OWNER’S
MANUAL
If you need additional operating assistance after
reading this owner's manual
or to order replacement MFV210C accessories, please call
TOLL FREE : 1-800-242-7158.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT SAFEGUARDS
1.Read Instructions- All the safety and operating instructions should be read before the appliance is operated.
2.Retain Instructions- The safety and operating instructions should be retained for future reference.
3.Heed Warnings- All warnings on the appliance and in the operating instructions should be adhered to.
4.Follow Instructions- All operating and use instructions should be followed.
5.Cleaning- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments- Do not use attachments not recommended by the video product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories- Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing
serious injury to a child or adult, and serious damage to the 
appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9.Ventilation- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to .
10.Power Sources- This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
11.Grounding or Polarization- This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12.Power Cord Protection- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13.Outdoor Antenna Grounding- If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING |
ANTENNA |
LEAD |
|
AS PER NATIONAL ELECTRICAL CODE |
WIRE |
GROUND |
|
CLAMP |
|
|
ANTENNA |
|
DISCHARGE UNIT |
|
(NEC SECTION 810-20) |
ELECTRIC |
|
SERVICE |
|
EQUIPMENT |
GROUNDING CONDUCTORS |
|
(NEC SECTION 810-21) |
|
GROUND CLAMP |
NEC – NATIONAL ELECTRICAL CODE |
POWER SERVICE GROUNDING |
S2898A |
ELECTRODE SYSTEM |
|
(NEC ART 250, PART H) |
14.Lightning- For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.
15.Power Lines- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16.Overloading- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry- Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
18.Servicing- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the video product.
c.If the video product has been exposed to rain or water.
d.If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.
e.If the video product has been dropped or damaged in any way.
f.When the video product exhibits a distinct change in performance-this indicates a need for service.
20.Replacement Parts- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21.Safety Check- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
22.Heat- This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
|
IMPORTANT |
SAFEGUARDS |
|
PRECAUTIONS |
|
|
|
|
|
DESCRIPTION |
OF CONTROLS |
|
DISPLAY |
|
|
|
|
|
STATUS |
DISPLAY |
|
|
|
|
PREPARATION |
FOR USE |
|
PLAYBACK |
FUNCTION |
|
|
|
|
TROUBLESHOOTING |
GUIDE |
|
SPECIFICATIONS |
|
|
MAINTENANCE |
|
|
WARRANTY |
|
|
INSTRUCCIONES |
EN ESPAÑOL |
|
|
|
PRECAUTIONS
PRECAUTIONS
INSTALL LOCATION
For safety and optimum performance of your VCP:
•Install the VCP in a horizontal and stable position. Do not place anything directly on top of the VCP. Do not place the VCP directly on top of the TV.
•Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the VCP. Avoid locations subject to strong vibration or strong magnetic fields.
AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
•If, by accident, water is spilled on your VCP, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.
•Do not put your fingers or objects into the VCP cassette holder.
MOISTURE CONDENSATION WARNING
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the VCP at least for 2 hours until its inside is dry.
IMPORTANT COPYRIGHT
INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.
A NOTE ABOUT RECYCLING
This product's packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
– 2 – |
EN |
DESCRIPTION OF CONTROLS
Front Panel |
Remote Control |
POWER |
AUTO |
PICTURE |
REW F.FWD PLAY STOP/EJECT |
|
REPEAT |
SELECT |
|
|
|
POWER |
AUTO REPEAT |
9 |
6 |
8 |
7 |
10 |
11 |
3 |
5 |
4 |
2 |
1 |
1. Cassette Compartment |
|
|
7. PICTURE SELECT |
|||||||
2. STOP/EJECT button |
|
|
|
8. Remote Sensor |
|
|||||
3. REW button |
|
|
|
|
9. POWER button |
|
||||
4. PLAY button |
|
|
|
|
10. POWER indicator |
|
||||
5. F.FWD button |
|
|
|
|
11. AUTO REPEAT indicator |
|||||
6. AUTO REPEAT button |
|
|
|
|
|
|
|
|
||
Rear Panel |
|
|
|
|
|
|
18 |
13 |
16 |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
ANT IN |
|
|
|
|
|
|
|
|
|
CH3 |
|
|
|
|
|
|
|
|
|
AUDIO |
CH4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC 13. 2V |
|
|
|
|
|
|
|
|
|
|
REMOTE |
|
TV LINK |
|
|
|
|
|
|
|
|
CONTROL |
|
|
|
|
|
|
|
|
|
|
OUTPUT |
REMOTE |
ANT OUT |
|
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
12 |
|
|
|
19 |
15 |
20 |
17 14 |
|
|
|
|
|
|
|
||||
12. AC Power Cord |
|
|
|
|
17. ANT. OUT jack |
|
||||
13. AUDIO OUT jack |
|
|
|
|
18. DC13.2V (12V) supply jack |
|||||
14. ANT. IN jack |
|
|
|
|
19. REMOTE CONTROL jack |
|||||
15. VIDEO OUT jack |
|
|
|
|
20. TV REMOTE LINK jack |
|||||
16. CH3/CH4 selector switch |
|
|
|
|
|
|
|
|||
1 |
POWER |
EJECT |
12 |
|
|
||
11 |
|
|
|
|
TRACKING |
|
|
2 |
AUTO |
PICTURE COUNTER |
|
DISPLAY REPEAT SELECT RESET |
8 |
||
|
|
||
9 |
|
|
|
|
|
10 |
|
7 |
|
PLAY |
6 |
3 |
REW |
F.FWD |
|
|
STOP |
|
|
4 |
|
STILL |
5 |
|
|
||
1.POWER button
2.DISPLAY button
3.REW button
4.STOP button
5.STILL button
6.F.FWD button
7.PLAY button
8.COUNTER RESET button
9.AUTO REPEAT button
10.PICTURE SELECT button
11.TRACKING buttons
12.EJECT button
To insert the batteries
Install two AA batteries matching the polarity indicated inside the battery compartment.
DESCRIPTION |
OF CONTROLS |
DISPLAY |
|
STATUS |
DISPLAY |
DISPLAY |
STATUS DISPLAY |
Press [DISPLAY] to display the tape status, real time tape counter, and other information on the TV screen. (only on the remote control)
Each time you press this button, TV screen will change as shown.
When you press the function buttons or turn on the VCP, the status display will appear on the TV screen for 5 seconds.
<OFF mode> |
<STATUS mode> <COUNTER mode> |
0:12:34 |
|
|
|
|
|
|
Press |
5 SECONDS |
|
|
once |
0:12:34 |
|
|
0:12:34 |
|
|
Press once |
|
PLAY MODE |
|
|
REWIND MODE |
||
|
|
|
|
|
|
|
FAST FORWARD MODE |
|
|
|
EJECT MODE |
|
|
|
STOP MODE |
– 3 – |
EN |
Loading...