Fire Sensor
Door Holder
Control Panel
Door Closer
12 VDC (or 24 VDC) are the
usual power source use in the
controlpanel.
The control panel activates the
fire alarm when a fire is
detected.
Door Holder
Statement
The door holder is a fail-safe unit energized by a power supply
installed on large-scale building, between fire escape doors. It
releases the armature plate allowing the door closer to close
the door when the fire prevention system detects a fire alarm
or emergency. The " PUSH OFF" button on magnet for instant
release, the door can be opened or closed manually at any
time. Also available in wall flush mount installation and
optional stainless steel box for surface mount model.
GD-900 Series
Input Voltage: 24Vdc/ac (12V
available by special order)
Current Draw: 60mA@24Vdc
(Further notice for 12Vdc input
voltage on special order requirement)
Cutout Switch
Holding Force: Up to 80 lbs
The control panel activates the
fire alarm when a fire is
detected, and cut off the power
source.
The Electromagnet door
holder automatically releases
thearmature plate allowing the
door to close to prevent the fire
(GD-900F Floor Mount)
(SurfaceGD-900WS Mount)
70
GD-900W
Wall Flush Mount (ANSI Size)
With SMB-050 housing
(Optional) for surface mount
installation.
Push-off button
105
103
65
65
Unit: mm
SMB-050
43
55
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright 2008 Gianniindustries, inc. All rights reserved.
DM-CA-GD Ver.D Published on 2008.05.06
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.