Gigabyte B365 M Aorus elite operation manual

5 (2)

B365 M AORUS ELITE

User's Manual

Rev. 1001

12ME-B365MAE-1001R

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.

Gigabyte B365 M Aorus elite operation manual

Motherboard

B365 M AORUS ELITE

Motherboard

B365 M AORUS ELITE

Jan. 28, 2019

Jan. 28, 2019

Copyright

© 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutpriornotice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.

Example:

Table of Contents

B365 M AORUS ELITE Motherboard Layout...................................................................

4

Chapter 1 Hardware Installation......................................................................................

5

1-1

Installation Precautions.....................................................................................

5

1-2

Product Specifications......................................................................................

6

1-3

Installing the CPU.............................................................................................

9

1-4

Installing the Memory........................................................................................

9

1-5 Installing an Expansion Card..........................................................................

10

1-6

Back Panel Connectors..................................................................................

10

1-7

Internal Connectors........................................................................................

13

Chapter 2 BIOS Setup...................................................................................................

21

2-1

Startup Screen................................................................................................

21

2-2

The Main Menu...............................................................................................

22

2-3

M.I.T................................................................................................................

23

2-4

System............................................................................................................

29

2-5

BIOS...............................................................................................................

30

2-6

Peripherals......................................................................................................

33

2-7

Chipset............................................................................................................

36

2-8

Power..............................................................................................................

37

2-9

Save & Exit.....................................................................................................

39

Chapter 3 Appendix.......................................................................................................

40

3-1 Configuring a RAID Set..................................................................................

40

3-2 Installing an Intel® OptaneMemory..............................................................

42

3-3

Drivers Installation..........................................................................................

44

Regulatory Statements..............................................................................................

45

Contact Us.................................................................................................................

48

- 3 -

B365 M AORUS ELITE Motherboard Layout

KB_MS_USB

 

ATX_12V_2X4

 

 

 

 

 

 

SYS_FAN1

 

DVI

 

 

 

 

DP

HDMI

 

 

 

TYPEC

USB30

 

 

 

USB30_LAN

 

 

 

AUDIO

110

80

 

 

 

 

 

Intel®

GbE

 

 

 

LAN

 

 

 

 

 

 

PCIEX16

 

 

iTE®

80

60

42

 

 

 

 

 

Super I/O

 

PCIEX1

 

 

 

 

 

 

CODEC

 

30

 

PCIEX4

 

 

 

 

 

LGA1151

60 42

 

M2A

WIFI

BAT

M2

 

CPU_FAN

V SW2

D_LED2

 

_

 

 

DLED

ATX

 

 

ELITE

LED_C2

M AORUS

SYS_FAN2

B365

1 3

 

0 2

 

SATA3

M2Q

_USB30

 

F

DDR4_4 DDR4_2 DDR4_3 DDR4_1

B_BIOS M_BIOS

Intel® B365

5 4

 

SATA3

CLR_CMOS

 

 

 

 

 

 

D_

 

LED1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F_AUDIO

 

COM

 

 

TPM

 

F_USB1

SYS_FAN3 F_PANEL

 

 

SPDIF_O DLED_V_SW1 LED

_C1

 

 

F_

USB2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CPU

DRAM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA

BOOT

Box Contents

55

B365 M AORUS ELITE motherboard

55

Two SATA cables

55

Motherboard driver disk

55

I/O Shield

55

User's Manual

 

 

*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.

-4 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures:

• Prior to installation, make sure the chassis is suitable for the motherboard.

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity.

• Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container.

• Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing.

• Do not place the computer system on an uneven surface.

• Do not place the computer system in a high-temperature or wet environment.

• Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.

• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions.

- 5 -

1-2

Product Specifications

 

 

 

 

CPU

Support for 9th and 8th Generation Intel® Corei9 processors/Intel® Corei7

 

 

processors/Intel® Corei5 processors/Intel® Corei3 processors/Intel® Pentium®

 

 

processors/Intel® Celeron® processors in the LGA1151 package

 

 

(Go to GIGABYTE's website for the latest CPU support list.)

 

 

L3 cache varies with CPU

 

Chipset

Intel® B365 Express Chipset

 

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

 

 

Dual channel memory architecture

 

 

Support for DDR4 2666/2400/2133 MHz memory modules

 

 

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

 

 

non-ECC mode)

 

 

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

 

 

Support for Extreme Memory Profile (XMP) memory modules

*To support 2666 MHz or XMP memory, you must install a 9th or 8th Generation Intel®

Corei9/i7/i5 processor.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

Onboard

 

Integrated Graphics Processor-Intel® HD Graphics support:

Graphics

 

-

1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

 

 

 

* The DVI-D port does not support D-Sub connection by adapter.

 

 

-

1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

 

 

 

* Support for DisplayPort 1.2 version, HDCP 2.2, and HDR.

 

 

-

1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

 

 

 

* Support for HDMI 1.4 version and HDCP 2.2.

 

Support for up to 3 displays at the same time

 

Maximum shared memory of 1 GB

Audio

 

Realtek® ALC892 codec

 

High Definition Audio

 

 

2/4/5.1/7.1-channel

 

Support for S/PDIF Out

LAN

 

Intel® GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

 

1 x PCI Express x16 slot, running at x16 (PCIEX16)

 

 

 

* For optimum performance, if only one PCI Express graphics card is to be installed,

 

 

 

be sure to install it in the PCIEX16 slot.

 

1 x PCI Express x16 slot, running at x4 (PCIEX4)

 

1 x PCI Express x1 slot

 

 

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

 

1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

Multi-Graphics

 

SupportforAMDQuad-GPUCrossFire and2-WayAMDCrossFire technologies

Technology

 

 

 

- 6 -

Storage Interface

 

Chipset:

 

 

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/

 

 

x2 SSD support) (M2Q)

 

 

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe

 

 

x4/x2 SSD support) (M2A)

 

 

- 6 x SATA 6Gb/s connectors

 

 

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

 

 

* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA

 

 

connectors.

 

 

Intel® OptaneMemory Ready

USB

 

Chipset:

 

 

- 1 x USB Type-C port on the back panel, with USB 3.1 Gen 1 support

 

 

- 5 x USB 3.1 Gen 1 ports (3 ports on the back panel, 2 ports available through

 

 

the internal USB header)

 

 

- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through

 

 

the internal USB headers)

Internal

 

1 x 24-pin ATX main power connector

Connectors

 

1 x 8-pin ATX 12V power connector

 

 

1 x CPU fan header

 

 

3 x system fan headers

 

 

2 x addressable LED strip headers

 

 

2 x addressable LED strip power select jumpers

 

 

2 x RGB LED strip headers

 

 

6 x SATA 6Gb/s connectors

 

 

2 x M.2 Socket 3 connectors

 

 

1 x front panel header

 

 

1 x front panel audio header

 

 

1 x S/PDIF Out header

 

 

1 x USB 3.1 Gen 1 header

 

 

2 x USB 2.0/1.1 headers

 

 

1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S

 

 

module only)

 

 

1 x serial port header

 

 

1 x Clear CMOS jumper

Back Panel

 

1 x PS/2 keyboard/mouse port

Connectors

 

1 x DVI-D port

 

 

1 x DisplayPort

 

 

1 x HDMI port

 

 

1 x USB Type-C port, with USB 3.1 Gen 1 support

 

 

3 x USB 3.1 Gen 1 ports

 

 

2 x USB 2.0/1.1 ports

 

 

1 x RJ-45 port

 

 

6 x audio jacks

I/O Controller

 

iTE® I/O Controller Chip

- 7 -

Hardware

 

Voltage detection

Monitor

 

Temperature detection

 

Fan speed detection

 

 

Overheating warning

 

Fan fail warning

 

Fan speed control

 

 

 

* Whether the fan speed control function is supported will depend on the cooler you

 

 

 

install.

BIOS

 

2 x 128 Mbit flash

 

Use of licensed AMI UEFI BIOS

 

Support for DualBIOS

 

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

 

Support for APP Center

 

 

 

* Available applications in APP Center may vary by motherboard model. Supported

 

 

 

functionsofeachapplicationmayalsovarydependingonmotherboardspecifications.

 

 

-

3D OSD

 

 

-

@BIOS

 

 

-

AutoGreen

 

 

-

Cloud Station

 

 

-

EasyTune

 

 

-

Easy RAID

 

 

-

Fast Boot

 

 

-

Game Boost

 

 

-

ON/OFF Charge

 

 

-

Platform Power Management

 

 

-

RGB Fusion

 

 

-

Smart Backup

 

 

-

Smart Keyboard

 

 

-

Smart TimeLock

 

 

-

Smart HUD

 

 

-

Smart Survey

 

 

-

System Information Viewer

 

 

-

USB Blocker

 

 

Support for Q-Flash

 

Support for Xpress Install

Bundled

 

Norton® Internet Security (OEM version)

Software

 

cFosSpeed

Operating

Support for Windows 10 64-bit

System

 

 

 

Form Factor

 

Micro ATX Form Factor; 24.4cm x 24.4cm

*GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.

Please visit GIGABYTE's website for support lists of CPU, memory modules, SSDs, and M.2 devices.

Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of apps.

- 8 -

1-3

Installing the CPU

 

Read the following guidelines before you begin to install the CPU:

 

••

Make sure that the motherboard supports the CPU.

 

 

(Go to GIGABYTE's website for the latest CPU support list.)

 

••

Always turn off the computer and unplug the power cord from the power outlet before installing the

 

••

CPU to prevent hardware damage.

 

Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

 

••

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

 

Apply an even and thin layer of thermal grease on the surface of the CPU.

 

••

Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

 

••

of the CPU may occur.

 

Set the CPU host frequency in accordance with the CPU specifications. It is not recommended

 

 

that the system bus frequency be set beyond hardware specifications since it does not meet the

 

 

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

 

 

specifications, please do so according to your hardware specifications including the CPU, graphics

 

 

card, memory, hard drive, etc.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

LGA1151 CPU Socket

 

 

LGA1151 CPU

Alignment Key

Alignment Key

Notch

Notch

Pin One Corner of the CPU Socket

Triangle Pin One Marking on the CPU

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load plate automatically during the process of re-engaging the lever after you insert the CPU.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.

•• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.

Dual Channel Memory Configuration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

Please visit GIGABYTE's website for details on hardware installation.

- 9 -

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

Channel A: DDR4_2, DDR4_4Channel B: DDR4_1, DDR4_3

Dual Channel Memory Configurations Table

 

DDR4_4

DDR4_2

DDR4_3

DDR4_1

2 Modules

- -

DS/SS

- -

DS/SS

 

DS/SS

- -

DS/SS

- -

4 Modules

DS/SS

DS/SS

DS/SS

DS/SS

(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1.Dual Channel mode cannot be enabled if only one memory module is installed.

2.WhenenablingDualChannelmode withtwoor fourmemorymodules,it isrecommendedthatmemory of the same capacity, brand, speed, and chips be used.

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.

•• Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.

1-6 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

DVI-D Port (Note)

The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200@60 Hz (the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D connection to this port.

DisplayPort

DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission. DisplayPort can support both DPCP and HDCP 2.2 content protection mechanisms. It provides improved visuals supporting Rec. 2020 (Wide Color Gamut) and High Dynamic Range (HDR) for Blu-ray UHD playback. You can use this port to connect your DisplayPort-supported monitor. Note: The DisplayPort Technology can support a maximum resolution of 4096x2304@60 Hz but the actual resolutions supported depend on the monitor being used.

(Note) The DVI-D port does not support D-Sub connection by adapter.

•• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.

•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.

- 10 -

HDMI Port

The HDMI port supports HDCP2.2 and DolbyTrueHD and DTS HD MasterAudio

formats. It also supports up to 192KHz/16bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.

•• To set up a triple-display configuration, you must install motherboard drivers in the operating system first.

•• After installing the DisplayPort/HDMI device, make sure to set the default sound playback device to DisplayPort/HDMI. (The item name may differ depending on your operating system.)

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices.

USB Type-C Port

The reversible USB port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.

Connection/

 

 

 

Activity LED

Connection/Speed LED:

 

Activity LED:

 

Speed LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

State

Description

 

State

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

Orange

1 Gbps data rate

 

Blinking

Data transmission or receiving is occurring

 

 

 

 

 

 

 

 

 

 

 

 

 

Green

100 Mbps data rate

 

On

No data transmission or receiving is occurring

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

10 Mbps data rate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAN Port

 

 

 

 

 

 

 

 

 

 

 

Center/Subwoofer Speaker Out (Orange)

Use this audio jack to connect center/subwoofer speakers.

Rear Speaker Out (Black)

Use this audio jack to connect rear speakers.

Side Speaker Out (Gray)

Use this audio jack to connect side speakers.

Line In (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out (Green)

The line out jack.

Mic In (Pink)

The Mic in jack.

- 11 -

Audio Jack Configurations:

Jack

Headphone/

4-channel

5.1-channel

7.1-channel

2-channel

 

 

 

 

Center/Subwoofer Speaker Out

 

 

a

a

 

 

 

 

 

Rear Speaker Out

 

a

a

a

 

 

 

 

 

Side Speaker Out

 

 

 

a

 

 

 

 

 

Line In

 

 

 

 

 

 

 

 

 

Line Out/Front Speaker Out

a

a

a

a

 

 

 

 

 

Mic In

 

 

 

 

 

 

 

 

 

Please visit GIGABYTE's website for details on configuring the audio software.

- 12 -

1-7 Internal Connectors

4

1

 

 

 

 

 

 

3

 

4 7

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

8

9

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

13

 

 

 

 

 

 

 

 

 

18

11

16

6

5

7

17

15

19

4

12

10

1)

ATX_12V_2X4

11)

F_AUDIO

2)

ATX

12)

F_PANEL

3)

CPU_FAN

13)

SPDIF_O

4)

SYS_FAN1/2/3

14)

F_USB30

5)

D_LED1/D_LED2

15)

F_USB1/F_USB2

6)

DLED_V_SW1/DLED_V_SW2

16)

COM

7)

LED_C1/LED_C2

17)

TPM

8)

SATA3 0/1/2/3/4/5

18)

CLR_CMOS

9)

M2Q/M2A

19)

BAT

10)

CPU/DRAM/VGA/BOOT

 

 

Read the following guidelines before connecting external devices:

•• First make sure your devices are compliant with the connectors you wish to connect.

•• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.

•• After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard.

- 13 -

1/2)ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

Withtheuseofthepowerconnector,thepowersupplycansupplyenoughstablepowertoallthecomponents on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used (500W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system.

 

 

ATX_12V_2X4:

 

 

 

 

Pin No.

Definition

Pin No.

Definition

5

8

1

GND (Only for 2x4-pin 12V)

5

+12V (Only for 2x4-pin 12V)

1

4

2

GND (Only for 2x4-pin 12V)

6

+12V (Only for 2x4-pin 12V)

ATX_12V_2X4

3

GND

7

+12V

4

GND

8

+12V

 

 

 

 

ATX:

 

 

 

12

24

Pin No.

Definition

Pin No.

Definition

 

 

1

3.3V

13

3.3V

 

 

2

3.3V

14

-12V

 

 

3

GND

15

GND

 

 

4

+5V

16

PS_ON (soft On/Off)

 

 

5

GND

17

GND

 

 

6

+5V

18

GND

 

 

7

GND

19

GND

 

 

8

Power Good

20

NC

 

 

9

5VSB (stand by +5V)

21

+5V

 

 

10

+12V

22

+5V

 

 

11

+12V (Only for 2x12-pin

23

+5V (Only for 2x12-pinATX)

1

13

12

ATX)

24

GND(Onlyfor2x12-pinATX)

 

 

3.3V(Onlyfor2x12-pinATX)

ATX

3/4)CPU_FAN/SYS_FAN1/2/3 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

 

 

 

 

 

 

 

 

 

 

 

 

Pin No.

Definition

 

 

 

1

 

 

 

1

 

 

 

 

1

GND

 

 

 

 

 

1

 

 

 

 

2

Voltage Speed Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CPU_FAN

SYS_FAN2

SYS_FAN1/SYS_FAN3

3

Sense

 

 

 

 

 

 

 

 

 

 

 

 

4

PWM Speed Control

•• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang.

•• Thesefanheadersarenotconfigurationjumperblocks.Donotplaceajumpercapontheheaders.

- 14 -

5)D_LED1/D_LED2 (Addressable LED Strip Headers)

The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 2A (12V or 5V) and maximum length of 5m or maximum number of 300 LEDs. There are 12V and 5V addressable LED strips. Be sure to verify the voltage requirements of your addressable LED strip and set the DLED_V_SW1 and DLED_V_SW2 jumpers accordingly.

1

1

D_LED1 D_LED2

Addressable LED

Strip

1

Pin No.

Definition

1

V

2

D

3

G

Connect your addressable LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the digital LED strip header. Incorrect connection may lead to the damage of the LED strip.

6)DLED_V_SW1/DLED_V_SW2 (Addressable LED Strip Power Select Jumpers)

The jumpers allow you to select the supply voltage of the D_LED1 and D_LED2 headers. Be sure to verify the voltage requirements of your addressable LED strip and set the correct voltage with this jumper before connection. Incorrect connection may lead to the damage of the LED strip.

1

1-2: 5V (Default)

1

1-2: 5V (Default)

 

1

2-3: 12V

1

2-3: 12V

 

DLED_V_SW1

DLED_V_SW2

7)LED_C1/LED_C2 (RGB LED Strip Headers)

The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m.

1 LED_C1

1

LED_C2

RGB LED Strip

1

12V

Pin No.

Definition

1

12V

2

G

3

R

4

B

Connect your RGB LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of this header. Incorrect connection may lead to the damage of the LED strip.

For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of

GIGABYTE's website.

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.

- 15 -

Loading...
+ 33 hidden pages