Foster HRB120, HR410, HR240, HR 360, HR 200 User Manual

...
0 (0)

operating instructions

Foster European Operations

France

Foster Refrigerator France SA

Tel: (33) 01 34 30 22 22 Fax: (33) 01 30 37 68 74 Email: info@fosterfrance.com

Germany

Foster Refrigerator Germany

Tel: (0781) 96 93 00 Fax: (0781) 96 93 019 Email: info@fosterrefrigerator.de

Foster Refrigerator

Oldmedow Road, King’s Lynn,

Norfolk, PE30 4JU

England

Tel: 01553 691122

Fax: 01553 691447

Website: www.fosterrefrigerator.co.uk

Email: sales@foster-uk.com

a Division of ITW (UK) Ltd.

HRLR150-200-360-410/OP/02-05 00-554887

 

 

 

 

 

HR120 LR120 / HRB120 LRB120 / HR140 LR140 /

 

 

 

 

 

HR150 LR150 / HR 200 LR 200 / HR240 LR240 /

 

 

 

 

 

HR 360 LR 360

 

 

 

 

 

undercounter cabinets

 

 

 

 

 

HR410 LR410 cabinets

 

 

 

 

 

installation and operating instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GB

 

Operating instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

 

Notice d'installation et

d'utilisation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

Bedienungsanleitung

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N

 

Gebruiksaanwijzing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Foster HRB120, HR410, HR240, HR 360, HR 200 User Manual

 

GB

english

 

 

start up & operation

 

 

 

 

 

5. Switching On

 

 

 

 

 

installation

If the cabinet has been laid on its back at any time

 

DO NOT switch on immediately

 

 

 

 

 

IMPORTANT:

upright position for at least

 

 

 

 

 

To the installer: Installation of these units

 

 

 

 

 

 

 

should be carried out by a competent

user operation guidelines

 

practice adhered to, thus ensuring safe

 

person and the appropriate codes of

 

 

 

 

 

 

 

installation. Pass to the user: Do not

6. Initial Start Up

 

 

 

 

 

discard this document. It contains

 

 

 

 

 

important guidelines on Operation,

Insert the fused mains plug into the wall socket and

 

Loading, Cleaning and Maintenance

 

switch on at the mains. The cabinet will start

 

and should be kept for reference.

 

DISPOSAL REQUIREMENTS

automatically and display the actual internal

 

temperature, as the operating temperature has been

 

If not disposed of properly all refrigerators

pre-set. Allow the cabinet to reach its normal

 

have components that can be harmful to

operating temperature before loading.

 

the environment. All old refrigerators must

7. To Change Temperature Setting

 

be disposed of by appropriately registered

 

and licensed waste contractors, and in

 

Button 1

Button 2

 

 

 

accordance with National laws and

 

 

 

 

regulations.

 

 

 

 

 

 

 

 

 

 

 

1. Positioning/unpacking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Important:

 

Ensure a minimum clearance

 

of 25mm above and beside

the cabinet for ventilation

BLT 12RU

and efficient operation.

Where possible, ensure the

Button 3

cabinet is not adjacent to a

heat source.

It will not normally be neccessary to change the setting

 

Remove the shrinkwrapping,

however should this be neccessary:

cardboard corner protectors,

1. Check storage temperature setting

cardboard lid and packaging

from the door opening

Press button 1 and hold

surround making sure that

Display Shows: Temperature Setting

any sharp instrument used

 

does not cause damage, plus

 

remove any Quality labels. Documentation is inserted

2. Increase storage temperature

into a clear pocket located inside the cabinet.

Press button 1 and hold

To remove from pallet, cut the cable ties situated

Display Shows: Temperature Setting (flashing)

through the base plate slot that hold the cabinet to

Press button 2 to increase Temperature Setting

the pallet.

2. Feet

Release both buttons.

 

Models are supplied with adjustable

3. Lower storage temperature

levelling feet already fitted.

Press button 1 and hold

 

3. Shelf Supports

Display Shows: Temperature Setting

Press button 3 to decrease Temperature Setting

 

The HR140, LR140 / HR150 / HR200, LR200 / HR360, LR360 / HR 410, are supplied with slotted removable shelf supports allowing flexible shelf partitions. The rear supports have an inbuilt ‘slot’ to prevent the shelf from damaging the rear air duct. The LR150 / LR 410 is supplied with fixed freezer shelves.

Release both buttons.

Lock

the door, insert the key and turn straight through 90˚.

Light (Where fitted)

ON/OFF switch is located on the front of the light fitting.

Shelf supports for models

HRB120, LRB120 / HR120, LR120 / HR240, LR240

4. Defrosting

The HR150 / HR 410 is fitted with an automatic defrost function ensuring the cooling plate remains free from ice. The condensate water is automatically dispersed using the heat from the refrigeration unit. The LR150 / LR 410, being static freezer shelves, requires manual defrosting. All the stored product should be removed and placed in a separate freezer storage cabinet. Switch off at the mains electric supply. Leave the door open and place bowls inside to catch the water as the freezer shelves defrost.Once fully defrosted dry the inside of the cabinet and switch on again. Do not replace the frozen food until the cabinet has reached its normal operating temperature.

WARNING: Do not use any sharp instruments or heat to remove the ice from the freezer shelf as this may cause damage.

2

loading

10. Airflow

When loaded, ensure that

circulate around /

through stored products.

11. Load Distribution

Evenly distribute the load (max 25kg per shelf or

maximum load 50kg 25Kg whichever is the highest).

12. Food

all foods and

raw and cooked

.

cleaning/maintenance

. Before internal cleaning, un-plug cabinet from the mains supply.

Cleaning Instructions

for correctly the cabinet will retain its for many years.

Exterior: wipe with a warm damp cloth followed by a clean damp cloth

thoroughly dry.

Steel Exterior: use a proprietary steel cleaner following the

instructions.

Interior: to be washed with water, rinsed and dried thoroughly.

alkaline cleaning agent or those bleaches, acids and chlorines are

harmful to stainless steel. Corrosion and may result from their accidental or

application.

of these liquids should come into with the cabinet during general

cleaning, wipe down the affected area with clean water and rub dry.

use wire wool or scouring powders on surface. After cleaning allow the cabinet

its normal operating temperature reloading with product. During usage

spills should be wiped clean immediately care should be taken not to touch the

of the freezer cabinet as warm skin ‘freeze’ to metal.

Door Gaskets

should be inspected on a regular basis and if damaged. To clean, wipe with a warm soapy cloth followed by a clean damp cloth finally thoroughly dry before closing the door.

Shelf Supports & Shelves - All Models

the shelves and shelf support (by

fixing screw). The shelves are dishwasher however wash the vertical supports with

soapy water, rinse and thoroughly dry before

.

operational failure

16. Problem Diagnosis

Checks must be carried out by a competent person.

Before calling a Foster Authorised Service

Company check the following:

Power failure (may be off at source)

Damaged mains lead plug.

When requesting service assistance always quote following:

cabinet serial number (E..........) cabinet model number

taken from the serial plate located inside the cabinet.

7

Loading...
+ 2 hidden pages