FUNAI Catalyst 48 User Manual

Size:
259.82 Kb
Download

CATALYST48

UNIVERSAL REMOTE CONTROL

USER GUIDE

INTRODUCTION

The Catalyst™ 48 Universal Remote Control, developed by Universal Electronics, Inc. for Funai, is the complete solution for all of your remote control requirements. It is designed to operate from four to eight devices with the emphasis on features and functions of your dedicated component(s).

The Catalyst 48 requires two (2) fresh AA alkaline batteries (not included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep these instructions for future reference.

FEATURES AND FUNCTIONS

Use the Key Charts to learn how the Catalyst 48 functions.

Key Charts

The LED (red light) blinks to show that the remote control is working and is sending signals.

Use SETUP for all programming sequences.

Press PWR once to turn on or off the selected home entertainment component.

Press AUX,CBL,VCR,TV,SAT,CD,AMP, or

TNR once to select a home entertainment component to control.

Use the keypad (0 ~ 9) to directly select channels (for example, 09 or 31).

Press MUTE once to turn sound off

or on.

Press ENTER once after entering channel numbers on some TV models.

Use VOL +(or VOL-) to raise (or lower) the sound volume.

Use CH + (orCH -)to select the next higher (or lower) channel.

Press LAST once to recall the last channel and to page back one screen in the

main menu.

Press SLEEP to activate your TV’s sleep timer. Or if none is available, pressSLEEP to activate the Catalyst 48’s sleep timer for automaticshut-offof your TV. Each key press (up to four) add 15 minutes to the sleep timer.

Press INPUT once to switch the input of the chosen component.

Use GUIDE to display the program guide.

Use EXIT to exit out of the selected component’s menu or guide.

Use the cursor keys to move the cursor in the program guide and menu screens.

Use SELECT to choose options from your selected component’s menu or guide.

Use INFO to display current channel and program information.

Press MENU to access the menu of your chosen component.

Use the transport keys to control your VCR, or CD or DVD player.

Use these keys for specific features on your dedicated components.

INSTALLING BATTERIES

1.On the back of the Catalyst 48, push the tab and lift off the battery cover.

2.Obtain two (2) fully-chargedAA alkaline batteries. Match the + and – marks on the batteries to the + and

– marks in the battery case, then insert the new batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

4.Test the unit by pressing PWR and any mode key (e.g.,AUX,CBL,VCR, etc.). If the batteries are inserted correctly, the LED will blink once.

NOTE: When batteries need replacement, the Catalyst 48 will blink twice with every key press. Simply replace them and the remote control will be restored to its full functionality, including favorite settings.

PROGRAMMING

COMPONENT CONTROL

The Catalyst 48 can control up to eight different components. Perform the following instructions for each component you want controlled:

NOTE: For TV/VCR Combo control, see the next section.

1.Turn on a component (e.g.,VCR) and, if applicable, insert media, (e.g., cassette or disc).

NOTE: Please read steps 2-4completely before proceeding. We recommend highlighting or writing down the codes and device you wish to program before moving onto step 2.

2.On the Catalyst 48, press a component key once (i.e., AUX,CBL,VCR,TV,SAT,CD,AMP, orTNR). Press and holdSETUP until the LED blinks twice, then releaseSETUP.

3.Use the Manufacturer’s Codes(on the back side) to locate the the type of component and brand name and then enter the first four-digit code for your component. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the Catalyst 48 at the component and press PWR once. It should turn off. If it does not respond, repeat steps2-3,trying each code for your brand until you find one that works. If it still does not work, try searching for the code (seeSearching For Your Code).

NOTE: If the device does not have a PWR key, press PLAY.

5.Repeat steps 1 through 4 for each component you want the Catalyst 48 to control.

PROGRAMMING

TV/VCR COMBO CONTROL

Perform the following instructions to control a TV/VCR Combo:

1.Turn on the TV/VCR Combo and insert a video cassette.

NOTE: Please read steps 2-4completely before proceeding. We recommend highlighting or writing down the code for the brand you wish to program before moving onto step 2.

2.On the Catalyst 48, press VCR. Press and holdSETUP until the LED blinks twice, then releaseSETUP.

3.Use the Setup Codes For TV/VCR Combos(on the back side) to locate the brand name and then enter the first four-digit code for your component. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the Catalyst 48 at the component and press PWR once. It should turn off. If it does not respond, repeat steps2-3,trying each code for your brand until you find one that works. If it still does not work, try searching for the code (seeSearching For Your Code).

NOTE: If the device does not have a PWR key, press PLAY.

5.If you’ve located a setup code that works, but it has a separate TV code, you’ll also need to program it into the Catalyst 48 to access volume control as follows:

a.Press TV once. The LED will blink twice.

b.Enter the TV code for your TV/VCR Combo. If correct, the LED will blink twice.

If there is no separate TV code listed, you will need to perform the following steps to access volume control:

a.Press and hold SETUP until the LED blinks twice, then release

SETUP.

b.Enter 9 - 9 - 3 . The LED will blink twice.

c.Press VCR once. The LED will blink twice.

SEARCHING FOR YOUR CODE

If your device does not respond to the Catalyst 48 after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV:

1.On the Catalyst 48, press TV once.

2.Press and hold SETUP until the LED blinks twice, then releaseSETUP.

3.Enter 9 -9 -1. The LED will blink twice.

4.Aim the remote control at the the TV and slowly alternate between pressing PWR andTV. Stop when the TV turns off.

NOTE: In the search mode, the Catalyst 48 will send IR codes from its library to the selected device, starting with the most popular code first.

5.Press SETUP once to lock in the code.

6.To search for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., AUX,CBL,VCR,SAT,CD,AMP, or

TNR) for the (Auxiliary,VCR, Cable, Satellite, CD, Amplifier, or Tuner) component you are searching for.

CHECKING THE CODES

If you have set up the Catalyst 48 using the Searching For Your Code procedure, you may need to find out which fourdigit code is operating your equipment:

For example, to find out which code is operating your TV:

1.On the Catalyst 48, press TV once.

2.Press and hold SETUP until the LED blinks twice, then releaseSETUP.

3.Enter 9 -9 -0. The LED will blink twice.

4.To view the code for the first digit, press 1 once.Wait 3 seconds, count the LED blinks (e.g., 3 blinks = 3) and write down the number.

NOTE: If a code digit is “0”, the LED will not blink.

5.Repeat step 4 three more times for remaining digits. Use 2 for the second digit,3 for the third digit, and4 for the fourth digit.

6.To check for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., AUX,CBL,VCR,SAT,CD,AMP, or

TNR) component you are checking. As before, write down each fourdigit code.

RE-ASSIGNINGDEVICE KEYS

The Catalyst 48 can be set up to control a second TV or VCR, or any combination of eight home entertainment components.

For example, to have the Catalyst 48 control a TV, a Cable Converter, and two VCRs, you will need to re-assignthe unusedAUX key to operate the second VCR as follows:

1.On the Catalyst 48, press and hold SETUP until the LED blinks twice, then releaseSETUP.

2.Enter 9 -9 -2. The LED will blink twice.

3.Press VCR once, then pressAUX once.

4.The AUX key is now ready to be programmed for your second VCR. See

Programming Component Control.

To re-assignother device keys, repeat steps 1 through 4 by substituting the key sequence from the below chart for the most popular components:

To Re-AssignKey

 

Sequence

Perform

TV as 2nd VCR key:

SETUP - 9- 9

 

- 2- VCR- TV

TV as 2nd CBL key:

SETUP - 9- 9

 

- 2- CBL- TV

TV as 2nd AUX key:

SETUP - 9- 9

 

- 2- AUX- TV

TV as 2nd TNR key:

SETUP - 9- 9

 

- 2- TNR- TV

TV as 2nd AMP key:

SETUP - 9- 9

 

- 2- AMP- TV

TV as 2nd CD key:

SETUP - 9- 9

 

- 2- CD- TV

TV as 2nd SAT key:

SETUP - 9- 9

 

- 2- SAT- TV

TV back toTV:

SETUP - 9- 9

 

- 2- TV- TV

VCR as 2nd TV key:

SETUP - 9- 9

 

- 2- TV- VCR

VCR as 2nd CBL key:

SETUP - 9- 9

 

- 2- CBL- VCR

VCR as 2nd AUX key:

SETUP - 9- 9

 

- 2- AUX- VCR

VCR as 2nd TNR key:

SETUP - 9- 9

 

- 2- TNR- VCR

VCR as 2nd AMP key:

SETUP - 9- 9

 

- 2- AMP- VCR

VCR as 2nd CD key:

SETUP - 9- 9

 

- 2- CD- VCR

VCR as 2nd SAT key:

SETUP - 9- 9

 

- 2- SAT- VCR

VCR back toVCR:

SETUP - 9- 9

 

- 2- VCR- VCR

AUX as 2nd TV key:

SETUP - 9- 9

 

- 2- TV- AUX

AUX as 2nd VCR key:

SETUP - 9- 9

 

- 2- VCR- AUX

AUX as 2nd CBL key:

SETUP - 9- 9

 

- 2- CBL- AUX

AUX as 2nd TNR key:

SETUP - 9- 9

 

- 2- TNR- AUX

AUX as 2nd AMP key:

SETUP - 9- 9

 

- 2- AMP- AUX

AUX as 2nd CD key:

SETUP - 9- 9

 

- 2- CD- AUX

AUX as 2nd SAT key:

SETUP - 9- 9

 

- 2- SAT- AUX

AUX back toAUX:

SETUP - 9- 9

 

- 2- AUX- AUX

When a re-assignmentis done, the LED will blink twice to confirm your choice. At that time, you will need to program the Catalyst 48 to control the new component (seeProgramming Component Control).

CHANGING VOLUME LOCK

The Catalyst 48 is set to control volume of a component through your TV while in the TV,VCR, Cable, or Satellite mode. However, in an Audio mode (i.e., TNR,AMP, orCD), you have separate control of your audio component’s volume.

If your TV is not remote controllable, or if you want volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a non-associatedmode (e.g., through the cable in the TV mode).

To change Volume Lock to the another mode:

1.On the Catalyst 48, press and hold SETUP until the LED blinks twice, then releaseSETUP.

2.Enter 9 -9 -3 and then press any mode key once (exceptTV). The LED will blink twice.

3.Now, whenever you press VOL +,VOL ,orMUTE, volume will be controlled by your mode choice.

To change Volume Lock back to the TV mode:

1.On the Catalyst 48, press and hold SETUP until the LED blinks twice, then releaseSETUP.

2.Enter 9 -9 -3 and then pressTV. The LED will blink twice.

3.Now, whenever you press VOL +,VOL ,orMUTE on the Catalyst 48, volume will be controlled by your TV.

TROUBLESHOOTING

PROBLEM: LED does not blink when you press a key.

SOLUTION: Replace the batteries with two (2) new AA alkaline batteries.

PROBLEM: LED blinks when you press a key, but home entertainment component does not respond.

SOLUTION: Make sure the Catalyst 48 is aimed at your home entertainment component and is not farther than 15 feet away.

PROBLEM: Catalyst 48 does not control home entertainment components or commands are not working properly.

SOLUTION: Try all listed codes for the component brands being set up. Make sure they can be operated with an infrared remote control.

PROBLEM: TV/VCR combo does not respond properly.

SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation.

PROBLEM: No volume on a 2nd TV.

SOLUTION: Follow instructions in

Changing Volume Lock.

PROBLEM: CH+ ,CH- ,andLAST do not work for your RCA TV.

SOLUTION: Due to RCA design (19831987), only the original remote control will operate these functions.

PROBLEM: Changing channels does not work properly.

SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the Catalyst 48 after entering the channel number.

PROBLEM: Tried “Search Method” and still could not find a working code.

SOLUTION: Try the “Search Method” again after clearing out the device key as follows: Press and hold SETUP until the red light blinks twice, then release. Next enter9 -9 -2. Then press and release the device key to be cleared twice.

Continued on back...

TROUBLESHOOTING (CONT’D)

PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.

SOLUTION: For power on, these products require programming TV codes. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.

MANUFACTURER’S CODES

Setup Codes for Audio Amplifiers:

GE

0078

Harman/Kardon

0892

JVC

0331

Marantz

0892

Optimus

0395

Philips

0892

Polk Audio

0892

Realistic

0395

Sony

0689

Soundesign

0078

Victor

0331

Wards

0078

Yamaha

0354

Setup Codes for Audio Receivers or Tuners :

ADC

0531

Aiwa

0121, 1405, 1089

Capetronic

0531

Carver

1089, 1189

Denon

1160, 1104

Harman/Kardon

0110

JBL

0110

JVC

0074

Kenwood

1027, 0186, 1313, 1569, 1570

MCS

0039

Magnavox

1089, 0531, 1189

Marantz

1189, 1089, 0039

Onkyo

0135

Optimus

1023, 0186, 0531, 0670

Panasonic

0039, 1518

Philips

1089, 1189, 1269

Pioneer

0150, 0531, 0630, 1023

Proscan

1254

Quasar

0039

RCA

1254, 0531, 1023

Sansui

1089

Sharp

0186

Sony

1158, 1058, 1258

Soundesign

0670

Sunfire

1313

Technics

0039, 1308, 1518, 1309

Thorens

1189

Victor

0074

Yamaha

0176, 0186, 1176

Setup Codes for Cable Coverters:

ABC

0003, 0017

Americast

0899

Bell South

0899

General Instrument

0276, 0476, 0810

GoldStar

0144

Hamlin

0009, 0273

Jerrold

0003, 0276, 0476, 0810

Memorex

0000

Motorola

1106

Pace

0237

Panasonic

0107, 0000

Paragon

0000

Philips

0305, 0317

Pioneer

0144, 0533, 0877

Pulsar

0000

Quasar

0000

Regal

0273, 0279

Runco

0000

Samsung

0144

Scientific Atlanta

0017, 0477, 0877

Starcom

0003

Toshiba

0000

Zenith

0000, 0525, 0899

Setup Codes for CD Players:

Aiwa

0157

Burmester

0420

Cal.Audio Labs

0029

Carver

0157, 0179

DKK

0000

Denon

0003, 0873

Emerson

0305

Fisher

0179

Garrard

0420

Genexxa

0032, 0305

Harman/Kardon

0157, 0173

Hitachi

0032

JVC

0072

Kenwood

0028, 0190, 0826, 0037, 0626, 0681

Krell

0157

LXI

0305

Linn

0157

MCS

0029

MTC

0420

Magnavox

0157, 0305

Marantz

0157, 0626, 0029

Mission

0157

NSM

0157

Onkyo

0101, 0868

Optimus

0032, 0468, 0420, 0179, 0305, 1063,

 

0000, 0037, 0145

Panasonic

0029

Parasound

0420

Philips

0157, 0626

Pioneer

0032, 0468, 0305, 1062, 1063

Polk Audio

0157

Proton

0157

QED

0157

Quasar

0029

RCA

0053, 0032, 1062, 0468, 0305, 0179

Realistic

0179, 0420

Rotel

0157, 0420

SAE

0157

Sansui

0157, 0305

Sanyo

0179

Scott

0305

Sears

0305

Sharp

0037, 0861

Sherwood

1067

Sonic Frontiers

0157

Sony

0000, 0490

Soundesign

0145

Tascam

0420

Teac

0420

Technics

0029

Victor

0072

Wards

0053, 0157

Yamaha

0036, 0888

Setup Codes for DVD Players:

Apex

0672

Denon

0490

Emerson

0675, 0821

Fisher

0670

FUNAI

0675, 1334

GE

0522

Gradiente

0651

Hitachi

0573, 0664

Hiteker

0672

JVC

0623, 0558

Kenwood

0682, 0534

Konka

0719, 0711, 0720, 0721

Magnavox

0675, 0821, 0503, 0675

Marantz

0539

Mitsubishi

0521

Onkyo

0503

Optimus

0571

Oritron

0651

Panasonic

0490, 0677, 0632

Philips

0539, 0503

Pioneer

0571, 0525, 0632

Proscan

0522

RCA

0522, 0571

Samsung

0573

Sharp

0630

Sony

0533

Superscan

0821

Sylvania

0675, 0821

Symphonic

0675

Technics

0490

Theta Digital

0571

Toshiba

0503

Yamaha

0490, 0545

Zenith

0591, 0503

Setup Codes for DVD Player/ VCR Combos:

Sylvania 0593

Symphonic 0675

Setup Codes for Home Automation:

GE

0240

One For All

0167

Radio Shack

0240

Security System

0167

Universal X10

0167

X10

0167

Setup Codes for Satellite Receivers:

AlphaStar

0772

Chaparral

0216

Echostar

0775, 1005

Expressvu

0775

GE

0566

General Instrument

0869

HTS

0775

Hitachi

0819

Hughes Net. Sys.

0749, 1142, 1749

JVC

0775

Magnavox

0722, 0724

Memorex

0724

Mitsubishi

0749

Next Level

0869

Panasonic

0247, 0701

Philips

1076, 1142, 0722, 0724, 0749

Proscan

0392

RCA

0566, 0392, 0143, 0855

Radio Shack

0869

Samsung

1109

Sony

0639

Star Choice

0869

Toshiba

0749, 0790

Uniden

0724, 0722

Zenith

0856

Setup Codes for TVs:

AOC

0019, 0030

Admiral

0093, 0463

Aiko

0092

Aiwa

0701

Akai

0030

Alaron

0179

America Action

0180

Anam

0180

Audiovox

0092, 0180, 0451, 0623

Baysonic

0180

Belcor

0019

Bell & Howell

0016, 0154

Bradford

0180

Brockwood

0019

Broksonic

0236, 0463

CXC

0180

Candle

0030, 0056

Carnivale

0030

Carver

0054

Celebrity

0000

Cineral

0451, 0092

Citizen

0056, 0030, 0060, 0092

Concerto

0056

Contec

0180

Craig

0180

Crosley

0054

Crown

0180

Curtis Mathes

0060, 0030, 0016, 0047, 0051, 0054,

 

0056, 0093, 0145, 0154, 0166, 0451,

 

1147, 1347

Daewoo

0092, 0623, 0019, 0624, 0451

Daytron

0019

Denon

0145

Dumont

0017, 0019

Durabrand

0171

Electroband

0000

Emerson

0171, 0236, 0180, 0178, 0179, 0463,

 

0624, 0623, 0019, 0154

Envision

0030

Fisher

0154

Fujitsu

0179, 0683

FUNAI

0171, 1271, 0180, 0179

Futuretech

0180

GE

0047, 1347, 0051, 0178, 0451, 1147,

 

0093

Gibralter

0017, 0019, 0030

GoldStar

0178, 0019, 0030, 0056

Gradiente

0056, 0053

Grunpy

0179, 0180

Hallmark

0178

Harley Davidson

0179

Harman/Kardon

0054

Harvard

0180

Hitachi

0145, 0056, 0016

Infinity

0054

Inteq

0017

JBL

0054

JCB

0000

JVC

0053

KEC

0180

KTV

0180, 0030

Kenwood

0030, 0019

Konka

0707, 0632, 0628, 0638, 0703

LG

0056

LXI

0154, 0047, 0054, 0156, 0178

Logik

0016

Luxman

0056

MGA

0150, 0019, 0030, 0178

MTC

0060, 0030, 0019, 0056

Magnavox

0054, 0030, 0179, 1254

Majestic

0016

Marantz

0054, 0030

Matsushita

0250

Megatron

0145, 0178

Memorex

0179, 0463, 0178, 0016, 0056, 0150,

 

0154, 0250

Midland

0017, 0047, 0051

Mitsubishi

0150, 0178, 0019, 0093

Motorola

0093

Multitech

0180

NAD

0156, 0166, 0178

NEC

0030, 0019, 0056

NTC

0092

Nikko

0178, 0030, 0092

Onwa

0180

Optimus

0250, 0166, 0154

Optonica

0093

Orion

0463, 0179, 0236

Panasonic

0051, 0250

Penney

0047, 1347, 0060, 0030, 0178, 0051,

 

0019, 0056, 0156

Philco

0145, 0019, 0030, 0054, 0463

Philips

0054

Pilot

0019, 0030

Pioneer

0166, 0679

Portland

0019, 0092

Princeton

0717

Prism

0051

Proscan

0047

Proton

0178

Pulsar

0017, 0019

Quasar

0051, 0250

RCA

0047, 1347, 1147, 0679, 1247, 0019,

 

0051, 0090, 0093, 1047, 1447

RadioShack

0180, 0030, 0178, 0154, 0019, 0047,

 

0056

Realistic

0180, 0154, 0030, 0178, 0019, 0056

Runco

0017, 0030

SSS

0019, 0180

Sampo

0030

Samsung

0060, 0019, 0178, 0030, 0056

Sansei

0451

Sansui

0463

Sanyo

0154

Scimitsu

0019

Scotch

0178

Scott

0236, 0019, 0178, 0179, 0180

Sears

0171, 0154, 0056, 0156, 0047, 0054,

 

0178, 0179

Semivox

0180

Semp

0156

Sharp

0093, 0688

Shogun

0019

Signature

0016

Sony

0000

Soundesign

0178, 0179, 0180

Squareview

0171

Starlite

0180

Supreme

0000

Sylvania

0171, 0054, 0030

Symphonic

0171, 0180

TMK

0056, 0178

TNCi

0017

Tandy

0093

Technics

0051, 0250

Technol Ace

0179

Techwood

0051, 0056

Teknika

0016, 0054, 0179, 0180, 0019, 0092,

 

0056, 0060, 0150

Telefunken

0056

Toshiba

0156, 0060, 0154, 1256

Vector Research

0030

Victor

0053

Vidikron

0054

Vidtech

0019, 0178

Wards

0054, 0178, 0016, 0019, 0030, 0056,

 

0179

White Westinghouse

0624, 0623, 0463

Yamaha

0019, 0030

Zenith

0017, 0624, 0016, 0092, 0463

Setup Codes for TV/DVD Player Combos:

Sylvania

0171, 0675

Setup Codes for TV/VCR Combos:

American High

0035

(for TV use 0051)

Brocksonic

0002, 0294,

Colt

0072

 

Curtis Mathis

0035

(for TV use 0051)

Daewoo

0278

 

Emerson

0002, 0294, 0479

FUNAI

0000

 

GE

0035

(for TV use 0051),

 

0060

(for TV use 0047),

 

0048

(for TV use 0093), 0240

Hitachi

0035

(for TV use 0051), 0000

HQ

0000

 

Lloyd’s

0000

 

MGA

0240

 

Magnasonic

0593

 

Magnavox

0593, 0081 (for TV use 0054),

 

0035

(for TV use 0051), 0000

Magnin

0240

 

Memorex

0037, 0162 (for TV use 0250)

Mitsubishi

0048

(for TV use 0093)

Optimus

0593

 

Orion

0002, 0294, 0479

Panasonic

0035

(for TV use 0051),

 

0162

(for TV use 0250)

Penney

0035

(for TV use 0051), 0240,

 

0162

(for TV use 0250)

Quasar

0035

(for TV use 0051),

 

0162

(for TV use 0250)

RCA

0060

(for TV use 0047),

 

0035

(for TV use 0051),

 

0048

(for TV use 0093)

Sansui

0000, 0479

Sanyo

0240

 

Sears

0000, 0037

Sharp

0048 (for TV use 0093)

Sony

0032

(for TV use 0000)

Symphonic

0593, 0000

Zenith

0000

 

Setup Codes for TV/VCR/DVD Player Combos:

Emerson

0821, 1334

FUNAI

1334

Magnavox

0821

Superscan

0821

Sylvania

0821, 1334

Setup Codes for VCRs:

Admiral

0048, 0209

Adventura

0000

Aiko

0278

Aiwa

0000, 0037

America Action

0278

American High

0035

Asha

0240

Audiovox

0037

Beaumark

0240

Bell & Howell

0104

Broksonic

0121, 0184, 0002, 0209, 0479

CCE

0072, 0278

Calix

0037

Canon

0035

Carver

0081

Cineral

0278

Citizen

0278, 0037

Colt

0072

Craig

0037, 0072, 0047, 0240

Curtis Mathes

0035, 0060, 0162

Cybernex

0240

Daewoo

0278, 0045

Denon

0042

Dynatech

0000

Electrohome

0037

Electrophonic

0037

Emerex

0032

Emerson

1593, 0184, 0002, 0209, 0278, 0121,

 

0479, 0000, 0037, 0043

Fisher

0047, 0104

Fuji

0033, 0035

FUNAI

1593, 0000

GE

0035, 0060, 0048, 0240

Garrard

0000

Go Video

0432

GoldStar

0037, 0038

Gradiente

0000

HI-Q

0047

Harley Davidson

0000

Harman/Kardon

0038, 0081

Harwood

0072

Hitachi

0042, 0000

Hughes Net. Sys.

0042

JVC

0067

KEC

0037, 0278

KLH

0072

Kenwood

0067, 0038

Kodak

0035, 0037

LXI

0037

Lloyd’s

0000

Logik

0072

MEI

0035

MGA

0043, 0240

MGN Technology

0240

MTC

0000, 0240

Magnasonic

0593, 0278

Magnavox

0593, 0035, 0081, 0563, 0000, 0039,

 

0149

Magnin

0240

Marantz

0081, 0035

Marta

0037

Matsushita

0035, 0162

Memorex

0104, 0047, 0479, 0000, 0037, 0048,

 

0035, 0240, 1037, 0039, 0162, 0209,

 

1162, 1262

Minolta

0042

Mitsubishi

0043, 0048, 0067

Motorola

0035, 0048

Multitech

0000, 0072

NEC

0038, 0067, 0104

Nikko

0037

Noblex

0240

Olympus

0035

Optimus

0593, 0162, 1062, 1162, 0048, 1262,

 

0037, 1048, 0104, 0432

Orion

0479, 0002, 0184, 0209

Panasonic

0035, 0162, 1162, 1262, 1362, 0616,

 

1062

Penney

0035, 0240, 0037, 0042, 0038

Pentax

0042

Philco

0035, 0209, 0479

Philips

0081, 0035, 0618, 1081, 1181

Pilot

0037

Pioneer

0067

Polk Audio

0081

Profitronic

0240

Proscan

0060

Protec

0072

Pulsar

0039

Quasar

0035, 0162, 1162

RCA

0060, 0149, 0042, 0035, 0048, 0240

RadioShack

0000, 1037

Radix

0037

Randex

0037

Realistic

0000, 0104, 0047, 0048, 0037, 0035

ReplayTV

0614, 0616

Runco

0039

STS

0042

Samsung

0045, 0240

Sanky

0039, 0048

Sansui

0479, 0000, 0067, 0209

Sanyo

0047, 0104, 0240

Scott

0184, 0121, 0043, 0045

Sears

0037, 0042, 0000, 0035, 0047, 0104

Semp

0045

Sharp

0048

Shintom

0072

Shogun

0240

Singer

0072

Sony

0033, 0032, 0000, 0035, 0636, 1032

Sylvania

0593, 1593, 0035, 0081, 0000, 0043

Symphonic

1593, 0593, 0000

TMK

0240

Teac

0000

Technics

0035, 0162

Teknika

0000, 0035, 0037

Thomas

0000

Tivo

0618, 0636

Toshiba

0045, 0043

Totevision

0037, 0240

Unitech

0240

Vector

0045

Vector Research

0038

Video Concepts

0045

Videosonic

0240

Wards

0035, 0060, 0000, 0047, 0240, 0042,

 

0048, 0072, 0081, 0149

White Westinghouse

0072, 0278, 0209

XR-1000

0072, 0000, 0035

Yamaha

0038

Zenith

0039, 0000, 0033, 0209, 0479

Setup Codes for Video Accessories:

Panasonic

1120

Pioneer

1010

Sensory Science

1126

Sharp

1010

Sylvania

1563

ADDITIONAL INFORMATION

The Catalyst 48 does not have any user-serviceableparts. Opening the case, except for the battery cover, may cause permanent damage to your Catalyst 48.

©2004 by Universal Electronics, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics, Inc.

M4800A

09/04