JB400DP
GE® 30" Free-Standing Electric Range
Dimensions and Installation Information (in inches)
KW Rating
240V 10.5
208V 7.9
Breaker Size
40 Amps†
†Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.
Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.
Installation information: Before installing, consult installation instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
30-7/8"
All 30" GE gas and electric range backguards are 30-7/8" wide.*
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possible scorching of walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high heat, no-load heating element operation.
*Except these models: JGBS07, JGBS04, JGBP90, all GE Profile free-standing electric and gas ranges
Fits most countertop backsplash applications. Consult Use & Care Manual for detailed installation instructions.
|
30 |
|
2-1/2 |
|
25 |
Acceptable electrical |
2-1/2 |
outlet area |
|
7
14-1/2
29-7/8
A*
25-3/8
47-5/8
7-1/2
On models with baking or warming drawers, electrical outlet must not be in this area.
Dimension from wall to front of closed oven door handle is 27-3/8 on models JB988/968/910/900 and 27-3/4 on models JBP89/84/81.
*A is 46-7/8 on models JBP89/84/81 and 46-1/2 on models JB988/968/910/900
All GE ranges are equipped with |
Listed by |
an Anti-Tip device. The installation |
|
of this device is an important, |
Underwriters |
required step in the installation |
Laboratories |
of the range. |
|
Specification Created 5/09 |
321538 |