PRIMERGY RX600 S3
incl. SAS version
System configurator and order-information guide
February 2007
Contents
Instructions Configuration diagram Configurator
0 System software I Basic unit
II Processor III Memory
IV onboard SCSI / SAS Contr
V USB devices / optical devices VI Hard disk drives
VII Tape Devices
VIII optional SCSI / RAID controller IX Fibre Channel controller
X Communication / Network
XI System Management Products (RemoteView) XII National accessories pack
Change report
PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX600 S3 Status 2007-01-24
Instructions
This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.
Section |
III |
Memory, example |
|
|
There are X memory slots which can be equipped with XXX MB |
|
|
It is permissible to make up to X passes through the memory upgrade options |
S26361-XXX-XXX |
S26361-XXX-XXX |
|
|
|
Memory XXX MB |
|
Memory XXX MB |
X times |
|
|
|||
|
|
|
|
|
|
|
|
|
max. X times per system |
|
max. X times per system |
|
|
|
|
|
|
In one chapter you can only select as many components (here 4x) as the arrow indicates. |
4x |
Please note that there are information symbols which indicate necessary information.
Further information in the internet see:
http://www.primergy.com |
(internet) |
http://extranet.fujitsu-siemens.com/primergy (extranet)
Prices and availability see price list and PC-/System-Architect.
Subject to change and errors excepted.
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server |
2 of 17 |
System configurator and order-information guide
PRIMERGY RX600 S3 Status 2007-01-24
Configuration diagram PRIMERGY RX600 S3
TOP View
System unit ( I )
Slot
7
6
5
4
3
2
1
Extension slots
SCSI / RAID controller ( VIII )
Fiber Channel ( IX )
Communication/Network ( X )
PCI-X 64-Bit / 100MHz, long
PCI-X 64-Bit / 100MHz, long
PCI-Express x4 ( hot-plug )
PCI-Express x4 ( hot-plug )
occupied by PCIe RAID Controller in SAS Version
PCI-Express x4 ( hot-plug )
PCI-X 64-Bit / 133MHz, long ( hot-plug )
PCI-Express x8 ( hot-plug )
Memory ( III )
Memory Board A
(2 Banks / 4 modules)
Memory Board B (2 Banks / 4 modules)
Memory Board C (2 Banks / 4 modules)
Memory Board D (2 Banks / 4 modules)
Processors must be plugged in order according the picture.
Processor ( II )
Xeon Xeon Xeon Xeon
MP 3 MP 4 MP 2 MP 1
FRONT VIEW
Accessible drives |
|
Tape drives ( VII ) |
|
Operating Panel |
5.25"x 0.5" bay for CD/DVD |
|
5.25"x1.6" Tape Drive |
|
Local View LCD Display |
|
|
|
|
|
|
|
|
|
|
|
|
|
Hard disk drives ( IV ) hot-plug |
|
USB |
Operating |
|
|
USB |
||
|
Panel |
||
Video |
USB |
||
|
|
SCSI Version: 5x 3.5"SCSI |
|
or |
SAS Version: 8x 2.5" SAS |
|||||||
|
Channel A |
|
|
Channel B |
|
|
|
|
|
||
|
0 |
1 |
2 |
|
0 |
1 |
|
|
|
2.5" SAS |
|
|
-ID |
-ID |
-ID |
|
-ID |
-ID |
|
|
|
|
|
|
|
|
|
|
2.5" SAS |
|
|||||
|
SCSI |
SCSI |
SCSI |
|
SCSI |
SCSI |
|
|
|
2.5" SAS |
|
|
|
|
|
|
|
|
|
|
|
2.5" SAS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.5" SAS |
|
|
3.5"x1" |
3.5"x1" |
3.5"x1" |
|
3.5"x1" |
3.5"x1" |
|
|
|
2.5" SAS |
|
|
|
|
|
|
2.5" SAS |
|
|||||
|
|
|
|
|
|
|
|
|
|
2.5" SAS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COM |
USB |
Ethern |
|
|
et |
|
|||
|
|
|
||
Video |
USB |
Ethern |
REAR VIEW |
|
et |
||||
|
|
Hot Plug Redundant Power Supply
1. PSU |
2. PSU |
|
|
Key:
Included in basic unit
Option
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server |
3 of 17 |
|
|
PRIMERGY-Software Configurators and Release Lists |
|
Start "PRIMERGY RX600 S3" |
PRIMERGY RX600 S3 |
Status 2007-01-24 |
|
|
|
|
|
SW - Configurator 32 bit
|
|
|
|
|
|
|
|
|
|
|
with OEM-Software |
|
|
|
|
|
|
||
|
for PRIMERGY Server |
|
|
|
|
|
Usage of OEM SW from MS is |
||
|
|
|
|
|
|
|
|
|
not possible under VMware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VMware-Software
-VCMS VirtualCenter Management Server
-Virtual Infrastructure 3
without OEM-Software for PRIMERGY Server
OEM-SW is bound to HW and is not allowed to be ordered separately.
Exception: VMware SW
For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
MS - Software: W **)
-Windows Server 2003 R2, Standard Edition Enterprise Edition
-Additional loose Client-Access-Licenses (CALs) (not for Web Edition)
CITRIX-Software for
Windows: W-MF
-Presentation Server LoadBalancing Additional User Licences
PRIMECLUSTER *)
-Clustering
-Load Balancing
Linux - Software: L **)
-Open Enterprise Server ***)
-SuSE Linux ES (OEM): LO
-SuSE Linux ES (Support): LS
-Red Hat EL (OEM): LO
-Red Hat EL (Support): LS
MultiPath, Duplex Data Manager (DDM)
W2K; W2K3 Linux (W-DDM)
Manageability Software: V
-RemoteView Software
-RemoteView Service Board
-vPMS 2006std
-Altiris Server Deployment
Backup-Software /
Application-Software: U
-ARCserve
-openSM2
Details eg. version numbers are published in the separate SW-Configurator
*) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under http://extranet.fujitsu-siemens.com/primecluster
**) Pay attention to the release and ordering information in PRINCE -> Operating System http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm
Find detailed software configurators and release lists (OS-matrix / system management) under following addresses:
for internal users: http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm
for partners: http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm
Continue with PRIMERGY
HW configurator
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server |
4 of 17 |
|
|
PRIMERGY-Software Configurators and Release Lists |
|
Start "PRIMERGY RX600 S3" |
PRIMERGY RX600 S3 |
Status 2007-01-24 |
|
|
|
|
|
SW Configurator EM64T
|
|
|
|
|
|
|
|
|
|
|
|
with OEM-Software |
|
|
|
|
|
|
|
||
|
for PRIMERGY Server |
|
|
|
|
|
Usage of OEM SW from MS is |
|
||
|
|
|
|
|
|
|
|
|
not possible under VMware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VMware-Software
-VCMS VirtualCenter Management Server
-Virtual Infrastructure 3
For all SW products please refer to the corresponding software configurator accessible via the Extranet under "Configuration & Tools, -All configurations, -Software, URL see below.
without OEM-Software for PRIMERGY Server
OEM-SW is bound to HW and is not allowed to be ordered separately.
Exception: VMware SW
|
|
|
|
|
|
|
|
|
|
Microsoft - Software: W |
|
|
|
Linux - Software *) **) |
|
||
only |
- Windows Server 2003 R2, |
|
|
only |
- SuSE Linux ES (OEM): LO |
|
||
EM64T |
Standard x64 Edition |
|
|
x86_64 |
- SuSE Linux ES (Support): LS |
|
||
|
Enterprise x64 Edition |
|
|
|
- Red Hat EL (OEM): LO |
|
||
|
- Additional loose |
|
|
|
- Red Hat EL (Support): LS |
|
||
|
Client-Access-Lizenzen (CALs) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CITRIX-Software for |
|
|
|
|
|
|
|
only |
Windows: W-MF |
|
|
|
|
|
|
|
EM64T |
- Presentation Server |
|
|
|
|
|
|
|
|
LoadBalancing |
|
|
|
|
|
|
|
|
Additional User Licences |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
only |
MultiPath, Duplex Data Manager (DDM) |
|
|
|
|||||||||||||
|
|
|
EM64T |
Windows, Linux (W-DDM) |
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Details eg. version numbers are published |
|
|
|
Manageability Software: V**) |
|
|
|
|
|
|
|
|
|
|
|
|
in the separate SW-Configurator |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
only |
- RemoteView Software |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
EM64T |
- RemoteView Service Board |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
- RemoteView Diagnosis |
|
|
|
|
|
|
|
*) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under |
|
||||||||||
|
- vPMS 2006std |
|
|
|
|
|
|
|
|
http://extranet.fujitsu-siemens.com/primecluster |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
**) Pay attention to the release and ordering information in PRINCE -> Operating System |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users: http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm
for partners: http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm
Continue with PRIMERGY
HW configurator
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server |
5 of 17 |
|
|
System configurator and order-information guide |
|
Start PRIMERGY RX600 S3 |
PRIMERGY RX600 S3 |
Status 2007-01-24 |
|
|
|
|
|
Section I
Basic unit
|
|
|
|
|
|
|
|
|
|
|
|
PRIMERGY RX600 S3 SCSI |
|
PRIMERGY RX600 S3 SAS |
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
Rack unit 4U |
|
|
|
Rack unit 4U |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
SCSI basic unit with: |
|
|
|
SAS basic unit with: |
|
|
Basic Unit including: |
|
|||
|
|
|
|
|
|
|
|
|
|
- 2 hot-plug power supply (redundant) |
|
- 3 + 2 bays for 1" HDD`s (two channels) |
|
- 8 bays for 2.5" SAS HDD`s |
|
- 2 hot-plug fan modules (redundant) |
|
||||||
|
|
|
|
|
|
|
|
|
|
- LCD-Display for LocalView (Service Display) |
|
- 7 PCI Slots |
|
|
|
- 6 PCI Slots |
|
|
- 1 bay (0,5" height) for CDor DVD-ROM |
|
|||
|
- 1x 64bit / 133MHz PCI-X slot (hot plug) |
|
- 1x 64bit / 133MHz PCI-X slot (hot plug) |
|
- 1x 5.25" bays FH (1,6" high) for accessible drives |
|
|||||
|
- 2x 64bit / 100MHz PCI-X slot |
|
- 2x 64bit / 100MHz PCI-X slot |
|
- Rackmounting kit |
|
|||||
|
- 3x PCIe x4 slot (hot plug) |
|
|
|
- 2x PCIe x4 slot (hot plug) |
|
|
|
|||
|
- 1x PCIe x8 slot (hot plug) |
|
|
|
- 1x PCIe x8 slot (hot plug) |
|
Systemboard with |
|
|||
|
|
|
|
|
|
|
|
|
|
- Intel E8501 chipset with 800MHz Frontside Bus |
|
- onboard RAID 5 functionality |
|
- SAS RAID 5 Controller |
|
|
- 1x XEON MP dua core processor |
|
|||||
with 256MB Cache (BBU optional) |
|
with 256MB Cache and BBU |
|
(2nd, 3rd and 4th as option) |
|
||||||
|
|
|
|
|
|
|
|
|
|
- 1 memory board (2nd, 3rd and 4th as option) |
|
|
|
|
|
|
|
|
|
|
|
- Ultra 320 SCSI-controller (LSI 53C1030) |
|
- memory of basic units selectable via |
|
- memory of basic units selectable via |
|
- Dual LAN-Controller 1GBit on-board |
|
||||||
base memory order codes |
|
base memory order codes |
|
WOL-capable (BroadCom 5704) |
|
||||||
2.60GHz/4MB 7110M |
S26361-K988-V410 |
|
2.60GHz/4MB 7110M |
S26361-K988-V510 |
|
- VGA Controller on-board |
|
||||
3.00GHz/4MB 7120M |
S26361-K988-V420 |
|
3.00GHz/4MB 7120M |
S26361-K988-V520 |
|
(ATI Radeon 7000M, 16MB RAM) |
|
||||
3.20GHz/8MB 7130M |
S26361-K988-V430 |
|
3.20GHz/8MB 7130M |
S26361-K988-V530 |
|
- Server Management Controller on-board |
|
||||
3.40GHz/16MB 7140M |
S26361-K988-V440 |
|
3.40GHz/16MB 7140M |
S26361-K988-V540 |
|
(RSB 2 Board optional) |
|
||||
|
|
|
|
|
|
|
|
|
|
- ServerView Suite Software package |
|
|
|
|
|
|
|
|
|
|
|
incl. ServerStart, ServerBooks, |
|
|
|
|
|
|
|
|
|
|
|
Management Software and Updates |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRIMERGY PRIMECENTERRack
SNP:SY-F1647E301-P
Installation ex works for one server or subsystem.
Hereby the rack will be delivered completely pre-mounted and
all wired connections are tested.
With racks 12U, 24U, 38U: Systems and components
will be delivered installed in the rack With racks 46U:
Systems and components will be delivered separately
To be ordered only together with a PRIMERGY-
PRIMECENTER rack e.g.: S26361-K826-V10x
refer configurator DC-Rack
max. 1x per System
"Rack-mounting ex factory"
This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the PRIMERGY racks. In case of the 46 U PRIMERGY rack, this service has to be ordered,
to get the mounting kits and the cables installed
-Interfaces:
Front side 3x USB 2.0
1x VGA (15 pin)
Rear Side 2x USB 2.0
1x VGA (15 pin)
1x RS-232-C (serial, 9 pin)
2x RJ45 (on board LAN)
no PS/2 connection for KB / Mouse (USB connectivity must be used instead)
Rack Mounting kit is part of the basic unit PRIMERGY RX600 S2
-1 pair of telescopic rails (713 - 812mm)
-1 bracket DC-PC-Rack
-1 cable management for DC-PC-racks
This kit allows for mounting of TX/RX600 S3 in in FSC 19" DataCenterand
PRIMECENTERracks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in depth from 713 - 812mm
Installation in PRIMERGY 19" Classic rack is not possible.
Due to the heat dissipation of the system, sufficent cooling couldn´t be enabled in classic rack.
Connetion for KVM switch / Rack console
-RC23 can be directly connected (both USB and PS/2 connections)
-KVM S2 series needs the KVM S2 Adapter USB<->VGA
-For ES4/8+ KVM series with PS/2 connector as well as for standard PS/2 KB / Mouse
an additional USB to PS/2 adapter must be bought additionally and connected to the RX600 S3. The adapter offers 2x PS/2 ports.
Adaper order number, to purchase via PRIMEPOWER, is:
D:GP70P-KA01 Adapter for PS/2<->USB
-Appropriate FSC USB keyboard is S26381-K340-V1*
This keyboard also needs USB cable T26139-Y3812-V1
A
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server |
6 of 17 |