Fujitsu Q552 Getting Started Guide

0 (0)

Getting Started

Get Started with Your

STYLISTIC® Q552 Tablet PC

This guide will lead you through the start-up process for your new STYLISTIC Tablet PC and will also provide some valuable tips. To learn about all the exciting features that your new STYLISTIC Tablet PC has to offer, please see the User’s Guide that can be accessed after completing the start-up procedure.

Ce guide pratique vous explique comment mettre en marche votre nouveau PC Tablette STYLISTIC et vous propose quelques conseils utiles. Pour savoir comment profiter des fonctionnalités inédites dont dispose votre nouveau PC Tablette, veuillez consulter le guide d’utilisation. Vous pourrez y accéder après avoir effectué la procédure de démarrage initial.

ENGLISH * FRANÇAIS

This convenient guide will lead you through the start-up process and will also offer some valuable tips.

What’s in the Box

Check to see that all of the following items are in the box:

■■ STYLISTIC Tablet PC

■■ Getting Started Guide

■■ Warranty

■■ Removable Battery

■■ AC Adapter

■■ AC Cable

■■ Pen Kit

■■ Pen-tether

■■ Cleaning Cloth

Depending upon your configuration, the following items may also be shipped with your notebook:

■■ Recovery/ Bootable disc

■■ Microsoft Product Identifier (bi-fold paper contains Microsoft Office product key for activation.

Controls, Connectors, and

Access Points

Display

Front Web Camera

Pen Tether

Attachment Point

 

Wireless Device Switch

 

Application Buttons

Docking Cradle Connector

 

Speaker

Status Indicators

 

DC Input Connector Power/Suspend/Resume Switch

BACK PANEL

Battery Release Latches

Rear Web Camera

 

SD Card Slot

 

Fingerprint Sensor

 

Built-in Microphone

 

USB 2.0 Port

 

SmartCard Slot

 

Line Out/Headphone Jack

Built-in Microphone

HDMI Port

 

Removable Battery

2

Fujitsu Q552 Getting Started Guide

Initial Start Up

Installing a Pen Tether

Pen Cap

AAAA Battery

Pen Barrel

AC Adaptor

DC Power Jack

Wireless Device Switch

Power Suspend/Resume

Switch

1.Install the AAAA-battery into the pen (see diagram on blister pack) and install

the Pen Tether

■■Push one end of the tether under the slot on the top of the pen, and then thread the opposite end of the tether through the loop.

■■Insert the other end of the pen tether through the attachment point on the STYLISTIC® Tablet PC, and feed the pen through the large loop in the tether.

The lithium polymer battery is not charged upon purchase. You will need to connect the ac adapter to charge your battery or use your stylistic Tablet pc. It will take approximately 5 hours to initially charge the battery.

There is an indicator on the battery. The indicator color means: Green: 50% - 100% charge, Orange: 49% - 10% charge, Red: under 10% charge.

2. Connect AC Power

■■Be sure that you have the battery installed.

■■Plug the AC cord into the AC Adapter.

■■Plug the DC output cable into the DC power jack of your Tablet PC.

■■Plug the AC adapter into an AC electrical outlet.

3. Turn on Power

■■Slide and release the Power/Suspend/Resume switch.

■■The STYLISTIC Q552 Tablet is now on and the battery is being charged.

■■The Tablet will begin a power-on self test. Once successfully completed, the operating system will begin the initialization process.

4. Starting Windows® for the First Time

■■Accept the Microsoft® Windows® Licensing Agreement and the Fujitsu End User License Agreement to proceed. Select your User ID and Password during the “Welcome Screen.” Keep a record of your User ID and password stored in a secure place. THE SCREEN WILL GO DARK FOR SEVERAL MINUTES. Do not attempt to turn power on or off during this stage.

5. Connect to the Internet or Network

■■Ensure the Wireless Device Switch is “On.”

■■Register your Tablet with Fujitsu Service and Support via our website (http://solutions.us.fujitsu.com/www/ content/support/).

This helps us to better serve you.

Before starting next step, check to be sure that your Tablet is NOT connected to a network or the Internet.

6. Activate Additional Utilities, Applications, & Drivers

■■You can launch desktop icon “Fujitsu Bonus Apps” to see if there are any additional application available for the system. Bonus Apps contains optional applications. You can select individual or all software that is available. BonusApps will automatically install for you.

3

7. User’s Guide

■■Your electronic User’s Guide contains important detailed information about your new computer. You can access your User’s Guide by selecting its icon from the screen desktop.

■■The User’s Guide will be copied to your hard drive in the C:\Fujitsu\Manual directory. Shortcuts to the User’s Guide will be placed on your desktop and in the Start menu.

8. Calibrating the Display

In order to ensure accurate tracking between the stylus and cursor, run the

Calibration Utility before you use the system for the first time, or after you change the display resolution. To run the calibration utility:

■■Go to Start -> Control Panel.

■■Double-click the [Tablet PC Settings] icon and select the Display tab.

■■Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input.

■■Adjust the display of your Tablet PC to a comfortable angle and find the

(+) symbol in the upper-left corner of the display.

■■Using the stylus or your finger (depending upon which type of input you are calibrating), touch the screen directly on the (+) symbol. Lift your stylus/finger from the screen and the target will move to a different location on the screen.

■■Repeat until you have selected all of the (+) symbols.

■■Once you have selected all the symbols, press the [Yes] button.

■■Touch your stylus/finger to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screen’s calibration, press the [Calibrate]) button to begin again.

Do not use excessive force when tapping on the screen during calibration. Use of excessive force could result in damage to the led and/or touch panel.

9. Using the Web Camera(s) (If your model is configured with one)

The Q552 Tablet PC has a front and a rear facing Web Camera. This allows you to take pictures of yourself or objects in front of you to send over the internet.

To use the Web Camera(s), first launch FujitsuHL (Home

Launcher). There are two ways of doing this:

■■Pressing the [Keyboard] button on the PC for two seconds and more, or, ■■Tapping Start > All Programs > FujitsuHL, then selecting FujitsuHL.

To close FujitsuHL, tap the at the right top of the screen.

 

 

 

 

 

 

 

 

Photo Viewer Button

 

Camera Switch Button

 

Home Button

Shutter Button

Setting Button

Application Buttons

The three Tablet PC buttons are located on the right-hand side of a horizontallyoriented system. Two of the buttons have secondary functions. The secondary functions are activated by pressing and holding the button.

Ctl-Alt-Del is the only application button that can be used while the system is logging on or when the system is locked (i.e., when you have the logon or computer locked windows showing on your desktop).

Power Management

Your Fujitsu STYLISTIC Tablet PC has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your Tablet PC may be controlled

from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. See your User’s Guide to take full advantage of these features.

As with all mobile, battery powered computers, there is a trade-off between performance and power savings.

Drivers

To check for the latest drivers go to us.fujitsu.com/computers.

4

Once FujitsuHL is launched you can access the Camera Tool by tapping the icon in the lower left corner of your display. The Camera tool allows you to take and view pictures and modify the settings of the Web Camera(s).

■■Preview Area: This area shows the preview of the scene being viewed by the Web Camera. ■■Home Button: By tapping this button, you can return to the most recently used Launcher screen

■■Photo Viewer Button: By tapping this button, you execute the Photo Viewer to look at your pictures. If some photos have already been saved, this button icon will be changed to the latest photo image.

■■Shutter Button: By tapping this button, you can take a picture. The pictures will be saved in the Camera folder under Pictures.

The filename contains the date on which the picture was taken.

■■Camera Switch Button: By tapping this button, you can switch between the rear-facing Web Camera and the front-facing Web Camera.

■■Setting Button: By tapping this button, you can change the brightness, contrast, and color tone of the Web Camera.

Be sure and reference your User’s Guide for complete instructions on how to use FujitsuHL and the Web Camera(s).

To use fujitsuhl, you should set the display resolution to 1280 x 800 dots.

10. Access your User’s Guide

To take advantage of all the features of your new Fujitsu STYLISTIC Tablet PC, it is highly recommended that you review your electronic User’s Guide. It contains important detailed information about your new computer. You can access your User’s Guide by selecting its icon from the screen desktop.

 

your

with

k

ed

Noteboo

Start

Get

 

 

®AH532

 

 

LIFEBOOK

 

 

Indicators

Status Display Icons

Shows status of system power and battery.

Icon

Mode / State

LED state

Remarks

Power

On state

Blue

The system is powered on and ready to use.

 

Idle mode

Continuousz

 

 

 

 

 

Sleep

Blue,

The system is suspended and saved active settings to RAM

 

blinking

 

 

 

 

 

 

 

 

Off State

Off

The system is suspended and settings and data are saved to the hard disk drive

 

Hibernate

 

 

 

 

 

 

 

Charge/DC In

 

Green

AC adapter and battery are available and charged battery level is 50-100%

 

On State

 

 

 

Orange

AC adapter and battery are available and charged battery level is less than 50%

 

 

 

Idle Mode

 

 

 

Green,

Unit is in suspend mode, AC adapter and battery are available and charged battery

 

 

 

Sleep

blinking

level is 50-100%

 

Hibernate

 

 

 

Orange,

Unit is in suspend mode, AC adapter and battery are available and charged battery

 

Off State

blinking

level is less than 50%

 

 

 

 

 

Off

The AC Adapter is not available

 

 

 

 

5

Loading...
+ 11 hidden pages