Fossil Fossil Watch Instruction Manual

4.2 (5)

MISCELLANEOUS

Water Resistance

See caseback for water resistance rating for traditional watches and Hybrid Smartwatches. For Display Smartwatches visit fossilgroup.com/water for water resistance information.

The water resistance rating provides guidelines for appropriate water-related exposure to avoid damage to internal watch components. Please see chart for recommended usage guidelines.

In order to ensure water does not enter the watch and cause damage to it, please follow the instructions listed below:

Do not adjust the crown while the timepiece is in contact with water.

Ensure the crown is in the closed position before contact with water. For timepieces with screw-down crowns, ensure the crown is completely tightened before contact with water.

For timepieces with pusher-enabled functionality, do not engage the function underwater.

Exposure to extreme atmopheres is not recommended (i.e. hot water, saunas or steam rooms).

Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves or waterfalls).

Avoid long exposure to salt water. After contact with salt water, rinse watch under tap water if rated 5ATM or higher and wipe dry with a soft cloth.

RECOMMENDATIONS FOR WATER-RELATED USE

SPLASH RESISTANT SUBMERSIBLE

SHALLOW DIVING

SCUBA DIVING

INDICATION

(Hand Washing)

(Swimming)

(Snorkeling)

(Not Deep Sea)

(NONE)

3 ATM • 3 BAR • 30 Meters

5 ATM • 5 BAR • 50 Meters

10 ATM • 10 BAR • 100 Meters

20 ATM • 20 BAR • 200 Meters

- 1 -

Fossil Fossil Watch Instruction Manual

For older movements, please contact Customer Care in your market. Contact information is located on the Customer Care page of the website.

ANALOG

2 Hand Movement 762.3 / 762.4

Time and Date Setting

1.Pull crown out to position 2 and turn to set hour and minute hands.

2.Return crown to position 1.

NOTE: Large indicator shows hours; minutes are indicated by black arrow on disc.

HOUR HAND

MINUTE HAND

1 2

762.4

762.3

ENGLISH

1 2

3 Hand / 3 Hand Date

Date Setting

1.Pull the crown out to position 2.

2.Turn the crown either clockwise or counter-clockwise and set the date for the previous day.

The direction that moves the date varies on different watch models.

Time Setting

1.Pull crown out to position 3.

2.Turn counter-clockwise to advance the time and continue until the day changes to the present day.

3.Set to the correct time.

4.Push crown back to position 1.

NOTE: If watch has no date function, pull crown out to position 2 for time setting.

1 2

DATE

1 2 3

1 2 3

DATE

3 Hand with Sun-Moon Dial PC39A / 6P24

1.Pull crown out to position 2.

2.Turn crown to set hour and minute hands.

NOTE: Sun/Moon disc moves in conjunction with hour and minute hands and will indicate AM/PM time.

3.Return crown to position 1.

3 Hand Day-Date VJ55A / VX43

Day Setting

1.Pull crown out to position 2.

2.Turn crown clockwise until correct day is shown in day window.

3.Return crown to position 1.

NOTE FOR VX43:

Sunday: Round window will be solid color (showing full moon). Monday - Friday: As watch adjusts Monday through

Friday, the round window will show a crescent moon, where the bottom of moon coordinates with the specific day in the window underneath. Crescent moon will decrease in size when adjusting from beginning to end of week.

Saturday: Window will be solid color (with no moon).

Time and Date Setting

1.Pull crown out to position 3.

2.Turn crown counter-clockwise until correct time is shown.

3.Turn crown clockwise 24 hours until correct date is shown.

4.Return crown to position 1.

1 2

DAY

1 2 3

DATE

VJ55A

DATE

1 2 3

DAY

VX43

revised 1 / 16

- 2 -

3 Hand with Alarm Function ISA 8176-1990

Time Setting

1. Pull crown out to position 3.

2. Turn crown clockwise to advance hour and minute hands. A 3. Return crown to position 1.

Alarm Setting

 

 

1.

Pull crown out to position 2.

3 2 1

ALARM HAND

2.

Turn crown counter-clockwise to set alarm hand position.

 

 

 

3.

Return crown to position 1.

 

 

Alarm Function

1.Press A to toggle alarm on/off. Alarm will beep twice to indicate alarm “on,” and will beep once to indicate alarm “off.”

2.Alarm will sound for 15 seconds. Push A to silence alarm.

NOTE: If A is not pressed, alarm will sound again in one minute.

Retrograde with Date Sweep VD86A / VD85J

Time and Date Setting

1.Pull crown out to position 3 and rotate clockwise to set day of week. Hand in upper left indicates weekday and will automatically reset to “M” at the end of the week.

2.Keeping crown in position 3, rotate hands to set the time (make sure am/pm is set correctly).

3.Push crown back to position 1.

4.Pull crown out to position 2 and rotate counter-clockwise to set date.

5.Push crown back to position 1.

WEEKDAY

DATE

 

1 2 3

SECOND HAND

VD86A

WEEKDAY

DATE

 

1 2 3

SECOND HAND

VD85J

Retrograde Three Hand Date with Day Indicator JR00

Time, Date and Weekday Setting

1.Pull crown out to position 2 and turn counter-clockwise to set date to the previous day.

2.Turn crown clockwise to set weekday to the previous day.

NOTE: Weekday indicator will automatically reset to “M” at the end of the weekday cycle.

3.Pull crown out to position 3 and turn clockwise until the present date and weekday are displayed. Continue turning crown to set the correct AM/PM time.

4.Return crown to position 1.

NOTE: To ensure accuracy, do not set the date and weekday between 10:00 PM and 1:00 AM.

24-HOUR

DATE

1 2 3

WEEKDAY

3 Hand Dual Time 9238 / 1980

Time Setting

1. Pull crown out to position 2.

2. Turn crown to advance hour and minute hands.

3. Return crown to position 1.

Dual Time Setting

DUAL TIME

 

Press A to advance to desired time.

 

- 3 -

Dual Time VX01

Setting Time A

 

 

 

 

 

 

 

 

1.

Pull crown A out to position 2 when the second hand is at the 12 o’clock position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Turn crown to set desired time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Return crown to position 1.

 

 

 

 

 

TIME B

 

TIME A

 

 

 

 

 

Setting Time B

1.Pull crown B out to position 2 when the second hand is at the 12 o’clock position.

2.Turn crown to set desired time.

3.Return crown to position 1.

NOTE: When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.

Dual Time VX00A2

To set hour or minutes:

1.Crown “A” sets hour

2.Crown “B” sets minute

3.Pull crown out to first position

4.Turn clock-wise to set hour or minute

5.Push crown back to normal position

A B 2 1 1 2

Dual Time VD31

Adjusting Dual Time Hands Position

After setting or changing the battery and before setting the time, make sure the dual time hour hand is at the 24 o’clock position. If the dual time hour hand is not at the 24 o’clock position, reset it by following the below instructions.

1.Pull crown out to position

2.Press and hold A and B for 2 seconds to reset the dual time hour hand.

3.Press A to advance the dual time hour hand in a counter-clockwise direction.

4.Press B to advance the dual time hour hand in a clockwise direction.

5.Push crown in to position 1

24 HOUR HAND

 

A

 

 

DUAL TIME HOUR

 

 

 

HAND (24hr)

1

2

3

 

B

DATE

Local Time Setting

Before setting the time, make sure the second hand is at the 12:00 position.

1.Pull crown out to position 3.

2.Turn crown clockwise to advance hour and minute hands.

3.Push crown back to position 1.

NOTE: 24 hour hand moves correspondingly with hour hand. When setting the time be sure to check that the 24 hour hand is set properly. 24 hour hand will indicate AM or PM time.

Dual Time Setting

Time Zone Setting

1.With crown at position 1.

2.Press A to set the time 1 hour back. Press B to set the time 1 hour forward. Each time A is pressed it indicates – 1 hour; each time B is pressed it indicates + 1 hour.

Precise adjustment of the Dual Time

1.Pull crown out to position 3 when the second hand is in the 12 o’clock position.

2.PressAtosetthetime10minutesback.PressBtosetthetime10minutesforward.EachtimeAispresseditindicates–10minutes;eachtimeBispresseditindicates

+ 10 minutes.

3.Push crown in to position 1.

Date Setting

Before setting the date, make sure the time is set first.

1.Pull crown out to position 2.

2.Turn crown clockwise to advance to the desired date.

3.Push crown in to position 1.

NOTE: If the date is set between the hours of 9:00 PM and 1:00 AM, the date may not change on the following day. Do not set the date between 9:00 PM and 1:00 AM to ensure accuracy.

If the date is set between 9:00 PM and 1:00 AM; first change the time to any other time outside those hours. Set the date, then reset the time to the appropriate time.

- 4 -

ANALOG - DIGITAL

Ana-Digi FL1331A

Normal Time Display

1.Press A or B for EL.

2.Press and hold A or B for 2 seconds to turn digital display off. Press any pusher to turn on the display when it is off.

3.Press C to toggle 12/24-hour format. Display will show “AM” or “PM” for 12hour format.

4.Press D to change mode. Mode sequence is time, date, chronograph, alarm.

NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will be saved and the setting will automatically return to display mode.

Time and Calendar Setting

1.In normal time display or calendar display, press and hold C for 2 seconds, year will begin flashing.

2.Press D to advance digits; press and hold D for fast advance.

3.Press C to advance to next setting value.

4.Setting sequence is: year, month, date, hour, minute, seconds.

5.Press C to exit setting mode.

NOTE: Weekday will automatically update upon exiting setting mode.

BC

AD

Alarm Mode

1.Press D to change to alarm mode.

2.Press C to toggle alarm/chime on/off.

3.Alarm will sound at preset time for 20 seconds; press any pusher to silence alarm.

Alarm Setting

Chronograph Mode

1.Press D to change to chronograph mode.

2.Press D and hold 2 seconds to reset chronograph to zero.

3.Press C to start/stop the chronograph.

4.Press D to reset to zero.

1.In alarm mode, press and hold C for 3 seconds; hour will begin flashing.

2.Press D to advance digit; press and hold D for fast advance.

3.Press C to set and advance to minute.

4.Press D to advance digit; press and hold D for fast advance.

5.Press C to exit setting mode.

Ana-Digi FL202

Normal Time Display

1.Press A to toggle 12/24H format.

2.Press B to change display mode. Display mode sequence is time, calendar, seconds.

Time/Calendar Setting

1.From any display mode, press and hold A to enter setting mode; year will begin flashing.

2.Press B to advance setting value. Press and hold B for fast advance.

3.Press A to set and advance to next setting value.

4.Setting sequence is: year, month, date, hour, minute.

5.Setting will automatically return to display mode after minute is set, or if no pusher is operated for 30 seconds.

NOTE: When setting hour, digits are in 24-hour display.

B

A

- 5 -

Ana-Digi QFL133

Normal Time Display

1.Press A to change mode. Mode sequence is normal time display, alarm, chronograph, and time/calendar setting.

2.Press B for EL.

3.Press C to toggle 12/24-hour time.

NOTE: In any setting mode, if no pusher is operated for 2 minutes, all changes will be saved and the setting will automatically return to normal time display.

Time and Calendar Setting

1.Press A to change to time/calendar setting mode; seconds will begin flashing.

2.Press C to set seconds to zero.

3.Press D to advance to next setting value.

4.Press C to increase digit, press and hold C for fast advance.

5.Setting sequence is: seconds, hour, minute, month, date and weekday.

6.Press A to exit setting mode.

Alarm Mode

1.Press A to change to alarm mode.

2.Press C to toggle alarm/chime on/off.

3.Alarm will sound at preset time for 20 seconds; press C or D to silence alarm.

Alarm Setting

1.In alarm mode, press D to enter setting mode; hour will begin flashing.

2.Press C to increase hour; press and hold C for fast advance.

3.Press D to set and advance to minutes.

4.Press C to increase minutes; press and hold C for fast advance.

5.Press D to save data and exit setting mode; press A to save data, exit setting mode, and return to normal time display.

B C

A D

Chronograph Mode

1.Press A to change to chronograph mode.

2.Press C to start/stop the chronograph.

3.Press D to reset to zero.

Split Time

1.Press D while the chronograph is running for split time.

2.Press D again to return to chronograph.

3.Repeat steps 1 and 2 to measure multiple split times.

4.Press C to finalize timing.

5.Press D to reset to zero.

Ana-Digi QFO-017 / Y121E6, QFO-016 / Y121E4

Time and Calendar Setting

1.Press A for EL.

2.Press and hold C for 2 seconds for the time setting state and you will see the seconds flashing.

3.Press D to reset time to zero.

4.Press B to toggle through the following setting sequence:

Second – Minute – Hour – 12/24-hour format – Month – Day – Year

5.Press D to adjust the flashing item.

6.The day of the week is automatically displayed in accordance with the date (month, day, year).

7.Press C to return to Real Time Mode.

Alarm Mode

1.Press B to change to alarm mode.

2.Press D to turn on/off the Alarm or Chime.

3.Alarm will sound at preset time for 20 seconds.

Alarm Setting

1.In alarm mode, press and hold C for 2 seconds to select the “Hour” setting.

2.Press B to select the “Minute” setting.

3.Press D to adjust the flashing item.

Chronograph Mode

1.Press B to change to chronograph mode.

2.Press D to start/stop the chronograph.

3.Press C and hold to reset chronograph to zero.

4.Press C while chronograph is running to display split count.

5.Press D to exit the split count and stop counting.

6.Press C and hold to reset chronograph to zero.

A

D

A

D

B

C

B

C

 

QFO-017 / Y121E6

 

QFO-016 / Y121E4

Countdown Timer

1.Press B to change to timer mode.

2.Press and hold C for 2 seconds to display the timer setting.

3.Press B to select “Hour” or “Minute” and press D to adjust the flashing item.

4.Press C to complete the setting.

5.Press D to start/stop the timer.

6.Press C and hold to reset the timer.

Dual Time

1.Press D to change to dual time mode.

2.Press and hold C for 2 seconds to select the “Minute” setting.

3.Press B to select the “Hour” setting.

4.Press D to adjust the flashing item.

5.Press C again to complete the setting.

- 6 -

World Time Module (Analog-Digital and Digital)

Normal Time Display

1.Press pusher B for EL.

2.Press pusher C for hourly chime on/off.

3.Press pusher D for DST on/off for the selected city.

4.In any mode or setting, if no pusher is operated for 60 seconds, setting will be returned to normal time display.

Time and Calendar Mode

1.Press and hold pusher B for 2 seconds to enter setting mode. 12/24 hour time will begin flashing.

2.Press pusher C to select 12/24 hour time.

3.Press pusher A to select and change seconds, minute, hour, year, month, day and city.

4.Press pusher C to increase the digit; press pusher D to decrease the digit.

5.Press pusher B to exit setting mode.

World Time Mode

1.Press pusher A to select world time mode.

2.Press pusher C to select city.

3.Press pusher D for DST on/off for the selected city.

Words

City

Hour Difference

Words

City

Hour Difference

MDY

Midway

-11 hours

PAR

Paris

+1 hour

HNL

Honolulu

-10 hours

CAI

Cairo

+2 hours

ANC

Anchorage

-9 hours

MOW

Moscow

+3 hours

LAX

Los Angeles

-8 hours

DXB

Dubai

+4 hours

DEN

Denver

-7 hours

KHI

Karachi

+5 hours

CHI

Chicago

-6 hours

DAC

Dacca

+6 hours

NYC

New York

-5 hours

BKK

Bangkok

+7 hours

CCS

Caracas

-4 hours

HKG

Hong Kong

+8 hours

RIO

Rio de Janeiro

-3 hours

TYO

Tokyo

+9 hours

-2H

-2H

-2 hours

SYD

Sydney

+10 hours

-1H

-1H

-1 hour

NOU

Noumea

+11 hours

LON

London

0 hours

AKL

Auchland

+12 hours

 

 

 

 

 

 

Alarm Setting (3 alarms)

1.Press pusher A to select alarm mode.

2.Press pusher C to scroll through alarms.

3.Press pusher D for alarm on/off.

4.Press and hold pusher B for 2 seconds to enter setting mode. Minutes will begin flashing.

5.Press pusher A to select minutes and hour.

6.Press pusher C to increase the digit; press pusher D to decrease the digit. Alarm is automatically turned on when setting is changed.

7.Press pusher B to exit setting mode.

Chronograph Mode

1.Press pusher A to select chronograph mode (STW).

2.Press pusher C to start chronograph; press pusher D to stop chronograph.

3.Press pusher D to reset chronograph when it is not running.

Lap Counting

1.Press pusher C while chronograph is running (will record up to 20 laps).

2.Press pusher D to finalize timing.

3.Press pusher A to recall laps (TOT) when information is recorded in the chronograph (will recall up to 20 laps).

4.Press pusher C to view next lap; press pusher D to view previous lap.

5.Enter regular chronograph mode; press pusher D to reset to zero.

Countdown Timer

1.Press pusher A to select timer mode.

2.Press pusher C to start/stop the timer.

3.Press pusher D to reset timer when it is not running. Timer will show all zero’s before timer is started again.

4.Press and hold pusher B for 2 seconds to enter setting mode. Seconds will begin flashing.

5.Press pusher A to select seconds, minutes and hour.

6.Press pusher C to increase digit; press pusher D to decrease digit.

7.Press pusher B to exit setting mode.

B C

AD

BC

A D

- 7 -

Digital QFO-020

Time and Calendar Setting

1.Press and hold A for 2 seconds to enter the setting mode.

2.Press B to toggle through the following sequence: Light – Chime – 12/24-hour – Hour – Minute – Second – Year – Mo-Day –

Month – Day

3.Press C or D to adjust the item displayed.

4.Press and hold C or D for fast advance.

5.Press A to exit from setting mode.

AD

BC

6.AEL displayed on the home screen signals the light is turned on. Press any pusher to activate light.

7. displayed on the home screen indicates the chime is turned on. Chime sounds every hour on the hour.

8.In normal time display mode press C to display KEY on the home screen. When KEY is displayed a beep occurs with each press of a pusher.

9.NOTE: In any setting mode, if no pusher is operated for 30 seconds, all changes will be saved and the setting will automatically return to normal time display mode.

Dual Time

1.Press and hold D for 2 seconds to enter Dual Time mode.

2.Press and hold A for 2 seconds to enter time zone.

3.Press C to decrease value and D to increase value of the time difference. Press and hold C or D for fast advance.

4.Press A to exit time zone setting screen.

5.Press and hold D to exit Dual Time Mode.

Chronograph

1.Press B to enter Chronograph mode.

2.Press D to stop/start the chronograph.

3.Press and hold C when chronograph is stopped to reset chronograph to zero.

4.Press C while chronograph is counting to enter LAP mode. LAP time will display on the screen for 8 seconds then display the next LAP time counting. Up to 10 LAP records can

5.be saved.

6.Press A to enter memory mode. Press A in memory mode to view each group of LAP times.

7.When chronograph is stopped press and hold C for 2 seconds to clear all previous records.

8.Press C to exit memory mode.

Countdown times

1.There are three countdown modes: CD-STP, CD-REP, and CD-UP.

2.In CD-STP mode the countdown timer alarm sounds when time expires and automatically returns to the time display mode.

3.In CD-REP mode the countdown timer alarm sounds when time has expired and automatically begins another count down time. Up to 100 countdown sets can be completed.

4.In the CD-UP mode the countdown timer alarm sounds when time expires and automatically begins counting up.

Countdown Timer Settings

1.Press B to enter Timer mode.

2.Press and hold A for 2 seconds.

3.Press D to toggle through the following sequence: CD-STP, CD-REP and CD-UP

4.Press and hold A for 2 seconds in any mode to choose mode and set countdown time.

5.Press B to toggle through the following sequence: Hour – Minute – Second

6.Press C to decrease value and D to increase value. Press and hold C or D for fast advance.

7.Press A to exit Timer setting mode.

8.Press D to start/stop timer.

9. displayed on the screen indicates the watch has entered countdown mode. When icon flashes the watch is counting down. When flashing stops the countdown time is expired.

10.Press B to toggle to Time mode.

Alarm Mode

1.Press B until alarm is displayed on screen to enter alarm mode. Up to four alarms may be set.

2.Press D to choose alarm.

3.Press C to turn on/off alarm indicator.

4.Press A to exit alarm setting screen.

5. displayed on the home screen indicates an alarm is turned on.

Alarm Setting

1.Press B to enter Alarm mode. Up to four alarms may be set.

2.Press C to decrease value and D to increase value. Press and hold C or D for fast advance.

3.Press A to exit Alarm mode.

- 8 -

Loading...
+ 17 hidden pages