FUNAI DP170MW8B, Magnavox DP170MW8B User Manual

6.96 Mb
Loading...

Owner’s Manual

Please read before using this unit.

DVD/CD Player

DP170MW8B

Supplied Accessories

remote control

RCA audio/video cables

(NA475UD)

(WPZ0102TM018 /

 

 

WPZ0102LTE01)

 

batteries

owner’s manual

Owner’s Manual

(AAA x 2)

(1VMN27233)

 

Connecting to RF Modulator (Not Supplied)

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using an RF modulator. In this case, follow the instructions below.

1)Disconnect the power cords of the devices from the AC outlet.

2)Make the connection as illustrated below.

3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.

4)Plug in the power cords of the devices to the AC outlet.

5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator.

rear of this unit

L

Y

 

CR/PR COMPONENT VIDEO OUT

 

 

 

COAXIAL

 

 

R

 

 

 

 

 

AUDIO

VIDEO

CB/PB

DIGITAL

HDMI OUT

OUT

OUT

AUDIO OUT

L

R

 

 

 

 

 

 

RCA video cable

 

 

 

 

 

 

AUDIO

VIDEO

 

 

rear of TV

 

 

OUT

OUT

 

 

 

RCA audio cable

ANT. IN

VHF / UHF

rear of your RF

 

 

 

modulator

 

antenna

 

 

 

 

 

 

 

 

 

 

 

RF coaxial cable

or

4

R

L

3

cable TV

RF coaxial

ANT. IN CHANNEL AUDIO IN VIDEO IN TO TV

cable

 

company

Set channel 3 or 4

Note:

RF modulator is not supplied with this unit. You need to purchase it at your local store.

The quality of picture may become poor if this unit is connected to an RF modulator.

If you need additional operating assistance after reading this owner’s manual, please call

TOLL FREE : 1-800-605-8610

or visit our web site at http://www.magnavox.com/support

INSTRUCCIONES EN

ESPAÑOL INCLUIDAS.

Contents

 

PRECAUTIONS

 

Laser Safety ...............................................................................................

2

Important Safeguards..............................................................

3

Location and Handling .........................................................................

4

Avoid the Hazards of Electrical Shock and Fire ...........................

4

Moisture Condensation Warning......................................................

4

About Copyright......................................................................................

4

Notice for Progressive Scan Outputs...............................................

4

Symbols Used in this Manual .............................................................

4

Maintenance .............................................................................................

4

About the Discs.........................................................................

5

Playable Discs...........................................................................................

5

Unplayable Discs.....................................................................................

5

SETUP

 

Connections..............................................................................

6

Connection to a TV.................................................................................

6

Connection to a TV with an HDMI Compatible Port..................

7

Connection to an Audio System .......................................................

8

Function Overview ...................................................................

9

Rear Terminals..........................................................................................

9

Front Panel Indicator .............................................................................

9

HDMI Setup...............................................................................................

9

Remote Control ......................................................................................

10

Installing the Batteries for the Remote Control..........................

10

DVD FUNCTIONS

 

Playback ..................................................................................

11

JPEG Playback .........................................................................

12

Kodak Picture CD.....................................................................

12

Transition Mode ......................................................................

13

Adjustment of Picture Size ......................................................

13

On-Screen Display ...................................................................

14

Search Functions .....................................................................

15

Using Track Search ................................................................................

15

Using Title / Chapter Search ..............................................................

15

Using Time Search.................................................................................

15

Marker Setting.........................................................................................

15

Repeat / Random / Programmed Playback ............................

16

Repeat Playback .....................................................................................

16

Repeat A-B Playback .............................................................................

16

Random Playback ..................................................................................

16

Programmed Playback.........................................................................

16

Special Settings .......................................................................

17

Subtitle Language..................................................................................

17

Audio Language.....................................................................................

17

Camera Angles........................................................................................

17

Black Level Setting.................................................................................

17

Stereo Sound Mode ..............................................................................

17

Virtual Surround .....................................................................................

17

DVD Setting .............................................................................

18

LANGUAGE Setting................................................................................

18

DISPLAY Setting......................................................................................

19

AUDIO Setting.........................................................................................

20

PARENTAL Setting .................................................................................

21

OTHERS Setting.......................................................................................

22

Reset to the Default Setting (Except for PARENTAL Setting) 23

INFORMATION

 

Troubleshooting Guide ...........................................................

23

Specifications ..........................................................................

24

Language Code List .................................................................

24

LIMITED WARRANTY................................................................

24

Español ....................................................................................

27

Quick Use Guide............................................................

Back Cover

Español INFORMATION DVD FUNCTIONS SETUP PRECAUTIONS

© 2009 Funai Electric Co., Ltd.

PRECAUTIONS

PRECAUTIONS

WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Make your contribution to the environment!!!

Used up batteries do not belong in the dust bin.

You can dispose of them at a collection point for used up batteries or special wastes. Contact your council for details.

For Customer Use:

Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this information for future reference.

Model No. ________________________

Serial No. ________________________

– 2 –

EN

PORTABLE CART WARNING (Symbol provided by RETAC)
S3125A

Important Safeguards

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain InstructionsThe safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Cleaning - Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments - Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

7.Water and MoistureDo not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this video product on an unstable cart, stand, tripod,

bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufac-

turer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered.

The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10.Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization - This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the video product due to lightning and power-line surges.

14.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15.Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16.Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

17.Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18.Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the video product.

c.If the video product has been exposed to rain or water.

d.If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

e.If the video product has been dropped or damaged in any way.

f.When the video product exhibits a distinct change in performance this indicates a need for service.

19.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform

safety checks to determine that the video product is in proper operating condition.

21.Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

– 3 –

PRECAUTIONS

EN

PRECAUTIONS

Location and Handling

Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit. Do not place this unit directly on top of the TV.

Depending on the TV, noise or disturbance of the picture and/or sound may be generated if this unit is placed too close to your TV. In this case, please ensure enough space between your TV and this unit.

Do not cover or place this unit in enclosed spaces to prevent excessive temperature build up.

Do not place this unit in direct sunlight, or near heat sources.

Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

Keep this unit away from strong magnetic objects.

Do not place any object containing water or other liquids on this unit. In the event that liquid should enter the cabinet, unplug this unit immediately and contact the retailer or an authorized service center immediately.

Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

Be sure to remove disc and unplug the AC power cord from the output before carrying this unit.

Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.

If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our authorized service center for servicing.

Moisture Condensation Warning

Moisture may form inside this unit under the following conditions:

Immediately after a heater is turned on.

In a steamy or humid room.

When this unit is suddenly moved from a cold to warm environment.

If moisture forms inside this unit, it may not operate properly or damage the disc. In such case, do not use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Outputs

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts

to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.

Symbols Used in this Manual

The following symbols appear in some headings in this manual. : Description refers to DVD-video.

: Description refers to audio CD.

: Description refers to CD-RW/-R with JPEG files.

Maintenance

Servicing

Please refer to relevant topics on the “Troubleshooting Guide” on page 23 before returning the product.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the Disc Lens

If this unit continues to perform improperly even after you have referred to the relevant sections and to the

“Troubleshooting Guide” in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

When you handle a disc, hold it by its edge and try not to touch the surface of the disc.

Always store the disc in its protective case when not in use.

©2009 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with thedesign is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

– 4 –

EN

About the Discs

Playable Discs

Type of

Mark (logo)

Region code

Recorded

Media size

 

 

Disc types

 

 

 

 

media

signals

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-video

 

or

 

 

 

 

 

 

 

 

 

PRECAUTIONS

*1, 2, 3, 5, 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-RW

 

 

 

5 inches

 

e.g.)

 

 

 

 

 

DVD-R

 

 

digital video

(12 cm)

 

title 1

 

title 2

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

*1, 3, 4, 5, 6,

 

 

(MPEG2)

 

chapter 1

chapter 2

chapter 3

chapter 4

chapter 1

chapter 2

 

 

3 inches

 

 

 

 

 

 

 

7, 8, 9, 10

 

 

 

 

 

 

 

 

 

 

 

 

 

(8 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD+RW

 

 

 

 

 

 

 

 

 

 

 

 

DVD+R

 

 

 

 

 

 

 

 

 

 

 

 

*1, 3, 4, 5, 8, 9

 

 

 

 

 

 

 

 

 

 

 

 

audio CD

 

 

 

 

audio CD

e.g.)

 

 

 

 

 

 

 

 

digital audio

 

 

 

 

 

 

 

 

 

*3, 5, 9

 

 

 

 

track 1

track 2

track 3

track 4

track 5

track 6

 

 

 

 

 

 

 

 

 

 

 

5 inches

 

 

 

 

 

 

 

 

CD-RW

 

 

digital audio

(12 cm)

 

 

 

 

 

 

 

 

 

 

or

JPEG

 

 

 

 

 

 

 

CD-R

 

 

or

e.g.)

 

 

 

 

 

 

 

 

3 inches

folder 1

 

folder 2

 

*3, 4, 5, 8, 9

 

 

JPEG

 

 

 

 

 

 

(8 cm)

 

file 1

file 2

file 3

file 4

file 5

file 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Kodak

 

 

JPEG

 

 

 

 

 

 

 

 

 

Picture CD

 

 

 

 

 

 

 

 

 

 

 

*3, 4, 5, 8, 9

 

 

 

 

 

 

 

 

 

 

 

 

is a trademark of DVD Format/Logo Licensing Corporation.

is trademark of Eastman Kodak Company.

If you cannot play back a disc which bears one of the marks above, check the following.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.

*3: Scratched or stained discs may not be played back.

*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.

*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*7: Only discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the picture or sound may not be smooth, etc.).

*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly. *9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.

*10: Discs recorded in the VR (video recording) format cannot be played back.

Unplayable Discs

NEVER play back the following discs as malfunction may result!

DVD-RAM, DVD-audio, CD-i, photo CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM for personal computers

On the following disc, the sound MAY NOT be heard. super audio CD

Note:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.

Any other discs without compatibility indications

– 5 –

EN

SETUP

SETUP

Connections

Connection to a TV

 

analog audio

standard picture

 

good picture

TV

AUDIO IN

VIDEO IN

 

S-VIDEO IN

 

 

 

 

 

L

 

 

 

 

R

and

or

or

 

 

 

RCA audio cable

RCA video cable

 

S-video cable

This unit

 

 

 

 

 

L

L

Y

L

 

Y

CR/PR

COMPONENT VIDEO OUT

 

 

 

 

 

COAXIAL

R

R

 

R

 

 

 

 

 

AUDIO

VIDEO

CB/PB

DIGITAL

HDMI OUT

 

 

OUT

OUT

AUDIO OUT

 

 

AUDIO

AUDIO

VIDEO

CB/PB

S-VIDEO

OUT

OUT

OUT

 

OUT

AUDIO OUT VIDEO OUT S-VIDEO OUT

Supplied cables used in this connection are as follows:

RCA audio cable (L/R) x 1

RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

better picture

COMPONENT

COMPONENT

VIDEO IN

VIDEO IN

Y

Y

CB or PB

CR PR

component video cable

L

 

Y

CR/PR COMPONENT VIDEO OUT

 

 

 

COAXIAL

 

R

 

 

 

 

AUDIO

VIDEO

CB/PB

DIGITAL

HDMI OUT

OUT

OUT

AUDIO OUT

 

 

COMPONENT

VIDEO OUT

Note:

Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;

You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to “ON” in “DISPLAY” menu. Refer to pages 18-20 for more details.

When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

If your TV is not compatible with progressive scanning;

Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on the front of the unit for more than 5 seconds.

After connecting to your TV:

You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.

Please refer to your TV’s owner’s manual for details.

Input modes for common TV brands:

Listed below are inputs for common brand name TV’s.

Admiral:

AUX

Panasonic:

TV/VIDEO

Curtis Mathis:

LINE1, LINE2, 00, 90, 91, 92, 93

RCA:

INPUT, TV/VCR, 00, 90, 91, 92, 93

GE:

INPUT, TV/VCR, 00, 90, 91, 92, 93

Samsung:

TV/VIDEO

Hitachi:

INPUT, AUX

Sanyo:

VIDEO

JVC:

VIDEO, VIDEO1, VIDEO2, VIDEO3

Sharp:

00

Kenwood:

AUX

Sony:

VIDEO1, VIDEO2, VIDEO3

LXI-Series:

00

Toshiba:

TV/GAME

Magnavox:

AUX CHANNEL

Zenith:

00

 

 

 

 

– 6 –

EN

Connection to a TV with an HDMI Compatible Port

A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) connector allows digital transfer of the digital images of DVD-video and other devices.

best picture

TV

HDMI IN

HDMI cable

This unit

HDMI OUT

When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 6.

Cables not included.

Please purchase the necessary cables at your local store.

Actual output modes by media

 

 

DOLBY DIGITAL Setting

 

 

 

 

 

Audio Recording Format

BITSTREAM *1

PCM

 

 

 

 

DVD-video

Dolby Digital

Dolby Digital

2channel PCM

 

 

 

LPCM

2channel PCM

2channel PCM

 

 

 

 

 

audio CD

2channel PCM

2channel PCM

 

 

 

 

*1 If the connected device is not compatible with HDMI BITSTREAM, signals are output on PCM.

Copyright protection system

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device.

This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

*HDMI: High Definition Multimedia Interface

Note:

When using an HDCP-incompatible display device, the image will not be viewed properly.

Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be controlled by another device via the HDMI connector.

The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the device that is connected.

Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this, audio signals are not output from the HDMI output connector.

When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

SETUP

– 7 –

EN

SETUP

Connection to an Audio System

Analog Audio Connection

 

 

 

Digital Audio Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

stereo system

 

 

 

 

Dolby Digital decoder,

Audio

 

 

 

 

 

 

 

 

 

 

 

 

MD deck or DAT deck

 

 

 

 

 

 

L R analog audio

 

 

 

 

COAXIAL

digital audio

 

 

 

 

 

 

 

 

 

 

input jacks

digital audio coaxial cable

 

 

 

input jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RCA audio cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

L

Y

CR/PR COMPONENT VIDEO OUT

 

 

COAXIAL

 

 

R

 

 

 

R

AUDIO

VIDEO

CB/PB

DIGITAL

HDMI OUT

OUT

OUT

AUDIO OUT

 

AUDIO

OUT

AUDIO OUT

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

This unit

 

 

HDMI OUT

 

 

 

DIGITAL AUDIO OUT

 

 

 

 

 

 

 

Setting SETUP > QUICK >

Connection

DOLBY DIGITAL

Connecting to a Dolby Digital decoder

 

BITSTREAM

for Dolby Digital audio output.

 

 

 

 

 

 

 

 

Connecting to other device (an MD deck

 

PCM

or DAT deck etc.) without Dolby Digital

 

decoder.

 

 

 

 

 

 

 

* To complete these settings, refer to pages 18-20.

Note:

The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.

By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

– 8 –

EN

Function Overview

Rear Terminals

1

2

 

 

 

3

L

Y

 

CR/PR COMPONENT VIDEO OUT

 

 

 

 

COAXIAL

 

 

R

 

 

 

 

 

AUDIO

VIDEO

CB/PB

DIGITAL

HDMI OUT

S-VIDEO

OUT

OUT

AUDIO OUT

OUT

 

 

6

 

5

 

4

1: AUDIO OUT jacks

Connect an RCA audio cable from here to the audio input jack of your television or audio device.

2: COMPONENT VIDEO OUT jacks

Connect a component video cable from here to the component video input jacks of your television.

3: S-VIDEO OUT jack

Connect an S-video cable from here to the S-video input jack of your television.

4: HDMI OUT jack

Connect an HDMI cable from here to the HDMI compatible port of a television or other display device.

5: DIGITAL AUDIO OUT COAXIAL jack

Connect a digital audio coaxial cable from here to the digital audio input jack of your digital audio receiver.

6: VIDEO OUT jack

Connect an RCA video cable from here to the video input jack of your television.

Note:

Please purchase the necessary cables at your local store.

(Refer to pages 6-8.)

Front Panel Indicator

SETUP

POWER

PLAY

HDMI

1 2 3

1POWER indicator

Lights up when power is on.

2PLAY indicator

Lights up when inserted disc is being played back. Blinks when an unplayable disc is inserted.

3HDMI indicator

Lights up when there is video signal output from the HDMI OUT jack.

HDMI Setup

 

Setting

SETUP > QUICK>

 

 

Video Output Signal

 

HDMI MODE

480 Progressive

 

480p

720 Progressive

720p

1080

Interlaced

1080i

 

 

 

1080

Progressive

1080p

* To complete these settings, refer to pages 18-19.

Note:

Video and audio signals may distorted temporarily when changing to/from the HDMI output mode.

Use a display with an HDMI-compatible port.

You can check the HDMI connection status by pressing [DISPLAY] during playback with the HDMI output mode (refer to page 14).

The HDMI mode that is not supported by display device is grayed in the settings.

If the TV is not compatible with newly selected HDMI output mode, press and hold [PLAY B] on the front of the unit for more than 5 seconds to reset the setting to default.

– 9 –

EN

+ 19 hidden pages