Data Sheet FUJITSU PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA
Data Sheet
FUJITSU PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA
PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA MegaRAID based on LSI SAS 3008
The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together.
Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as
the RAID controller used. Benefit from the Fujitsu
RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.
PRAID CP400i - 8 port 12Gb/s SAS, 6Gb/s SATA
The Fujitsu PRAID CP400i SAS/SATA controller card based on the LSI SAS3008 allows latest RAID technology at affordable prices with low power consumption. The PRAID CP400i MegaRAID entry controller card offer users a straight-forward solution that includes essential RAID levels and uncomplicated configuration options.
The PRAID CP400i enables to connect to combinations of SATA and SAS hard disk drives and SSD solid state drives, allowing for storage configurations that optimize cost, performance and robust data protection. The CP400i enables
increased read/write performance thanks to its RAID 0, 1, 10, 5, 50 implementation. The RAID5 performance of CP400i is suitable for entry requirements. Higher performance is provided by PRAID EP400i and EP420i with 1GB and 2GB Write Back cache.
Benefit from the close alignment of the RAID hardware system and the ServerView® RAID
Manager software which offers fast initialization for quick array setup.
Enjoy the world of easy configuration – and the time and cost efficiency that you have been searching for.
Main Features |
Benefits |
12Gb/s SAS ports |
Connect up to 8 SAS / SATA devices (SSD, HDD) |
PCIe 3.0 x8 (backward compatible to PCIe 2.0) |
Extends the PCIe data rates up to 8.0 GT/s per lane |
LSISAS3008 12Gb/s |
RAID levels 0, 1, 10, 5, 50 for more data security |
User RAID Management |
Fully supported by PRIMERGY ServerView RAID Manager |
Page 1 / 3 |
www.fujitsu.com/primergy |