®
2x2 Switcher for HDMI® 1.3
EXT-HDMI1.3-242
User Manual
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax |
(818) 772-9120 |
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday PST
Write To:
Gefen, LLC.
c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation without prior written notice.
2x2 Switcher For HDMI 1.3 is a trademark of Gefen, LLC
HDMI, the logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries.
© 2011 Gefen, LLC. All rights reserved.
All trademarks are the property of their respective owners.
Rev B4
CONTENTS
1Introduction
2Operation Notes
3Features
4Panel Layout
5Panel Descriptions
6Connecting And Operating The 2x2 Switcher For HDMI 1.3
7IR Remote Control Description
8IR Remote Installation
9IR Remote Configuration
10IR Channel Configuration
11EDID Management
11Internal EDID
12External EDID
13Specifications
14Warranty
INTRODUCTION
Congratulations on your purchase of the 2x2 Switcher for HDMI 1.3. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen 2x2 Switcher for HDMI 1.3
Gefen’s 2x2 Switcher for HDMI 1.3 is equipped with two HDMI inputs and two HDMI outputs. Two inputs accommodate the simultaneous connection of up to two high definition video sources, such as satellite systems and Blu-Ray players. 3D content can be displayed when connecting a 3DTV and 3D source. Two outputs send the high definition audio/video signals to up to two HDTV displays. Switching is done via the included IR remote.
How It Works
Connect all your sources to the 2x2 Switcher for HDMI 1.3 inputs. Then connect up to two displays on the output ports. Once the sources, the switcher and the displays are powered and connected, you then select which source you want to view using the IR remote.
1
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X2 SWITCHER FOR HDMI 1.3
•By default, display information from the display connected to HDMI output port 1 is sent back to the source. Therefore, the other display connected to the 2x2 Switcher for HDMI 1.3 must be capable of accepting the timings, resolutions and audio formats of the display that is connected to HDMI output port 1. It is recommended that the display with the lowest native resolution be connected to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID programmed into the 2x2 Switcher for HDMI 1.3 that can be used instead. See page 11 for more details.
2
FEATURES
HDMI Features
•225 MHz (up to 12 bit YUV 444 supported @ 1080p)
•Deep Color
•Dolby TrueHD and DTS-HD Master Audio
•Lip-Sync
•CEC Pass-Through
Features
•Easily switch between any two Hi-Def sources on up to two (2) HDTV displays without signal loss
•Maintains sharp HDTV resolutions up to 1080p Full HD and 2K
•3DTV Pass-Through
•Color Space Conversion
•EDID Management for rapid integration of sources and display devices.
•Mono-LOK™ Locking HDMI Connectors
•Supports the use of DVI sources and DVI displays with an HDMI-to-DVI converter cable or adapter
•HDMI and HDCP compliant
Package Includes
(1)Gefen 2x2 Switcher for HDMI 1.3
(2)6 ft. HDMI cables (M-M)
(1) |
IR Remote Control |
(1) |
5V DC Power Supply |
(1) |
User Manual |
3