FUNAI DVD3315V, DVD/CD Player with Video Cassette Recorder DVD3315V User Manual

7.37 Mb
Loading...

Owner’s Manual

Manual del Usuario

DVD3315V

DVD/CD Player

with Video Cassette Recorder

 

 

 

 

OPEN/

 

 

 

 

 

 

 

 

 

CLOSE

 

 

 

 

 

 

 

 

 

VCR

 

DVD

DISC IN

PLAY

 

 

REC

 

TIMER REC

 

 

 

 

 

VIDEO

STANDBY-ON REW

F.FWD STOP/EJECT PLAY

RECORD

IR

SOURCE

PREV

STOP

PLAY

NEXT

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

TRACKING

 

 

 

 

DVD PLAYER / VCR

INFORMATION TROUBLESHOOTING SETTINGS OPTIONAL RECORDING PLAYBACK ADVANCED OPERATIONS BASIC PREPARATION PRECAUTIONS

© 2009 Funai Electric Co., Ltd.

8.

PRECAUTIONS

 

P

I NS

 

 

 

 

 

The model and serial numbers of this unit may be found on the cabinet.

 

You should record and retain those numbers for future reference.

Model No.:

 

 

 

 

 

Serial No.:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

 

 

 

 

 

 

 

 

CAUTION

 

 

 

 

The lightning flash with arrowhead symbol, within an

 

 

 

 

 

equilateral triangle, is intended to alert the user to the

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

 

 

 

 

presence of uninsulated“dangerous voltage” within the

 

DO NOT OPEN

 

 

 

 

apparatus’s enclosure that may be of sufficient magnitude

 

 

 

 

 

 

to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

 

 

 

 

 

 

The exclamation point within an equilateral triangle is

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER

 

 

 

intended to alert the user to the presence of important

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

 

 

 

operating and maintenance (servicing) instructions in

QUALIFIED SERVICE PERSONNEL.

 

 

 

the literature accompanying the apparatus.

 

 

 

 

 

 

 

The caution marking is located on the rear or bottom of the

 

 

cabinet.

 

Important Safeguards

 

1.READ INSTRUCTIONS - All the safety and operating instructions should be read before the apparatus is operated.

2.RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS - All warnings on the apparatus and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5.CLEANING - Unplug this apparatus from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: An apparatus that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the apparatus in the cleaning description otherwise required in item 5.

6.ATTACHMENTS - Do not use attachments not recommended by the apparatus manufacturer as they may cause hazards.

7.WATER AND MOISTURE - Do not use this apparatus near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

ACCESSORIES - Do not place this apparatus on an unstable cart, stand, tripod, bracket, or table. The apparatus may fall, causing serious injury to someone, and serious damage to the apparatus. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the apparatus. Any mounting of the apparatus should follow

the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An apparatus and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the apparatus and cart combination to overturn. AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un

arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9.VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the apparatus and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the apparatus on a bed, sofa, carpet, rug, or other similar surface. This apparatus should never be placed near or over a radiator or heat register. This apparatus should not be placed

in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCES - This apparatus should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your apparatus dealer or local power company. For the apparatus’s intended to operate from battery power, or other sources, refer to the operating instructions.

11.GROUNDING OR POLARIZATION - This apparatus is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the apparatus.

13.OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the apparatus, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/

2

NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

ANTENNA

LEAD

AS PER NATIONAL ELECTRICAL CODE

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

 

 

(NEC ART 250, PART H)

14.LIGHTNING - For added protection for this apparatus receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the apparatus due to lightning and power-line surges.

15.POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY - Never push objects of any kind into this apparatus through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus.

18.SERVICING - Do not attempt to service this apparatus yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the apparatus.

c.If the apparatus has been exposed to rain or water.

d.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation.

e.If the apparatus has been dropped or damaged in any way.

f.When the apparatus exhibits a distinct change in performance, this indicates a need for service.

20.REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.SAFETY CHECK - Upon completion of any service or repairs to this apparatus, ask the service technician to perform routine safety checks to determine that the apparatus is in proper operating condition.

22.HEAT - This apparatus should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

EN

PRECAUTIONS

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’au fond.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the apparatus and receiver.

3)Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam. LOCATION: Inside, near the deck mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

Avoid a place with drastic temperature changes.

Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be

generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

TRADEMARK INFORMATION

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

is a trademark of DVD Format/Logo Licensing Corporation.

DEW CONDENSATION WARNING

Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry.

-The unit is moved from a cold place to a warm place.

-Under conditions of high humidity.

-After heating a cold room.

NOTE ABOUT RECYCLING

This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

INFORMATION TROUBLESHOOTING SETTINGS OPTIONAL RECORDING PLAYBACK ADVANCED OPERATIONS BASIC PREPARATION PRECAUTIONS

EN

3

PREPARATIONP I N

Contents

PRECAUTIONS

Important Safeguards · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2

PREPARATION

Supplied Accessories · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4

About Cassette Tapes and Discs · · · · · · · · · · · · · · · · · · · 5

Playable Media · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 Unplayable Disc · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 Region Code · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 Color System · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

Function Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6

Remote Control · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6 Front Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8 Rear Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9 Installing the Batteries for the Remote Control · · · · · · 9

Connections · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10

Connection to a TV · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10 Connection to an Audio System· · · · · · · · · · · · · · · · · · · · 12

Initial Setups · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13

Turning on Unit for the First Time · · · · · · · · · · · · · · · · · · 13 Clock Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13

BASIC OPERATIONS

For VCR Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14 For Disc Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14 Hint for Disc Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15 Fast Forward / Fast Reverse Playback· · · · · · · · · · · · · · · 15 Still Mode / Step-by-step Playback · · · · · · · · · · · · · · · · · 15 Slow Forward Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15 To Skip the Titles, Chapters, Tracks, or Files · · · · · · · · · 15 To Reset the Cassette Tape Counter (Counter Reset) · · 15 To Rewind the Cassette Tape automatically

(Auto Rewind) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15

Supplied Accessories

remote control

RCA audio/video cables

(NB680UD)

(WPZ0102TM018 / WPZ0102LTE01)

owner’s manual

(1VMN27753)

Owner’s Manual

batteries (AA x 2)

4

ADVANCED PLAYBACK

Disc Menu · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 Calling Up a Menu Screen During Playback · · · · · · · · · 16 Resume Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 MP3 Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 Zoom · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 Camera Angles · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 Stereo Sound Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16 Title, Chapter, Track, Folder or File Search · · · · · · · · · · 16 Index Search · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17 Time Search · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17 Repeat Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17 Repeat A-B Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17 Auto Repeat Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 17 Programmed Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18 Random Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18

Settings· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18

Black Level Setting· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18 Virtual Surround · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18 Subtitle Language and Audio Language· · · · · · · · · · · · 19

On-Screen Display · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 19

RECORDING

Recording & OTR (One-touch Timer Recording)· · · · · 20 Timer Recording · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 21 Note for Timer Recording & OTR · · · · · · · · · · · · · · · · · · · 21 Satellite Link· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 22 Dubbing a Cassette Tape · · · · · · · · · · · · · · · · · · · · · · · · · · 22

OPTIONAL SETTINGS

Changing the DVD Settings (in the setup menu) · · · 23

PARENTAL Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 24 INITIALIZE · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 25

TROUBLESHOOTING

Troubleshooting Guide · · · · · · · · · · · · · · · · · · · · · · · · · · 26

INFORMATION

Maintenance · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27 Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27 LIMITED WARRANTY· · · · · · · · · · · · · · · · · · · · · back cover

© 2009 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN

PREPARATION

About Cassette Tapes and Discs

Playable Media

Media Type

DVD-

DVD-RW

DVD-R

DVD+RW DVD+R

CD-DA

CD-RW

CD-R

Cassette

VIDEO

Tape

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Logo

Symbols used

 

 

 

 

 

 

 

DVD-Video

AudioCD MP3

 

VHS

in this manual

 

 

 

 

 

 

 

 

Recorded

 

 

 

 

 

 

 

digital video (MPEG2)

digital audio or MP3

 

analog

Signal

 

video

 

 

 

 

 

 

Unplayable Disc

Caution: Never play the following discs.

• DVD-RAM

• DVD with region codes other than 1 or ALL

• HD DVD

• DVD-audio

• DTS-CD

• Blu-ray disc

• CD-i

• DVD-ROM for personal computers

 

• photo CD

• CD-ROM for personal computers

 

• video CD

• the discs with labels, scratches, stains, blemishes, etc.

 

Caution: The sound may not be heard on the following disc.

• super audio CD

Note: • Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.

Any other discs without compatibility indications

Note: • Unfinalized discs cannot be played back.

For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video format discs can be played back.

Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.

You can play back discs which bear the marks listed in “Playable Media”. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.

Region Code

Color System

This unit has been designed to play back DVD

with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on

the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on your DVD. If these region symbols do not appear on your DVD, you cannot play back the DVD in this unit.

The number inside the globe refers to region of the world. A DVD labeled for a specific region can only be played back on the unit with the same region code.

DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in PAL color systems.

PREPARATION

EN

5

PREPARATION

Function Overview

Remote Control

Button names described in the Owner’s Manual

The instructions in this manual rest primarily on the premise that you will operate on the remote control (Please be informed that some operations can only be made on the front panel of the unit).

1

2

3

4

5

6

7

8

9

1110

12

13

1514

16

17

STANDBY-ON SPEED

TIMER SET OPEN/CLOSE

 

 

 

 

 

 

1 2 3

TRACKING

4 5 6

7 8 9

CLEAR

INPUT

0 +10

DISPLAY VCR DVD MODE

PLAY

 

 

 

STOP

 

 

 

 

 

 

 

RECORD

PREV

NEXT

PAUSE

 

 

 

 

SEARCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TITLE

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

DISC MENU

 

OK

 

 

 

 

 

 

 

SETUP

 

 

 

 

 

 

 

 

ZOOM

 

 

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

SUBTITLE

ANGLE

REPEAT

A-B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

19

20

21

22

23

24

2526

27

28

29

30

31

32

33

VCR mode:

• Press to exit the VCR menu.

Pulse para salir del menú de VCR.

• Press to reset the cassette tape counter.

Pulse para restaurar el contador del casete.

6.DISPLAY ¬p.19

DVD mode:

• Press to display the current disc mode.

Pulse para visualizar el modo de disco actual.

VCR mode:

• Press to display the current time, cassette tape counter, and L1 / L2.

Pulse para visualizar la hora actual, el contador del casete y L1 o L2.

7. VCR (VCR) ¬p.13

• Press to activate VCR mode.

Pulse para activar el modo de VCR.

8.E/ D¬p.15

DVD mode:

• Press to search forward / backward through a disc.

Pulse para buscar hacia adelante o hacia atrás en el disco.

• Press [D]to begin slow forward playback in the pause mode. (DVD)

Pulse [ D] para iniciar la reproducción lenta hacia adelante en el modo pausa. (DVD)

VCR mode:

• Press to forward / backward a cassette tape.

Pulse para adelantar o retroceder un casete.

• Press [D] to begin slow forward playback in the pause mode.

Pulse [ D] para iniciar la reproducción lenta hacia adelante en el modo pausa.

9.PREV H(DVD) ¬p.15

Press to go back to the previous chapters / titles.

(DVD)

Pulse para volver a los capítulos o títulos anteriores. (DVD)

1.TIMER SET (VCR) ¬p.21

Press to put the VCR into standby mode for a timer

recording.

Pulse para colocar el VCR en modo espera para una grabación con temporizador.

2. SPEED (VCR) ¬p.20

• Press to select the recording speed.

Pulse para seleccionar la velocidad de grabación.

3. STANDBY-ON ¬p.13

• Press to turn the unit ON / OFF.

Pulse para encender o apagar la unidad.

• Press to go back to the previous tracks (CD) / files (MP3).

Pulse para volver a las pistas (CD) o archivos (MP3) anteriores.

10.RECORD (VCR) ¬p.20

Press to start recording or press repeatedly to

activate the One-touch Timer Recording.

Pulse para comenzar a grabar o pulse reiteradamente para activar la grabación rápida con temporizador.

11.SEARCH ¬p.16

DVD mode:

• Press to search chapter / title (DVD).

Pulse para buscar un capítulo o título (DVD).

4.Number buttons (DVD) ¬p.16

Press to select chapter / title (DVD), track (CD), or

folder / file (MP3) directly.

Pulse para seleccionar un capítulo o título (DVD), pista (CD), o carpeta o archivo (MP3) directamente.

5.CLEAR ¬p.13

DVD mode:

Press to clear numbers entered incorrectly. (DVD,

CD, MP3)

Pulse para borrar los números ingresados incorrectamente. (DVD, CD, MP3)

• Press to cancel the point for A-B repeat. (DVD, CD,

 

 

MP3)

 

 

Pulse para cancelar el punto para repetición de A-B. (DVD, CD, MP3)

 

 

• Press to clear all the tracks entered for

 

 

programmed playback. (DVD, CD, MP3)

6

 

Pulse para borrar todas las pistas ingresadas para la

 

reproducción programada. (DVD, CD, MP3)

 

• Press to search track (CD), or folder / file (MP3).

Pulse para buscar una pista (CD), carpeta o archivo (MP3).

• Press to search time (DVD, CD).

Pulse para buscar la hora (DVD, CD).

VCR mode:

• Press to call up the index or time search menu.

Pulse para visualizar el menú de búsqueda de hora o el índice.

12. TITLE (DVD) ¬p.16

• Press to call up the top menu on disc. (DVD)

Pulse para visualizar el menú principal del disco. (DVD)

13. DISC MENU (DVD) ¬p.16

• Press to call up the disc menu on a disc. (DVD)

Pulse para visualizar el menú del disco en un disco. (DVD)

EN

PREPARATION

14.SETUP ¬p.23

DVD mode:

• Press to call up the DVD menu.

Pulse para visualizar el menú de DVD.

VCR mode:

• Press to call up the VCR menu.

Pulse para visualizar el menú de VCR.

15.ZOOM (DVD) ¬p.16

Press to magnify part of a picture. (2x, 3x, 4x or 1/2x)

(DVD)

Pulse para amplificar parte de una imagen. (2x, 3x, 4x ó 1/2x) (DVD)

16. SUBTITLE (DVD) ¬p.19

• Press to select subtitles on a disc. (DVD)

Pulse para seleccionar subtítulos en un disco. (DVD)

17. ANGLE (DVD) ¬p.16

• Press to select camera angles on a disc. (DVD)

Pulse para seleccionar ángulos de la cámara en un disco. (DVD)

18.OPEN/CLOSE A¬p.14

DVD mode:

• Press to open or close the disc tray.

Pulse para abrir o cerrar la bandeja del disco.

VCR mode:

• Press to remove the videotape from the cassette

compartment.

Presiónelo para retirar la cinta de video del compartimiento del casete.

19.TRACKING o/ p(VCR) ¬p.15

Press either one of the buttons to stabilize the picture manually if the picture begins to vibrate

vertically during the still mode.

Pulse cualquiera de los botones para estabilizar la imagen de forma manual si ésta comienza a vibrar de forma vertical durante el modo pausa.

20.+10 (DVD)

Press to change title / chapter / track / folder / file

number by 10 at a time.

Pulse para cambiar un título, capítulo, pista, carpeta o número de archivo de 10 por vez.

21. INPUT (VCR) ¬p.20

• Press to select input “L1” / “L2”.

Pulse para seleccionar entrada “L1” o “L2”.

22. MODE (DVD) ¬p.18

• Press to set virtual surround ON / OFF.

Pulse para apagar o encender sonido envolvente virtual.

• Press to set black level ON / OFF. (DVD)

Pulse para apagar o encender nivel de negro. (DVD)

• Press to arrange the playing order or to perform

random playback. (DVD, CD, MP3)

Pulse para organizar el orden de reproducción o para ejecutar la reproducción aleatoria. (DVD, CD, MP3)

23. DVD (DVD) ¬p.14

• Press to activate DVD mode.

Pulse para activar el modo de DVD.

24.PLAY B¬p.14

Press to begin the playback of a disc / a cassette

tape.

Pulse para comenzar la reproducción de un disco o casete.

25.STOP C¬p.14

DVD mode:

• Press to stop disc playback.

Pulse para detener la reproducción del disco.

VCR mode:

• Press to stop the playback / recording of a cassette tape.

Pulse para detener la reproducción o grabación de un casete.

26. NEXT G(DVD) ¬p.15

• Press to skip chapters / titles. (DVD)

Pulse para saltar capítulos o títulos. (DVD)

• Press to skip tracks (CD) / files (MP3).

Pulse para saltar pistas (CD) o archivos (MP3).

EN

27.PAUSE F¬p.15

DVD mode:

• Press to pause disc playback.

Pulse para pausar la reproducción del disco.

• Press to advance the playback one frame at a time.

(DVD)

Pulse para avanzar la reproducción un cuadro por vez. (DVD).

VCR mode:

• Press to pause the playback / recording of a cassette

tape.

Pulse para pausar la reproducción o grabación de un casete.

• Press to advance the playback one frame at a time.

Pulse para avanzar la reproducción un cuadro por vez.

28. AUDIO (DVD) ¬p.19

• Press to select audio languages on a disc. (DVD)

Pulse para seleccionar idiomas de audio en un disco. (DVD)

• Press to select “STEREO” / “L-ch” / “R-ch”. (CD)

Pulse para seleccionar “STEREO”, “L-ch” o “R-ch”. (CD)

29. OK (DVD) ¬p.16

• Press to confirm the items.

Pulse para confirmar los ítems.

30.K/ L/ s/ B¬p.16

DVD mode:

• Press to select items / settings.

Pulse para seleccionar ítems o ajustes.

VCR mode:

K/ L:

• Press to select an item on the VCR menu.

Pulse para seleccionar un ítem en el menú de la VCR. s:

• Press to go back one step during clock and timer

programming.

Pulse para retroceder un paso durante la programación del reloj y el temporizador.

B:

• Press to proceed to the next VCR menu.

Pulse para ir al siguiente menú de VCR.

31. RETURN (DVD) ¬p.18

• Press to return to the previous operation in menu.

Pulse para volver a la operación anterior en el menú.

32.A-B (DVD) ¬p.17

Press to repeat between your chosen point of A and

B. (DVD, CD, MP3)

Pulse para repetir entre los puntos de A y B que seleccionó. (DVD, CD, MP3)

33.REPEAT ¬p.17

DVD mode:

• Press to play back a chapter / title repeatedly. (DVD)

Pulse para reproducir un capítulo o título reiteradamente. (DVD)

• Press to play back a track / disc repeatedly. (CD)

Pulse para reproducir una pista o disco reiteradamente. (CD)

• Press to play back a file / folder / disc repeatedly.

(MP3)

Pulse para reproducir un archivo, carpeta o disco reiteradamente. (MP3)

VCR mode:

• Press to select the repeat mode ON / OFF.

Pulse para encender o apagar el modo de repetición.

7

INFORMATION TROUBLESHOOTING SETTINGS OPTIONAL RECORDING PLAYBACK ADVANCED OPERATIONS BASIC PREPARATION PRECAUTIONS

PREPARATION

Front Panel

 

1 2

3

4

5

6

7

 

8

9 10

11

 

 

 

 

 

 

OPEN/

 

 

 

 

 

 

 

 

 

 

 

 

CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

VCR

 

DVD

DISC IN

PLAY

 

 

 

 

REC

TIMER REC

 

 

 

 

 

 

 

 

VIDEO

STANDBY-ON REW

F.FWD STOP/EJECT PLAY

RECORD

IR

 

SOURCE

PREV

STOP

PLAY

 

NEXT

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRACKING

 

 

 

 

 

 

DVD PLAYER / VCR

12

13

14 15 16 17

18

19

L2 input jacks

1.STANDBY-ONy¬p.14

Press to turn on / off the unit.

2.Power on indicator

Lights up when the unit is turned on.

3.cassette compartment (VCR) ¬p.14

Insert a cassette tape here.

4.REC indicator (VCR)

Lights up during a recording, OTR (One-touch Timer Recording) or timer recording.

Blinks when a recording is paused.

5.TIMER REC indicator (VCR) ¬p.21

Lights up when a timer recording or OTR (One-touch Timer Recording) has been set.

Blinks when a timer recording or OTR (One-touch Timer Recording) has been finished or if the unit could not complete the recording due to some error.

6.OPEN/CLOSE A(DVD) ¬p.14

Press to open / close the disc tray.

7.VCR output indicator (VCR)

Lights up when the unit is in the VCR mode.

8.DVD output indicator (DVD)

Lights up when the unit is in the DVD mode.

9.DISC IN indicator (DVD)

Lights up when the disc is in the disc tray.

10.PLAY indicator (DVD)

Lights up when the inserted disc is being played back.

Blinks when an unplayable disc is inserted.

11.Disc tray (DVD) ¬p.14

Place a disc when it is open.

12.VIDEO IN jack (VCR) ¬p.22

Connect an RCA video cable from the video output jack of your camcorder and other such devices here.

13.AUDIO IN jack (VCR) ¬p.22

Connect an RCA monaural audio cable from the audio output jack of your camcorder and other such devices here.

14.REW E(VCR) ¬p.15

Press to rewind the cassette tape or to view the picture rapidly in reverse during playback (rewind search).

15.F.FWD D(VCR) ¬p.15

Press to rapidly advance the cassette tape or view the picture rapidly in forward during playback (forward search).

2021 22 23 24 25

16.STOP C/ EJECT A(VCR) ¬p.14 STOP C:

Press to stop the playback / recording of a cassette tape.

EJECTA:

Press to remove the cassette tape from the cassette compartment.

17.PLAY B(VCR) ¬p.14

Press to start the playback of a cassette tape.

18.RECORD I(VCR) ¬p.20

Press once to start a recording.

Press repeatedly to activate an OTR (One-touch Timer Recording).

19.infrared sensor window ¬p.9

Receive signals from the remote control so that you can control the unit from a distance.

20.TRACKING o/ p(VCR) ¬p.15

Press either one of the buttons to stabilize the picture if the picture begins to vibrate vertically during the cassette tape playback.

21.SOURCE

Press to switch to either DVD / VCR mode.

22.PREV H(DVD) ¬p.15

Press to go back to the previous chapters / titles / tracks / files during playback.

Press and hold it to begin fast reverse search.

23.STOP C(DVD) ¬p.14

Press once to stop disc playback temporarily.

24.PLAY B(DVD) ¬p.14

Press to start / resume playback.

25.NEXT G(DVD) ¬p.15

Press to skip chapters / titles / tracks / files during playback.

Press and hold it to begin fast forward search.

Note: • You can turn on the unit by pressing the buttons 6 or 24 (circled ones) or by inserting a cassette

tape.

If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use

[OPEN/CLOSE A] or [STOP/EJECT CA] on the unit.

8

EN

PREPARATION

Rear Panel

 

 

 

 

 

 

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

DVD/VCR

VCR

 

DIGITAL

AUDIO

S-VIDEO

COMPONENT

AUDIO OUT

 

 

 

 

 

 

 

AUDIO OUT

OUT

OUT

VIDEO OUT

 

 

 

 

 

 

 

 

Y

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

AUDIO IN

 

 

 

 

 

CB

R

 

L1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COAXIAL

R

 

 

VIDEO OUT

VIDEO IN

 

 

 

 

CR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

4 5

6

7

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.DVD/VCR AUDIO OUT jack ¬p.10

Connect an RCA audio cable from here to the audio input jack of your television or audio device. Standard connection for DVD/VCR use.

2.VCR AUDIO IN jack ¬p.22

Connect an RCA audio cable from the audio output jack of your camcorder, VCR, etc. to here.

3.DIGITAL AUDIO OUT COAXIAL* jack ¬p.12

Connect a digital audio coaxial cable from here to the digital audio coaxial in jack of a decoder or audio receiver.

4.DVD AUDIO OUT* (analog) jack ¬p.11

Connect an RCA audio cable from here to the audio input jack of your television or audio device.

5.S-VIDEO OUT* jack ¬p.11

Connect an S-video cable from here to the S-video input jack of your television.

6.COMPONENT VIDEO OUT* jack ¬p.11

Connect component video cables from here to the component video input jacks of your television.

7.DVD/VCR VIDEO OUT jack ¬p.10

Connect an RCA video cable from here to the VIDEO input jack of your television or audio device. Standard connection for DVD/VCR use.

8.VCR VIDEO IN jack ¬p.22

Connect an RCA video cable from here to the video output jack of your camcorder, VCR, etc.

*For enhanced DVD viewing. DVD/VCR video and audio connection required to view cassette tapes.

Note: • RCA audio and video cables are included for both VCR and DVD viewing. You can enhance

your DVD picture and sound quality with an S-video cable, component video cables, or a digital audio coaxial cable. Please purchase the necessary cables at your local store.

(Refer to pages 11-12.)

Installing the Batteries for the Remote Control

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Keep the following in mind when using the remote control:

Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

The maximum operable ranges of the unit are:

-Line of sight: approx. 23 feet (7m)

-Either side of center:

approx. 16 feet (5m) within 30°

-Above: approx. 16 feet (5m) within 15°

-Below: approx. 10 feet (3m) within 30°

30˚ 30˚

16 feet (5m)

16 feet (5m)

23 feet (7m)

Caution: Never throw batteries into a fire.

Note: • Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones. Although they may look similar, different batteries may have different voltages.

If the remote control is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

Do not try to recharge batteries; they can overheat and rupture.

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

PREPARATION

EN

9

+ 19 hidden pages