24V DRIVE, HIGH SPEED LINE THERMAL PRINTER
4” MECHANISM, WITH OR WITHOUT CUTTER
FTP-642MCL001/002
FTP-642MCL301/302
■ OVERVIEW
FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal printer driven by 24 VDC, printing on 4-inch wide paper (112 mm/114 mm) .
This printer is compact and light weight, and the design allows easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS terminals, ticket machines, coupon machines, label printers, medical instruments, etc. A printer with a specially designed cutter is also available.
■HIGHLIGHTS
•Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light weight of approximately 125 g.
• Low power consumption
The peak current for head driving is approximately 4.1 A (at 80 mm/s printing speed, 50% printing ratio).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut ) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
FTP-642MCL001
FTP-622CU101
FTP-622DCL001
1
■ DESIGNATION
|
|
Item |
|
Part number |
|
|
|
|
|
|
|
Printer mechanism |
Standard |
|
FTP-642MCL001/002*2 |
|
|
|
|
|
|
||
With Auto cutter |
|
FTP-642MCL301/302*3 |
|
||
|
|
|
|
||
|
|
|
|
|
|
Interface board |
Centronics Standard |
|
FTP-622DCL001/011*4 |
|
|
|
|
|
|
||
Serial (RS-232C) |
|
FTP-622DSL001/011*5 |
|
||
|
|
|
|
||
|
|
|
|
|
|
LSI(MCU) |
|
FTP-622CU101*6 |
|
||
|
|
|
|
|
|
|
|
Thermal head cable |
|
FTP-622Y001 |
|
|
|
|
|
|
|
Cables |
Parallel (centronics) Interface cable |
|
FTP-622Y201 |
|
|
|
|
|
|
||
Serial (RS-232C) Interface cable |
|
FTP-622Y301 |
|
||
|
|
|
|
||
|
|
|
|
|
|
|
|
Power cable |
|
FTP-622Y401 |
|
*2: |
001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path). |
|
|
||
*3: |
Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path). |
||||
*4: |
001 /011 supports ANK and 101 supports ANK + Kanji (pages 98-103). |
|
|
||
*5: |
001/011/012 supports ANK and 111 supports ANK + Kanji (pages 98-103). |
|
|
*6: CU101 supports Kanji and cutter control.
■ GENERAL SPECIFICATIONS
Item |
|
Specifications |
|||
|
|
|
|
|
|
Part number |
FTP-642MCL001/002 |
|
FTP-642MCL301/302 |
||
|
|
|
|
||
Printing method |
Thermal-sensitive line dot method |
||||
|
|
|
|
|
|
Dot structure |
832 dots/line |
|
|
||
|
|
|
|
||
Dot pitch (Horizontal) |
0.125 mm (8 dot/mm)—Dot density |
||||
|
|
|
|
||
Dot pitch (Vertical) |
0.125 mm (8 dot/mm)—Line feed pitch |
||||
|
|
|
|
|
|
Effective printing area |
104 mm |
|
|
||
|
|
|
|
|
|
Paper width |
MCL001/301 |
112 mm |
|
|
|
|
|
|
|
||
MCL002/302 |
114 mm |
|
|
||
|
|
|
|||
|
|
|
|
|
|
Paper thickness |
60~100 μm*1 |
|
60~100 μm*1 |
||
|
|
|
|
|
|
Cutting type |
----------- |
|
full or partial |
||
|
|
|
|
||
Number of columns |
69 columns/line (24×12 dot font) |
||||
|
|
|
|
|
|
Maximum printing speed |
640 dot line/s (80 mm/s) |
|
|
||
|
|
|
|
|
|
Character types |
Alphanumeric KANA: 159 |
|
International characters: 195 |
||
JIS KANJI (FTP-622DCL101/111): approx.6800 |
|||||
|
|
||||
|
|
|
|
|
|
Character composition, dimensions (H×W), |
24 × 12 dots, (3.0 × 1.5 mm), |
69 columns |
|||
24 × 24 dots, (3.0 × 3.0 mm), |
34 columns |
||||
Number of characters |
16 × 8 dots, (2.0 × 1.0 mm), 104 columns |
||||
|
|
16 × 16 dots, (2.0 × 2.0 mm), |
54 columns |
||
|
|
|
|
|
(Continued)
2
FTP-642MCL001/002/301/302
(Continued)
|
Item |
|
Specifications |
||
|
|
||||
|
|
|
|
||
Part number |
|
FTP-642MCL001/002 |
FTP-642MCL301/302 |
||
|
|
|
|
|
|
Interface |
|
Centronics (ESC/POSTM), RS232C |
|
|
|
|
|
|
|
|
|
|
|
24VDC ± 5%, Voltage |
|
|
|
|
|
Current : average*2 |
( ): Peak |
|
|
|
For head |
1.61 (2.03) A (at 80 mm/s printing speed, 25% printing ratio) |
|||
|
|
1.17 (2.03) A (at 50 mm/s printing speed, 25% printing ratio) |
|||
Power supply |
|
1.08 (1.16) A (at 30 mm/s printing speed, 25% printing ratio) |
|||
|
|
|
|
|
|
|
For motor |
24VDC ± 5%, 1.0 A maximum |
24VDC ± 5%, 1.0 A maximum |
||
|
|
|
|
||
|
For cutter |
---------- |
|
||
|
|
|
|
||
|
|
|
|
|
|
|
For logic |
5VDC ± 5%, 0.5 A maximum |
|
|
|
|
|
|
|
|
|
Dimension |
Mechanism (cutter) |
138 (W) × 48 (D) × 20 (H) mm (excluding lever) |
|
147 (W) × 69 (D) × 42 (H) mm (w/cutter) |
|
|
|
|
|
|
|
Interface board |
131 (W) × 89 (D) × 24 (H) mm |
|
|
||
|
|
|
|||
|
|
|
|
||
Weight (Mechanism+Cutter) |
approximately 125 g |
approximately 450 g (w/cutter) |
|||
|
|
|
|
||
|
Mechanism |
Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard |
|||
|
driving method) |
|
|
||
|
|
|
|
||
Expected life |
|
Wear resistance |
: 50 km (at 25% printing ratio) |
||
|
|
|
|
|
|
|
Cutter |
---------- |
|
3 × 105 cuts |
|
|
|
|
|
|
|
|
Operating temperature |
0 to +50°C*3 |
|
|
|
Environmental |
|
|
|
|
|
Operating humidity |
20 to 85% RH (no condensation) |
|
|
||
conditions |
|
|
|||
|
|
|
|
|
|
|
Storage temperature |
–20 to +60°C (excluding paper) |
|
|
|
|
|
|
|
|
|
|
Storage humidity |
5 to 95% RH (no condensation) |
|
|
|
|
|
|
|
||
|
Head temperature |
By thermistor (applied energy control, abnormal temperature detection) |
|||
|
|
|
|
|
|
Detection |
Paper out/Mark detect |
By photointerrupter |
|
|
|
|
|
|
|
|
|
|
Head-up |
By microswitch |
|
|
|
|
|
|
|
|
|
|
|
For front insertion use (112 mm width) |
: FTP-040PU001, FTP-040P0701 |
||
Recommended thermal sensitive paper |
For rear insertion use (114 mm width) |
: FTP-040P0020, FTP-040P0702 |
|||
|
|
*Recommended papers |
|
|
|
|
|
· Oji paper |
|
|
: PD150R, PD160R, PD170R |
|
|
· NIPPON paper |
|
|
: TF50KS-E,TF60KS-E,TF60KJ-R |
|
|
· MITSUBISHI paper Mills |
|
: P220VBB-1, AFP-235 |
|
|
|
|
|
|
|
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance. *3: Guarantee: +5°C ~+40°C.
3