Statement
WPB wireless Push Button units which can be applied to distant access control. WPB series is not only convenient for people who do not work in the same location constantly that are able to unlock the door from distance, but also a best choice for the locations which are difficult to set necessity cables.
WPB-900 |
WPB-025JS |
Specifications
Remote Transmitter
1.Power: 12V battery
2.433 KHz transmitting frequency
3.LED indicator: Judge the volume of dry battery at 12V by LED's brightness.
4.Transmitting distance for the antenna: Max. 50 ~ 60 M 5.Embedded modules: Hopping Code IC
6.The Lowest voltage: Not under 6.28V for the battery of remote transmitter
RF Hopping Code Controller
1.Power: DC12~24V
2.Output contact: SPDT rated 3A@12V DC dry contact
3.Buzzer indicator: The receiver will alarm from the internal buzzer as a signal of low-battery which is under DC9.2V.
4.LED indicator: Green LED: Power
Red LED: Receive & input
5.Timer setting: 1, 3, 5, 10 seconds
6.The quantity of saving remote transmitter: 6 pcs
WPB Series
Wireless Push Button
Application
Dimension
40
130
115
130
83 |
62 |
Unit:mm
Remote Transmitter |
Warranty |
The product is warranted against defects in material and workmanship while used in normal service for a period of 1 year from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw Website: gianni.tw
The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.
Copyright 2008 Gianni industries, inc. All rights reserved. DM-CA-WPB Ver. C Published on 2008.07.07
Loading...