Power Quality Analyzers
In industry, healthcare, and business
–in fact wherever electrical and electronic equipment is indispensable
–power quality plays a critical role in maintaining continuity. Non-linear loads, switching, load changes and equipment problems can result in poor power quality. Poor power quality is not only costly in terms of wasted energy and unnecessary downtime, it’s also dangerous and increases risk of equipment failure.
Fluke has an unrivalled range of power quality analyzers to help you maintain high-quality power systems. The tools give you the power to analyze every parameter, powerrelated event or anomaly faster, safer and in more detail than ever before.
Analyze your power network quickly
|
|
|
Features |
|
|
|
|
|
435 |
434 |
43B |
Application |
Three-phase |
Single-phase |
|
Inputs |
4 voltage and 4 current |
1 voltage and |
|
|
(for 3 phases and neutral) |
1 current |
|
Measurements |
|
|
|
Vrms, Arms, Hz, W, VAR, VA, PF, Cos ϕ (DPF), |
● |
● |
● |
Crest Factors |
|
|
|
Harmonics and THD (V,A,W), k-factor |
● |
● |
● |
Inter-harmonics |
● |
● |
|
kWh and kVARh, kVAh, demand interval |
● |
● |
- |
Flicker (Plt, Pst, PF5) |
● |
● |
- |
Unbalance |
● |
● |
- |
Mains signaling |
● |
Optional* |
- |
Recorder/AutoTrend |
●/● |
●/● |
●/- |
Logger |
● |
Optional* |
- |
System-Monitor (EN50160 compliance) |
● |
● |
- |
Real time scope/Phasor diagrams |
●/● |
●/● |
●/- |
Dips and swells/Half cycle based |
●/● |
●/● |
●/- |
Transient display |
● |
● |
● |
Inrush current |
● |
● |
● |
IEC61000-4-30, -4-7, -4-15 compliance |
Class A |
Class B |
- |
Built-in general purpose Scope and DMM |
- |
- |
● |
Memory (screens/data) |
50/10 |
50/10 |
20 for screens and |
|
|
|
data |
Memory size |
16MB** |
8 MB** |
|
FlukeView software and interface cable |
● |
● |
Depending on |
|
|
|
configuration |
Power Log Software |
● |
Optional* |
- |
EN61010 safety rating |
600 V CAT IV/1000 V CAT III |
600 V CAT III |
|
Current clamps included |
4 x i430 Flex |
4 x i400S |
i400S |
*Optional functionality can be added with Logger upgrade kit. For details see ordering information.
**Logger uses user-configurable shared memory.
Fluke 43B
A choice of three configurations
|
43Basic |
43B |
43Kit |
i400s Current Clamp |
● |
● |
● |
SW43W FlukeView Software |
|
● |
● |
OC4USB Serial Interface Adapter Cable (USB) |
|
● |
● |
C120 Hard Case |
|
● |
● |
VPS40 Voltage Probe |
|
● |
|
Fluke 61 IR Thermometer |
|
● |
|
VR101S Voltage Event Recorder |
|
|
● |
All configurations are delivered with test leads, probes, clips,
battery pack, banana-to-BNC adapter and line voltage adapter/battery charger.
Check the Fluke web site for Technical Specifications and Application Notes with the Fluke power quality analyzers.
Fluke. Keeping your world up and running.TM
Fluke (UK) Ltd.
52 Hurricane Way Norwich
Norfolk
NR6 6JB United Kingdom
Tel.: (020) 7942 0700
Fax: (020) 7942 0701 E-mail: industrial@uk.fluke.nl
Visit us on the worldwide web at:
www.fluke.co.uk
Fluke Corporation
P.O. Box 9090
Everett, WA USA 98206
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
© Copyright 2006, Fluke Corporation. All rights reserved. Printed in the Netherlands 04/06
Data subject to alteration without notice. Pub_ID: 11097-eng
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446 -5116
In Europe/M-East/Africa +31 (0)40 2 675 200
or Fax +31 (0)40 2 675 222 In Canada (905) 890-7600 or Fax (905) 890-6866
From other countries +1 (425) 446 -5500 or Fax +1 (425) 446 –5116
Visit us on the worldwide web at:
www.fluke.com