Loading...
J4005N D2P
User's Manual
Rev. 1001
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
Motherboard
J4005N D2P
Motherboard
J4005N D2P
Feb. 14, 2018
Feb. 14, 2018
Copyright
© 2018 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutpriornotice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
In order to assist in the use of this product, carefully read the User's Manual.
For product-related information, check on our website at: http://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.
Example:
Table of Contents
J4005N D2P Motherboard Layout.................................................................................... |
4 |
|
Chapter 1 Hardware Installation...................................................................................... |
5 |
|
1-1 |
Installation Precautions..................................................................................... |
5 |
1-2 |
Product Specifications...................................................................................... |
6 |
1-3 |
Installing the Memory........................................................................................ |
8 |
1-4 Installing an Expansion Card............................................................................ |
8 |
|
1-5 |
Back Panel Connectors.................................................................................... |
8 |
1-6 |
Internal Connectors........................................................................................ |
10 |
Chapter 2 BIOS Setup................................................................................................... |
16 |
|
2-1 |
Startup Screen................................................................................................ |
16 |
2-2 |
Main................................................................................................................ |
17 |
2-3 |
Advanced........................................................................................................ |
18 |
2-4 |
Security........................................................................................................... |
22 |
2-5 |
Boot................................................................................................................ |
23 |
2-6 |
Save & Exit..................................................................................................... |
25 |
Chapter 3 Appendix....................................................................................................... |
26 |
|
Drivers Installation..................................................................................................... |
26 |
|
Regulatory Statements.............................................................................................. |
27 |
|
Contact Us................................................................................................................. |
30 |
|
- 3 -
J4005N D2P Motherboard Layout
SYS_FAN1
DDR4_1
COMA
LPT
VGA
R_USB30
HDMI20
USB30_LAN
AUDIO
ATX_12V
J4005N D2P |
ATX |
CNVI WIFI-BRACKET
Realtek® |
|
|
|
|
GbE LAN |
SOC_FAN |
Intel® Gemini Lake J4005 |
|
|
|
|
|
||
|
BAT |
|
|
M2I 10G |
|
|
F_USB2 |
M_BIOS |
|
|
iTE® Super |
SATA3 |
||
|
|
|
||
AUDIO |
I/O |
0 1 |
F_USB1 |
|
COMB |
|
TPM |
|
|
F |
PCIEX1 |
|
|
|
|
|
|
|
|
CODEC
F_PANEL
DDR4_2
CLR_CMOS
Box Contents
55 |
J4005N D2P motherboard |
|
|
55 |
Motherboard driver disk |
55 |
Two SATA cables |
55 |
User's Manual |
55 |
I/O Shield |
*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.
-4 -
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures:
•• Prior to installation, make sure the chassis is suitable for the motherboard.
•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation.
•• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.
•• When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely.
•• When handling the motherboard, avoid touching any metal leads or connectors.
•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity.
•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container.
•• Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off.
•• Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard.
•• Before using the product, please verify that all cables and power connectors of your hardware components are connected.
•• To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components.
•• Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing.
•• Do not place the computer system on an uneven surface.
•• Do not place the computer system in a high-temperature or wet environment.
•• Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user.
•• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions.
- 5 -
1-2 |
Product Specifications |
||
|
|
|
|
|
CPU |
|
Built in with an Intel® Dual-Core Celeron® J4005 SoC (2.7 GHz) |
|
|
|
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage |
|
|
|
to these components. |
|
|
|
4 MB Cache |
|
Memory |
|
2 x DDR4 DIMM sockets supporting up to 16 GB of system memory |
|
|
Dual channel memory architecture |
|
|
|
Support for DDR4 2400/2133 MHz memory modules |
|
|
|
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in |
|
|
|
|
non-ECC mode) |
|
|
Support for Extreme Memory Profile (XMP) memory modules |
|
|
|
|
(Go to GIGABYTE's website for the latest supported memory speeds and memory |
|
|
|
modules.) |
|
Onboard |
|
Integrated in the SoC: |
|
Graphics |
|
- 1 x D-Sub port, supporting a maximum resolution of 1920x1080@60 Hz |
-1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
*Support for HDMI 2.0 version and HDCP 2.2.
Audio |
|
Realtek® ALC887 codec |
|
High Definition Audio |
|
|
|
2/4/5.1/7.1-channel |
*To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN |
|
Realtek® GbE LAN chip (10/100/1000 Mbit) |
Expansion Slots |
|
1 x PCI Express x16 slot, running at x1 |
|
|
(The PCIEX16 slot conforms to PCI Express 2.0 standard.) |
|
|
1 x M.2 Socket 1 connector for the wireless communication module (CNVI |
|
|
WIFI-BRACKET) |
Storage Interface |
|
Integrated in the SoC: |
|
|
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe |
|
|
x2 SSD support) |
|
|
- 2 x SATA 6Gb/s connectors |
USB |
|
Integrated in the SoC: |
|
|
- 4 x USB 3.1 Gen 1 ports on the back panel |
|
|
- 4 x USB 2.0/1.1 ports available through the internal USB header |
Internal
Connectors
1 x 24-pin ATX main power connector1 x 4-pin ATX 12V power connector2 x SATA 6Gb/s connectors
1 x CPU fan header1 x system fan header
1 x M.2 Socket 3 connector1 x front panel header
1 x front panel audio header2 x USB 2.0/1.1 headers
1 x serial port header
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
1 x Clear CMOS jumper
- 6 -
Back Panel
Connectors
1 x parallel port1 x serial port1 x D-Sub port1 x HDMI port
4 x USB 3.1 Gen 1 ports1 x RJ-45 port
3 x audio jacks
I/O Controller |
iTE® I/O Controller Chip |
Hardware
Monitor
Voltage detection
Temperature detectionFan speed detectionFan speed control
*Whether the fan speed control function is supported will depend on the cooler you install.
BIOS |
|
1 x 128 Mbit flash |
|
Use of licensed AMI UEFI BIOS |
|
|
|
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features Support for Xpress InstallSupport for @BIOS
Support for APP Center
*Available applications in APP Center may vary by motherboard model. Supported functionsofeachapplicationmayalsovarydependingonmotherboardspecifications.
Bundled |
Norton® Internet Security (OEM version) |
|
Software |
cFosSpeed |
|
Operating |
Support for Windows 10 64-bit |
|
System |
||
|
||
Form Factor |
Mini-ITX Form Factor; 17.0cm x 17.0cm |
*GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.
Please visit GIGABYTE's website for support lists of memory modules.
Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of apps.
- 7 -
Please visit GIGABYTE's website for details on hardware installation.
1-3 Installing the Memory
Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
The two memory sockets are divided into two channels and each channel has one memory socket as following:
Channel A: DDR4_1Channel B: DDR4_2
Due to SoC limitations, read the following guidelines before installing the memory in Dual Channel mode.
1.Dual Channel mode cannot be enabled if only one memory module is installed.
2.When enabling Dual Channel mode with two memory modules, it is recommended that memory of the same capacity, brand, speed, and chips be used for optimum performance.
1-4 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
•• Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.
1-5 Back Panel Connectors
Parallel Port
Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called a printer port.
Serial Port
Use the serial port to connect devices such as a mouse, modem or other peripherals.
D-Sub Port
The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz (the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub connection to this port.
USB 3.1 Gen 1 Port
The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices.
- 8 -
HDMI Port
The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution
is 4096x2160@60 Hz, but the actual resolutions supported are dependent on the monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The item name may differ depending on your operating system.)
Dual-Display Configurations for the Onboard Graphics:
Dual-display configurations are supported after you install motherboard drivers in OS.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.
Connection/ |
|
|
|
|
|
|
|
|
Connection/Speed LED: |
|
Activity LED: |
|
||||||||
Speed LED |
|
|
|
Activity LED |
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
State |
Description |
|
State |
|
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange |
1 Gbps data rate |
|
Blinking |
|
Data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Green |
100 Mbps data rate |
|
Off |
|
No data transmission or receiving is occurring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
10 Mbps data rate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
LAN Port |
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||
Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack |
Headphone/ |
4-channel |
6-channel |
8-channel |
|
2-channel |
|||||
|
|
|
|
||
Line In/Rear Speaker Out |
|
a |
a |
a |
|
|
|
|
|
|
|
Line Out/Front Speaker Out |
a |
a |
a |
a |
|
|
|
|
|
|
|
Mic In/Center/Subwoofer Speaker Out |
|
|
a |
a |
|
|
|
|
|
|
|
Front Panel Line Out/Side Speaker Out |
|
|
|
a |
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
•• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
- 9 -
Loading...