Evolution ASP
E 2M hd asp
Franke Coffee Systems Americas
800 Aviation Parkway
Smyrna, TN USA 37167
Tel: 1 800 310 5710
Fax: 1 615 793 5940
email: fs-coffeesales.us@franke.com 13” wide www.us.franke-cs.com
1” minimum clearance on sides and rear of machine
Cabinet
3/8” Braided stainless steel cold water supply line
Water filter supplied with espresso machine
16mm (3/8”) Vented drain
Water and drain within 5’
Floor drain
10” of clearance |
|
recommended |
|
above grinder |
|
(5” minimum) |
21/2” diameter hole |
|
for utility lines |
35” high
Receptacle
within 3’. Plug is included with machine.
118” - 22”
All electrical and plumbing must meet local codes Please refer to specification sheets for your machine
Receptacle required for espresso
L6-30R
© 2011 - Franke Coffee Systems Americas - This document is the confidential and proprietary property of Franke Coffee Systems Americas, and shall not be reproduced in any form of media without the expressed written permission of a Franke Coffee Systems Americas representative. Due to continuous product development, Franke Coffee Systems Americas reserves the right to make changesindesignandspecificationwithoutpriornotice.REV19Sep2011•G80005476FCGEvolutionASPInstallguide•UnderlicenseofFrankeTechnologyandTrademark,Ltd.Switzerland.PrintedinU.S.A.
Unit |
Height |
Width |
Depth |
Ship weight |
Voltage/Phase/Cycle |
Wattage |
Amp Load |
Amp Circuit |
Plug |
Water line |
Water hardness Drain |
|||
Espresso |
35” |
13” |
24” |
135 lbs |
208-240/1/60 |
4800 |
24 A |
30 A |
NEMA |
G 3/8” |
1-5 gpg |
16mm ID |
||
890mm |
320mm |
600mm |
61 kg |
L6-30P |
vented |
|||||||||
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|