FSR DV-HDA-14AUD User Manual

DV-HDA-14AUD 1x4 HDMI Distribution Amplifier Manual

244 Bergen Blvd Woodland Park NJ 07424  973-785-4347  www.fsrinc.com

43226 LIT1573

PROPRIETARY INFORMATION

All information in this manual is proprietary to and the property of FSR Inc. This
publication is protected by the Federal Copyright Law, with all rights reserved. No
part of this document may be reproduced, transcribed, or transmitted, in any form
or by any means, without prior explicit written permission from FSR Inc.

UNPACKING

The DV-HDA-14AUD package includes the following items:

 DV-HDA-14AUD 1x4 HDMI Distribution Amplifier
 12VDC 1A Power Supply with locking connector
 Under Table Mounting Brackets
 User’s Manual

 HDMIisatrademarkofHDMIlicensing,LLC.

 Specificationsmaybechangedwithoutanynoticeinordertoimprovethe

functionoftheproduct.

2

LIMITED WARRANTY

The DV-HDA-14AUD 1x4 HDMI Distribution Amplifier is warranted against failures due to
defective parts or faulty workmanship for a period of three years after delivery to the
original owner. During this period, FSR will make any necessary repairs or replace the
unit without charge for parts or labor. Shipping charges to the factory or repair station
must be prepaid by the owner, return-shipping charges (via UPS Ground) will be paid by
FSR.

This warranty applies only to the original owner and is not transferable. In
addition, it does not apply to repairs done by other than the FSR factory or
Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been
subjected to physical abuse or has been modified in any way without written authorization
from FSR. FSR’s liability under this warranty is limited to repair or replacement of the
defective unit.
FSR will not be responsible for incidental or consequential damages resulting from the
use or misuse of its products. Some states do not allow the exclusion of incidental or
consequential damages, so the above limitations may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state
to state.
Warranty claims should be accompanied by a copy of the original purchase invoice
showing the purchase date (if a Warranty Registration Card was mailed in at the time of
purchase, this is not necessary). Before returning any equipment for repair, please read
the important information on service below.
SERVICE
Before returning any equipment for repair, please be sure that it is adequately packed
and cushioned against damage in shipment, and that it is insured. We suggest that you
save the original packaging and use it to ship the product for servicing. Also, please
enclose a note giving your name, address, phone number and a description of the
problem.
NOTE: all equipment being returned for repair must have a Return authorization (RMA)
Number. To get a RMA Number, please call the FSR Service Department
(1-800-332-FSR1). Please display your RMA Number prominently on the front of all
packages.

CONTACT INFORMATION

FSR INC.

244 Bergen Blvd.

Woodland Park, NJ 07424

Phone: [phone]

Order Desk Fax: [phone]

E-mail: [e-mail]

Web Site: www.fsrinc.com

3

SURGE PROTECTION DEVICE RECOMMENDED

This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the life
of your equipment.

SAFETY

 All the safety and user manual should be read before the appliance is

operated.

 The safety and operating instructions should be retained for future

reference.

 Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

 Do not use this equipment near a wet area.
 This product should be operated only from the type of power sources

indicated on the marking label. If you are not sure of the type of power
supplied to your home, consult your local power company.

 This equipment may be equipped with a 3 wire grounding-type plug, a plug

having a third (grounding) pin. This pin will only fit in to a grounding type
power outlet. This is a safety feature. If you are unable to insert the plug in to
the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the grounding-type plug.

 Openings on the case are provided for ventilation and to ensure reliable

operation of the equipment and to protect it from overheating. The openings
should never be blocked.

 Do not use any damaged power cords or plugs, or loosed outlets, this may

cause electrical shock or fire.

 Do not put heavy articles such as other equipment on this product. Keep it

away from liquid, magnetic and flammable substances.

4

Table of Contents

PROPRIETARY INFORMATION ..................................................................... 2

UNPACKING ................................................................................................... 2

LIMITED WARRANTY ..................................................................................... 3

SAFETY ........................................................................................................... 4

DESCRIPTION ................................................................................................ 6

APPLICATION DIAGRAM ............................................................................... 7

FRONT PANEL LAYOUT AND OPERATON ................................................... 8

FRONT PANEL .................................................................................................................. 8

BACK PANEL .................................................................................................................... 8

DIP SWITCH EDID SETTING: .......................................................................................... 9

SPECIFICATIONS: ........................................................................................ 10



5

DESCRIPTION:

The DV-HDA-14AUD 1x4 HDMI Distribution Amplifier splits a single DVI or HDMI audio/video
source for display on four identical outputs, supporting 1080p Full HD up to 4K@30Hz UHD plus
all 3D formats, along with multichannel digital audio formats such as Dolby® True HD and
DTS-HD® Master Audio™. A built in audio extractor circuit decodes stereo audio from the HDMI
stream, providing analog audio out on a pair of RCA connectors, while maintaining the original
signal in the HDMI stream..

Features:

 Supports resolutions up to 1080p@60Hz, 4K@30Hz, 36-bit deep color
 Splits a HDMI source to 4 outputs without loss
 Extract the audio from HDMI source via analog outputs.
 Dolby TrueHD and DTS-HD master audio pass through on HDMI output
 Advanced EDID management for rapid integration of sources and displays
 LEDs for power-on, input, and outputs indication.
 Easy installation with included Under Table Mounting Brackets
 Small compact size
 Full 3D pass- through.
 HDCP compliant

6

APPLICATION DIAGRAM

7

2

1

3 4 5 2 1 3

FRONT PANEL LAYOUT AND OPERATON

Front Panel

1. Power LED indicator---Indicate the status of the power for the unit.

2. Input LED indicator ---Indicate the status of the input for the unit.

3. Output LED indicator --- Indicate the status of the output for the unit.

Back Panel

1. HDMI input--- Connect to HDMI source.

2. HDMI outputs 1 to 4---Connect to display(s).

3. Stereo audio out ---RCA connector pair, extracts audio from HDMI input, will mute if source is
configured for multichannel audio

4. DIP switch--- EDID management.

5. Power port--- Use included 12 VDC adaptor to power the unit.

8

DIP switch EDID setting:

[DIP]=0000: Copy EDID From Output1, i.e., EDID pass through**

[DIP]=0001: HDMI 1080p@60Hz, Audio 2CH PCM
[DIP]=0010: HDMI 1080p@60Hz, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=0011: HDMI 1080p@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD

[DIP]=0100: HDMI 1080i@60Hz, Audio 2CH PCM
[DIP]=0101: HDMI 1080i@60Hz, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=0110: HDMI 1080i@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD

[DIP]=0111: HDMI 1080p@60Hz/3D, Audio 2CH PCM
[DIP]=1000: HDMI 1080p@60Hz/3D, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=1001: HDMI 1080p@60Hz/3D, Audio 7.1CH PCM/DTS/DOLBY/HD

[DIP]=1010: HDMI 4K2K, Audio 2CH PCM
[DIP]=1011: HDMI 4K2K, Audio 5.1CH PCM/DTS/DOLBY
[DIP]=1100: HDMI 4K2K, Audio 7.1CH PCM/DTS/DOLBY/HD

[DIP]=1101: DVI 1280x1024@60Hz, Audio None
[DIP]=1110: DVI 1920x1080@60Hz, Audio None
[DIP]=1111: DVI 1920x1200@60Hz, Audio None

**When in EDID pass through mode, a display must be connected to Output
1 in order for the audio extraction circuit to work.

9

r

A

SPECIFICATIONS:

Bandwidth: 2.97Gbps per colo

Video Input Connectors: 1x HDMI Type A, 19-pin, female

Video Output Connectors: 4x HDMI Type A, 19-pin, female

Audio Output Connectors

EDID: 4-PIN DIP switch

Rack-Mountable:

Dimensions (W x H x D):

Shipping Weight:

Operating Temperature:

Storage Temperature :
Power Requirements:

Under Table Mounting Brackets included

7.72" (196mm) x 3.15" (80mm) x 0.87" (22mm )

2x RCA Female

0.88 lbs. (0.4kg)

32°F to 104°F (0°C to 40°C)

-4°F to 140°F (-20°C to 60°C)
12DC/0.5

10