QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 1
QuickStart
Professional III/GameSaver Turbo
Shown Professional III; GameSaver Turbo operates in the same manner.
Features of Your FoodSaver Appliance
AAccessory Hose Storage (under lid)
Manual Seal Button
Indicator Lights
Seal Control Switch (5-Level)
F On/Off Button |
H Accessory Port |
J Vacuum Channel |
M Roll Storage |
Antibacterial Drip Tray |
Compartment |
|
For important safety information and helpful tips, please refer to the FoodSaver Reference Guide included in your kit. Questions? Visit us at www.foodsaver.com or call 1-800-777-5452 (U.S.) or 1-877-804-5383 (Canada). Get tips on vacuum packaging and order FoodSaver accessories.
Features
QS.Pro3_GSturbo_v3 6/29/04 11:22 AM Page 2
Getting Started
Registering your appliance is quick and easy at www.foodsaver.com.
How to Make a Bag from a FoodSaver Roll
Pull Out Bag Material |
|
Set Seal Control Switch |
Press and Release Manual Seal Button |
||
1. |
Open appliance lid and place roll into Roll |
5. |
When red Indicator Lights stop blinking, bag |
||
|
Storage Compartment (M). |
|
|
|
material is sealed. Lid will open slightly. |
2. |
Pull out enough bag material to hold item to be |
6. |
To cut bag, slide Bag Cutter (I) from one end of |
||
|
vacuum packaged, plus 3 inches. Close lid. |
|
sliding channel to other end. |
||
3. |
Turn Seal Control Switch (D) to |
|
. |
7. |
Open lid, remove bag, and tuck roll back |
3 |
|||||
4. |
Press and release Manual Seal Button (B). Lid will |
|
into Roll Storage Compartment before vacuum |
||
|
be pulled down automatically and red Indicator |
|
packaging. |
||
|
Lights (C) will turn on, indicating bag material is |
Now you are ready to vacuum package with your |
|||
|
being sealed. |
|
|
new bag (see below). |
|
How to Vacuum Package with FoodSaver Bags |
Rolls |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|||||||
Place Bag in Vacuum Channel |
Set Seal Control Switch |
|
|
Press and Release On/Off Button |
|||||||||
1. Place item(s) in bag, allowing at least 3 inches of |
5. To begin vacuum process, press and release |
& |
|||||||||||
|
|
||||||||||||
|
space between bag contents and top of bag. |
|
On/Off Button (F). Motor will start and Indicator |
||||||||||
2. |
Open appliance lid and place open end of bag |
|
Lights (C) will turn on in sequence. |
|
|
||||||||
|
down into Vacuum Channel (J). Make sure roll |
6. When motor and Indicator Lights turn off, vacuum |
|||||||||||
|
material is tucked back into Roll Storage |
|
process is complete. Open lid and remove bag. |
||||||||||
|
Compartment (M) or it could prevent the appli- |
|
Refrigerate or freeze as needed. (See FoodSaver |
||||||||||
|
ance from operating properly. |
|
|
Reference Guide for food safety tips.) |
|
|
|||||||
3. |
Close lid. |
|
Tip: The On/Off Button can also be used to cancel |
||||||||||
4. Set Seal Control Switch (D) to: |
|
||||||||||||
|
vacuum process mid-way and open lid. |
|
|
||||||||||
|
|
|
or |
|
to re-seal non-FoodSaver bags, such as |
|
|
||||||
|
|
1 |
2 |
Note: This appliance features a heavy-duty Sealing |
|||||||||
|
Mylar® potato chip bags (shorter seal time). |
||||||||||||
|
|
|
to vacuum package using FoodSaver bags |
Strip (N) that can perform 50 consecutive seals |
|||||||||
|
|
3 |
|||||||||||
|
|
without overheating. |
Bags |
||||||||||
|
(medium seal time). |
|
|||||||||||
|
|
|
|
|
|
||||||||
|
|
|
or |
|
to vacuum package moist or juicy foods |
|
|
|
|
||||
|
4 |
5 |
|
|
|
|
|||||||
|
such as raw meat (longer seal time). |
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
||
Loading...