|
|
2 x USB 2.0/1.1 headers |
|
|
1 x Thunderbolt™ add-in card connector |
|
|
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S |
|
|
module only) |
|
|
1 x Clear CMOS jumper |
- 9 -
Back Panel |
|
1 x PS/2 keyboard/mouse port |
|
Connectors |
|
2 x SMA antenna connectors (2T2R) (Note) |
|
|
1 x USB Type-C™ port, with USB 3.1 Gen 2 support |
||
|
1 x USB 3.1 Gen 2 Type-A port (red) |
||
|
1 x HDMI port |
||
|
4 x USB 3.1 Gen 1 ports |
||
|
2 x USB 2.0/1.1 ports |
||
|
1 x RJ-45 port |
||
|
1 x optical S/PDIF Out connector |
||
|
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, |
||
|
|
Line Out, Mic In) |
|
I/O Controller |
|
iTE® I/O Controller Chip |
|
Hardware |
|
Voltage detection |
|
Monitor |
|
Temperature detection |
|
|
Fan speed detection |
||
|
Water cooling flow rate detection |
||
|
|
Overheating warning |
|
|
Fan fail warning |
||
|
Fan speed control |
||
|
|
|
* Whether the fan (pump) speed control function is supported will depend on the fan |
|
|
|
(pump) you install. |
BIOS |
|
2 x 128 Mbit flash |
|
|
Use of licensed AMI UEFI BIOS |
||
|
Support for DualBIOS™ |
||
|
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
||
Unique Features |
|
Support for APP Center |
|
|
|
|
* Available applications in APP Center may vary by motherboard model. Supported |
|
|
|
functionsofeachapplicationmayalsovarydependingonmotherboardspecifications. |
|
|
- |
3D OSD |
|
|
- |
@BIOS |
|
|
- |
AutoGreen |
|
|
- |
BIOS Setup |
|
|
- |
Color Temperature |
|
|
- |
Cloud Station |
|
|
- |
EasyTune |
|
|
- |
Easy RAID |
|
|
- |
Fast Boot |
|
|
- |
Game Boost |
|
|
- |
ON/OFF Charge |
|
|
- |
Platform Power Management |
|
|
- |
RGB Fusion |
(Note) Only for Z370 AORUS ULTRA GAMING WIFI.
- 10 -
Unique Features |
|
- |
Smart Backup |
|
|
|
- |
Smart Keyboard |
|
|
|
- |
Smart TimeLock |
|
|
|
- |
Smart HUD |
|
|
|
- |
System Information Viewer |
|
|
|
- |
USB Blocker |
|
|
|
- |
USB DAC-UP 2 |
|
|
|
- |
V-Tuner |
|
|
|
Support for Q-Flash |
||
|
Support for Xpress Install |
|||
Bundled |
|
Norton® Internet Security (OEM version) |
||
Software |
|
cFosSpeed |
||
Operating |
Support for Windows 10 64-bit |
|||
System |
||||
|
|
|
||
Form Factor |
|
ATX Form Factor; 30.5cm x 24.4cm |
*GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.
Z370 AORUS ULTRA |
Z370 AORUS ULTRA |
GAMING WIFI |
GAMING 2.0 |
Please visit GIGABYTE's website for support lists of CPU, memory modules, SSDs, and M.2 devices.
Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of apps.
- 11 -
1-3 |
Installing the CPU |
|
|
Read the following guidelines before you begin to install the CPU: |
|
|
•• |
Make sure that the motherboard supports the CPU. |
|
|
(Go to GIGABYTE's website for the latest CPU support list.) |
|
•• |
Always turn off the computer and unplug the power cord from the power outlet before installing the |
|
•• |
CPU to prevent hardware damage. |
|
Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may |
|
|
•• |
locate the notches on both sides of the CPU and alignment keys on the CPU socket.) |
|
Apply an even and thin layer of thermal grease on the surface of the CPU. |
|
|
•• |
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage |
|
•• |
of the CPU may occur. |
|
Set the CPU host frequency in accordance with the CPU specifications. It is not recommended |
|
|
|
that the system bus frequency be set beyond hardware specifications since it does not meet the |
|
|
standard requirements for the peripherals. If you wish to set the frequency beyond the standard |
|
|
specifications, please do so according to your hardware specifications including the CPU, graphics |
|
|
card, memory, hard drive, etc. |
Installing the CPU
Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1151 CPU Socket |
|
|
LGA1151 CPU |
Alignment Key |
Alignment Key |
Notch |
Notch |
Pin One Corner of the CPU Socket |
Triangle Pin One Marking on the CPU |
Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load plate automatically during the process of re-engaging the lever after you insert the CPU.
Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
Please visit GIGABYTE's website for details on hardware installation.
- 12 -
The four memory sockets are divided into two channels and each channel has two memory sockets as following:
Channel A: DDR4_2, DDR4_4Channel B: DDR4_1, DDR4_3
Dual Channel Memory Configurations Table
|
DDR4_4 |
DDR4_2 |
DDR4_3 |
DDR4_1 |
2 Modules |
- - |
DS/SS |
- - |
DS/SS |
|
DS/SS |
- - |
DS/SS |
- - |
4 Modules |
DS/SS |
DS/SS |
DS/SS |
DS/SS |
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1.Dual Channel mode cannot be enabled if only one memory module is installed.
2.When enabling Dual Channel mode with two or four memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used.
Read the following guidelines before you begin to install an expansion card:
•• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
•• Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.
A.System Requirements
-- Windows 10 64-bit operating system
-- A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver -- CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver
(For the latest GPUs that support the 3-way CrossFire technology, please refer to the AMD website.) (Note 1) -- CrossFire (Note 2)/SLI bridge connectors
-- A power supply with sufficient power is recommended (Refer to the manual of your graphics cards for the power requirement)
B.Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire/SLI graphics cards on the PCI
Express x16 slots. (To set up a 2-Way configuration, we recommend installing the graphics cards on the
PCIEX16 and PCIEX8 slots.) Step 2:
Insert the CrossFire (Note 2)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards. Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
C. Configuring the Graphics Card Driver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating system, go to the AMD RADEON SETTINGS screen. Browse to Gaming\Global Settings and ensure AMD CrossFire is set to On.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating system, go to the NVIDIA Control Panel. Browse to the
Configure SLI, Surround, Physx screen and ensure Maximize 3D performance is enabled.
(Note 1) When using dual core graphics cards, only 2-way is supported.
(Note 2) The bridge connector(s) may be needed or not depending on your graphics cards.
Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and driver version. Refer to the manual that came with your graphics cards for more information about enabling CrossFire/SLI technology.
- 13 -
(Note)
PS/2 Keyboard/Mouse Port
Use this port to connect a PS/2 mouse or keyboard.
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. You can connect a USB DAC to this port or use this port for USB devices.
SMA Antenna Connectors (2T2R) (Note)
Use this connector to connect an antenna.
Tighten the antenna cables to the antenna connectors and then move the antenna to a place
where the signal is good.
USB 3.1 Gen 2 Type-A Port (Red)
The USB 3.1 Gen 2 Type-Aport supports the USB 3.1 Gen 2 specification and is compatible to the USB 3.1 Gen 1 and USB 2.0 specification. Use this port for USB devices.
USB Type-C™ Port
The reversible USB port supports the USB 3.1 Gen 2 specification and is compatible to the USB 3.1 Gen 1 and USB 2.0 specification. Use this port for USB devices.
HDMI Port
The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master Audio
formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The item name may differ depending on your operating system.)
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.
Connection/ |
|
|
|
|
|
|
Connection/Speed LED: |
|
Activity LED: |
|
|||||
Speed LED |
|
|
|
Activity LED |
|
|
|||||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
State |
Description |
|
State |
Description |
|
|
|
|
|
|
|
|
|
|
|
Orange |
1 Gbps data rate |
|
Blinking |
Data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
Green |
100 Mbps data rate |
|
On |
No data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
Off |
10 Mbps data rate |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
LAN Port |
|
|
|
||||||||||
|
|
|
|
|
|
|
|||||||||
(Note) |
Only for Z370 AORUS ULTRA GAMING WIFI. |
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 14 - |
|
|
|
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
Center/Subwoofer Speaker Out (Orange)
Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.
Rear Speaker Out (Black)
This jack can be used to connect rear speakers in a 4/5.1/7.1-channel audio configuration.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio. Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out (Green)
The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended that you connect your headphone/speaker to this jack (actual effects may vary by the device being used). Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In (Pink)
The Mic in jack.
•• To enable or configure the audio amplifying function for the Line out jack, please access the HD
Audio Manager application.
•• If you want to install a Side Speaker, you need to retask either the Line in or Mic in jack to be Side Speaker out using the HD Audio Manager application.
•• Please visit GIGABYTE's website for more audio software information.
•• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
- 15 -
1-8 |
Internal Connectors |
|
|
|
|
|
|
|
|
|
4 |
1 |
|
|
|
6 |
3 |
|
9 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
15 |
|
11 |
|
|
|
|
|
|
|
16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19 |
|
|
|
|
|
|
|
|
|
10 |
|
11 |
|
|
|
|
|
|
|
|
|
21 |
|
|
|
|
|
|
|
10 |
|
14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13 |
8 |
7 |
9 |
18 |
17 |
4 |
12 20 |
22 |
1) |
ATX_12V_2X4 |
|
|
|
|
12) |
F_PANEL |
|
|
2) |
ATX |
|
|
|
|
13) |
F_AUDIO |
|
|
3) |
CPU_FAN |
|
|
|
|
14) |
SPDIF_O |
|
|
4) |
SYS_FAN1/2A/2B |
|
|
|
|
15) |
F_USB30C |
|
|
5) |
SYS_FAN3_PUMP |
|
|
|
|
16) |
F_USB30 |
|
|
6) |
CPU_OPT |
|
|
|
|
17) |
F_USB1/F_USB2 |
||
7) |
LED_C1/LED_C2 |
|
|
|
|
18) |
TPM |
|
|
8) |
D_LED1/D_LED2 |
|
|
|
|
19) |
THB_C |
|
|
9) |
DLED_V_SW1/DLED_V_SW2 |
|
|
|
|
20) |
CLR_CMOS |
||
10) |
SATA3 0/1/2/3/4/5 |
|
|
|
|
21) |
BAT |
|
|
11) |
M2Q_32G/M2A_32G |
|
|
|
|
22) |
CPU/DRAM/VGA/BOOT |
Read the following guidelines before connecting external devices:
•• First make sure your devices are compliant with the connectors you wish to connect.
•• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.
•• After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard.
- 16 -