The future of installation testing is here
The 1650 Series
Multifunction Testers
1650 Series
Safer, easier installation testing.
Robin and Fluke joined forces in 1999 to become the largest supplier of hand-held test and measurement equipment in Europe. These breakthrough products are the result of a combined experience of over 50 years in instrument design and development.
The 1650 Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and BS 7671 16th Edition IEE Wiring Regulations.
The unique ergonomic design, low weight, and padded neck-strap to free your hands, make operating a 1650 Series multifunction tester a pleasure. With easy-to-operate controls and a large display with exceptionally wide viewing angle, it’s also comfortable and safe to use.
Select from two models |
1652 |
|
|
1652: Performs all basic installation tests including |
|
continuity/insulation/loop impedance, RCD tripping time, |
|
RCD tripping current level and RCD auto-testing |
|
1653: As 1652 but with earth resistance and phase sequence |
|
measurement. Has internal memory and a PC interface for |
1653 |
documentation and reporting |
(see back page for a comparison chart)
1 |
Phase/Earth Voltage warning indicator |
|
|
2 |
On/off button |
|
|
3 |
Press to test button |
8 |
4 |
|
|
1 |
|
4 |
Function buttons to assist easy navigation |
5 |
|
|
|
|
|
5 |
Memory mode button |
6 |
|
|
|
|
6 Scroll memory locations button
3
7 Backlight button
7 2
8 Test lead resistance zero button
Learn in minutes, test in seconds.
Save time on every installation.
•Easy: simply turn the knob, press the button and see the results
•Efficient: measure loop impedance without tripping RCDs, eliminating the need to bypass them
•Rugged: withstands a one-meter drop for demanding field use.
•Safe: slim probe with test button keeps your eyes on the panel while probing hard to reach points
•Comfortable: compact and lightweight (less than 1.2 kg) for all day testing
•Compliant: meets all relevant standards including BS EN 61557
The unique curved shape, ergonomic control layout and padded neck-strap ensure comfort in use.
Performs all electrical installation tests including
1 Voltage and frequency
2 Insulation resistance
3 Continuity
4 Loop impedance (with patented non-trip technology)
3
24
|
5 |
RCD tripping time |
1 |
5 |
|
|
6 |
RCD tripping current |
|
6 |
|
7 |
7 |
Earth resistance (model 1653) |
8 |
|
|
|
8 |
Phase sequence (model 1653) |
Loading...