FUNAI DP100HH8A, DP100HH8A User Manual

6.47 Mb
Loading...

Owner’s Manual

Please read before using this unit.

DVD/CD Player

DP100HH8 A

Supplied Accessories

remote control

RCA audio/video

(NB094UD)

cables

batteries (AA x2)

(WPZ0102TM018/

 

WPZ0102LTE01)

owner’s manual (1VMN24994)

Owner's Manual

Connecting to RF Modulator (Not Supplied)

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using an RF modulator. In this case, follow the instructions below.

1)Disconnect the power cords of the devices from the AC outlet.

2)Make the connection as illustrated below.

3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.

4)Plug in the power cords of the devices to the AC outlet.

5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator.

rear of this unit

RCA video cable

L

 

R

rear of TV

 

VIDEO AUDIO

OUT OUT

 

RCA audio cable

 

 

 

ANT. IN

VHF / UHF

rear of your RF

 

modulator

 

 

antenna

 

 

 

 

 

 

 

 

 

 

 

 

 

RF coaxial cable

or

4

R

L

3

cable TV

RF coaxial

ANT. IN CHANNEL AUDIO IN VIDEO IN TO TV

cable

 

company

Set channel 3 or 4

 

 

 

Note:

RF modulator is not supplied with this unit. You need to purchase it at your local store.

The quality of picture may become poor if this unit is connected to an RF modulator.

If you need additional operating assistance after reading this owner’s manual, please call

TOLL FREE : 1-800-317-6062 or visit our web site at http://www.funai-corp.com

© 2008 Funai Electric Co., Ltd.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Contents

 

PRECAUTIONS

 

Important Safeguards ..................................................

.2

About the Discs ............................................................

.5

Playable Discs ................................................................

.5

Unplayable Discs............................................................

.5

SETUP

 

Connections..................................................................

.6

Connection to a TV.........................................................

.6

Connection to an Audio System.....................................

.7

Rear Terminals ...............................................................

.7

About the Remote Control...........................................

.8

Remote Control ..............................................................

.8

Installing the Batteries for the Remote Control

.............. .8

DVD FUNCTIONS

 

Playback ........................................................................

.9

MP3 Playback...............................................................

.10

Search Functions ........................................................

.10

Using Track Search.......................................................

.10

Using Title / Chapter Search .........................................

.10

Using Time Search........................................................

.10

On-Screen Display.......................................................

.11

Repeat / Random / Programmed Playback ...............

.12

Repeat Playback ...........................................................

.12

Repeat A-B Playback ....................................................

.12

Random Playback .........................................................

.12

Programmed Playback ..................................................

.12

Special Settings...........................................................

.13

Subtitle Language..........................................................

.13

Audio Language ............................................................

.13

Camera Angles..............................................................

.13

Black Level Setting........................................................

.13

Stereo Sound Mode.......................................................

.13

Virtual Surround.............................................................

.13

DVD Setting..................................................................

.14

LANGUAGE Setting ......................................................

.14

DISPLAY Setting ...........................................................

.15

AUDIO Setting ...............................................................

.15

PARENTAL Setting .......................................................

.16

OTHERS Setting ...........................................................

.16

Reset to the Default Setting

 

(Except for PARENTAL Setting)....................................

.17

INFORMATION

 

Troubleshooting Guide ...............................................

.17

Specifications ..............................................................

.18

LIMITED WARRANTY ..................................................

.18

Español.........................................................................

.19

Quick Use Guide............................................

Back Cover

Español INFORMATION DVD FUNCTIONS SETUP PRECAUTIONS

PRECAUTIONS

PRECAUTIONS

 

 

 

 

 

 

 

The model and serial numbers of this unit may be found on the cabinet.

Model No.:

 

 

You should record and retain those numbers for future reference.

 

 

Serial No.:

 

 

 

 

 

 

 

 

 

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

 

 

 

 

 

 

CAUTION

 

 

The lightning flash with arrowhead symbol, within an

 

 

 

equilateral triangle, is intended to alert the user to the

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

presence of uninsulated “dangerous voltage” within the

 

DO NOT OPEN

 

 

apparatus’s enclosure that may be of sufficient magnitude

 

 

 

 

to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

 

The exclamation point within an equilateral triangle is

SHOCK, DO NOT REMOVE COVER (OR BACK).

 

intended to alert the user to the presence of important

NO USER SERVICEABLE PARTS INSIDE. REFER

 

operating and maintenance (servicing) instructions in

SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

the literature accompanying the apparatus.

 

 

 

 

 

The caution marking is located on the rear or bottom of the cabinet.

Important Safeguards

1.READ INSTRUCTIONS - All the safety and operating instructions should be read before the apparatus is operated.

2.RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS - All warnings on the apparatus and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5.CLEANING - Unplug this apparatus from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: An apparatus that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the apparatus in the cleaning description otherwise required in item 5.

6.ATTACHMENTS - Do not use attachments not recommended by the apparatus manufacturer as they may cause hazards.

7.WATER AND MOISTURE - Do not use this apparatus near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.ACCESSORIES - Do not place this apparatus on an

unstable cart, stand, tripod, bracket, or table.The apparatus may fall, causing serious injury to someone, and serious damage to the apparatus. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the apparatus. Any mounting of the apparatus should follow the manufacturer’s instructions and should

use a mounting accessory recommended by the manufacturer. An apparatus and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the apparatus and cart combination to overturn.

AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9.VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the apparatus and to protect it from overheating, these openings must not be blocked or covered.The openings should never be blocked by placing the apparatus on a bed, sofa, carpet, rug, or other similar surface.This apparatus should never be placed near or over a radiator or heat register.This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCES - This apparatus should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your apparatus dealer or local power company. For the apparatus’s intended to operate from battery power, or other sources, refer to the operating instructions.

11.GROUNDING OR POLARIZATION - This apparatus is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the apparatus.

13.OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the apparatus, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/

NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

ANTENNA

LEAD

AS PER NATIONAL ELECTRICAL CODE

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

 

 

(NEC ART 250, PART H)

14.LIGHTNING - For added protection for this apparatus receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the apparatus due to lightning and power-line surges.

15.POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY - Never push objects of any kind into this apparatus through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus.

18.SERVICING - Do not attempt to service this apparatus yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the apparatus.

c.If the apparatus has been exposed to rain or water.

d.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation.

e.If the apparatus has been dropped or damaged in any way.

f.When the apparatus exhibits a distinct change in performance, this indicates a need for service.

20.REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.SAFETY CHECK - Upon completion of any service or repairs to this apparatus, ask the service technician to perform routine safety checks to determine that the apparatus is in proper operating condition.

22.HEAT - This apparatus should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

– 2 –

EN

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’au fond.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the apparatus and receiver.

3)Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam. LOCATION: Inside, near the deck mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

PRECAUTIONS

– 3 –

EN

PRECAUTIONS

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

Avoid a place with drastic temperature changes.

Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

TRADEMARK INFORMATION

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

is a trademark of DVD Format/Logo Licensing Corporation.

DEW CONDENSATION WARNING

Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry.

-The unit is moved from a cold place to a warm place.

-Under conditions of high humidity.

-After heating a cold room.

NOTE ABOUT RECYCLING

This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

SYMBOLS USED IN THIS MANUAL

The following symbols appear in some headings in this manual.

: Description refers to DVD-video.

: Description refers to audio CD.

: Description refers to CD-RW/-R with MP3 files.

MAINTENANCE

Servicing

Please refer to relevant topics on the “Troubleshooting Guide” on page 17 before returning the unit.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line mentioned on the front page to locate an authorized service center.

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the Disc Lens

If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting Guide” in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

When you handle a disc, hold it by its edge and try not to touch the surface of the disc.

Always store the disc in its protective case when not in use.

© 2008 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this

manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

– 4 –

EN

About the Discs

Playable Discs

Type of

Mark (logo)

Region code

Recorded

Disc

 

 

Disc types

 

 

 

 

media

signals

size

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-video

 

or

 

 

 

 

 

 

 

 

 

 

*1, 2, 4, 6, 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-RW

 

 

 

5 inches

 

e.g.)

 

 

 

 

 

PRECAUTIONS

DVD-R

 

 

digital video

(12 cm)

 

title 1

 

title 2

*1, 3, 4, 5, 6,

 

 

or

 

 

 

 

 

 

 

 

 

(MPEG2)

 

chapter 1

chapter 2

chapter 3

chapter 4

chapter 1

chapter 2

 

 

3 inches

 

7, 8, 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(8 cm)

 

 

 

 

 

 

 

DVD+RW

 

 

 

 

 

 

 

 

 

 

 

DVD+R

 

 

 

 

 

 

 

 

 

 

 

*1, 4, 5, 6,

 

 

 

 

 

 

 

 

 

 

 

8, 9

 

 

 

 

 

 

 

 

 

 

 

audio CD

 

 

digital audio

 

audio CD

e.g.)

 

 

 

 

 

 

*4, 6, 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

track 1

track 2

track 3

track 4

track 5

track 6

 

 

 

 

 

 

 

 

 

 

 

 

5 inches

 

 

 

 

 

 

 

 

 

 

 

 

(12 cm)

 

 

 

 

 

 

 

 

CD-RW

 

 

digital audio

or

MP3

 

 

 

 

 

 

 

 

 

3 inches

e.g.)

folder 1

 

folder 2

 

CD-R

 

 

or

(8 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*4, 5, 6, 8, 9,

 

 

MP3

 

 

file 1

file 2

file 3

file 4

file 1

file 2

 

 

 

 

 

 

 

 

 

 

 

 

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers. *3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be smooth, etc.

*8: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back. *9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.

Unplayable Discs

NEVER play back the following discs as malfunction may result!

DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc

On the following disc, the sound MAY NOT be heard. super audio CD

Any other discs without compatibility indications

Note:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.

– 5 –

EN

+ 15 hidden pages