Size:
438.45 Kb
Download

OWNER’S

MANUAL

COLOR TV/VCR

SC313C

SC319C

(13 inch)

(19 inch)

This Owner’s Manual is made of

 

recycled paper.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

As an ENERGYSTAR®

Partner, our company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.

If you need additional assistance for set-upor operating after reading owner’s manual, please call

TOLL FREE : 1-800-242-7158.

Please read before using this equipment

PORTABLE CART WARNING
S3126A
S3126A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-Allthe safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-Thesafety and operating instructions should be retained for future reference.

3.Heed Warnings-Allwarnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-UnplugTV/VCR from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Donot use attachments not recommended by the TV/VCR manufacturer as they may cause hazards.

7.Water and Moisture-Donot use this TV/VCR near waterfor example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Donot place this TV/VCR on an unstable cart, stand, tripod, bracket, or table. The TV/VCR may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/VCR. Any mounting of the

appliance should follow the manufacturer’s instructions and should use a mounting accessory recom-

mended by the manufacturer. An appliance and cart combination

should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

AMEUBLES- Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant.

Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles

avec précaution. Un arrêt brusque, l’u-

tilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9.Ventilation-Slotsand openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/VCR on a bed, sofa, rug, or other similar surface. This TV/VCR should never be placed near or over a radiator or heat register. This TV/VCR should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-ThisTV/VCR should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/VCRs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/VCR is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

- 2 -

EN

9I03

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECT RICAL CODE

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

L EAD I N

 

 

 

 

 

 

W I R E

 

GROUND

 

C L A M P

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DI SCHARG E UN I T

 

 

 

 

 

 

(NEC SECTION 8 10 -20)

EL ECTRI C

 

 

 

 

 

 

SE RV I CE

 

 

 

 

 

 

EQ U I PMEN T

 

 

 

 

 

 

 

 

 

 

 

 

G RO UNDI NG CO NDUCTORS

 

 

 

 

 

 

(NEC SECTION 8 10 -21)

 

 

 

 

 

G RO UND CL AMPS

NEC - NATI O NAL EL ECTRI CAL CO DE

 

 

POWER SERVI C E G RO UNDI NG

 

 

 

EL EC TR O DE SYSTEM

S2 8 9 8 A

 

 

(NEC ART 2 50 , PART H)

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-Foradded protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR due to lightning andpower-linesurges.

15.Power Lines-Anoutside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Donot overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Neverpush objects of any kind into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR.

18.Servicing-Donot attempt to service this TV/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supplycord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV/VCR.

c.If the TV/VCR has been exposed to rain or water.

d.If the TV/VCR does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation.

e.If the TV/VCR has been dropped or damaged in any way.

f.When the TV/VCR exhibits a distinct change in perfor- mance-thisindicates a need for service.

20.Replacement Parts-Whenreplacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Uponcompletion of any service or repairs to this TV/VCR, ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition.

22.Heat-ThisTV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

- 3 -

EN

9I03

PRECAUTIONS

LOCATION

For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the TV/VCR near strong magnetic fields.

Avoid moving TV/VCR to locations where temperature differences are extreme.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Do not put your fingers or objects into the TV/VCR cassette holder.

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture, it may damage the tape and TV/VCR. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.

FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 4 -

EN

9I03

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6

C OPERATING CONTROLS AND FUNCTIONS 7

C PREPARATION FOR USE . . . . . . . . . . . . . . . .9

ANTENNA/CABLE CONNECTIONS . . . . . . .9 INSTALLING THE BATTERIES . . . . . . . . . . .10 EXTERNAL INPUT MODE . . . . . . . . . . . . . .10

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .

10

CHANNEL SET UP FOR THE FIRST TIME .10 CLOCK SET UP (AUTO / MANUAL) . . . . . .11 CHANNEL SET UP AGAIN . . . . . . . . . . . . . .12 DELETING (OR ADDING) CHANNEL . . . . .12 SELECTING THE LANGUAGE . . . . . . . . . . .13 DAYLIGHT-SAVINGTIME . . . . . . . . . . . . . .13

C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .14

WATCHING A TV PROGRAM . . . . . . . . . . . .14 GAME MODE . . . . . . . . . . . . . . . . . . . . . . . . .14 DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .14 PICTURE CONTROL . . . . . . . . . . . . . . . . . . .14 CLOSED CAPTION SYSTEM . . . . . . . . . . . .15 V-CHIPSET UP . . . . . . . . . . . . . . . . . . . . . . . .15

C PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .17

NORMAL PLAYBACK . . . . . . . . . . . . . . . . . .17 AUTO REPEAT PLAYBACK . . . . . . . . . . . . .17 SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . .18 PICTURE CONTROLS . . . . . . . . . . . . . . . . . .19

C RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .19

NORMAL RECORDING . . . . . . . . . . . . . . . . .20

SKIPPING UNWANTED SCENES DURING RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .20

OTR (One Touch Recording) . . . . . . . . . . . . . .20 TIMER RECORDING . . . . . . . . . . . . . . . . . . .21 TIMER PROGRAM EXTENSION . . . . . . . . .22

HINTS FOR AUTOMATIC TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .23

AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . .23 WAKE UP TIMER . . . . . . . . . . . . . . . . . . . . . .23 SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .24

C COPYING A VIDEO TAPE . . . . . . . . . . . . . . .24

C ON SCREEN DISPLAY . . . . . . . . . . . . . . . . .25

C SPECIAL FEATURES . . . . . . . . . . . . . . . . . .25

REAL TIME TAPE COUNTER . . . . . . . . . . . .25 AUTO REWIND-EJECT . . . . . . . . . . . . . . . . .25

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .25

C TROUBLESHOOTING GUIDE . . . . . . . . . . .26

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .27

C CABLE CHANNEL DESIGNATIONS . . . . . .27

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

INDICE

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . . . .28 CONEXIONES DE ANTENA/CABLE . . . . . . . .30 MODO DE ENTRADA EXTERNA . . . . . . . . . . .30

INSTALACIÓN DE LAS PILAS . . . . . . . . . . . . .30

PREPARACIÓN DE CANALES POR

PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . . . .31 AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . .31

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

- 5 -

EN

9I03

FEATURES

Infrared remote control

Bilingual on screen menu display selectable in English or Spanish

Real time counter–Thisshows the elapsed recording or playback time in hours, minutes, and seconds. The“–”indication will appear when the tape is rewound further than the tape counter position “0:00:00”.

181 channel capability PLL frequency synthesizer tuner with direct station call–(A converter may be necessary to view scrambled cable channels.)

Auto Clock Setting–Allowsyou to set the clock function from a PBS broadcast station.

Closed caption system–Youmay view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Game mode–Automaticallysets external input mode and allows TV/VCR display to be suitable for use with TV games.

Auto power on and off system–Automatically turns on the TV/VCR when you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached.

Auto rewind when the end of a tape is reached–This function doesn’t occur when using timer recording.

2 Step picture search operation–You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed.

Three different playback tape speeds : SP/LP/SLP

Two different recording tape speeds : SP/SLP

Auto Head Cleaner–Automaticallycleans video heads as you insert or remove a cassette.

Zero Return–Thetape returns to counter of 0:00:00 by rewinding or fast forwarding.

Still–“Freeze”the picture at any time, for close viewing of a particular scene. Only tapes recorded in SLP mode will show a fairly clear picture.

Digital Auto Tracking (DTR)–Automatically adjusts the tracking for each tape you play.

Rental play mode–Improvesplayback picture quality from worn tapes, such as rental tapes.

Auto repeat–Allowsyou to repeat the playing of a tape indefinitely without pressing the PLAY button.

Time search–Letyou set the TV/VCR to advance the tape by entering the desired playback time you want to skip.

OTR (One Touch Recording)–Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button.

1 Year, 8 events (including Daily and Weekly Timer Recording)–The built-in timer allows you to record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be made once a week up to the end of the tape.

Auto return–Aftertimer recording is finished, the TV/VCR can return to the beginning of the recording.

Wake up/Sleep timer–Allowsyou to have the TV/VCR automatically turn on or off at a desired time.

Timer Program Extension–Allow you to shift the time schedule for automatic timer recording.

V-CHIP–Enablesparents to prevent their children from watching inappropriate material on TV.

SUPPLIED ACCESSORIES

Remote Control Unit

2 AA Batteries

Rod Antenna (13” model only)

 

 

PART NO. (0EMN00673 or

PART NO. (N0150UD)

 

0EMN01599 or

 

 

0EMN01755)1

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-242-7158.

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter). Contact your local electronics store for these items.

We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- 6 -

EN

9I03

OPERATING CONTROLS AND FUNCTIONS

This manual covers 13" and 19". The operation of the two models are exactly the same except the appearance. 19" model is illustrated in this manual.

NOTE:

We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control.

If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- TV/VCR FRONT PANEL - [Fig.1]

VIDEO AUDIO

POWER VOLUME

CHANNEL

STOP/EJECT REW PLAY F.FWD REC/OTR EARPHONE

1 2

3

4

5

6

7 8 9101112 13

14

- REMOTE CONTROL - [Fig.2]

 

 

 

1

VIDEO input jack– Connect to the video output

 

 

 

 

jack of your video camera or another VCR.

 

 

 

 

 

3

15

16

17

8

7

11

18

19

20

 

 

WAKE-UP

POWER

 

/SLEEP

EJECT

 

 

 

CHANNEL

 

 

 

RETURN

1

2

3

 

4

5

6

 

 

 

 

CHANNEL

7

8

9

 

 

0

+100

 

MENU

DISPLAY

MUTE

VOLUME

 

PLAY

 

REW

 

 

F.FWD

 

STOP

 

RECORD

 

SPEED

PAUSE/STILL

 

T-PROG.

GAME

TIME SEARCH

 

CLEAR

 

 

 

COUNTER

 

 

 

RESET

 

 

2AUDIO input jack– Connect to the audio output jack of your audio equipment, video camera or

25 another VCR.

7

3 POWER button– Press to turn TV/VCR on and

off. Press to activate timer recording.

 

244 VOLUMEX /Y buttons–Adjust the volume level.

5

5

CHANNEL K /L buttons–Press to select the

 

desired channels for viewing or recording.

 

 

You may display the main menu on the TV screen

4

 

by pressing repeatedly this button on the

 

TV/VCR.

23

 

TRACKING function– Press to minimize video

 

‘noise’ (lines or dots on screen) during playback

9

 

 

mode. (See page 19.)

10

6

 

Remote Sensor Window– Receives the infrared

 

 

signals from the remote control.

22

7

STOP button– Press to stop the tape motion.

 

 

EJECT button– Press in the Stop mode to remove

21tape from TV/VCR.

L button–

Press to select setting modes from the on screen menu.

Press to enter digits when setting program. (for example: setting clock or timer program)

- 7 -

EN

9I03

- REAR VIEW - [Fig.3]

ANT.

8REW button– Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search)

s button–

Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP)

9PLAY button– Press to begin playback.

K button–

Press to select setting modes from the on screen menu.

Press to enter digits when setting program. (for example: setting clock or timer program)

10 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search)

B button–

When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input.

Press to determine setting modes from on screen menu.

Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP)

11 REC button– Press for manual recording.OTR button– Activates One Touch Recording. (only on the TV/VCR)

12 RECORD indicator– Flashes during recording. Lights up in theStand-bymode for Timer Recording.

13 EARPHONE jack– Connects to earphones (not supplied) for personal listening. The size of jack is 1/8” monaural (3.5mm).

14 Cassette compartment

15 Number buttons– Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press the 0 button and then 1 to 9.

26 27

+100 button– When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press the “+100” button then press “2” and “5”).

16 MENU button– Press to display the main menu on the TV screen.

17 DISPLAY button– Display the counter or the current channel number and current time on the TV screen. (See page 25.)

18 SPEED button– Press to choose the desired recording speed:SP/SLP.

19 T-PROG. CLEAR button– Press to cancel a setting of timer program. (See page 23.)

COUNTER RESET button– Press to reset counter to 0:00:00.

20 GAME button– Sets the game mode and external input mode at the same time. (See page 14.)

21 TIME SEARCH button– Press to activate Time Search mode.

22 PAUSE/STILL button– Press to temporarily stop the tape during the recording or to view a still picture during playback.

23 MUTE button– Mutes the sound. Press it again to resume sound.

24 CHANNEL RETURN button–Press to go back to the previously viewed channel. For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3.

25 WAKE UP/SLEEP button–Sets the Wake up or Sleep Timer. (See page 23.)

26 Power cord– Connect to a standard AC outlet (120V/60Hz).

27 ANT. terminal– Connect to an antenna or cable system.

- 8 -

EN

9I03

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

 

From Cable System or

Satellite Box or

Satellite Dish

 

Cable Box

OUT

(Not supplied)

IN

 

From

Cable System

75-ohmCoaxial

or

 

Cable (Not supplied)

 

VHF/UHF Antenna

Rod Antenna

(Not supplied)

(Supplied with 13” model only)

 

 

VHF Antenna

 

(Not supplied)

 

UHF Antenna

or

(Not supplied)

VHF/UHF or Combiner

(Not supplied)

ANT.

or

Flat twin-leadcable

 

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied with 13” model only) is detachable. Insert the stem of the antenna into the hole on the upper-backportion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TV/VCR as shown in the diagram below.For the best reception, fully extend the VHF/UHF Rod Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.

Bent pin

Cable Plug

(Needs to be straightened)

(Straight pin)

NOTE:

The connection of an indoor antenna may not always give acceptable TV reception.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:

1)Use the TV/VCR remote to select channels.

2)Program one or more unscrambled channels for Automatic Timer Recording.

NOTE: This unit willONLY record and view the same channel.

CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

- 9 -

EN

9I03

TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL

1. Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to record from your Cable Converter Box or Satellite Box.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or video camera), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHANNEL K orL button until “AUX” appears on the screen.

NOTE: “AUX” is found below the

lowest memorized channel. AUX (Example: CH2)

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-)markings.

3)Replace the cover.

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1 Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a standard AC outlet.

NOTE:

If some digits appear in the corner the screen, press the POWER button without unplugging the power cord

2 Turn on the TV/VCR

Press the POWER button to turn on

3 Select “ENGLISH” or “ESPAÑ

Select “ENGLISH” or

– SET UP –

“ESPAÑOL”=Spanish using the

B LANGUAGE

 

F.FWD/B or REW/s button. “[ ]”

[ENGLISH]

ESPAÑOL

 

 

indicate the selected language.

 

 

 

 

 

4 Begin auto preset

– SET UP –

Press the PLAY/K or STOP/L but-

LANGUAGE

 

ton to point to “AUTO PRESET”.

 

[ENGLISH]

ESPAÑOL

Then press the F.FWD/B button.

B AUTO PRESET

 

The tuner scans and memorizes all active channels in your area.

NOTES:

The TV/VCR distinguishes between standard TV channels and cable channels.

If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 12.

The TV/VCR may recognize TV channels to be CATV channels by the receiving conditions. In this case, try auto preset again in the fine receiving conditions.

5 After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K orL.

- 10 -

EN

9I03

TO SELECT A DESIRED CHANNEL

You can select the desires channel by using the CHANNEL K orL button on or directly pressing the number buttons on the remote control.

Note for using the number buttons:

When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”).

You must proceed single-digitchannel numbers with a zero (Example: 02 ... 09).

CLOCK SET UP (AUTO / MANUAL)

Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”.

AUTO CLOCK SETTING

You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS).

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP

USER’S SET UP V-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN

TIME SEARCH

2 Set “AUTO CLOCK” to [ON]

– SETTING CLOCK –

 

 

Press the F.FWD/B or REW/s

B AUTO CLOCK

[ON]

button repeatedly until [ON]

AUTO CLOCK CH

[AUTO]

 

 

appears.

MANUAL CLOCK SET

 

D.S.T.

[OFF]

 

 

 

 

3 Enter the channel number for

 

 

Press the PLAY/K or STOP/L button

 

“AUTO CLOCK CH”.

– SETTING CLOCK –

Then press the F.FWD/B or

AUTO CLOCK

[ON]

REW/s button until the channel

B AUTO CLOCK CH

[AUTO]

number for your local PBS station

MANUAL CLOCK SET

 

appears.

D.S.T.

[OFF]

If you do not know the PBS channel number, leave it set to [AUTO] which before [2]. The TV/VCR will search available channels for the local PBS select that channel.

4 Exit the Auto Clock Setting

Press the MENU button on the remote return to TV mode.

Make sure ...

TV/VCR power must be turned on.

Confirm that the antenna connections are correct.

The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:)

The channel is properly set in advance.

NOTES:

Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason.

If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.

If you do not know what your local PBS station is, then follow “MANUAL CLOCK SETTINGS”. The TV/VCR cannot control the channels of the cable converter box or satellite box.

5 Turn off the TV/VCR

Turn the TV/VCR off. Because the tions automatically while the TV/VCR

If you choose [AUTO],

The TV/VCR must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal.

If the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature.

MANUAL CLOCK SETTING

Make sure ...

TV/VCR power must be turned on.

In the example below, the clock is to be set to:

DATE

May 7th, 2002

SETTING TIME

5:40PM

- 11 -

EN

9I03

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP

USER’S SET UP V-CHIPSET UP LANGUAGE [ENGLISH]

CAPTION [OFF] ZERO RETURN

TIME SEARCH

2 Select “MANUAL CLOCK SET

Press the PLAY/K or STOP/L but-

– SETTING CLOCK –

ton to point to “MANUAL CLOCK

AUTO CLOCK

 

[ON]

SET”.

AUTO CLOCK CH

[AUTO]

Then, press the F.FWD/B button.

B MANUAL CLOCK SET

 

D.S.T.

 

 

[OFF]

 

 

3 Select the month

– MANUAL CLOCK SET –

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

ton until your desired month

0 5

/ – –

– – – – – – –

appears. (Example: May 05)

HOUR

MINUTE

 

Then, press the F.FWD/B button.

– –

: – –

– –

 

 

 

 

 

4 Select the day

– MANUAL CLOCK SET –

 

 

 

 

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

0 5 / 0 7 – – – – – – –

ton until your desired day appears.

 

 

 

 

(Example: 7th 07)

HOUR

MINUTE

 

– –

: – –

– –

 

Then, press the F.FWD/B button.

 

 

 

 

 

 

 

 

 

5 Select the year

 

 

 

 

Press the PLAY/K or STOP/L but-

 

 

 

 

ton until your desired year appears.

 

 

 

 

(Example: 2002)

 

 

 

 

Then, press the F.FWD/B button.

 

 

 

 

 

 

6 Select the hour

– MANUAL CLOCK SET –

 

 

 

 

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

 

 

 

 

ton until your desired hour appears.

0 5

/ 0 7

TUE

2 0 0 2

 

 

 

 

(Example: 5, PM)

HOUR

MINUTE

 

 

 

 

 

Then, press the F.FWD/B button.

0 5

: – –

PM

 

 

 

 

 

 

 

7 Select the minute

– MANUAL CLOCK SET –

 

 

 

 

Press the PLAY/K or STOP/L but-

MONTH DAY

 

YEAR

 

 

 

 

ton until the desired minute

0 5

/ 0 7

TUE

2 0 0 2

 

 

 

 

appears. (Example: 40)

HOUR

MINUTE

 

0 5

: 4 0

PM

 

 

 

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

CHANNEL SET UP AGAIN

Make sure ...

Press the POWER button to turn on the TV/VCR.

1 Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

the active channels in your area.

3 After scanning

The tuner stops on the lowest memorized

8 Start the clock

Press the MENU button on the remote control.

Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this chronize the clock with the correct

DELETING (OR ADDING)

CHANNEL

5:40 PM

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

- 12 -

EN

9I03

1 Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP USER’S SET UP

V-CHIPSET UP LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

2 Select “ADD/DELETE CH”

– CHANNEL SET UP –

Press the PLAY/K or STOP/L but-B ADD / DELETE CH (TV)

AUTO PRESET

ton to point to “ADD/DELETE CH”.

Press the F.FWD/B button.

3 Enter the desired channel

Press the PLAY/K or STOP/L button until your desired channel number appears. (You can also use the number buttons or the CHANNELK/L button to enter it) (Example: CH8)

08

ADD / DELETE

4Delete (or add) it from (into)

Press the F.FWD/B or REW/s number changes to light red. The from memory.

To delete another channel, repeat

If you press the F.FWD/B or REW/ again, the channel is memorized

Added channel: Light blue. Deleted channel: Light red.

5Exit the channel setup mode

Press the MENU button on the remote returns to TV mode.

NOTE: To confirm that channel(s) or added, press the CHANNELK or

SELECTING THE

Make sure ...

Press the POWER button to turnNOTE: This function effects only the screen menu and not the audio

1 Select “LANGUAGE”

Press the MENU button on the

– M E N U –

TIMER PROGRAMMING

remote control.

PICTURE CONTROL

CHANNEL SET UP

 

SETTING CLOCK

Press the PLAY/K or STOP/L but-

USER’S SET UP

B LANGUAGE [ENGLISH]

 

V-CHIPSET UP

ton to point to “LANGUAGE”.

CAPTION [OFF]

ZERO RETURN

 

TIME SEARCH

2 Select “ENGLISH” or “ESPAÑOL”

Select “ENGLISH” or “ESPAÑOL”= Spanish using the F.FWD/B or REW/s button.

3 Exit the Language mode

Press the MENU button on the remote control to return to TV mode.

NOTE: If for some reason the menu is in Spanish, press the MENU button on the remote control, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]”, then press the F.FWD/B button, then press the MENU button on the remote control.

DAYLIGHT-SAVINGTIME

Select this feature and the TV/VCR’s clock automatically will advance one hour in April, then reverse one hour in October.

When Daylight-SavingTime is ON, the clock will change automatically as follows:

First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

Press the POWER button to turn on the TV/VCR.

1 Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/ ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP USER’S SET UP V-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

2 Set “D.S.T.”(Daylight-Saving

Press the PLAY/K or STOP/L but-

– SETTING CLOCK –

ton to point to “D.S.T.”.

AUTO CLOCK

[ON]

Then, press the F.FWD/B or

AUTO CLOCK CH

[AUTO]

 

 

REW/s button until [ON] appears.

MANUAL CLOCK SET

 

 

B D.S.T.

[ON]

3 Exit theDaylight-SavingTime

Press the MENU button on the return to TV mode.

TO CANCEL THE

TIME

Repeat steps [1] to [2], select [OFF]

F.FWD/B or REW/s button.

- 13 -

EN

9I03

TV OPERATION

WATCHING A TV PROGRAM

1 Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

2 Select the channel number

Press the CHANNEL K orL button to select your desired channel number or press the number buttons on the remote control.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.

3 Adjust sound

Press the VOLUME X orY button to adjust the volume.

VOLUME 20

C C C C C C C C C C C C

GAME MODE

This function enables you to decrease contrast and making it suitable for GAME.

NOTE: This function can not be set

Press the GAME button on the

GAME

remote control. “GAME” appears

 

on the screen.

 

When you press the GAME button;

The TV/VCR comes on automatically

The TV/VCR will be in external matically.

TO CANCEL THE GAME

Press the GAME button or CHANNEL ton on the remote control.

DEGAUSSING

Magnetism from nearby appliances might affect the color of the TV picture.

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.

PICTURE CONTROL

The TV/VCR’s picture controls – BRIGHT, CONTRAST, COLOR, TINT andSHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.

NOTES:

Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.

When setting the Picture Control, the Game mode will be cancelled.

Make sure ...

TV/VCR power must be turned on.

1 Select “PICTURE CONTROL”

– M E N U –

TIMER PROGRAMMING

B PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

Then, press the F.FWD/B button.

2 Select item you want to adjust

Press the PLAY/K or STOP/L button until desired control is displayed.

BRIGHT CONTRAST

COLOR

BRIGHT

TINT

P P P P P P P C P P P P P P P+

 

SHARPNESS

 

3 Adjust the picture control

Press the F.FWD/B or REW/s button to adjust to your desired level.

 

REW/s

F.FWD/B

 

 

 

BRIGHT

to decrease

to increase

 

brightness

brightness

 

 

 

CONTRAST

to decrease

to increase

 

contrast

contrast

 

 

 

COLOR

to pale

to brilliant

 

 

 

TINT

to purple

to green

SHARPNESS

to soft

to clear

 

 

 

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 14 -

EN

9I03

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs, movies, news, pre-recordedtapes with either a dialogue caption or text display.

CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can watch half screen text information if you want.1-2: You may get these captions or text information by selecting either “1” or “2”. Caption “2” is used, usually for a second language if available.

NOTE:

Not all programs are broadcast with Your television is designed to provide closed captions from high quality VCR signals. Conversely, poor quality likely to result in caption errors or Common signal conditions which errors are listed below:

Automobile ignition noise

Electric motor brush noise

Weak snowy reception on TV screen

Multiplex signal reception displaying ghosts or airplane flutter.

Playback of poorly recorded or

NOTE:

If the TV/VCR displays a black box screen, this means that the TV/VCR is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

Make sure ...

TV/VCR power must be turned on.

1 Select “CAPTION”

– M E N U –

Press the MENU button on the

TIMER PROGRAMMING

SETTING CLOCK

 

PICTURE CONTROL

remote control.

CHANNEL SET UP

USER’S SET UP

Press the PLAY/K or STOP/L but-

V-CHIPSET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ton to point to “CAPTION”.

ZERO RETURN

TIME SEARCH

 

2 Select your desired caption menu

Press the F.FWD/B or REW/s

– M E N U –

button until your desired caption

TIMER PROGRAMMING

PICTURE CONTROL

menu appears.

SETTING CLOCK

USER’S SET UP

 

CHANNEL SET UP

([CAPTION1], [CAPTION2],

V-CHIPSET UP

B CAPTION [CAPTION1]

 

LANGUAGE [ENGLISH]

[TEXT1] or [TEXT2])

ZERO RETURN

TIME SEARCH

 

3 Exit the caption setting mode

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE CLOSED CAPTION SYSTEM

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Press the MENU button on the remote control to return to TV mode.

WHEN THE CLOSED CAPTION MODE IS ON

The On-ScreenDisplay will disappear after 5 seconds.

This is also true when the MUTE button is pressed, and when the PAUSE/STILL button is pressed while recording.

If there is a power failure of any kind, the unit will retain its memory for this feature.

V-CHIPSET UP

V-CHIPenables parents to prevent their children from watching inappropriate material on TV.V-CHIPreads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, “PROTECTED PROGRAM by

...” message appears on the TV screen. To block ratings, follow the steps below.

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

TV RATING SET UP

Make sure ...

TV/VCR power must be turned on.

1 Select“V-CHIPSET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L ton to point to“V-CHIPSET UP” Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

BV-CHIPSET UP LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN

TIME SEARCH

2 Select “TV RATING”

V-CHIPSET UP –

Press the PLAY/K or STOP/L but-

B TV RATING

ton to point to “TV RATING”.

MPAA RATING

 

Then, press the F.FWD/B button.

 

- 15 -

EN

9I03

B TV–Y [VIEW]
TV–Y7 ( ) [VIEW] TV–G [VIEW]
TV–PG ( ) [VIEW] TV–14 ( ) [VIEW] TV–MA ( ) [VIEW]

3 Select your desired item

Press the PLAY/K or STOP/L button to point to your desired item.

Then, press the F.FWD/B button to select [BLOCK] or [VIEW].

When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating [VIEW] automatically.

When you turn “TV-Y”to [VIEW], will turn to [VIEW] automatically.

When you select TV-Y7,TV-PG,TV

Selection

Rating Category

TV-Y

Appropriate for all

TV-Y7

Appropriate for children

TV-G

General Audience

TV-PG

Parental Guidance

TV-14

Unsuitable for children

 

 

TV-MA

Mature audience only

 

 

and you press the F.FWD/B button, will appear on the TV screen.

If you select the rating category

and turn it [BLOCK] or [VIEW], the (example: V for Violence) will turn [VIEW] automatically.

You can set the sub-ratingsto [BLOCK] individually when the rating category [BLOCK].

To set the sub-ratingsindividually, below.

When you select[TV-Y7]:

Press the STOP/L or PLAY/K

TV–Y7

[BLOCK]

button to select “FV” (Fantasy

B FV

[BLOCK]

 

 

Violence).

 

 

Then, press the F.FWD/B button

 

 

to select [BLOCK] or [VIEW].

 

 

When you select[TV-PG],[TV-14]or[TV-MA]:

Press the STOP/L or PLAY/K button to select “D”(Suggestive Dialog), “L”(Coarse Language), “S”(Sexual Situation), or “V”(Violence). Then, press the F.FWD/B button to select [BLOCK] or [VIEW].

TV–PG

[BLOCK]

B D

[BLOCK]

L

[BLOCK]

S

[BLOCK]

V

[BLOCK]

Note: When you select[TV-MA],“D” does not appear on the TV screen.

Thesub-ratingswhich set to

B TV–Y

[VIEW]

[BLOCK] appears next to the rat-

TV–Y7( )

[VIEW]

TV–G

[VIEW]

ing category in the TV RATING

TV–PG(DLSV )

[BLOCK]

TV–MA( LSV)

[BLOCK]

 

TV–14(DLSV )

[BLOCK]

menu.

 

 

4 Exit theV-Chipsetting mode

Press the MENU button on the remote control to return to original mode.

MPAA RATING SET UP

Make sure ...

TV/VCR power must be turned on.

1 Select“V-CHIPSET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to“V-CHIPSET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK

CHANNEL SET UP USER’S SET UP

BV-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

2 Select “MPAA RATING”

V-CHIPSET UP –

Press the PLAY/K or STOP/L but-

TV RATING

B MPAA RATING

ton to point to “MPAA RATING”.

 

Then, press the F.FWD/B button.

 

3 Select your desired item

Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW].

When you select the rating cate-

G

[VIEW]

PG

[VIEW]

PG–13

[VIEW]

B R

[BLOCK]

NC–17

[BLOCK]

X

[BLOCK]

Selection

Rating Category Explanations

G

General Audience

PG

Parental Guidance suggested.

PG-13

Unsuitable for children under 13

RRestricted; under 17 requires accompanying parent or adult guardian

NC-17No one under 17 admitted

X

Mature audience only

gory and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

When you turn “G” to [VIEW], the all ratings will turn to [VIEW] automatically.

4 Exit theV-Chipsetting mode

Press the MENU button on the remote control to return to original mode.

- 16 -

EN

9I03

RENTAL [OFF]
B REPEAT PLAY [ALL] AUTO RETURN [OFF]
– USER’S SET UP –

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use ofhigh-qualitytapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-backof the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECT

WRONG

PRECAUTIONS

Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

Avoid extreme heat, high humidity and magnetic fields.

Do not tamper with the cassette mechanism.

Do not touch the tape with your fingers.

NORMAL PLAYBACK

Make sure ...

TV/VCR power must be turned on

1 Insert a prerecorded tape

If the erase-protectiontab has been TV/VCR will start playback automatically

2

To begin playback

PLAY B

 

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button.

3

To stop playback

STOP

 

Press the STOP button when playback is completed.

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat you to repeat a tape indefinitely PLAY button.

ALL REPEAT: Repeat playback from to the end of the tape.

BLANK REPEAT: Repeat playback ning to a blank part, which is blank 10 seconds.

1 Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “USER’S SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP V-CHIPSET UP

LANGUAGE [ENGLISH] CAPTION [OFF]

ZERO RETURN TIME SEARCH

2 Select “ALL” or “BLANK”

Press the PLAY/K or STOP/L button to point to “REPEAT PLAY”.

Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears.

3 Exit the Repeat Play setting

Press the MENU button on the remote control to return to the TV mode.

4 Start playback

Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.

Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.

If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 17 -

EN

9I03

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
– M E N U –

SEARCH

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

ZERO RETURN

This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a blank portion of a tape.

1 Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2 Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

3Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is completed.

4To activate “ZERO RETURN” mode

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “ZERO RETURN”.

Then, press the F.FWD/B button. The counter will appear on the TV screen.

The tape will automatically stop when the counter returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

This function will not operate in recording mode. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

1Insert a tape.

2Select “TIME SEARCH” mode

Press the TIME SEARCH button (with each push it will increase by 10 minute).

3 Enter your desired time

TIME SEARCH

2 : 50

Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)

If you wish to cancel the Time Search press the MENU button on the remote

4 Begin Time Search

By pressing the REW/s or F.FWD/ TV/VCR will rewind or fast forward point.

The time counts down as the searching When 0:00 is reached, the tape will automatically.

TO CANCEL THE TIME point

Press the STOP/EJECT button on the remote control. This will delete the

STILL PICTURE

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.Press the PLAY button to return to playback.

NOTES:

Usually there will be video “noise” lines (black and white streaks or dots) on the screen. This is normal.

If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the “noise” lines.

This is not a fault of the machine, but is a byproduct of the technology involved in producing a TV/VCR with 2 video heads.

If it is left in the Pause mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode.

- 18 -

EN

9I03

NOISE CANCEL (in the Still mode)

This feature allows you to reposition or reduce the noise lines of a still picture.Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines.

NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K orL button.

NOTE:

If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”.

PICTURE CONTROLS

TRACKING ADJUSTMENT

Tracking adjustment will be set automatically (Digital Tracking function) when you start playback.

However when playing pre-recordedtapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNELK orL button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

1 Select “USER’S SET UP”

Press the MENU button on the

– M E N U –

 

TIMER PROGRAMMING

remote control.

PICTURE CONTROL

 

CHANNEL SET UP

 

 

SETTING CLOCK

 

Press the PLAY/K or STOP/L but-

B USER’S SET UP

 

LANGUAGE [ENGLISH]

 

V-CHIPSET UP

 

ton to point to “USER’S SET UP”.

CAPTION [OFF]

 

TIME SEARCH

 

 

ZERO RETURN

 

Then, press the F.FWD/B button.

 

 

 

 

 

2 Set “RENTAL” to [ON]

– USER’S SET UP –

Press the PLAY/K or STOP/L but-

B RENTAL

[ON]

ton to point to “RENTAL”.

REPEAT PLAY

[OFF]

AUTO RETURN

[OFF]

Press the F.FWD/B or REW/s button until [ON] appears.

3 Exit the Rental setting

Press the MENU button on the remote return to the TV mode.

4 Start playback

Press the PLAY button to start playback PLAY B” appears.

Once you select the Rental mode, even after you turn off the TV/VCR

TO CANCEL THE RENTAL

Repeat steps [1] and [2], select [OFF] F.FWD/B or REW/s button on the Press the MENU button on the remote return to TV mode.

If there is a power failure of any will retain its memory for this

RECORDING

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP mode (Standard Play) orSLP mode (Super Long Play).

The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode.

Tape Speed

Recording/Playback Time

 

 

 

 

 

 

Type of tape

T60

T120

T160

 

 

 

 

 

SP mode

1 hour

2 hours

2-2/3hours

 

 

 

 

 

SLP mode

3 hours

6 hours

8 hours

 

 

 

 

 

Note: You can playback a tape recorded in LP mode (Long Play).

ERASE PREVENTION

You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.

Tab

If you decide to record on the tape again, cover the hole with plastic tape.

Transparent Tape

- 19 -

EN

9I03

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTE: This unit willONLY record and view the same channel.

NORMAL RECORDING

OTR (One Touch Recording)

You can ONLY watch the same TV program that is being recorded.

1 Select the channel to be recorded

 

Press the number buttons on the

CH 10

remote control or the CHANNEL K orL button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be selected on the cable box or satellite

2 Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

SP

3 Begin recording

REC

Press the RECORD button.

SP

4 Stop recording

Press the STOP button when recording

This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

This function CANNOT be done from the remote control.

Recording starts immediately when the REC/OTR button is pressed.

When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.

To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.

To show the remaining time, press the DISPLAY button on the remote control so that “OTR” appears on the TV screen. (It will show up momentarily then disappear.)

Recording stops when 0:00 is reached.

Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160(or 6 hours usingT-120).

If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.

SKIPPING

SCENES DURING

Press the PAUSE/STILL button to

PAUSE

temporarily stop recording.

 

Press the PAUSE/STILL or

 

RECORD button to resume record-

 

ing.

SP

NOTES:

After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.

If “CLOSED CAPTION (ON)” is selected, the OnScreen Display will appear for 5 seconds, then disappear.

1 Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL K orL button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2 Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

- 20 -

EN

9I03

3 Begin OTR

OTR(2 : 30)

Press the REC/OTR button on the TV/VCR as many times as needed The recording length will be deter

mined by the number of times you

SP

press the REC/OTR button. Each additional push will increase the 30 minutes. It is set up to 8 hours.

Push(es)

Display

 

Recording length

1 push

 

(normal recording)

2 pushes

0:30

 

30 minutes

3 pushes

1:00

 

60 minutes

 

 

 

 

17 pushes

8:00

 

480 minutes

 

 

 

 

 

 

 

 

 

 

 

 

You may ing while record on year period

In the example below, the timer is being set to record:

DATE:

July 5th, 2002

SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.

Clock must be set to the correct time and date before setting the timer.

TV/VCR power must be turn on to program it.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

The channel you want to record is properly set in advance.

Avoid over lap of programs ...

There is a chance that a program will not be recorded when programs overlap;

The program with an earlier start has priority.

Once the earliest program finishes, the overlapping programs will begin recording in sequence.

The illustration below demonstrates the sequence of recordings.

Recording Sequence

Program 1 10:00AM-11:00AMProgram 29:00AM-10:00AMProgram 39:30AM-12:00PM

9:00AM

10:00AM

11:00AM

12:00PM

*Recording period is SHADED

1 Select “TIMER PROGRAMMING”

Press the MENU button on the

– M E N U –

B TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

If you have not yet set the clock, CLOCK SET” appears. If so,

[8] on page 11. Then set the timer

2 Select your desired program

Press the PLAY/K or STOP/L but-

– TIMER PROGRAMMING –

ton to select the desired program

CH DATE

BEGIN END

- -

-/

:

-:

position.

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

Then, press the F.FWD/B button.

B - -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

 

- -

-/-- - - -

-:--

-:-- - -

3 Set the channel number

Press the PLAY/K or STOP/L button until the desired channel number appears.

(Example: CH61)

Then, press the F.FWD/B button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

– TIMER PROGRAMMING –

CH

DATE

BEGIN

END

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

B 61

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

– TIMER PROGRAMMING –

CH

DATE

BEGIN

END

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

B 61

7/05 FRI

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

- -

-/-- - - -

-:--

-:-- - -

4 Select once, every day or weekly recording

For once recording :

Press the PLAY/K (up) button until the desired date appears. (Example: “7/05” for July 5th). Then, press the F.FWD/B button.

- 21 -

– TIMER PROGRAMMING –

CH

DATE

BEGIN

END

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

B 61

EVRY DAY -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

EN

9I03

For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday)

Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the F.FWD/B button.

For weekly recording : To record a TV program at the same

same channel every (Example: every Monday)

Press the STOP/L until “EVRY” and

day of the week appear together. F.FWD/B button.

– TIMER PROGRAMMING –

CH

DATE

BEGIN

END

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

B 61 EVRY MON -:--

-:-- - -

- - -/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

- -

-/--

- - - -:--

-:-- - -

5 Set beginning hour

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/

 

:

-:

ton until the desired hour appears.

- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

(Example: “ 7, PM” for 7:30PM)

B 61

7/05

FRI

7:12PM

-:-- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

Then, press the F.FWD/B button.

- -

-/--

- - -

-:--

-:-- - -

 

- -

- --/

- - -

- - -:

- - - --:

 

 

 

 

 

 

6 Set beginning minute

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:-- - -

ton until the desired minute appears.

- -

-/--

- - -

-:--

-:-- - -

- -

-/--

FRI- - -

-:--P

-:-- - -

(Example: “30” for 7:30PM)

B 61

7/05

7:30 M -:-- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

Then, press the F.FWD/B button.

- -

-/--

- - -

-:--

-:-- - -

 

- -

- --/

- - -

- - -:

- - - --:

 

 

 

 

 

 

7 Set end hour

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:-- - -

ton until the desired hour appears.

- -

-/--

FRI- - -

-:--

-:-- - -

B 61

7/05

7:30PM 8:30PM - -

(Example: “8, PM” for 8:50PM)

- -

-/--

- - -

-:--

-:-- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

Then, press the F.FWD/B button.

- -

-/--

- - -

-:--

-:-- - -

 

- -

- --/

- - -

- - -:

- - - --:

 

 

 

 

 

 

8 Set end minute

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH DATE

BEGIN END

- -

-/--

- - -

-:--

-:-- - -

ton until the desired minute appears.

- -

-/--

FRI- - -

-:--

-:-- - -

B 61

7/05

7:30PM 8:50PM- -

(Example: “50” for 8:50PM)

- -

-/--

- - -

-:--

-:-- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

Then, press the F.FWD/B button.

- -

-/--

- - -

-:--

-:-- - -

 

- -

- --/

- - -

- - -:

- - - --:

 

 

9 Set the tape speed

– TIMER PROGRAMMING –

Press the PLAY/K or STOP/L but-

CH

DATE

BEGIN END

- -

-/

 

:

-:

ton until the desired tape speed

- - -

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

appears. (Example: SP)

B 61

7/05

FRI

7:30PM

8:50PM SP

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

 

- -

-/--

- - -

-:--

-:-- - -

10 Finish setting the program

Press the F.FWD/B or REW/s button. The program is now completed.

To set another program, repeat steps [2] to [10].

Press the MENU button on the remote control to return to original mode.

11 Set the timer

Press the POWER button to set automatic timer recording. The RECORD indicator lights up.

You must turn off the TV/VCR to activate automatic timer recording.

If power is not turned off and you continue watching TV, “TIMER REC STANDBY” starts flashing screen 2 minutes before the programmed

TIMER PROGRAM EXTENSION

To shift the time schedule of an automatic timer recording.

1)Press the POWER button. 2)Repeat step [1] on page 21.

3)Press the RECORD button and select the desired program using the PLAY/K or STOP/L button.

4)Press the RECORD button again.

Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time.

NOTE: When you shift forward the time schedule during recording, the recording speed will automatically be set to the SLP mode.

5)Press the F.FWD/B or REW/s button to exit the setting menu. Then press the MENU button on the remote control to return to original mode.

TO CORRECT A PROGRAM

While setting a program; press the REW/s button to go back one step and enter the correct numbers using the PLAY/K or STOP/L button.

After setting a program;

1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21.

3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button.

4)Press the POWER button to set automatic timer recording.

- 22 -

EN

9I03

TO CANCEL AN AUTOMATIC TIMER RECORDING

After setting a program;

1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel.

3)Press the T-PROG.CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC TIMER RECORDING

2 Set “AUTO RETURN” to [ON]

– USER’S SET UP –

Press the PLAY/K or STOP/L but-

RENTAL

[OFF]

ton to point to “AUTO RETURN”.

REPEAT PLAY

[OFF]

B AUTO RETURN

[ON]

Press the F.FWD/B or REW/s button until [ON] appears.

3 Auto Return will begin

When all the timer recordings are TV/VCR will rewind to the beginning program(s).

NOTE:

If you press the POWER button rewinding, the Auto Return will

4 Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO

MODE

Repeat steps [1] and [2], select [OFF] F.FWD/B or REW/s button.

If there is a power failure of any will retain its memory for this

Make sure the channel you want to record is prop-

 

 

WAKE UP TIMER

 

 

erly set in advance.

 

 

The Wake Up Timer function turns on the TV/VCR

It is not necessary to press the RECORD button for

 

 

without using the POWER button after a desired

 

timer recording.

 

 

 

 

 

period of time.

 

 

 

Recording begins automatically at the Start time.

 

 

 

 

 

NOTES:

 

 

 

If you are recording using a Timer mode, you may

 

 

 

 

 

Use the remote control for this procedure.

 

not operate the unit manually.

 

 

 

 

 

Clock must be set to the correct time before setting

Theerase-preventiontab on the cassette must be in

 

 

 

the timer.

 

 

 

place (or you must put tape over the hole).

 

 

 

 

 

 

If you want to select [TAPE], you must insert a

If theerase-preventiontab is removed, the cassette

 

 

 

cassette tape in the TV/VCR. The tape will start

will be ejected when the POWER button is pressed

 

 

 

 

playback automatically on your desired time.

 

to off.

 

 

 

 

 

 

 

 

 

 

 

If the tape runs out before the end time, the

 

 

 

 

 

 

 

 

1 Select “WAKE UP TIMER”

 

 

 

TV/VCR will switch to the Stop mode immediate-

 

 

 

 

 

ly, and the tape will be ejected.

 

 

Press the WAKE UP/SLEEP button

 

 

 

 

 

 

on the remote control once, and

 

 

 

AUTO RETURN

 

confirm “ON/OFF” is pointed.

 

 

 

 

Press the F.FWD/B or REW/s

WAKE UP BON/OFF

[ON]

 

 

 

TIMER

TV/TAPE

[TV]

With this feature, after timer recording is finished,

 

button until [ON] appears.

 

TIME

[12:00AM]

 

 

 

 

the beginning of the recorded program(s) can be

 

 

 

 

 

 

searched for automatically.

 

 

 

2 Select “TV” or “TAPE”

 

 

 

 

 

 

Press the PLAY/K or STOP/L but-

 

 

 

1 Select “USER’S SET UP”

 

 

 

 

 

– M E N U –

 

ton until to point to “TV/TAPE”.

 

 

 

Press the MENU button on the

TIMER PROGRAMMING

 

Press the F.FWD/B or REW/s

 

 

 

SETTING CLOCK

 

 

 

 

 

PICTURE CONTROL

 

 

 

 

 

 

remote control.

CHANNEL SET UP

 

button, and select [TV] or [TAPE].

TIMER

BTV/TAPE

[TV]

 

B USER’S SET UP

 

 

 

WAKE UP

ON/OFF

[ON]

Press the PLAY/K or STOP/L

V-CHIPSET UP

 

 

 

 

TIME

[12:00AM]

LANGUAGE [ENGLISH]

 

 

 

 

 

 

 

 

 

 

CAPTION [OFF]

 

 

 

 

 

 

ton to point to “USER’S SET UP”

ZERO RETURN

 

 

 

 

 

 

TIME SEARCH

 

 

 

 

 

 

Then, press the F.FWD/B button.

 

 

 

 

 

 

 

 

- 23 -

 

 

EN

9I03

3 Set wake up time

Press the PLAY/K or STOP/L button until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears.

WAKE UP

ON/OFF

[ON]

TIMER

TV/TAPE

[TV]

 

BTIME

[12:00AM]

Each additional push will increase (or decrease) the time by 10 minutes.

4 Exit the Wake Up Timer setting

Press the MENU button on the remote control to return to TV mode.

1 Select “SLEEP TIMER”

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

2

Press F. your

Each

SLEEP TIMER [2:00]

 

the time by 30 minutes up to 120

 

Press the MENU button on the

 

the Sleep Timer setting.

 

TO CANCEL THE WAKE UP TIMER

Repeat step [1] but select [OFF].

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.

NOTE:

This function does not operate during Recording mode.

TO CANCEL THE SLEEP

Press the WAKE UP/SLEEP button control until “SLEEP TIMER”

To view the time left for sleep timer UP/SLEEP button twice, then press ton on the remote control to exit the ting.

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or relatives for your enjoyment.

WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

Connect your TV/VCR and a Source (Playing) VCR using the following diagram.

 

 

 

[Fig.8]

 

VIDEO AUDIO

[The TV/VCR]

 

 

 

[Ex: Source (playing)

 

VCR or camcorder]

Audio/Video

 

AUDIO

 

adapter cable

 

OUT

IN

(not supplied)

 

 

VIDEO

 

 

 

 

1)Insert a pre-recordedvideo cassette into the Source (Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want to record over, into the TV/VCR’s cassette compartment.

3)Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP).

4)Press the CHANNEL K orL button on the TV/VCR until “AUX” appears on the screen.

NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2)

5)Press the RECORD button on the TV/VCR. 6)Begin playback of the tape in the source (Playing)

VCR or camcorder.

NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation.

- 24 -

EN

9I03

ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:

WHEN THE CLOSED CAPTION MODE IS OFF:

<Off mode>

 

 

<Counter mode>

 

<Clock mode>

Counter mode: After 5 seconds, only

 

 

 

 

 

 

 

CH2

the counter remains. To clear it, press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5:40PM

the DISPLAY button.

 

 

 

 

 

 

 

 

 

 

Press

 

 

 

 

Press

 

 

Clock mode: After 5 seconds, only

 

 

 

 

 

 

once

 

 

 

 

once

 

 

the clock and the channel number

 

 

COUNT 0:12:34

 

 

 

remain. To clear them, press the DIS-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press once

 

 

 

 

 

 

 

 

 

 

 

 

WHEN THE CLOSED CAPTION MODE IS ON:

 

OFF mode

Clock/Counter mode

The On Screen Display disappear after 5 seconds.

 

 

 

 

 

STOP

5:40 PM

This is true even if the MUTE button is pressed, or the

 

 

 

 

 

 

 

CH2

 

 

 

 

 

 

 

 

PAUSE/STILL button is pressed while recording.

 

 

 

 

 

SP

COUNT 0:12:34

 

 

 

 

 

 

 

 

 

SPECIAL FEATURES

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The “–”indication will appear when the tape has rewound further than “0:00:00” on the tape counter.

AUTO REWIND

When the end of a tape is

-

ing, playback, or fast-forward,

-

matically rewind to the

 

finishes, the TV/VCR will

 

itself to off.

 

This function is operative

set

to the [OFF] position.

 

The tape will notauto-rewind

-

ing or One Touch Recording.

 

MAINTENANCE

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your TV/VCR may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-242-7158,to locate an Authorized Service Center.

NOTES:

Remember to read the instructions included with the video head cleaner before use.

Clean video heads only when problems occur.

SERVICING

Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceableparts inside. Turn off, unplug the power cord, and please call our help line at1-800-242-7158,to locate an Authorized Service Center.

- 25 -

EN

9I03

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.

PROBLEM

CORRECTIVE ACTION

No power.

Make sure the AC cord is connected to an AC outlet.

 

Make sure the power is turned on.

No picture and sound.

Make sure the AC cord is connected to an AC outlet.

 

Check antenna connection.

 

Let the TV/VCR program its tuner memory.

No picture or poor picture on

Adjust direction or replace antenna.

TV/VCR.

Adjust picture controls.

No sound or poor sound.

Adjust volume control on remote control or main unit.

 

Press the MUTE button to restore sound.

Timer recording is not possible.

Make sure the timer recording is set correctly.

 

Make sure the power is off.

 

Make sure the TV/VCR clock is set correctly.

Cannot go into Record mode.

Make sure the tape has anerase-preventiontab. If need, cover the

 

hole with plastic tape.

Playback picture is partially noisy.

Adjust tracking control for a better picture using the CHANNELK

 

orL button on the TV/VCR.

No picture but the audio is OK in

Head cleaning may be necessary. Refer to “AUTO HEAD

playback.

CLEANING” on page 25.

No operation by infrared Remote

Make sure the AC cord is connected to an AC outlet.

Control.

Check batteries in remote control.

Video or color fades in and out

You can not copy a copyrighted video tape. You are experiencing

when making a copy of a video tape.

copy guard protection.

 

 

CLOSED CAPTION PROBLEM

POSSIBLE REMEDY

 

 

My TV/VCR is showing captions

• You are watching a live broadcast and spelling errors made by the

that are misspelled.

closed captioning production company may pass through uncorrected.

 

A prerecorded program will not show any misspelled words because

 

of the normal time available for editing the captions.

My TV/VCR will not show the text

• Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of

are common for live broadcast. Most captioning production companies

what is being said.

can display a dialogue to a maximum of 220 words per minute. If a

 

dialogue exceeds that rate, selective editing is used to insure that the

 

captions remainup-to-datewith the current TV screen dialogue.

My captions are scrambled with

• Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen.

may cause scrambled or incomplete captions to appear.

 

 

My program guide listed a TV show

• Broadcasters may at times use a time compression process to speed

as being closed captioned but none

up the actual program so that additional advertising time can be

of the captions were displayed.

given. Since the decoder cannot read the compressed information,

 

captions will be lost.

My prerecorded video tape does not

• The video tape was either an illegal copy or the tape duplicating

show any captions. The tape box

company accidentally left out the captioning signals during the

mentions it being closed captioned.

copying process.

 

 

My TV screen shows a black box

• You are in the TEXT mode. Select CAPTION mode to CAPTION

on certain channels.

[OFF].

 

 

- 26 -

EN

9I03

SPECIFICATIONS

GENERAL SPECIFICATIONS

CRT :

13 or 19 inch in-linegun, 90˚

 

deflection tube

Television system :

NTSC-M

Closed caption system :§15.119/FCC

Video Heads :

Rotary two-head

Tape width :

1/2 inch

Tape speed

 

SP :

33.40mm/sec.

LP :

16.67mm/sec.

SLP :

11.12mm/sec.

Tuner channel

 

TV VHF Low :

#2~#6

TV VHF High :

#7~#13

TV UHF :

#14~#69

CATV

 

VHF :

5A

MID band :

A5~A1, A~I

SUPER band :

J~W

HYPER band :

W+1~W+84

Terminals

 

Antenna input :

VHF/UHF 75 ohms

 

unbalanced

Video input :

RCA connector [ 1

Audio input :

RCA connector [ 1

Earphone :

1/8” monaural (3.5 mm)

ELECTRICAL SPECIFICATIONS

Video input level :

0.5~2.0Vp-p

Audio input level :

-15dBs

Video S/N ratio :

More than 46dB

Audio S/N ratio :

More than 43dB

OTHER SPECIFICATIONS

[ 13 inch model ]

 

Power requirement :

AC 120V/60Hz

Power consumption :

65W

Dimensions :

H:15-3/4”(389mm)

 

W:15-3/16”(367mm)

 

D:14-13/16”(377mm)

Weight :

24.3 lbs (10.5kg)

[ 19 inch model ]

 

Power requirement :

AC 120V/60Hz

Power consumption :

80W

Dimensions :

H:19-11/16”(439mm)

 

W:19-7/16”(491mm)

 

D:18-5/16”(475mm)

Weight :

44.1 lbs (19.5kg)

Designs and specifications are subject to change without notice and without our legal obligation.

If there is a discrepancy between languages, the default language will be English.

CABLE CHANNEL DESIGNATIONS

If you subscribe to cable TV, the channels are displayed as 1-125.Cable companies often designate channels with letters orletter-numbercombinations. Please check with your local cable company. The following is a chart of common cable channel designations.

CATV channel

5A

2

3

4

5

6

7

8

9

10

11

12

13

A

B

 

TV Display

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

 

TV Display

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

R

S

T

U

V

W

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

 

TV Display

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

 

CATV channel

W+10

W+11

W+12

W+13

W+14

W+15

W+16

W+17

W+18

W+19

W+20

W+21

W+22

W+23

W+24

 

TV Display

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+25

W+26

W+27

W+28

W+29

W+30

W+31

W+32

W+33

W+34

W+35

W+36

W+37

W+38

W+39

 

TV Display

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

 

CATV channel

W+40

W+41

W+42

W+43

W+44

W+45

W+46

W+47

W+48

W+49

W+50

W+51

W+52

W+53

W+54

 

TV Display

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+55

W+56

W+57

W+58

A-5

A-4

A-3

A-2

A-1

W+59

W+60

W+61

W+62

W+63

W+64

 

TV Display

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATV channel

W+65

W+66

W+67

W+68

W+69

W+70

W+71

W+72

W+73

W+74

W+75

W+76

W+77

W+78

W+79

 

TV Display

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

 

CATV channel

W+80

W+81

W+82

W+83

W+84

 

 

 

 

 

 

 

 

 

 

 

TV Display

121

122

123

124

125

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 27 -

 

 

 

 

 

 

 

EN

9I03

CONTROLES DE OPERACIÓN Y SUS FUNCIONES

Este manual sirve para los modelos de 13" y 19". A excepción de la apariencia, la operación de los dos modelos es exactamente la misma. En este manual se muestra el modelo de 19".

NOTA:

No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante un mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el número de código dado tal vez no se pueda controlar la unidad. En este caso, póngase en contacto con el fabricante del mando a distancia universal.

VIDEO AUDIO

POWER VOLUME

CHANNEL

STOP/EJECT REW PLAY F.FWD REC/OTR EARPHONE

1 2

3

4

5

6

7 8 9101112 13

14

 

 

 

WAKE-UP

25

 

 

 

 

3

POWER

 

/SLEEP

EJECT

7

 

 

 

CHANNEL

 

 

 

 

 

 

 

 

 

RETURN

24

 

1

2

3

 

15

4

5

6

CHANNEL

5

 

 

 

 

 

 

 

 

 

 

7

8

9

 

 

 

 

0

+100

 

4

16

MENU

DISPLAY

MUTE

VOLUME

 

 

 

 

23

17

 

 

 

 

 

PLAY

 

9

8

 

 

REW

 

 

F.FWD

10

7

 

STOP

 

 

 

 

 

 

 

11

RECORD

 

SPEED

PAUSE/STILL

22

 

T-PROG.

 

 

18

 

GAME

TIME SEARCH

 

 

CLEAR

21

 

 

 

19

 

COUNTER

 

 

 

 

 

 

 

RESET

 

 

 

 

 

 

 

 

20

 

 

 

 

 

1Toma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de su videocámara u otra videograbadora.

2Toma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora.

3Botón de la alimentación (POWER)– Púlselo para encender y apagar el televisor/videograbadora. Púlselo para activar la grabación con temporizador.

5Botones de canales (CHANNEL K/L)–Púlselos para seleccionar los canales deseados para ver o grabar. Se puede mostrar el menú principal en la pantalla del televisor pulsando repetidamente este botón del televisor/videograbadora.

Función de seguimiento– Pulse los botones para minimizar el ruido de vídeo (líneas o puntos en la pantalla) durante la reproducción.

6Ventanilla sensora del mando a distancia–

Recibe las señales infrarrojas procedentes del mando a distancia.

7Botón de parada (STOP)– Púlselo para detener la cinta.

Botón de expulsión (EJECT)–Púlselo en el modo de parada para expulsar la cinta del televisor/videograbadora.

Botón L

Púlselo para seleccionar los modos de ajuste desde el menúde la pantalla.

Púlselo para introducir dígitos cuando establezca un programa.

(Por ejemplo: Para ajustar el reloj o establecer un programa de temporizador)

8Botón de rebobinado (REW)– Púlselo para rebobinar la cinta, o para ver la imagen en retroceso rápido durante el modo de reproducción. (Búsqueda con rebobinado)

Botón s

Púlselo para seleccionar un modo desde un menúparticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

9Botón de reproducción (PLAY)– Púlselo para iniciar la reproducción.

Botón K

Púlselo para seleccionar los modos de ajuste desde el menúde la pantalla.

Púlselo para introducir dígitos cuando establezca un

4 Botones de volumen (VOLUMEX /Y)–Ajustan

programa.

el nivel del volumen.

(Por ejemplo: Para ajustar el reloj o establecer un pro-

- 28 -

ES

0I29

ANT.

grama de temporizador)

10 Botón de avance rápido (F.FWD)–Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción.

(Búsqueda con avance rápido)

Botón B

Cuando establezca un programa (por ejemplo: para ajustar el reloj o para establecer un programa de temporizador), púlselo para determinar su elección y vaya al paso siguiente que quiera introducir.

Púlselo para determinar los modos de ajuste desde el menúde la pantalla.

Púlselo para seleccionar un modo desde un menúparticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

11 Botón de grabación (REC)–Púlselo para iniciar la grabación manual.

Botón de grabación de un toque (OTR)– Activa la grabación de un toque. (Sólo en el televisor/videograbadora)

12 Indicador de grabación (RECORD)–Parpadea durante la grabación.

Se enciende en el modo de espera de la grabación con temporizador.

13 Toma de auriculares (EARPHONE)–Para conectar los auriculares (no suministrados) y escuchar en privado. La toma es mono y tiene un tamaño de 3,5 mm.

14 Compartimiento del videocasete

15 Botones numerados– Púlselos para seleccionar los canales deseados para ver o grabar. Para seleccionar canales del 1 al 9, pulse primero el botón 0 y luego el botón 1 a 9.

Botón +100– Cuando seleccione canales de televisión por cable cuyo número sea superior al 99, pulse primero este botón, y luego pulse los dos últimos dígitos. (Para seleccionar el canal 125, pulse primero el botón “+100” y luego el “2” y el “5”.)

16 Botón de menú (MENU)– Púlselo para visualizar el menúprincipal en la pantalla del televisor.

17 Botón del visualizador (DISPLAY)–Visualiza el contador o el número del canal actual y la hora actual en la pantalla del televisor.

18 Botón de velocidad de cinta (SPEED)–Púlselo para elegir la velocidad de grabación deseada: SP/SLP.

19 Botón T-PROG. CLEAR– Púlselo para cancelar un programa de temporizador.

Botón de reposición del contador (COUNTER

26 27

RESET)– Púlselo para reponer el contador a 0:00:00.

20 Botón de juego (GAME)–Establece el modo del juego y el modo de entrada externa al mismo tiempo.

21 Botón de búsqueda con tiempo (TIME SEARCH)–Púlselo para activar el modo de búsqueda con tiempo.

22 Botón de pausa/imagen fija (PAUSE/STILL)–

Púlselo para detener temporalmente la cinta durante la grabación o para ver una imagen fija durante la reproducción.

23 Botón de silenciamiento (MUTE)–Silencia el sonido. Púlselo de nuevo para recuperar el sonido.

24 Botón de retorno de canal (CHANNEL RETURN)–Púlselo para volver al canal anterior. Por ejemplo, pulsando una vez este botón, la visualización del canal cambiará de 3 (canal actual) a 10 (canal anterior), y al pulsarlo por segunda vez, el canal cambiará del 10 al 3.

25 Botón del temporizador despertador/para dormir (WAKE UP/SLEEP)–Ajusta el temporizador para despertarse/dormir.

26 Cordón de alimentación–Conéctelo a la toma de CA estándar (120V/60Hz).

27 Terminal de antena (ANT.)–Para conectar una antena o sistema de televisión por cable.

- 29 -

ES

0I29

CONEXIONES DE ANTENA/CABLE

Caja de CATV o caja de emi-

siones vía satélite (no incluído)

OUT

Desde el sistema de Cable

Desde el cable coaxil o caja de emisiones vía satélite de 75 ohm del sistema de Cable

IN

Cable coaxil

de 75 ohm (no incluído)

 

Antena combinada de

Antena de varilla UHF/VHF

VHF/UHF

(incluído para solamente 13”)

(no incluído)

 

 

Antena VHF

 

(no incluído)

 

Antena UHF

 

(no incluído)

Combinador de VHF/UHF

(no incluído)

ANT.

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (incluído para solamente 13”) es desmontable. Inserte el vástago de la antena en el agujero de la parte trasera superior del televisor/videograbadora.

Conecte la varilla de antena de VHF/UHF o la antena combinada de VHF/UHF al terminal ANT. del televisor/videograbadora.

PARA GRABAR UN CANAL

CODIFICADO/DESCODIFICADO

1.Ajuste el selector de canales del televisor/videograbadora al canal de salida del convertidor de televisión por cable o del convertidor de emisiones vía satélite. (Ej.: CA3)

2.Seleccione el canal que desee grabar de su convertidor de televisión por cable o del convertidor de emisiones vía satélite.

ANTENAS SEPARADAS DE VHF/UHF

En algunos lugares será necesario utilizar una antena exterior.

CABLE SIN CONVERTIDOR/DESCODIFICADOR

Utilice esta conexión si su sistema de televisión por cable se conecta directamente a su televisor/videograbadora sin convertidor.Utilizando esta conexión usted podrá:

1)Utilizar el mando a distancia del televisor/videograbadora para seleccionar canales.

2)Programar uno o más canales sin codificar para realizar la grabación automática con temporizador.

NOTA: Con esta unidad SÓLO se podrá grabar y ver un mismo canal al mismo tiempo.

CABLE CON CONVERTIDOR/DESCODIFICADOR O CONVERTIDOR DE EMISIONES VÍA SATÉLITE

Si su servicio de televisión por cable le suministra un convertidor, o si usted utiliza un sistema de emisiones vía satélite, usted podrá utilizar las conexiones básicas mostradas aquí.

Utilizando estas conexiones, usted también podrá grabar canales codificados. Sin embargo, la selección de los canales deberá hacerse con el convertidor de televisión por cable con el convertidor de emisiones vía satélite. Esto significa que los canales no podrán ser cambiados con el mando a distancia del televisor/videograbadora. La grabación inatendida se limita a un canal cada vez.

MODO DE ENTRADA EXTERNA

Cuando utilice una señal de entrada externa (otra videograbadora o una videocámara), conecte los cables de salida de audio/vídeo del equipo de reproducción a las tomas AUDIO IN/VIDEO IN de su televisor/videograbadora. Y luego pulse el botón CHANNEL K oL hasta que “AUX” aparezca en la pantalla. Usted puede programar el temporizador para que explore todos los canales que puedan recibirse en su zona.

INSTALACIÓN DE LAS PILAS

1)Abra la tapa del compartimiento de las pilas del mando a distancia presionándola en el sentido de la flecha.

2)Inserte 2 pilas tamaño “AA” en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-).

3)Vuelva a poner la tapa.

- 30 -

ES

0I29

PREPARACIÓN DE CANALES POR

PRIMERA VEZ

1)Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar.

NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.

2)Pulse el botón POWER para encender el televisor/videograbadora.

3)Seleccione “ENGLISH” o “ESPAÑOL” utilizando el botón F.FWD/B o REW/s. “[ ]” indica el idioma seleccionado.

4)Pulse el botón PLAY/K o STOP/L para señalar “AUTOPRESELECCION”.

Luego pulse el botón F.FWD/B. El sintonizador explorará y memorizará todos los canales activos de su área.

NOTAS:

El televisor/videograbadora distingue entre los canales de televisión estándar y los canales de televisor por cable.

Si desea reproducir o grabar una cinta ANTES de preajustar el sintonizador, usted tendrá que pulsar el botón MENU en el mando a distancia. Para preajustar de nuevo el sintonizador, consulte “REPETICIÓN DE LA PREPARACIÓN DE CANALES”.

La unidad de televisor/videograbadora puede reconocer los canales de TV como ellos de TV por cable a causa de los condiciones de recepción. En este caso, pruebe el preajuste automático de nuevo en los condiciones finas de recepción.

5)El sintonizador se para en el canal memorizado más bajo. Si desea recuperar canales seleccionados, usted podrá seleccionar directamente el canal deseado con los botones numerados del mando a distancia o con los botones CHANNEL K oL.

AJUSTE DEL RELOJ

Cerciórese...

• La alimentación del televisor/videograbadora deberá estar conectada.

En el ejemplo de abajo, el reloj va a ajustarse así:

FECHA: 7 de mayo de 2002 HORA: 5:40 PM

1)Pulse el botón MENU en el mando a distancia. Pulse el botón PLAY/K o STOP/L para indicar “AJUSTE RELOJ”.

Luego, pulse el botón F.FWD/B.

2)Pulse el botón PLAY/K o STOP/L para indicar “AJUSTE MANUAL RELOJ”.

Luego, pulse el botón F.FWD/B.

3)Pulse el botón PLAY/K o STOP/L hasta que aparezca el mes deseado. (Ejemplo: Mayo - 05)

Luego, pulse el botón F.FWD/B.

4)Pulse el botón PLAY/K o STOP/L hasta que aparezca el día del mes deseado. (Ejemplo: 7 - 07)

Luego, pulse el botón F.FWD/B.

5)Pulse el botón PLAY/K o STOP/L hasta que aparezca el año deseado. (Ejemplo: 2002)

Luego, pulse el botón F.FWD/B.

6)Pulse el botón PLAY/K o STOP/L hasta que aparezca la hora deseada. (Ejemplo: 5, PM)

Luego, pulse el botón F.FWD/B.

7)Pulse el botón PLAY/K o STOP/L hasta que aparezca el minuto deseado. (Ejemplo: 40)

8)Pulse el botón MENU en el mando a distancia. Aunque los segundos no se visualizan, éstos empiezan a contar desde 00 cuando se pulsa MENU en el mando a distancia. Utilice esta función para sincronizar el reloj con la hora correcta.

- 31 -

ES

FUNAI CORPORATION

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-INTO FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general service procedure, please call 1-800-242-7158or write to the following:

FUNAI CORPORATION

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-242-7158

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in Malaysia

0EMN01882

 

T5300UA/T7300UA * * * * *