Gateway CX200, CX2610, CX2600, CX2620, M280 Quick Start Manual

Front

LCD panel release latch

Pen	Speaker	Memory card reader	Speaker
		Headphone jack
		Microphone jack

Left	Monitor port
	Power connector

	Ethernet jack	PC Card slot
		IEEE 1394 port
	Docking port	USB ports

1 Install the battery

With the label side down, slide the battery into the battery compartment until it clicks. Then lock it in place.

3 Connect to the Internet

(optional)

Connect the phone cord (included) to the modem jack ( ) if using dialup Internet access. Or connect your Ethernet ( ) or USB ( ) cable (not included) if using highspeed access.

Back

Right

Modualr bay

2 Connect to AC power

Leave the AC adapter plugged in for at least three hours the first time, so the battery will fully charge.

Battery indicator

Power indicator

Kensington™ lock slot

Ventilation fan	Modem jack
Caution: Do not block

4 Start the Convertible Notebook PC

Make sure that the Lock is in the up postition. Press the power button, then follow the on-screen instructions to complete Windows setup.

© 2005 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.