USER'S MANUAL
(Specification and Part Names)
WIDE PLASMA DISPLAY P42VHA40W/P42HHA40W/P50XHA40W/P55XHA40W/ P63XHA40W P42VHA40U/P42HHA40U/P50XHA40U/P55XHA40U/ P63XHA40U P42VHA40A/P42HHA40A/P50XHA40A/P55XHA40A/ P63XHA40A P42VHA40R/P63XHA40R
|
Contents |
|
Page |
Before Use |
|
• CHECKING ACCESSORIES.................................................................................... |
E-2 |
• INSTALLATION ........................................................................................................ |
E-3 |
Usage |
|
• PART NAMES AND FUNCTIONS............................................................................ |
E-4 |
Others |
|
• OPTIONS.................................................................................................................. |
E-9 |
• MAIN SUPPORTED SIGNALS............................................................................... |
E-10 |
• SPECIFICATION .................................................................................................... |
E-12 |
Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
*Installation and removal require special expertise. Consult your product dealer for details.
*When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and "color" will be displayed for all other models.
The notation used in this users' manual is "color".
*All operation items of A model are the same as W model.
Please read the description part of "W model" for "A model" in User's manual (2/2).
*The residential warranty for "A model" is enclosed in accessories.
*The last digit of MODEL NO. (10 digit alphanumeric characters) indicated on the product means the body color indication alphabet or the management number.
*The illustration of external appearance is for 42" model.
Please acknowledge some differences in the actual product of other models.
Pусский Português Italiano Français Español Deutsch English
÷–Œƒ
One power cable |
Two small |
Two big |
Three user's manuals |
One remote control |
One remote control |
|
|
ferrite cores |
ferrite cores |
|
|
(for the W/A/R models) |
(for the U model) |
|
|
|
Manual |
Manual |
|
|
Manual
No.:ZCAT1518-0730 No.:SFT-72SN
Mfr.:TDK |
Mfr.:TKK |
||||||
Two AA batteries |
One residential |
||||||
|
|
|
warranty |
||||
|
|
|
(for the A model) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, video input terminal, attach one of these ferrite cores to the cable near the terminal.
Power Cable RCA Video Cable
Ferrite Core |
Ferrite Core |
|
Two small ferrite cores
When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.
Ferrite Core |
Ferrite Core |
E-2
To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. To ensure proper heat radiation, provide at least as much space around the display as shown below.
*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
*Never attempt to tilt the display sideways or backward.
*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
*To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.
Display Section |
|
|
|
|
Front |
|
Side |
|
Upper |
(cm) |
(cm) |
|
|
|
|
|
10 |
|
|
10 |
|
10 |
Wall |
Left |
|
Right |
|
|
5 |
|
|
|
Lower |
|
3.5 (for 42”/50”) |
|
|
|
|
|
|
|
5 (for 55”/63”) |
Pусский Português Italiano Français Español Deutsch English
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.
Reference
See P. E-9 for more information on options.
E-3
÷–Œƒ
DISPLAY SECTION – FRONT
Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red): |
Stand-by state |
|
Lit (green): |
Power ON state |
|
Flashing (red or green): |
Malfunction (Flashes differently |
|
|
depending on the type of |
|
|
malfunction.) |
|
Remote control signal receiver |
||
Receives signals from the remote control. |
||
Input mode selector button |
[MODE] |
|
Input mode selector button |
[MODE] |
Switches between picture input modes.
VOL + buttonVOL - button
Adjusts the audio volume.
Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Ambient Sensor
Detects the brightness of external light.
Do not obstruct it.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-4
DISPLAY SECTION – BACK AND BOTTOM PART
Back
Bottom
/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model
Connect this terminal to the HDMI output terminal for DVD, etc.
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
RGB1 input terminal (RGB1 INPUT/DVI-D) for the W/U/A models
Connect this terminal to the PC’s display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.
Note
• The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.
Pусский Português Italiano Français Español Deutsch English
÷–Œƒ
E-5
PART NAMES AND FUNCTIONS (Continued)
RGB2 input terminal (RGB2 INPUT/mD-sub) for the W/U/A models / RGB1 input terminal (RGB1 INPUT/mD-sub) for the R model
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
Component video input terminal (VIDEO3 INPUT)
Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
Audio3 input terminal (AUDIO3 INPUT)Audio2 input terminal (AUDIO2 INPUT)
Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the audio output terminal of your VCR, etc. (See the User’s manual (2/2) for the selection of audio input for video input.)
External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
*See the speaker instruction manual for more information.
Power input terminal
Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
E-6
DVI-D terminal (RGB1 INPUT/DVI-D) |
|
|
|
|
|
|
|||||
Pin No. |
Signal |
Pin No. |
Signal |
Pin No. |
Signal |
||||||
for the W/U/A models |
|||||||||||
|
|
|
|
|
|
||||||
|
|
|
|
|
1 |
T.M.D.S. Data2– |
9 |
T.M.D.S. Data1– |
17 |
T.M.D.S. Data0– |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
T.M.D.S. Data2+ |
10 |
T.M.D.S. Data1+ |
18 |
T.M.D.S. Data0+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
T.M.D.S. Data2 |
11 |
T.M.D.S. Data1 |
19 |
T.M.D.S. Data0 |
|
|
|
|
|
|
|
Shield |
|
Shield |
|
Shield |
|
|
|
|
|
|
4 |
— |
12 |
— |
20 |
— |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
— |
13 |
— |
21 |
— |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
DDC Clock |
14 |
+5V Power |
22 |
T.M.D.S. Clock Shield |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
DDC Data |
15 |
Ground (for +5V) |
23 |
T.M.D.S. Clock+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 |
— |
16 |
Hot Ploug Detect |
24 |
T.M.D.S. Clock– |
|
|
|
|
|
|
|
|
|
|
|
|
mD-sub input terminal
(RGB2 INPUT/mD-sub) for the W/U/A models (RGB1 INPUT/mD-sub) for the R model
Pin No. |
Input signal |
Pin No. |
Input signal |
|
|
|
|
1 |
Red |
9 |
— |
|
|
|
|
2 |
Green |
10 |
Ground |
|
|
|
|
3 |
Blue |
11 |
— |
|
|
|
|
4 |
— |
12 |
— |
|
|
|
|
5 |
Ground |
13 |
Horizontal synchronization |
|
|
|
|
6 |
Ground |
14 |
Vertical synchronization |
|
|
|
|
7 |
Ground |
15 |
— |
|
|
|
|
8 |
Ground |
Frame |
Ground |
|
|
|
|
RS-232C terminal (RS-232C) |
Pin No. |
Signal |
|
||
|
1 |
DCD (Data Carrier Detect) |
|
2 |
RD (Received Data) |
|
3 |
TD (Transmit Data) |
|
4 |
DTR (Data Terminal ready) |
|
5 |
GND (Ground) |
|
6 |
DSR (Data Set Ready) |
|
7 |
RTS (Request To send) |
|
8 |
CTS (Clear To Send) |
|
9 |
RI (Ring Indication) |
Pусский Português Italiano Français Español Deutsch English
÷–Œƒ
E-7
PART NAMES AND FUNCTIONS (Continued)
HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model
Pin No. |
Input signal |
Pin No. |
Input signal |
|
|
|
|
1 |
T.M.D.S. Data2+ |
11 |
T.M.D.S. Clock Shield |
|
|
|
|
2 |
T.M.D.S. Data2 Shield |
12 |
T.M.D.S. Clock– |
|
|
|
|
3 |
T.M.D.S. Data2– |
13 |
CEC |
|
|
|
|
4 |
T.M.D.S. Data1+ |
14 |
Reserve |
|
|
|
|
5 |
T.M.D.S. Data1 Shield |
15 |
DDC Clock |
|
|
|
|
6 |
T.M.D.S. Data1– |
16 |
DDC Data |
|
|
|
|
7 |
T.M.D.S. Data0+ |
17 |
Ground (for +5V) |
|
|
|
|
8 |
T.M.D.S. Data0 Shield |
18 |
+5V Power |
|
|
|
|
9 |
T.M.D.S. Data0– |
19 |
Hot Plug Detect |
|
|
|
|
10 |
T.M.D.S. Clock+ |
Frame |
FG |
|
|
|
|
HDMI (High-Definition Multimedia Interface)
HDMI is a standard for home digital interfaces, which can transmit images as well as multichannel audio signals and control signals through one cable.
E-8
English
Wall-mounting Bracket |
0° to 15° mounting angle |
P-WB4201 (for 42” model/50” model) |
P-WB6300 (for 55” model/63” model)
Ceiling unit |
0° to 15° mounting angle |
P-CT4200 (for 42” model/50” model) |
P-CT6300 (for 55” model/63” model)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Desktop Stand unit |
P-TT4202 (for 42” model/50” model/55” |
|
|
|
||||
|
|
|
|
|
||||
|
model) |
|
|
|
||||
|
P-TT6300 (for 63” model) |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speaker |
P-SP1000 (for attaching to the display) for |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||||
(1 set of 2 speakers) |
42” model/50” model |
|
|
|
|
|
|
|
|
|||
|
P-SP5010 (for attaching to the display) for |
|
|
|
|
|
|
|
|
|||
|
55” model |
|
|
|
|
|
|
|
|
|||
|
P-SP6300 (for attaching to the display) for |
|
|
|
|
|
|
|
|
|||
|
63” model |
|
|
|
|
|
|
|
|
|||
|
P-SP4200 (for mounting on the speaker |
|||||||||||
|
stands) for 42” model |
|||||||||||
|
P-SP5010 (for mounting on the speaker |
|||||||||||
|
stands) for 50” model/55” model |
|||||||||||
Desktop Speaker Stand |
P-ST4200 (for P-SP4200) |
|||||||||||
(1 set of 2 speaker stands) |
P-ST5000 (for P-SP5010) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pусский Português Italiano Français Español Deutsch
*When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
*The colors of options do not match the display colors perfectly.
*To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer before purchasing.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION
This display (P42VHA40/P42HHA40/P50XHA40) is for use only with Fujitsu General Limited's option (P-WB4201, P-CT4200, P-TT4202). This display (P55XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT4202).
This display (P63XHA40) is for use only with Fujitsu General Limited's option (P-WB6300, P-CT6300, P-TT6300). Using this display with other option can cause instability resulting in possible injury.
E-9
÷–Œƒ
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust the parameters.
When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines) |
Horizontal frequency (kHz) |
Vertical frequency (Hz) |
Signal |
DVI-D |
|
|
|
|
|
640 x 480 |
31.47 |
59.94 |
VGA |
|
|
|
|
|
|
640 x 480 |
37.50 |
75.00 |
VGA 75 Hz |
|
|
|
|
|
|
640 x 480 |
43.27 |
85.01 |
VGA 85 Hz |
|
|
|
|
|
|
720 x 400 |
31.47 |
70.09 |
400 lines |
|
|
|
|
|
|
800 x 600 |
37.88 |
60.32 |
SVGA 60 Hz |
|
|
|
|
|
|
800 x 600 |
46.88 |
75.00 |
SVGA 75 Hz |
|
|
|
|
|
|
800 x 600 |
53.67 |
85.06 |
SVGA 85 Hz |
|
|
|
|
|
|
1024 x 768 |
48.36 |
60.00 |
XGA 60 Hz |
|
|
|
|
|
|
1024 x 768 |
60.02 |
75.03 |
XGA 75 Hz |
|
|
|
|
|
|
1024 x 768 |
68.68 |
84.99 |
XGA 85 Hz |
|
|
|
|
|
|
1280 x 1024 |
63.98 |
60.02 |
SXGA 60 Hz |
|
|
|
|
|
|
1280 x 1024 |
79.98 |
75.03 |
SXGA 75 Hz |
|
|
|
|
|
|
848 x 480 |
31.02 |
60.00 |
|
|
|
|
|
|
|
852 x 480 |
31.72 |
59.97 |
|
|
|
|
|
|
|
1360 x 768 |
47.71 |
60.01 |
|
|
|
|
|
|
|
720 x 485 |
15.73 |
59.94 |
60 fields |
|
|
|
|
|
|
720 x 575 |
15.63 |
50.00 |
50 fields |
|
|
|
|
|
|
It doesn’t support the model with 42” display (displayed pixels 852 x 480 dots x lines).
* In the DVI-D mode, the input signal can be restricted partly.
E-10
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal |
Vertical |
Signal |
HDMI |
|
frequency (kHz) |
frequency (Hz) |
|||
|
|
|||
|
|
|
|
|
15.73 |
59.94 |
SDTV 480i |
|
|
|
|
|
|
|
15.63 |
50.00 |
SDTV 576i |
|
|
|
|
|
|
|
31.47 |
59.94 |
SDTV 480p |
|
|
|
|
|
|
|
31.25 |
50.00 |
SDTV 576p |
|
|
|
|
|
|
|
45.00 |
60.00 |
HDTV 720p |
|
|
|
|
|
|
|
37.50 |
50.00 |
HDTV 720p |
|
|
|
|
|
|
|
33.75 |
60.00 |
HDTV 1080i |
|
|
|
|
|
|
|
28.13 |
50.00 |
HDTV 1080i |
|
|
|
|
|
|
Main corresponding signals (Video, S-video mode)
Horizontal |
Vertical |
Signal |
|
frequency (kHz) |
frequency (Hz) |
||
|
|||
|
|
|
|
15.73 |
59.94 |
NTSC |
|
|
|
|
|
15.63 |
50.00 |
PAL |
|
|
|
|
|
15.63 |
50.00 |
SECAM |
|
|
|
|
|
15.63 |
59.52 |
PAL60 |
|
|
|
|
|
15.63 |
50.00 |
N-PAL |
|
|
|
|
|
15.73 |
59.95 |
M-PAL |
|
|
|
|
|
15.73 |
59.94 |
4.43NTSC |
|
|
|
|
Pусский Português Italiano Français Español Deutsch English
÷–Œƒ
Note
•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
•With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this event, match the input signals to another frequency rather than those listed above.
•You can check input signals through "Information" on the FEATURES Menu screen. (See User's Manual (2/2))
•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-11
WIDE PLASMA DISPLAY
|
Model |
|
P42VHA40W/A |
|
P42HHA40W/A |
|
P50XHA40W/A |
P55XHA40W/A |
|
P63XHA40W/A |
|||
Screen size |
|
|
42" wide screen: |
|
42" wide screen: |
|
50" wide screen: |
55" wide screen: |
|
63" wide screen: |
|||
|
|
|
|
92.1 cm (W) x 51.8 |
|
92.2 cm (W) x 52.2 |
|
110.6 cm (W) x 62.2 |
122.9 cm (W) x 69.1 |
|
139.3 cm (W) x 78.3 |
||
|
|
|
|
cm (H) |
|
|
cm (H) |
|
cm (H) |
cm (H) |
|
|
cm (H) |
|
|
|
|
(105.7 cm diagonal) |
|
(106.0 cm diagonal) |
|
(126.9 cm diagonal) |
(140.0 cm diagonal) |
|
(159.8 cm diagonal) |
||
|
|
|
|
36.3 inch (W) x 20.4 |
|
36.3 inch (W) x 20.6 |
|
43.5 inch (W) x 24.5 |
48.4 inch (W) x 27.2 |
|
54.8 inch (W) x 30.8 |
||
|
|
|
|
inch (H) |
|
|
inch (H) |
|
inch (H) |
inch (H) |
|
|
inch (H) |
|
|
|
|
(41.6 inch diagonal) |
|
(41.7 inch diagonal) |
|
(50 inch diagonal) |
(55.1 inch diagonal) |
|
(62.9 inch diagonal) |
||
Aspect ratio |
|
|
16:9 (wide) |
|
|
|
|
|
|
|
|
||
Number of pixels |
|
852 (H) x 480 (V) |
|
1024 (H) x 1024 (V) |
|
1366 (H) x 768 (V) |
|
|
|
|
|||
Weight |
|
|
31.5 kg / 69 lbs |
|
|
|
45 kg / 99 lbs |
55 kg / 121 lbs |
|
72 kg / 159 lbs |
|||
Outer dimensions |
|
103.9 (W) x 64.0 (H) x 8.7 (D) cm |
|
121.6 (W) x 72.6 (H) |
138.0 (W) x 80.8 (H) |
|
150.4 (W) x 89.4 (H) |
||||||
|
|
|
|
40.9 (W) x 25.2 (H) x 3.4 (D) inch |
|
x 10.0 (D) cm |
x 12.5 (D) cm |
|
x 12.3 (D) cm |
||||
|
|
|
|
(does not include outer projections) |
|
47.9 (W) x 28.6 (H) |
54.3 (W) x 31.8 (H) |
|
59.2 (W) x 35.2 (H) |
||||
|
|
|
|
|
|
|
|
|
x 3.9 (D) inch |
x 4.9 (D) inch |
|
x 4.8 (D) inch |
|
|
|
|
|
|
|
|
|
|
(does not include |
(does not include |
|
(does not include |
|
|
|
|
|
|
|
|
|
|
outer projections) |
outer projections) |
|
outer projections) |
|
Power supply |
|
110-240 VAC 50/60 Hz |
|
|
|
|
|
|
|
||||
Current rating |
|
3.2-1.35 A |
|
4.2-1.8 A |
|
4.4-1.9 A |
5.8-2.3 A |
|
|
6.8-2.6 A |
|||
External equipment |
terminals |
|
|
|
|
|
|
|
|
|
|||
Video input |
|
|
VIDEO1 INPUT (Video input) |
RCA terminal |
1 Vp-p/75 Ω |
|
|||||||
terminals |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO2 INPUT (S-video input) |
S terminal |
Y: |
1 Vp-p/75 Ω |
||||||||
|
|
|
|
|
|
|
|
|
|
C: |
0.286 Vp-p/75 Ω |
||
|
|
|
|
|
|
|
|||||||
|
|
|
|
VIDEO3/VIDEO4 INPUT |
3 RCA terminals Y: |
1 Vp-p/75 Ω |
|||||||
|
|
|
|
(Component video input) |
|
PB/CB: |
0.7 Vp-p/75 |
Ω |
|||||
|
|
|
|
|
|
|
|
|
|
PR/CR: |
0.7 Vp-p/75 |
Ω |
|
PC input terminal |
|
RGB1 input |
DVI-D terminal (EIA/CEA-861B Compliant) |
|
|
|
|
||||||
|
|
|
|
RGB2 input |
mD-sub, 3 rows, 15-pin |
|
|
|
|
|
|||
|
|
|
|
|
|
|
Picture signal: 0.7 Vp-p/75 Ω |
|
|
|
|
||
|
|
|
|
|
|
|
Synchronization signal:TTL level |
|
|
|
|
||
Audio terminals |
|
2 audio input pin jacks (L/R) (3 lines) |
|
|
|
|
|
||||||
|
|
|
|
500 mVrms/at least 22 kΩ |
|
|
|
|
|
||||
Control terminal |
|
RS-232C connector (D-sub 9-pin) |
|
|
|
|
|
||||||
External speaker |
|
Max. output: 10 W + 10 W, 6 Ω |
|
|
|
|
|
||||||
output terminal |
|
|
|
|
|
|
|
|
|
|
|
||
Operating |
|
|
Temperature: 0 to 40 °C / 32 to 104 °F |
|
|
|
|
|
|||||
conditions |
|
|
Humidity: 20 to 80 % |
|
|
|
|
|
|||||
Accessories |
|
|
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries, 1 residential |
||||||||||
|
|
|
|
warranty (for the A model) |
|
|
|
|
|
||||
Regulation |
|
|
|
|
|
|
|
|
|
|
|
|
|
• UL, CSA Safety: UL6500, C-UL |
|
|
|
|
|
|
|
||||||
|
EMC: FCC Part 15 Class B, ICES-003 Class B |
|
|
|
|
|
|||||||
• CE |
Safety: EN60065 |
|
|
|
|
|
|
|
|
|
|
||
|
EMC: |
EN55022 |
|
1998, Class B |
|
|
|
|
|
|
|
||
|
|
EN61000-3-2 |
1995 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-3-3 |
1995 |
|
|
|
|
|
|
|
|
||
|
|
EN55024 |
|
1998 |
|
|
|
|
|
|
|
|
|
|
|
EN61000-4-2 |
1995 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-3 |
1996 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-4 |
1995 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-5 |
1995 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-6 |
1996 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-8 |
1993 |
|
|
|
|
|
|
|
|
||
|
|
EN61000-4-11 |
1994 |
|
|
|
|
|
|
|
|
||
• AS |
Safety: IEC60065 |
|
|
|
|
|
|
|
|
|
|||
|
EMC: |
AS/NZS 3548 |
|
|
|
|
|
|
|
|
|
E-12
WIDE PLASMA DISPLAY
|
Model |
|
P42VHA40U |
|
P42HHA40U |
|
P50XHA40U |
P55XHA40U |
|
P63XHA40U |
||
Screen size |
|
42" wide screen: |
|
42" wide screen: |
|
50" wide screen: |
55" wide screen: |
|
63" wide screen: |
|||
|
|
|
92.1 cm (W) x 51.8 |
|
92.2 cm (W) x 52.2 |
|
110.6 cm (W) x 62.2 |
122.9 cm (W) x 69.1 |
|
139.3 cm (W) x 78.3 |
||
|
|
|
cm (H) |
|
|
cm (H) |
|
cm (H) |
cm (H) |
|
|
cm (H) |
|
|
|
(105.7 cm diagonal) |
|
(106.0 cm diagonal) |
|
(126.9 cm diagonal) |
(140.0 cm diagonal) |
|
(159.8 cm diagonal) |
||
|
|
|
36.3 inch (W) x 20.4 |
|
36.3 inch (W) x 20.6 |
|
43.5 inch (W) x 24.5 |
48.4 inch (W) x 27.2 |
|
54.8 inch (W) x 30.8 |
||
|
|
|
inch (H) |
|
|
inch (H) |
|
inch (H) |
inch (H) |
|
|
inch (H) |
|
|
|
(41.6 inch diagonal) |
|
(41.7 inch diagonal) |
|
(50 inch diagonal) |
(55.1 inch diagonal) |
|
(62.9 inch diagonal) |
||
Aspect ratio |
|
16:9 (wide) |
|
|
|
|
|
|
|
|
||
Number of pixels |
|
852 (H) x 480 (V) |
|
1024 (H) x 1024 (V) |
|
1366 (H) x 768 (V) |
|
|
|
|
||
Weight |
|
31.5 kg / 69 lbs |
|
|
|
45 kg / 99 lbs |
55 kg / 121 lbs |
|
72 kg / 159 lbs |
|||
Outer dimensions |
|
103.9 (W) x 64.0 (H) x 8.7 (D) cm |
|
121.6 (W) x 72.6 (H) |
138.0 (W) x 80.8 (H) |
|
150.4 (W) x 89.4 (H) |
|||||
|
|
|
40.9 (W) x 25.2 (H) x 3.4 (D) inch |
|
x 10.0 (D) cm |
x 12.5 (D) cm |
|
x 12.3 (D) cm |
||||
|
|
|
(does not include outer projections) |
|
47.9 (W) x 28.6 (H) |
54.3 (W) x 31.8 (H) |
|
59.2 (W) x 35.2 (H) |
||||
|
|
|
|
|
|
|
|
x 3.9 (D) inch |
x 4.9 (D) inch |
|
x 4.8 (D) inch |
|
|
|
|
|
|
|
|
|
(does not include |
(does not include |
|
(does not include |
|
|
|
|
|
|
|
|
|
outer projections) |
outer projections) |
|
outer projections) |
|
Power supply |
|
110-240 VAC 50/60 Hz |
|
|
|
|
|
|
|
|||
Current rating |
|
3.2-1.35 A |
|
4.2-1.8 A |
|
4.4-1.9 A |
5.8-2.3 A |
|
|
6.8-2.6 A |
||
External equipment |
terminals |
|
|
|
|
|
|
|
|
|
||
Video input |
|
VIDEO1 INPUT (Video input) |
RCA terminal |
1 Vp-p/75 Ω |
|
|||||||
terminals |
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO2 INPUT (S-video input) |
S terminal |
Y: |
1 Vp-p/75 Ω |
||||||||
|
|
|
|
|
|
|
|
|
C: |
0.286 Vp-p/75 Ω |
||
|
|
|
|
|
|
|||||||
|
|
|
VIDEO3/VIDEO4 INPUT |
3 RCA terminals Y: |
1 Vp-p/75 Ω |
|||||||
|
|
|
(Component video input) |
|
PB/CB: |
0.7 Vp-p/75 |
Ω |
|||||
|
|
|
|
|
|
|
|
|
PR/CR: |
0.7 Vp-p/75 |
Ω |
|
|
|
|
VIDEO5 INPUT |
|
|
HDMI terminal (HDMI type A connector) |
||||||
PC input terminal |
|
RGB1 input |
DVI-D terminal (EIA/CEA-861B Compliant) |
|
|
|
|
|||||
|
|
|
RGB2 input |
mD-sub, 3 rows, 15-pin |
|
|
|
|
|
|||
|
|
|
|
|
|
Picture signal: 0.7 Vp-p/75 Ω |
|
|
|
|
||
|
|
|
|
|
|
Synchronization signal:TTL level |
|
|
|
|
||
Audio terminals |
|
2 audio input pin jacks (L/R) (3 lines) |
|
|
|
|
|
|||||
|
|
|
500 mVrms/at least 22 kΩ |
|
|
|
|
|
||||
Control terminal |
|
RS-232C connector (D-sub 9-pin) |
|
|
|
|
|
|||||
External speaker |
|
Max. output: 10 W + 10 W, 6 Ω |
|
|
|
|
|
|||||
output terminal |
|
|
|
|
|
|
|
|
|
|
|
|
Operating |
|
Temperature: 0 to 40 °C / 32 to 104 °F |
|
|
|
|
|
|||||
conditions |
|
Humidity: 20 to 80 % |
|
|
|
|
|
|||||
Accessories |
|
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries |
||||||||||
Regulation |
|
|
|
|
|
|
|
|
|
|
||
• UL, CSA Safety: UL6500, C-UL |
|
|
|
|
|
|
|
|||||
|
EMC: FCC Part 15 Class B, ICES-003 Class B |
|
|
|
|
|
||||||
• CE |
Safety: EN60065 |
|
|
|
|
|
|
|
|
|
|
|
|
EMC: EN55022 |
|
1998, Class B |
|
|
|
|
|
|
|
||
|
EN61000-3-2 |
1995 |
|
|
|
|
|
|
|
|
||
|
EN61000-3-3 |
1995 |
|
|
|
|
|
|
|
|
||
|
EN55024 |
|
1998 |
|
|
|
|
|
|
|
|
|
|
EN61000-4-2 |
1995 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-3 |
1996 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-4 |
1995 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-5 |
1995 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-6 |
1996 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-8 |
1993 |
|
|
|
|
|
|
|
|
||
|
EN61000-4-11 |
1994 |
|
|
|
|
|
|
|
|
||
• AS |
Safety: IEC60065 |
|
|
|
|
|
|
|
|
|
||
|
EMC: AS/NZS 3548 |
|
|
|
|
|
|
|
|
|
Note
•Specifications and external appearance may be change for the sake of improvement.
•Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least 1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while working.
• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
Pусский Português Italiano Français Español Deutsch English
÷–Œƒ
E-13
SPECIFICATION (Continued)
WIDE PLASMA DISPLAY
|
Model |
|
|
|
P42VHA40R |
|
|
|
P63XHA40R |
|
||
Screen size |
|
|
42" wide screen: |
|
63" wide screen: |
|
|
|
||||
|
|
|
|
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) |
|
139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal) |
||||||
|
|
|
|
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) |
|
54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) |
||||||
Aspect ratio |
|
|
16:9 (wide) |
|
|
|
|
|
|
|
||
Number of pixels |
|
852 (H) x 480 (V) |
|
1366 (H) x 768 (V) |
|
|
|
|||||
Weight |
|
|
31.5 kg / 69 lbs |
|
72 kg / 159 lbs |
|
|
|
||||
Outer dimensions |
|
103.9 (W) x 64.0 (H) x 8.7 (D) cm |
|
150.4 (W) x 89.4 (H) x 12.3 (D) cm |
|
|
||||||
|
|
|
|
40.9 (W) x 25.2 (H) x 3.4 (D) inch |
|
59.2 (W) x 35.2 (H) x 4.8 (D) inch |
|
|
||||
|
|
|
|
(does not include outer projections) |
|
(does not include outer projections) |
|
|
||||
Power supply |
|
110-240 VAC 50/60 Hz |
|
|
|
|
|
|
||||
Current rating |
|
4.2-1.7 A |
|
|
6.8-2.6 A |
|
|
|
|
|||
External equipment |
terminals |
|
|
|
|
|
|
|
|
|||
Video input |
|
|
VIDEO1 INPUT (Video input) |
RCA terminal |
1 Vp-p/75 Ω |
|
|
|||||
terminals |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO2 INPUT (S-video input) |
S terminal |
Y: |
1 Vp-p/75 Ω |
Ω |
||||||
|
|
|
|
|
|
|
|
|
C: |
0.286 Vp-p/75 |
||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
VIDEO3/VIDEO4 INPUT |
3 RCA terminals Y: |
1 Vp-p/75 Ω |
|
|||||
|
|
|
|
(Component video input) |
|
|
PB/CB: |
0.7 Vp-p/75 |
Ω |
|
||
|
|
|
|
|
|
|
|
|
PR/CR: |
0.7 Vp-p/75 |
Ω |
|
PC input terminal |
|
RGB1 input |
mD-sub, 3 rows, 15-pin |
Ω |
|
|
|
|
||||
|
|
|
|
|
|
Picture signal: 0.7 Vp-p/75 |
|
|
|
|
||
|
|
|
|
|
|
Synchronization signal:TTL level |
|
|
|
|
||
Audio terminals |
|
2 audio input pin jacks (L/R) (3 lines) |
|
|
|
|
|
|
||||
|
|
|
|
500 mVrms/at least 22 kΩ |
|
|
|
|
|
|
||
Control terminal |
|
RS-232C connector (D-sub 9-pin) |
|
|
|
|
|
|
||||
External speaker |
|
Max. output: 10 W + 10 W, 6 Ω |
|
|
|
|
|
|
||||
output terminal |
|
|
|
|
|
|
|
|
|
|
||
Operating |
|
|
Temperature: 0 to 40 °C / 32 to 104 °F |
|
|
|
|
|
|
|||
conditions |
|
|
Humidity: |
20 to 80 % |
|
|
|
|
|
|
||
Accessories |
|
|
3 user's manuals, 1 power cable, 2 small ferrite cores, 2 big ferrite cores, 1 remote control, 2 AA batteries |
|||||||||
Regulation |
|
|
|
|
|
|
|
|
|
|
|
|
• CE |
Safety: EN60065 |
|
|
|
|
|
|
|
|
|
||
|
EMC: |
EN55022 |
|
1998, Class B |
|
|
|
|
|
|
||
|
|
EN61000-3-2 |
1995 |
|
|
|
|
|
|
|
||
|
|
EN61000-3-3 |
1995 |
|
|
|
|
|
|
|
||
|
|
EN55024 |
|
1998 |
|
|
|
|
|
|
|
|
|
|
EN61000-4-2 |
1995 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-3 |
1996 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-4 |
1995 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-5 |
1995 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-6 |
1996 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-8 |
1993 |
|
|
|
|
|
|
|
||
|
|
EN61000-4-11 |
1994 |
|
|
|
|
|
|
|
||
• AS |
Safety: IEC60065 |
|
|
|
|
|
|
|
|
|||
|
EMC: |
AS/NZS 3548 |
|
|
|
|
|
|
|
|
Note
•Specifications and external appearance may be change for the sake of improvement.
•Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42" / at least 1.9 m or 6.2 feet for 50" / at least 2.1 m or 6.9 feet for 55" / at least 2.4 m or 7.9 feet for 63") from the screen and to look occasionally away while working.
• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-14
USER'S MANUAL
(Precautions and Adjustment Methods)
WIDE PLASMA DISPLAY
Contents
|
Page |
|
Page |
Before Use |
|
• OTHER ADJUSTMENTS ........................................... |
E-29 |
• INFORMATION ............................................................ |
E-2 |
• INITIALIZATION OF USER ADJUSTMENT VALUE .. |
E-35 |
Usage |
|
Others |
|
• USING THE REMOTE CONTROL............................... |
E-3 |
• CLEANING AND MAINTENANCE ............................. |
E-36 |
• CONNECTING THE DISPLAY TO EXTERNAL |
|
|
|
EQUIPMENT ................................................................ |
E-7 |
|
|
• BASIC OPERATIONS ................................................ |
E-12 |
|
|
• SELECTING INPUT MODE ....................................... |
E-14 |
|
|
• OTHER BASIC OPERATIONS .................................. |
E-16 |
|
|
• WATCHING PICTURES ON THE WIDE SCREEN.... |
E-17 |
|
|
Adjustments |
|
|
|
• ADJUSTMENT MENU................................................ |
E-19 |
|
|
• BASIC PROCEDURE OF ADJUSTMENT MENU |
|
|
|
OPERATIONS............................................................ |
E-20 |
|
|
• ADJUSTING THE PICTURE ...................................... |
E-21 |
|
|
• ADJUSTING SCREEN POSITION AND SIZE ........... |
E-27 |
|
|
• ADJUSTING AUDIO................................................... |
E-28 |
|
|
Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
*Installation and removal require special expertise. Consult your product dealer for details.
*When "English" is selected at "Language" of the on-screen display, "colour" will be displayed in the case of the R model and "color" will be displayed for all other models.
The notation used in this users' manual is "color".
Pусский Português Italiano Français Español Deutsch English