Intrusion
Steel Door
Contacts
1078/1076 Series
Overview |
Standard Features |
The Interlogix 1078 Series Steel Door contacts are designed specifically |
• Fly leads and terminal options available |
for use in the steel doors commonly found in commercial building |
• Designed specifically for use in steel doors |
applications. The unique housing design features a rugged unibody |
• Special ribbed sides allow for easy installation |
construction with flexible ribbed sides for quick, secure installation |
• Rugged unibody construction for maximum durability and reliability |
without gluing. The magnet housing isolates the magnet from the |
• Terminal models available for easier installation |
surrounding steel for maximum gap distances, both make and break. |
• Regular, Wide Gap, SPDT, DPDT, and High Security models available |
Over seven models including: Wide Gap, SPDT, DPDT, and Biased for |
• Rare Earth Magnet designed for steel door with top channel available |
High Security applications make the 1078 Series the most widely used |
|
and comprehensive line available. |
|
On available models a terminal connection (T) makes installation easier. |
|
Simply strip the wire, insert it into the terminal block and tighten. The |
|
terminal accepts any wire size from 14 to 22 gauge, and has a unique |
|
one piece design for added strength. |
|
An optional Rare Earth Magnet is available. It is designed for use |
|
in metal entry/exit doors with a channel in the top of the door. The |
|
magnet eliminates the need to cut a mounting hole in the door channel. |
|
The flexible magnet housing can be compressed to accommodate |
|
a variety of channel widths for quick, easy installation. Adhesive is |
|
recommended. |
|
The contact contains a hermetically sealed magnetic reed switch. The |
|
reed shall be potted in the contact housing with a polyurethane based |
|
compound. Contact and magnet housing shall snap-lock into a 3/4" or |
|
1" dia. hole. Housings shall be molded of flame retardant ABS plastic. |
|
Color of housings shall be off-white, gray or mahogany brown. The |
|
magnet shall be made of Alnico V. Rare Earth Magnet shall be made of |
|
neodymium iron boron. |
|
Snap-lock insulation bushing for tight fit and maximum gap in steel. |
|
Both contact and magnet plastic housings are constructed of one piece |
|
of thick-walled ABS plastic for maximum strength and durability. |
|
|
interlogix.com |