FUNAI F20LCTE User Manual

913.71 Kb
Loading...

TELEVISION LCD

ENGLISH

Owner’s Manual

F20LCTE F20LCTE-A

(STAND TYPE)

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453

OR VISIT OUR WEB SITE AT http://www.funai.us.

PORTABLE CART WARNING
S3126A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Do not place this TV on

an unstable cart, stand, tripod, bracket, or table. The TV may fall,

causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9.Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

10.Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

- 2 -

EN

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

 

ANTENNA

 

LEAD IN

 

WIRE

 

GROUND

 

CLAMP

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

 

 

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

S 2 8 9 8 A

(NEC ART 250, PART H)

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.

18.Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the TV.

c.If the TV has been exposed to rain or water.

d.If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.

e.If the TV has been dropped or damaged in any way.

f.When the TV exhibits a distinct change in performance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.

22.Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

ENGLISH

- 3 -

EN

PRECAUTIONS

The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

LOCATION

For safe operation and satisfactory performance of your TV, keep the following in mind when selecting a place for its installation:

Place your TV in a room with adequate ventilation.

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

Do not place your TV on soft surfaces, such as rugs or blankets.

Leave enough room for air to circulate around the bottom, top and back of the TV set.

To prevent fire, never place any type of candle or flames on the top or near the TV set.

To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

MAINTENANCE

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

PICTURE SCREEN CLEANING

If the liquid crystal display panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning the picture screen, disconnect the power cord.

SUPPLIED ACCESSORIES

Remote control unit (NE308UD)

Batteries (“AA” x 2)

1 2 3

4 5 6

7 8 9

0

Owner’s Manual (1EMN20182)

- 4 -

 

EN

 

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . .4

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . .4

CABINET CLEANING . . . . . . . . . . . . . . . . .4 PICTURE SCREEN CLEANING . . . . . . . . .4

C SUPPLIED ACCESSORIES . . . . . . . . . . . .4

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . .5

C OPERATING CONTROLS AND FUNCTIONS 6

C PREPARATION FOR USE . . . . . . . . . . . . .8

ANTENNA/CABLE CONNECTIONS . . . . . .8

C SET UP FOR USE . . . . . . . . . . . . . . . . . . .9

LANGUAGE SELECTION . . . . . . . . . . . . . .9 CHANNEL PRESETTING . . . . . . . . . . . . . .9

C OPERATIONS . . . . . . . . . . . . . . . . . . . . .10

WATCHING A TV PROGRAM . . . . . . . . . .10 SETTING THE SLEEP TIMER . . . . . . . . .10 CLOSED CAPTION . . . . . . . . . . . . . . . . .10 PICTURE ADJUSTMENT . . . . . . . . . . . . .11 BACK LIGHT SELECTION . . . . . . . . . . . .11

MTS (Multi-Channel Television Sound)

SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . .12

C TROUBLESHOOTING GUIDE . . . . . . . . .14

C SPECIFICATIONS . . . . . . . . . . . . . . . . . .15

C WARRANTY . . . . . . . . . . . . . . . . . . . . . . .16

ENGLISH

FEATURES

MTS/SAP Tuner

181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tuning system provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control.

On-Screen Function Display

Full-Function Remote Control

Sleep Timer

Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically.

V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.

Component Input

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase

 

Dealer Phone No.

 

Dealer Purchase from

 

Model No.

 

Dealer Address

 

Serial No.

 

- 5 -

EN

OPERATING CONTROLS AND FUNCTIONS

- FRONT PANEL -

 

- REAR PANEL -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

2

 

 

 

 

 

 

3

 

 

 

 

 

 

4

 

 

 

 

 

 

5

 

 

 

 

 

 

POWER

MENU

VOL.

CH.

SELECT

POWER

 

6

 

 

 

 

 

 

7

1

2

3

4

5

6

7

1.MENU button- Press to display the set up menu on the TV screen.

2.VOL. /buttons- Press to ajust the volume level.

Press VOL to determine the setting mode at

the set up menu.

Press to select or adjust a menu item.

3.CH. /buttons- Press to select desired channels.

Press to select or ajust a menu item.

4.SELECT button- Press to select TV or video input mode (VIDEO1 or VIDEO2).

5.POWER button- Press to turn the TV ON and OFF.

6.Infrared Remote Sensor- Receives the signals from the remote control.

7.POWER Light- Appears when the TV is ON.

1.AUDIO L/R input jacks- VIDEO2: Connect to the left/right audio output jacks of a DVD player or set top box.

Note: The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.

2.COMPONENT video input jacks- Connect to the component video out jacks of a DVD or set top box.

3.AUDIO L/R input jacks- VIDEO1: Connect to the left/right audio output jacks of a video camera, VCR or video game.

4.VIDEO input jack- Connect to the video output jack of a video camera, VCR or video game.

5.S-VIDEO input jack- Connect to the S-VIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied).

Note: The S-VIDEO jack is given priority over the VIDEO jack.

6.ANT(enna). in jack- Connect to an antenna, cable system or satellite system.

7.HEADPHONE jack- Connect headphone (not supplied) for personal listening.

Note: Do not connect earphones that have an L- shaped plug. The plug may interfere with the jack.

- 6 -

EN

- REMOTE CONTROL -

1

TV

 

POWER

 

 

INPUT

 

 

7

2

SELECT

DISPLAY

SLEEP

8

 

 

 

 

1

2

3

 

3

4

5

6

 

 

 

 

7

8

9

 

4

MENU

0

+100

 

5

MUTE

CH RETURN

9

VOL

 

CH

 

 

 

6

 

 

 

10

1.POWER button- Press to turn the TV ON and OFF.

2.INPUT SELECT button- Press to select TV or video input mode (VIDEO1 or VIDEO2).

3.Channel number button- Press to select desired channels. Remember to press “0” before a single digit channel.

+100 button- Press to select cable channels higher than 99.

4.MENU button- Press to display the set up menu on the TV screen.

5.MUTE button- Press to turn off the sound (Volume level display changes LIGHT RED

from LIGHT BLUE). Press it again or press VOL n or m to restore sound.

6.VOL n/m buttons- Press to ajust the volume

level.

Press VOL m to determine the setting mode from the set up menu.

Press to select or adjust a menu item.

7.DISPLAY button- Press to display the channel number and TV sound mode on the screen. The channel number will disappear by pressing it again.

8.SLEEP button- Press to set the sleep timer and start it.

9.CH RETURN button- Press to go back to the previously viewed channel. Press it again to return to the present channel.

10.CH /buttons- Press to select desired channels.

Press to select or ajust a menu item.

[INSTALLING THE BATTERIES]

1

2

 

Remove the battery compartment

 

cover on the remote unit by sliding

 

it while slightly twisting.

3

4

Replace the cover.

Insert 2 “AA” penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings.

Push the cover on its top side until it clicks in order to fit the cover completely to the compartment.

ENGLISH

BATTERY PRECAUTIONS

Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

- 7 -

EN

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

UHF

VHF

VHF/UHF

 

Antenna

Antenna

Combination Antenna

CATV Box *

(Not supplied)

(Not supplied)

(Not supplied)

or Satellite Box

 

 

 

 

 

 

(Not supplied)

 

 

 

OUT

IN

From Cable

 

 

 

 

 

 

 

 

 

 

System or Satellite

 

 

 

 

 

Antenna 75-ohm

 

RF Cable

 

75-ohm

 

Coaxial Cable

 

 

Coaxial Cable

 

 

(Not supplied)

 

From Cable System

VHF/UHF Combiner

 

 

 

 

 

 

 

 

 

 

 

 

(Not supplied)

OR

OR

OR

 

 

 

 

 

*Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company.

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by pressing INPUT SELECT on the remote control or SELECT on the front panel on the TV.

To use the jacks of AV-IN1 on the TV, select “VIDEO1”.

To use the jacks of AV-IN2 on the TV, select “VIDEO2”.

Note:

When you use the S-VIDEO connection, S-VIDEO jack is given priority over the VIDEO jack.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

- 8 -

EN

SET UP FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1Connect antenna or cable first, then connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen, press POWER without unplugging the power cord.

2Press POWER to turn on the TV.

3Press MENU so that the set up menu appears on the TV screen.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

4Press CH ▼or to point to “LANGUAGE”.

5Select [ENGLISH], [ESPAÑOL] or

[FRANÇAIS] by using the VOL ▼or .

- TV SET UP -

PICTURE

CHANNEL SET UP

 

V-CHIP SET UP

 

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

TV SOUND

[MAIN]

 

BACK LIGHT

[BRIGHT]

 

Press MENU to exit.

 

6

 

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1Press POWER to turn on the TV.

2Press MENU so that the set up menu appears on the TV screen.

3Press the CH ▼or to point to “CHANNEL SET UP”. Then press VOL ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

4Press CH ▼or to point to “AUTO PRESET CH”. Then press VOL ▲.

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

The tuner scans and memorizes all active channels in your area.

The TV distinguishes between standard TV channels and cable (CATV) channels.

When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. When there is no signal to ANT in jack, “NO TV SIGNAL” will appear. In this case, please check the antenna connections, then try the auto preset again.

When you press CH ▼or after selecting “AUTO PRESET CH”, the tuner will stop at the memorized channels only.

The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try AUTO PRESET CH action again when reception conditions are better.

ADD/DELETE FUNCTION

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or to point to “CHANNEL SET UP”. Then press VOL ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

3 Press VOL ▲ to select “ADD/DELETE CH”.

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

4Use CH ▼or to select the channel you wish to put into memory or to erase from memory.

Press VOL ▲ to highlight the channel number in LIGHT BLUE if you wish to add the channel into memory.

Press VOL ▲ to highlight the channel number in LIGHT RED if you wish to erase the channel from memory.

5Press MENU to exit.

- 9 -

EN

ENGLISH

OPERATIONS

WATCHING A TV PROGRAM

1Press POWER to turn on the TV.

2Select the desired channel with CH ▼or .

3Adjust the volume to the desired listening level using VOL ▼or .

4Adjust picture controls for a natural looking image. (See “PICTURE ADJUSTMENT”.)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn off

after a set time period.

1Press POWER to turn on the TV and press SLEEP

on the remote control .

SLEEP 10 MINUTE

2You may change the sleep

time by pressing SLEEP on the remote control repeatedly. The timer can be set up to 90 minutes. Each time SLEEP is pressed the time increases by 10 minutes. (The timer display counts up and sleep timer will be displayed on the screen when you press SLEEP on the remote control).

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

TO CANCEL THE SLEEP TIMER

Press SLEEP repeatedly until “SLEEP 0 MINUTE” is displayed.

CLOSED CAPTION

This TV can receive Caption and Text.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1Press MENU so that the set up menu appears on the TV screen.

2Press the CH ▼or to point to “CAPTION”.

3Press VOL ▼or to select the mode you wish.

4When done, press MENU to exit.

: Press VOL ▼or .

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

- TV

PICTURE

CHANNEL

V-CHIP SET

LANGUAGE

CAPTION

TV SOUND

BACK LIGHT

CAPTION

1)Closed Caption the TV screen signal contains

2)Paint-on mode: Pop-on mode:

Roll-up mode:

Note: If [CAPTION1] but a Closed characters will

TEXT MODE

1)Displays the 7 lines).

2)If the received caption or text

Notes:

When your TV signal (i.e., video output may not display

Captions and exactly.

Interference not to function

The caption or displayed while display is shown

5 If you see

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[CAPTION2]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

displayed on broadcast

on the

stored in displayed all at

(max. 4

is selected

scrolling (max.

not contain occur.

effects playback from a VCR’s your TV

or text.

TV voice

caption system

be functions

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

- 10 -

EN

PICTURE ADJUSTMENT

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or to point “PICTURE”. Then press VOL ▲.

: Press CH ▼or .

 

BRIGHTNESS

 

CONTRAST

 

 

COLOR

-

+

-

 

+

-

+

 

 

SHARPNESS

 

 

TINT

 

 

-

+

-

 

 

+

3Select the feature you wish to adjust with CH ▼ or and adjust it with VOL ▼or .

 

VOL

VOL

 

 

 

BRIGHTNESS

to decrease brightness

to increase brightness

 

 

 

CONTRAST

to decrease contrast

to increase contrast

 

 

 

COLOR

to pale

to brilliant

 

 

 

TINT

to purple

to green

 

 

 

SHARPNESS

to soft

to clear

 

 

 

Note:

In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press MENU and VOL ▲ so that “PICTURE” is selected. Press CH ▼or repeatedly until the menu disappears.

BACK LIGHT SELECTION

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or to point to “BACK LIGHT”.

3Press the VOL ▼or to select the mode you wish.

4When done, press MENU to exit.

: Press VOL ▼or .

- TV SET UP -

- TV SET UP -

- TV SET UP -

PICTURE

 

PICTURE

 

PICTURE

 

CHANNEL SET UP

CHANNEL SET UP

CHANNEL SET UP

V-CHIP SET UP

 

V-CHIP SET UP

 

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

LANGUAGE

[ENGLISH]

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

CAPTION

[OFF]

CAPTION

[OFF]

TV SOUND

[MAIN]

TV SOUND

[MAIN]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

BACK LIGHT

[NORMAL]

BACK LIGHT

[DARK]

MTS (Multi-Channel Television

Sound) SYSTEM

You can listen to a TV program in MTS stereo.

To show the following status, press DISPLAY on the remote control.

Menu

 

 

 

Selection

MAIN

MONO

SAP

Type of

broadcast

 

 

 

Regular

-None-

-None-

-None-

 

 

 

 

Stereo

STEREO

MONO

STEREO

broadcast

 

 

 

SAP

MAIN

MAIN

SAP

 

 

 

 

SAP: Second Audio Program, which means your program, can also be received in a second language or sometimes a radio station.

TO SELECT STEREO, MONO OR SAP IN STEREO BROADCAST

1Press MENU so that the set up menu appears on the TV screen.

2Press the CH ▼or to point to “TV SOUND”.

3Press the VOL ▼or to select your desired stereo mode. ([MAIN], [MONO] or [SAP])

: Press VOL ▼or .

- TV SET UP -

- TV SET UP -

- TV SET UP -

PICTURE

 

PICTURE

 

PICTURE

 

CHANNEL SET UP

CHANNEL SET UP

CHANNEL SET UP

V-CHIP SET UP

 

V-CHIP SET UP

 

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

LANGUAGE

[ENGLISH]

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

CAPTION

[OFF]

CAPTION

[OFF]

TV SOUND

[MAIN]

TV SOUND

[MONO]

TV SOUND

[SAP]

BACK LIGHT

[BRIGHT]

BACK LIGHT

[BRIGHT]

BACK LIGHT

[BRIGHT]

ENGLISH

- 11 -

EN

OPERATIONS (Continued)

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on

premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exceeds the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen.

To block certain ratings, follow the steps below.

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

You cannot access the menu when the “PROTECTED PROGRAM by ...” message appears. In this case, change to an unblocked channel, then press MENU.

TV RATING SET UP

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or to point to “V-CHIP SET UP”. Then press VOL ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP

 

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

TV SOUND

[MAIN]

BACK LIGHT

[BRIGHT]

3Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000.

ACCESS CODE

_ _ _ _

4Press CH ▼or to point to “TV RATING”. Then press VOL ▲.

- V-CHIP SET UP -

TV RATING

MPAA RATING

CHANGE CODE

5Press the CH ▼or to point to your desired item. Then press VOL ▲ to select [BLOCK] or [VIEW].

TV-Y

 

[VIEW]

TV-Y7(

)

[VIEW]

B TV-G

 

[BLOCK]

TV-PG(DLSV)

[BLOCK]

TV-14 (DLSV)

[BLOCK]

TV-MA( LSV)

[BLOCK]

<Selection>

<Rating Category >

• TV-Y :

Appropriate for all children

• TV-Y7:

Appropriate for children seven

 

and older

• TV-G :

General Audience

• TV-PG:

Parental Guidance suggested

• TV-14 :

Unsuitable for children under 14

• TV-MA:

Mature audience only

 

 

When you select the rating category and set it to [BLOCK], the higher rating will change to [BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.

When you set “TV-Y” to [BLOCK] or [VIEW], then all ratings will change to [BLOCK] or [VIEW] automatically.

When you set “TV-MA” to [VIEW], then all ratings will change to [VIEW] automatically.

6 Press MENU to exit.

MPAA RATING SET UP

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or to point to “V-CHIP SET UP”. Then press VOL ▲ .

3Use the number buttons to enter 4-digit access code. The default access code is 0000. If you have not set up your personal access code, you should use 0000.

ACCESS CODE

_ _ _ _

4Press CH ▼or to point to “MPAA RATING”. Then press VOL ▲.

- V-CHIP SET UP -

TV RATING

MPAA RATING

CHANGE CODE

5Press CH ▼or to point to your desired item. Then press VOL ▲ to select [BLOCK] or [VIEW].

G

[VIEW]

PG

[VIEW]

PG-13

[VIEW]

B R

[BLOCK]

NC-17

[BLOCK]

X

[BLOCK]

- 12 -

EN

+ 36 hidden pages