Fluke 430 Series Three-Phase Power Quality Analyzers
Pinpoint power problems faster, safer and in greater detail
The Fluke 434 and 433 three-phase power quality analyzers help you locate, predict, prevent and trou bleshoot problems in power distribution systems. These easy-to-use handhelds are a “must have” any person who maintains or troubleshoots three phase distribution. The new IEC standards for flicker and power quality are built right in to take the guess work out of monitoring.
•Records all your necessary values in a three phase system.
•Minimal setup required with intuitive menus.
•Highest safety rating in the industry.
•Four voltage and four current channels.
•Captures waveform data on all phases simultaneously.
•System-Monitor: Six power quality parameters on one dashboard
•Automatic Transient display: Never miss an event
•Auto Trend: Don’t waste time setting up recordings.
•Rugged, handheld recorder.
•Seven hours operating time per charge on NiMH battery pack.
•Transfer data files to your PC for reporting and analysis using FlukeView® software.
CAT IV 600 V and CAT III 1000 V safety rating
Designed to help protect you and your equipment against electrical shock and fire, the Fluke 430 Series analyzers, accessories and charger are all certified to meet the stringent safety standards for use in CAT IV 600 V and CAT III 1000 V environments. They are the first tools of their kind to carry the CAT IV rating and therefore can be used at virtually all power connections and outlets in a low-voltage power distribution system.
Technical Data
Quickly see the trend
Auto Trend feature allows fast insight into changes over time. Every displayed reading is automatically and continuously recorded without having to set thresholds or intervals and without manually starting the process. Quickly view trends for voltage, current, frequency, power, harmonics or flicker on all phases and neutral. Analyze the trends using the cursors and zoom tools — even while background recording continues.
Measures everything
Measure true-rms & peak voltage and current, frequency, dips and swells, transients, interruptions, power and power consumption, peak demand harmonics, inter-harmonics, flicker and unbalance.
AutoTrend automatically records all displayed parameters in the background. Toggle between data and trend view and use cursors and zoom to analyze measurements without interrupting the recording.
Simple menu structure with logical function grouping gives fast access to key measurements.
Track harmonics up to the 50th, and measure and record THD in accordance with IEC61000-4-7 requirements.
Automatic transient display
Every time an event or distortion on voltage is detected, the instrument triggers and automatically stores voltage and current waveforms on all three phases and neutral. The analyzer will also trigger when a certain current value level is exceeded. Up to 40 dips, swells, interruptions and transients can be captured this way. You can see voltage transients as high as 6 kV and as fast as 5 microseconds.
2 Fluke Corporation Fluke 430 Series Three-Phase Power Quality Analyzers
System-Monitor: Multi-parameter power quality health check on one display
A single push of the MONITOR button delivers a single dashboard display of rms voltage, harmonics, flicker, interruptions, rapid voltage changes, swells, unbalance and frequency. The dashboard is updated live, showing compliance of each parameter to EN50160 limits or your own limits. Color-coded bars clearly show which parameters are inside (pass) or outside limits (fail). During a Monitor session, you can easily drill down to more detail of any parameter and view and capture its trend for a report.
‘off line’ on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView® software. The software’s ‘view’ mode allows cursors and zoom tools to be used on stored measurements. Perform custom analysis and create reports, measurement data can also be exported to common spreadsheet programs. Store up to 10 measurement datasets, each dataset can contain up to 32 parameters and up to 50 screens for use in reports.
The System-Monitor overview screen gives instant insight into whether the voltage, harmonics, flicker, frequency and the number of dips and swells fall outside the set limits.
A detailed list is given of all events falling outside the set limits. By scrolling through the event list and selecting an event, the event can be analyzed in detail.
Perform custom analysis and create reports with FlukeView® Power Quality software. Measurement data can also be exported to common spreadsheet programs.
Easy-to-use
Thanks to thoughtful features like user-friendly menus in local languages and setups with minimal steps. The high-resolution color screen updates every 200 mS and displays waveforms and wiring diagrams color coded to industry standards. Handy on-screen wiring diagrams for all commonly used three phase and single phase configurations guide you through connections.
Extensive data analysis possibilities
The Fluke 430 Series provides three ways to analyze measurements. Cursors and zoom tools can be used ‘live’ while taking measurements or
The full color display uses region specific industry-standard colorcoding (user selectable) to correlate measurements with actual wiring.
Fluke 430 Series Three-Phase Power Quality Analyzers Fluke Corporation 3
Loading...