FLIR CAM220IP User guide

Download

Page 1

CAM220IP

INSTALLATION

INSTRUCTIONS

English (EN)

04-2016Date: 87268-1Document number:

Page 2

Page 3

Trademarkandpatentsnotice

Raymarine,Tacktick,ClearPulse,Truzoom,HSB,SeaT alk,SeaT alk

,SeaTalk

,Micronet,Raytech,

GearUp,MarineShield,Seahawk,Autohelm,Automagic,andVisionalityareregisteredorclaimed

trademarksofRaymarineBelgium.

FLIR,DownVision,SideVision,Dragony,Instalert,InfraredEverywhere,andTheWorld’sSixth SenseareregisteredorclaimedtrademarksofFLIRSystems,Inc.

Allothertrademarks,tradenames,orcompanynamesreferencedhereinareusedforidenticationonly andarethepropertyoftheirrespectiveowners.

Thisproductisprotectedbypatents,designpatents,patentspending,ordesignpatentspending.

FairUseStatement

Youmayprintnomorethanthreecopiesofthismanualforyourownuse.Youmaynotmakeanyfurther copiesordistributeorusethemanualinanyotherwayincludingwithoutlimitationexploitingthemanual commerciallyorgivingorsellingcopiestothirdparties.

Softwareupdates

Important:ChecktheRaymarinewebsiteforthelatestsoftwarereleasesforyourproduct.

www.raymarine.com/software

Producthandbooks

ThelatestversionsofallEnglishandtranslatedhandbooksareavailabletodownloadinPDFformatfromthewebsite

www.raymarine.com.

Pleasecheckthewebsitetoensureyouhavethelatesthandbooks.

ENGLISH

Documentnumber:87268-1 Date:04-2016

Page 4

Page 5

Contents

Chapter1Importantinformation........................7

CertiedInstallation...................................................7

PowerOverEthernet(PoE)........................................7

Wateringress............................................................7

Disclaimer.................................................................8

EMCinstallationguidelines........................................8

Suppressionferrites...................................................8

Connectionstootherequipment.................................8

Declarationofconformity............................................8

Productdisposal........................................................8

Warrantyregistration..................................................8

IMOandSOLAS........................................................9

Technicalaccuracy....................................................9

Chapter2Documentandproduct

information...........................................................11

2.1Documentinformation..........................................12

2.2Productoverview.................................................12

Chapter3Planningtheinstallation...................13

3.1Installationchecklist.............................................14

3.2Compatiblemultifunctiondisplays.........................14

3.3Partssupplied......................................................15

3.4T oolsrequired......................................................15

3.5Typicalsystems...................................................16

3.6Warningsandcautions.........................................16

3.7Generallocationrequirements..............................17

3.8Cameraorientation...............................................17

3.9Productdimensions..............................................18

8.4Resettingthecamera...........................................42

Chapter9Technicalsupport..............................43

9.1Raymarineproductsupportandservicing..............44

Chapter10Technicalspecication....................45

10.1T echnicalspecication........................................46

Chapter11Sparesandaccessories..................47

11.1Networkhardware..............................................48

11.2RayNettoRJ45adaptercables...........................49

11.3Networkcableconnectortypes............................50

11.4RayNettoRayNetcablesandconnectors...........51

Chapter4Cablesandconnections....................19

4.1Generalcablingguidance.....................................20

4.2Connectionsoverview..........................................21

4.3Poweroptions......................................................21

4.4Powerconnection................................................22

4.5Networkconnection..............................................24

Chapter5Mounting.............................................27

5.1Mountingtheunit.................................................28

Chapter6Operation............................................31

6.1Operationinstructions...........................................32

6.2Webbrowserinterface..........................................32

6.3Reversevideoandvideoip.................................35

6.4Resettingthecameratofactorydefaults................35

Chapter7Maintenance.......................................37

7.1Routinechecks....................................................38

7.2Unitcleaninginstructions......................................38

Chapter8Systemchecksand

troubleshooting...................................................39

8.1Troubleshooting...................................................40

8.2LEDstatus...........................................................40

8.3IPcameratroubleshooting....................................41

Page 6

6CAM220IP

Page 7

Chapter1:Importantinformation

Warning:Ensureallequipmenthas isolatedpowersupply

CertiedInstallation

Raymarinerecommendscertiedinstallationbya Raymarineapprovedinstaller.Acertiedinstallation qualiesforenhancedproductwarrantybenets. ContactyourRaymarinedealerforfurtherdetails, andrefertotheseparatewarrantydocumentpacked withyourproduct.

Warning:Productinstallationand operation

•Thisproductmustbeinstalledand operatedinaccordancewiththe instructionsprovided.Failuretodoso couldresultinpersonalinjury,damage toyourvesseland/orpoorproduct performance.

•Raymarinerecommendscertied installationbyaRaymarineapproved installer.Acertiedinstallationqualies forenhancedproductwarrantybenets. ContactyourRaymarinedealerfor furtherdetails,andrefertotheseparate warrantydocumentpackedwithyour product.

Warning:PoweringPoEdevices

Thisdevicecanbepoweredoverits ethernetconnection(PoE)ORviaits dedicatedpowercable.

NEVERconnectthedevicesdedicated powercablewhenthedeviceisbeing suppliedPoE.

Warning:Positivegroundsystems

Donotconnectthisunittoasystemwhich haspositivegrounding.

Warning:Powersupplyvoltage

Thisproductfeaturesanisolatedpower supply.Topreventpotentialdamageto equipment,Raymarinerecommendsthat anyexternalequipmentconnectedtothis productalsofeaturesanisolatedpower supply.

PowerOverEthernet(PoE)

PoEisasystemwhichallowselectricalpowertobe passedfromaPSE(PowerSourcingEquipment) devicealongtheethernetconnectiontosupplypower toaPD(PoweredDevice).Thisallowsasingle cabletobeusedtoprovidebothdataconnection andelectricalpowertocompatibledevices.

PoEClassications

PSEdevicesdetecttheindicatedpowerrange/ classicationofconnectedPDsandallocatethe necessarymaximumpowerbasedonthePDs classication

ThePoEclassicationsareasfollows:

Current

PoEClass

Class0

Class1

Class2

Class3

Class4

ThePSEwillalwaysallocatethemaximumpower basedontheclassicationofthePD.

(mA)

0to40.44Wto

9to120.44Wto

17to203.84Wto

26to306.49Wto

36to4412.95Wto

Powerrange (Watt)

12.94W

3.84W

6.49W

12.95W

25.5W

Class description

Verylow power

Lowpower

Midpower

Highpower

Connectingthisproducttoavoltage supplygreaterthanthespecied maximumratingmaycausepermanent damagetotheunit.RefertotheTechnical specicationsectionforvoltagerating.

Caution:Serviceandmaintenance

Thisproductcontainsnouserserviceable components.Pleasereferallmaintenance andrepairtoauthorizedRaymarine dealers.Unauthorizedrepairmayaffect yourwarranty.

Warning:Switchoffpowersupply

Ensurethevessel’spowersupplyis switchedOFFbeforestartingtoinstallthis product.DoNOTconnectordisconnect equipmentwiththepowerswitchedon, unlessinstructedinthisdocument.

Caution:Powersupplyprotection

Wheninstallingthisproductensurethe powersourceisadequatelyprotected bymeansofasuitably-ratedfuseor automaticcircuitbreaker.

Importantinformation

Wateringress

Wateringressdisclaimer

Althoughthewaterproofratingcapacityofthis productmeetsthestatedIPXstandard(refertothe product’sTechnicalSpecication),waterintrusion andsubsequentequipmentfailuremayoccurifthe productissubjectedtocommercialhigh-pressure washing.Raymarinewillnotwarrantproducts subjectedtohigh-pressurewashing.

Page 8

Disclaimer

Raymarinedoesnotwarrantthatthisproductis error-freeorthatitiscompatiblewithproducts manufacturedbyanypersonorentityotherthan Raymarine.

Raymarineisnotresponsiblefordamagesorinjuries causedbyyouruseorinabilitytousetheproduct, bytheinteractionoftheproductwithproducts manufacturedbyothers,orbyerrorsininformation utilizedbytheproductsuppliedbythirdparties.

EMCinstallationguidelines

Raymarineequipmentandaccessoriesconformto theappropriateElectromagneticCompatibility(EMC) regulations,tominimizeelectromagneticinterference betweenequipmentandminimizetheeffectsuch interferencecouldhaveontheperformanceofyour system

CorrectinstallationisrequiredtoensurethatEMC performanceisnotcompromised.

Note:InareasofextremeEMCinterference, someslightinterferencemaybenoticedonthe product.Wherethisoccurstheproductandthe sourceoftheinterferenceshouldbeseparatedby agreaterdistance.

correctEMCperformance.Ifferritesaresupplied separatelytothecables(i.e.notpre-tted),you musttthesuppliedferrites,usingthesupplied instructions.

•Ifaferritehastoberemovedforanypurpose(e.g. installationormaintenance),itmustbereplacedin theoriginalpositionbeforetheproductisused.

•Useonlyferritesofthecorrecttype,suppliedby Raymarineoritsauthorizeddealers.

•Whereaninstallationrequiresmultipleferritesto beaddedtoacable,additionalcableclipsshould beusedtopreventstressontheconnectorsdue totheextraweightofthecable.

•Ifyourcamerainstallationrequireslongcable runs,youmayneedtotadditionalferritesto maintainacceptableEMCperformance.

Connectionstootherequipment

Requirementforferritesonnon-Raymarinecables

IfyourRaymarineequipmentistobeconnected tootherequipmentusingacablenotsuppliedby Raymarine,asuppressionferriteMUSTalwaysbe attachedtothecableneartheRaymarineunit.

ForoptimumEMCperformancewerecommend thatwhereverpossible:

•Raymarineequipmentandcablesconnectedto itare:

–Atleast1m(3ft)fromanyequipment

transmittingorcablescarryingradiosignalse.g. VHFradios,cablesandantennas.Inthecase ofSSBradios,thedistanceshouldbeincreased to7ft(2m).

–Morethan2m(7ft)fromthepathofaradar

beam.Aradarbeamcannormallybeassumed tospread20degreesaboveandbelowthe radiatingelement.

•Theproductissuppliedfromaseparatebattery fromthatusedforenginestart.Thisisimportantto preventerraticbehavioranddatalosswhichcan occuriftheenginestartdoesnothaveaseparate battery.

•Raymarinespeciedcablesareused.

•Cablesarenotcutorextended,unlessdoingsois detailedintheinstallationmanual.

Note:Whereconstraintsontheinstallation preventanyoftheaboverecommendations,

alwaysensurethemaximumpossibleseparation betweendifferentitemsofelectricalequipment,to providethebestconditionsforEMCperformance throughouttheinstallation

Declarationofconformity

RaymarineUKLtd.declaresthatthisproductis compliantwiththeessentialrequirementsofEMC directive2004/108/EC.

TheoriginalDeclarationofConformitycerticate maybeviewedontherelevantproductpageat

www.raymarine.com.

Productdisposal

Disposeofthisproductinaccordancewiththe WEEEDirective.

TheWasteElectricalandElectronicEquipment (WEEE)Directiverequirestherecyclingofwaste electricalandelectronicequipment.

Warrantyregistration

ToregisteryourRaymarineproductownership, pleasevisitwww.raymarine.comandregisteronline.

Itisimportantthatyouregisteryourproductto receivefullwarrantybenets.Yourunitpackage includesabarcodelabelindicatingtheserialnumber oftheunit.Y ouwillneedthisserialnumberwhen registeringyourproductonline.Youshouldretain thelabelforfuturereference.

Suppressionferrites

•Raymarinecablesmaybepre-ttedorsupplied withsuppressionferrites.Theseareimportantfor

8CAM220IP

Page 9

IMOandSOLAS

Theequipmentdescribedwithinthisdocument isintendedforuseonleisuremarineboatsand workboatsNOTcoveredbyInternationalMaritime Organization(IMO)andSafetyofLifeatSea (SOLAS)CarriageRegulations.

Technicalaccuracy

Tothebestofourknowledge,theinformationinthis documentwascorrectatthetimeitwasproduced. However,Raymarinecannotacceptliabilityforany inaccuraciesoromissionsitmaycontain.Inaddition, ourpolicyofcontinuousproductimprovementmay changespecicationswithoutnotice.Asaresult, Raymarinecannotacceptliabilityforanydifferences betweentheproductandthisdocument.Please checktheRaymarinewebsite(www.raymarine.com) toensureyouhavethemostup-to-dateversion(s)of thedocumentationforyourproduct.

Importantinformation

Page 10

10CAM220IP

Page 11

Chapter2:Documentandproductinformation

Chaptercontents

•2.1Documentinformationonpage12

•2.2Productoverviewonpage12

Documentandproductinformation

Page 12

2.1Documentinformation

D12979-1

2.2Productoverview

Thisdocumentcontainsimportantinformation relatedtotheinstallationofyourRaymarineproduct.

Thedocumentincludesinformationtohelpyou:

•planyourinstallationandensureyouhaveallthe necessaryequipment;

•installandconnectyourproductaspartofawider systemofconnectedmarineelectronics;

•troubleshootproblemsandobtaintechnical supportifrequired.

ThisandotherRaymarineproductdocuments areavailabletodownloadinPDFformatfrom

www.raymarine.com.

Applicableproducts

Thisdocumentisapplicabletothefollowingproducts:

PartnumberNameDescription

E70347

CAM220IP

EyeballIP camera

CAM220IP

TheCAM220IPisanInfraredilluminated(I2)eyeball IPcamerawithbothdayandnightvision.In conjunctionwithacompatiblemultifunctiondisplay (MFD),thecameraprovidesahigh-denitionimage whichcanbeviewedorrecordedforlaterplayback.

Thecamerahasthefollowingfeatures:

•2megapixel1/2.8"SONYprogressivescan CMOSimagesensorforexcellentimagequality (Exmor)

•3.6mmwide-anglemegapixelboardlens

Documentillustrations

Yourproductmaydifferslightlyfromthatshown intheillustrationsinthisdocument,dependingon productvariantanddateofmanufacture.

Allimagesareprovidedforillustrationpurposesonly.

Productdocumentation

Thefollowingdocumentationisapplicabletoyour product:

DescriptionPartnumber

CAM220IPEyeballCameraInstallation instructions

InstallationofaCAM220IPandconnectionto awidersystemofmarineelectronics.

CAM220IPsurfacemountingtemplate

MountingdiagramformountingaCAM220IP .

LighthouseMFDOperationInstructions

DetailstheoperationoftheCamera applicationforaSeries,cSeries,eSeries, andeSSeriesmultifunctiondisplays.

gSSeriesInstallationandoperation instructions

IncludesdetailsforoperationoftheCamera applicationonagSSeriesMFD.

87268

87269

81360

81344

•20mI2beamdistance

•FieldofView(Horizontal=51.0°/Vertical=93.0° ±3°)

•Multi-streamingofH.264andMJPEG

•FullHD(supportsimageresolutionsupto1920x 1080(1080p),at30fps)

•12Vdcpower

•Class2PoEdevice(IEEE802.3af)

ThecameracanalsobeconnectedtoaPCwhich enablesuseofthebuilt-inwebinterfacetoaccess additionalfeatures.Theseadditionalfeaturescan onlybesetorusedviaaconnectedPC.

Approximaterecordtimes

TheapproximaterecordtimesaredependantonIP cameraresolutionandsettings,lightingconditions andavailablestoragespace.

ARaymarine

CAM220IP,settofactorydefault

settingscanrecordatanapproximaterateof22.5 MBperminute;allowingupto44minutesofrecord timeper1GBofavailablestoragespace.

Operationinstructions

Fordetailedoperationinstructionsforyourproduct, refertothedocumentationthataccompaniesyour display.

CAM220IP

Page 13

Chapter3:Planningtheinstallation

Chaptercontents

•3.1Installationchecklistonpage14

•3.2Compatiblemultifunctiondisplaysonpage14

•3.3Partssuppliedonpage15

•3.4T oolsrequiredonpage15

•3.5Typicalsystemsonpage16

•3.6Warningsandcautionsonpage16

•3.7Generallocationrequirementsonpage17

•3.8Cameraorientationonpage17

•3.9Productdimensionsonpage18

Planningtheinstallation

Page 14

3.1Installationchecklist

3.2Compatiblemultifunctiondisplays

Installationincludesthefollowingactivities:

InstallationTask

1Planyoursystem.

Obtainallrequiredequipmentandtools.

Siteallequipment.

4Routeallcables.

Drillcableandmountingholes.

6Makeallconnectionsintoequipment.

Secureallequipmentinplace.

8Poweronandtestthesystem.

Schematicdiagram

Aschematicdiagramisanessentialpartofplanning anyinstallation.Itisalsousefulforanyfuture additionsormaintenanceofthesystem.The diagramshouldinclude:

•Locationofallcomponents.

•Connectors,cabletypes,routesandlengths.

Thisproductiscompatiblewiththefollowing LightHousepoweredRaymarinemultifunction displays.

•aSeries,cSeries,eSeries,eSSeries.

•gSSeries.

Multifunctiondisplaysoftwarerequirements

Theoperationofthisproductrequiresthatyour

Raymarine version12.xxorlater.

Note:ThelatestMFDsoftwarecanbeobtained

byvisitingwww.raymarine.com/software.

MFDisrunningLightHouseIIsoftware

CAM220IP

Page 15

3.3Partssupplied

3.4Toolsrequired

CAM220IP

Thefollowingitemsaresuppliedwithyourproduct.

ItemDescriptionQuantity

IPcamera(Includesa1 m(39.4in)ethernetand powerpigtailcable)

Documentationand softwarepack

Mountingscrews4

Nylonwashers4

Productinstallationrequiresthefollowingtools:

ItemDescription

Powerdrill

Drillbitofappropriatesize*

Pozidrivescrewdriver

Hexwrench(Allenkey)

WaterproofRJ45coupler

Note:Toconnectthecameratoacompatible MFD,aRayNettoSeaTalk

(male)adaptorcable isalsorequired.Fordetailsonavailablenetwork hardwareandcablesrefertoChapter11Spares

andaccessories

Note:*Theappropriatedrillbitsizeisdependent onthethicknessandmaterialofthemounting surface.

Planningtheinstallation

Page 16

3.5T ypicalsystems

3.6Warningsandcautions

Note:Forinformationonhowtoconnectthe

product,refertotheChapter4Cablesand

connectionssection.Forinformationonavailable

cablesandaccessories,refertotheChapter11

Sparesandaccessoriessection.

•Basicmultifunctiondisplay(MFD)system:

Youcanconnecttheproductdirectlytoa multifunctiondisplayusingthesuppliedRJ45 coupler,andanadditionaladaptorcable(referto the4.5Networkconnectionsectionfordetails).If youareconnectingtheproducttoana,c,e,or eSSeriesMFD,thecamerarequiresaseparate powersource,eitherconnectingdirectlytoyour vessel’s12Vdcpowersupply,orusingaPower overEthernet(PoE)injector(refertothe4.4

Powerconnectionsectionfordetails).Ifyouare

connectingtheproducttoagSSeriesMFD, thecameracanbesuppliedPoEbythedisplay , providedthedisplayhasthenecessaryremaining PoEallocation.RefertothegSSeriesinstallation andoperationinstructionsfordetailsonPoE allocation,andalsotothe4.4Powerconnection section.

Important:Beforeproceeding,ensurethatyou havereadandunderstoodthewarningsand cautionsprovidedintheChapter1Important

informationsectionofthisdocument.

•Multiplecamerasystem:

YoucanuseaRaymarinenetworkswitchto connectmultiplecamerastoasingleMFD.Each camerarequiresaseparatepowersupply,unless theswitchiscapableofprovidingPoE,orifthe cameraisconnecteddirectlytoagSSeries MFDsupplyingPoE.Refertothe4.5Network

connectionand4.4Powerconnectionsections

fordetails.

•PC/laptopsystem:

YoucanconnecttheproducttoaPCorlaptop computer,directlyviathecomputer’sEthernet connector,orindirectlyviaaRaymarinenetwork switch.Refertothe4.5Networkconnection sectionfordetails.WhenconnectedtoaPCor laptopcomputer,youcanaccesstheproduct’s built-inwebinterface.

16CAM220IP

Page 17

3.7Generallocationrequirements

3.8Cameraorientation

Importantconsiderationswhenchoosingasuitable locationforyourproduct.

Thisproductissuitableformountingbelowdecks.

Theproductshouldbemountedwhereitwillbe:

•protectedfromphysicaldamageandexcessive vibration.

•wellventilatedandawayfromheatsources.

Whenchoosingalocationfortheproduct, considerthefollowingpointstoensurereliableand trouble-freeoperation:

•Access—theremustbesufcientspaceto enablecableconnectionstotheproduct,avoiding tightbendsinthecable.

•Diagnostics—theproductmustbemountedin alocationwherethediagnosticsLEDiseasily visible.

Note:Notallproductsincludeadiagnostics LED.RefertotheChapter8Systemchecks

andtroubleshootingformoreinformation.

•Electricalinterference—theproductshouldbe mountedfarenoughawayfromanyequipment thatmaycauseinterferencesuchasmotors, generatorsandradiotransmitters/receivers.

Thecameracanbemountedin2orientations referredtoas“Ballup”and“Balldown”.

Thedefaultimageorientationisfortheball-down conguration,ifthecameraistobemountedinthe ball-upcongurationthenthevideoimagemustbe ipped.

Ball-up:Thecamerais mountedontopofthe mountingsurface.

Ball-down:Thecamerais suspendedupsidedown, belowthemountingsurface.

Theimageorientationmustbechangedusingthe built-inwebinterfaceaccessiblewhenconnected toaPC.

•Magneticcompass—refertotheCompass safedistancesectioninthisdocumentforadvice onmaintainingasuitabledistancebetweenthis productandanycompassesonyourvessel.

•Power—tokeepcablerunstoaminimum,the productmustbelocatedascloseaspossibleto thevessel’sdcpowersupply.

•Mountingsurface—ensuretheproductis adequatelysupportedonasecuresurface.Refer totheweightinformationprovidedintheT echnical specicationforthisproductandensurethatthe intendedmountingsurfaceissuitableforbearing theproductweight.DoNOTmountunitsorcut holesinplaceswhichmaydamagethestructure ofthevessel.

Compasssafedistance

Topreventpotentialinterferencewiththevessel's magneticcompasses,ensureanadequatedistance ismaintainedfromtheproduct.

Whenchoosingasuitablelocationfortheproduct youshouldaimtomaintainthemaximumpossible distancefromanycompasses.Typicallythisdistance shouldbeatleast1m(3ft)inalldirections.However forsomesmallervesselsitmaynotbepossibleto locatetheproductthisfarawayfromacompass.In thissituation,whenchoosingtheinstallationlocation foryourproduct,ensurethatthecompassisnot affectedbytheproductwhenitisinapoweredstate.

Planningtheinstallation

Page 18

3.9Productdimensions

80.7 mm (3.18 in)

99.2 mm (3.91 in)

D12985-1

CAM220IP

18CAM220IP

Page 19

Chapter4:Cablesandconnections

Chaptercontents

•4.1Generalcablingguidanceonpage20

•4.2Connectionsoverviewonpage21

•4.3Poweroptionsonpage21

•4.4Powerconnectiononpage22

•4.5Networkconnectiononpage24

Cablesandconnections19

Page 20

4.1Generalcablingguidance

100 mm (4 in)

200 mm (8 in)

Cabletypesandlength

Itisimportanttousecablesoftheappropriatetype andlength

•Unlessotherwisestateduseonlystandardcables ofthecorrecttype,suppliedbyRaymarine.

•Ensurethatanynon-Raymarinecablesareofthe correctqualityandgauge.Forexample,longer powercablerunsmayrequirelargerwiregauges tominimizevoltagedropalongtherun.

Routingcables

Cablesmustberoutedcorrectly,tomaximize performanceandprolongcablelife.

•DoNOTbendcablesexcessively.Wherever possible,ensureaminimumbenddiameterof200 mm(8in)/minimumbendradiusof100mm(4in).

•AlwaysuseanRS232/NMEAconverterwith opticalisolationonthesignallines.

•AlwaysmakesurethatPC’sorothersensitive electronicdeviceshaveadedicatedpowercircuit.

Cableshielding

Ensurethatalldatacablesareproperlyshielded thatthecableshieldingisintact(e.g.hasn’tbeen scrapedoffbybeingsqueezedthroughatightarea).

•Protectallcablesfromphysicaldamageand exposuretoheat.Usetrunkingorconduitwhere possible.DoNOTruncablesthroughbilgesor doorways,orclosetomovingorhotobjects.

•Securecablesinplaceusingtie-wrapsorlacing twine.Coilanyextracableandtieitoutoftheway.

•Whereacablepassesthroughanexposed bulkheadordeckhead,useasuitablewatertight feed-through.

•DoNOTruncablesneartoenginesoruorescent lights.

Alwaysroutedatacablesasfarawayaspossible from:

•otherequipmentandcables,

•highcurrentcarryingacanddcpowerlines,

•antennae.

Strainrelief

Ensureadequatestrainreliefisprovided.Protect connectorsfromstrainandensuretheywillnotpull outunderextremeseaconditions.

Circuitisolation

Appropriatecircuitisolationisrequiredfor installationsusingbothACandDCcurrent:

•Alwaysuseisolatingtransformersoraseparate power-invertertorunPC’s,processors,displays andothersensitiveelectronicinstrumentsor devices.

•AlwaysuseanisolatingtransformerwithWeather FAXaudiocables.

•Alwaysuseanisolatedpowersupplywhenusing a3rdpartyaudioamplier.

20CAM220IP

Page 21

4.2Connectionsoverview

4.3Poweroptions

Usethefollowinginformationtohelpyouidentifythe connectionsonyourproduct.

Suitable

ConnectorTypeConnectsto:

RJ45•RayNet

network

•Multifunctiondisplay

•PC

cables

ANetwork couplerand /orRayNet toSeaTalk adaptorcable isrequired. Referto

Chapter11 Sparesand accessories.

Power12Vdcpower

supply

Note:The terminator shouldbe

18AWG minimum thicknessfor powercable extensions.

removed toenable connection toapower supply.

Makingconnections

ThisproductmustbepoweredusingONEofthe followingmethods:

1.PoE(PoweroverEthernet).

Either:

•DirectconnectiontoaRaymarinegSSeries MFD(onlyonecableisrequiredtocarryboth

dataandpowersignals),or

•Connectiontoasuitably-poweredRaymarine orFLIRPoEinjector.Onlyonecableis requiredtocarrybothdataandpowersignals betweenthecameraandthePoEinjector. However,thePoEitselfwillrequireitsown powersource,andaseparateethernet datacabletoalaptop,RaymarineMFD,or Raymarinenetworkswitch.

Thismethodisusefulifthecameraislocateda longdistancefromapowersource;youwillonly needasingleethernetdatacabletothecamera itself,andthePoEinjectorcanbelocatedclose tothepowersource.

2.Self-powered.

Directconnectiontoavessel'spowersupply usingthesuppliedpowercable.Withthis method,aseparateethernetdatacableis requiredtoalaptop,RaymarineMFD,or Raymarinenetworkswitch.

Followthestepsbelowtoconnectthecable(s)to yourproduct.

1.Ensurethatthevessel'spowersupplyisswitched off.

2.Ensurethatthedevicebeingconnectedhas beeninstalledinaccordancewiththeinstallation instructionssuppliedwiththatdevice.

3.Ensuringcorrectorientation,pushcable connectorsfullyontothecorresponding connectors.

4.Ifapplicable,engageanylockingmechanismto ensureasecureconnection.

5.Ensureanybareendedwireconnectionsare suitablyinsulatedtopreventcorrosiondueto wateringress.

RefertothePowerconnectionsectionforconnection details.

Warning:PoweringPoEdevices

Thisdevicecanbepoweredoverits ethernetconnection(PoE)ORviaits dedicatedpowercable.

NEVERconnectthedevicesdedicated powercablewhenthedeviceisbeing suppliedPoE.

Cablesandconnections

Page 22

4.4Powerconnection

12 v dc +

12 v dc -

D12986-1

D13508-1

3 4 5

12 v dc

D13509-1

3 4

Self-powered

Theunitcanbepoweredfroma12voltdcpower supplyusingitsdedicatedpowercable.

Note:Thepowercableissuppliedwitha terminatortted,thismustberemovedifthedevice istobeself-powered.

1MFD

2IPcamera

ItemDescriptionConnectsto:

1Vessel’s12Vdcpower

Product’spowercable

supply

2PositiveterminalPowersupply—

positiveterminal

3Product’spowercableVessel’s12Vdcpower

supply

4NegativeterminalPowersupply—

negativeterminal

PoweroverEthernet

ThecameraisaClass2PoEdevice.When thecameraisconnecteddirectlytoagSSeries multifunctiondisplay(MFD)theunitcanbepowered fromthedisplaysnetworkconnection.

NEVERconnectthecamera’spowersupply connectionwhentheunitisbeingsuppliedPoE.

PoEinjector(R32141)(notsupplied)

Camera’sethernetconnection

RayNettoSeaT alk

adaptorcable(notsupplied)

Camera’spowercable(Connectionnotrequired ascameraisbeingsuppliedPoEbytheinjector.)

Important:Allconnectionsshouldbemadein adryareaandbesuitablyinsulatedtoprevent corrosionandpossibleproductdamagedueto wateringress.

PowerOverEthernet(PoE)

PoEClassications

PSEdevicesdetecttheindicatedpowerrange/ classicationofconnectedPDsandallocatethe necessarymaximumpowerbasedonthePDs classication

ThePoEclassicationsareasfollows:

MFD(providingPoEtothecamera)

2IPcamera

WaterproofRJ45ethernetcoupler(R32142) (supplied)

Camera’sethernetconnection

Camera’spowercable(Connectionnotrequired ascameraisbeingsuppliedPoEbytheMFD.)

PoEinjector

ThecameracanalsobepoweredusingaPoE injector.

RayNettoSeaT alk

adaptorcable(notsupplied)

PoEClass

Class0

Current (mA)

0to40.44Wto

Powerrange (Watt)

12.94W

Class1

9to120.44Wto

3.84W

Class2

17to203.84Wto

6.49W

Class3

26to306.49Wto

12.95W

Class4

36to4412.95Wto

25.5W

ThePSEwillalwaysallocatethemaximumpower basedontheclassicationofthePD.

Powercableextension

Theproductissuppliedwithapowercable,which canbeextendedifrequired.

•Thepowercableforeachunitinyoursystem shouldberunasaseparate,singlelengthof

Class description

Verylow power

Lowpower

Midpower

Highpower

CAM220IP

Page 23

2-wirecablefromtheunittothevessel'sbatteryor

D13344-1

D13348-1

distributionpanel.

•Raymarinerecommendsaminimumwiregauge

of18AWG(0.82mm

)foranylengthofcable

extension.

•Foralllengthsofextensiontothepowercable,

ensurethereisacontinuousminimumvoltage attheproduct’spowerconnectorof10.8Vwitha fullyatbatteryat11V.

Important:Beawarethatsomeproductsin yoursystem(suchassonarmodules)cancreate voltagepeaksatcertaintimes,whichmayimpact thevoltageavailabletootherproductsduringthe peaks.

Powerdistribution

Recommendationsandbestpractice.

•Theproductissuppliedwithapowercable.Only usethepowercablesuppliedwiththeproduct.Do NOTuseapowercabledesignedfor,orsupplied with,adifferentproduct.

•RefertothePowerconnectionsectionformore informationonhowtoidentifythewiresinyour product’spowercable,andwheretoconnectthem.

BatteryconnectionscenarioA:suitableforavesselwith acommonRFgroundpoint.Inthisscenario,ifyour product’spowercableissuppliedwithaseparatedrain wirethenitshouldbeconnectedtothevessel’scommon groundpoint.

BatteryconnectionscenarioB:suitableforavessel withoutacommongroundingpoint.Inthiscase,ifyour product’spowercableissuppliedwithaseparatedrain wirethenitshouldbeconnecteddirectlytothebattery’s negativeterminal.

•Seebelowformoreinformationonimplementation forsomecommonpowerdistributionscenarios.

Implementation—connectiontodistribution panel

Important:Whenplanningandwiring,takeinto

considerationotherproductsinyoursystem,some ofwhich(e.g.sonarmodules)mayplacelarge powerdemandpeaksonthevessel’selectrical system.

Note:Theinformationprovidedbelowisfor guidanceonly ,tohelpprotectyourproduct.It coverscommonvesselpowerarrangements,but doesNOTcovereveryscenario.Ifyouareunsure howtoprovidethecorrectlevelofprotection, pleaseconsultanauthorizedRaymarinedealeror asuitablyqualiedprofessionalmarineelectrician.

•Alternatively,thesuppliedpowercablemaybe connectedtoasuitablebreakerorswitchonthe vessel'sdistributionpanelorfactory-ttedpower distributionpoint.

•Thedistributionpointshouldbefedfromthe vessel’sprimarypowersourceby8AWG

Implementation—directconnectiontobattery

•Thepowercablesuppliedwithyourproductmay beconnecteddirectlytothevessel'sbattery,viaa suitablyratedfuseorbreaker.

•Thepowercablesuppliedwithyourproductmay NOTincludeaseparatedrainwire.Ifthisisthe case,onlythepowercable’sredandblackwires needtobeconnected.

•IfthesuppliedpowercableisNOTttedwithan inlinefuse,youMUSTtasuitablyratedfuseor breakerbetweentheredwireandthebattery’s positiveterminal.

•Refertotheinlinefuseratingsprovidedinthe product’sdocumentation.

•Ifyouneedtoextendthelengthofthepowercable suppliedwithyourproduct,ensureyouobserve thededicatedPowercableextensionsadvice

(8.36mm

•Ideally,allequipmentshouldbewiredtoindividual suitably-ratedthermalbreakersorfuses,with appropriatecircuitprotection.Wherethisisnot possibleandmorethan1itemofequipment sharesabreaker,useindividualin-linefuses foreachpowercircuittoprovidethenecessary protection.

•Inallcases,observetherecommended breaker/fuseratingsprovidedintheproduct’s documentation.

•Ifyouneedtoextendthelengthofthepowercable suppliedwithyourproduct,ensureyouobserve thededicatedPowercableextensionsadvice providedintheproduct’sdocumentation.

Important:Beawarethatthesuitablefuserating forthethermalbreakerorfuseisdependentonthe numberofdevicesyouareconnecting.

)cable.

providedintheproduct’sdocumentation.

Cablesandconnections23

Page 24

Grounding

D13510-1

3 4 5

12 v dc +

12 v dc -

D13511-1

3 4 5

12 v dc +

12 v dc -

4.5Networkconnection

Ensurethatyouobservetheseparategrounding adviceprovidedintheproduct’sdocumentation.

Moreinformation

Raymarinerecommendsthatbestpracticeis observedinallvesselelectricalinstallations,as detailedinthefollowingstandards:

•BMEACodeofPracticeforElectricaland ElectronicInstallationsinBoats

•NMEA0400InstallationStandard

•ABYCE-11AC&DCElectricalSystemsonBoats

•ABYCA-31BatterychargersandInverters

•ABYCTE-4LightningProtection

In-linefuseandthermalbreakerratings

Thefollowingin-linefuseandthermalbreakerratings applytoyourproduct:

In-linefuseratingThermalbreakerrating

2Aslowblow

3A(ifonlyconnectingone device)

Note:

•Thesuitablefuseratingforthethermalbreaker isdependentonthenumberofdevicesyouare connecting.Ifindoubtconsultanauthorized Raymarinedealer.

•Yourproduct’spowercablemayhaveatted in-linefuse,ifnotthenyoucanaddanin-line fusetothepositivewireofyourproduct’spower connection.

Warning:Groundingnotrequired

Thisproductisfullyinsulatedanddoes NOTrequireseparategrounding.

TheunitmustbeconnectedtoacompatibleMFDor PCtoenablethevideofeedtobeviewed.

PCconnection

WhenconnectingthecameradirectlytoaPC thecamerarequiresaseparatepowersupply connection.AlternativelyaPoEinjectorcouldbe usedtopowerthecamera.

ItemDescription

2IPcamera

(Optional)RJ45ethernetcable

(Optional)WaterproofRJ45ethernet coupler(R32142)(supplied)

Camera’sethernetcable

Camera’spowercable

Note:Youcanalsoconnectthecamera’sethernet cabledirectlytothePC’sethernetport,omitting theadditionalRJ45ethernetcableandethernet coupler.

Fordetailsonavailablenetworkhardwareand cablesrefertoChapter11Sparesandaccessories.

Multifunctiondisplayconnection

Theunitcanconnectdirectlytoamultifunction display.IfthemultifunctiondisplayprovidesPower overEthernet(PoE)thenaseparatepowersupply maynotberequired.

ItemDescription

1MFDrearconnectorpanel

2IPcamera

RayNettoSeaTalk

(male)adaptorcable

CAM220IP

Page 25

ItemDescription

D13512-1

4 5

12 v dc +

12 v dc -

D13175-1

WaterproofRJ45ethernetcoupler(R32142) (supplied)

Camera’sethernetcable

Camera’spowercable(Connectionnotrequired ifthecameraisbeingsuppliedPoEbytheMFD.)

Note:Theconnectionpanelonyourproductmay lookslightlydifferenttothatshown,depending onvariant.Thenetworkconnectionmethod remainsthesameforallproductsfeaturingRayNet connectors.

Fordetailsonavailablenetworkhardwareand cablesrefertoChapter11Sparesandaccessories.

Networkswitchconnection

Multiplecamerascanbenetworkedtogetherusing annetworkswitchorrouter.

ItemDescription

1Raymarinenetworkswitch

2IPcamera

RayNettoSeaT alk

WaterproofRJ45ethernetcoupler(R32142)

adaptorcable(notsupplied)

(supplied)

Camera’sethernetcable

Camera’spowercable

RJ45adaptorcablesleeve

ThesleevesurroundingtheRJ45connectoronthe RJ45toRayNetadaptorcablescanbepulledback awayfromtheconnectortoallowforconnectionto anethernetcoupler.

Cablesandconnections25

Page 26

26CAM220IP

Page 27

Chapter5:Mounting

Chaptercontents

•5.1Mountingtheunitonpage28

Mounting

Page 28

5.1Mountingtheunit

D13522-1

D13523-1

D13524-1

Havingchosenasuitablelocation,installtheunit asfollows:

Ensurethepowersupplyisswitchedoffandthatthe necessarycableshavebeenfedtothemounting location.

Note:Thecameraissuppliedpartlyassembled. Theexternalplasticcollar(packedseparatelyin thebox)protectsthecameraballwhenthecamera isinuse.Youmustattachthecollartothecamera baseaftermountingthecamera.

1.Removeallcomponentsfromthebox.

Ensurethatyouretaintheexternalplasticcollar, asyoumustattachthistothecamerabaseatthe endofthisprocedure.

2.Checktheselectedlocationfortheunit.Aclear, atareaisrequired,whichissafetohavescrews ttedto.

3.Usethesuppliedmountingtemplatetomarkout thelocationofthemountingholes,andifrequired thecablefeedhole.

4.Drillthemountingholes,andifrequiredthecable feedholeatthemarkedlocations.

5.Loosenthescrewinthesideofthecamera’s baseusingthesuppliedhexwrench(Allenkey).

counter-clockwise,thenpullthebaseawayfrom thecamerabody.

7.Feedthecamera’scablesthroughtheholeinthe camera’sbase,orthroughoneoftheprovided cablechannels.

8.Placethecamera’sbaseintoposition,liningup theholesinthebasewiththedrilledholesinthe mountingsurface.

6.Disconnectthecamera’sbasefromthebody ofthecamera:withthebasefacingyou, gripthecamera’sbodyandtwistthebase

9.Securethebaseinpositionusingthescrews andnylonwashersprovided,ensuringthatthe camera’scablessitinthecamerabase’scable channels,orfeedthroughthecable-feedhole drilledinthemountingsurface.

10.Re-attachthecameratoitsbaseandtightenthe lockingscrewinthesideofthebaseusingthe suppliedhexwrench(Allenkey).

11.Connectthecamera’scablestotherelevant cablefeeds.

12.Powerupthesystemandcheckthecamera’s feedonyourdisplay.

13.Adjustthepositionoftheballbyhand,toobtain thebestpicture.

28CAM220IP

Page 29

14.T oattachtheexternalplasticcollartothecamera

D13531-1

base,alignthethreelugswiththeslotsinthe base,thenturnthecollarclockwisetolockitinto positionaroundtheball.

Note:Ifthecollarisblockingthecamera’seld ofview,removeit,andrepositiontheballas required.Thecollarcanbere-attachedinoneof threedifferentpositions,andadjustedtoalignthe cut-outwiththecameralens.

Mounting

Page 30

30CAM220IP

Page 31

Chapter6:Operation

Chaptercontents

•6.1Operationinstructionsonpage32

•6.2Webbrowserinterfaceonpage32

•6.3Reversevideoandvideoiponpage35

•6.4Resettingthecameratofactorydefaultsonpage35

Operation

Page 32

6.1Operationinstructions

6.2Webbrowserinterface

Fordetailedoperationinstructionsforyourproduct, refertothedocumentationthataccompaniesyour display.

Networksetupandoperation

Defaultusername,passwordandports

Usernameadmin

Password1234

Ports

IPaddress

CameraIPaddress

Bydefaultthecamera’sIPaddressisassigned automatically.

YoucanndoutwhatIPaddressyourcamerahas beenassignedusing:

•IPscannersoftware(supplied)

•UPnP

•80(HTTP)

•554(RTSP)

•2700(AVstreaming)

•2300(Eventtrigger)

DHCPenabledbydefault(IPaddressis assignedautomatically.)

Note:*Youmayneedtochangeyournetwork settingstoconnecttoaPCrunningWindows7.

Changingnetworksettings-Windows7

Tocongurethenecessarynetworksettingsona Windows7PCfollowthestepsbelow

WiththecameranetworkedtothePC(referto

Chapter4Cablesandconnectionsfordetails.

1.ClickStart.

2.ClickControlPanel.

3.ClickSystemandSecurity.

4.ClickWindowsFirewall.

5.ClickAllowaprogramorfeaturethrough WindowsFirewall.

6.ScrolldownthelisttoNetworkDiscovery.

32CAM220IP

Page 33

7.Placeatickintheboxforthetypeofnetworkthat thecameraison(thisisusuallyPublic).

8.ClickOK.

9.FromtheControlPanelclickNetworkand Internet.

10.ClickNetworkandSharingCenter.

11.ClickChangeadvancedsharingsettings.

12.Clickontherelevantnetworktype(e.g.Public).

13.EnsureTurnonnetworkdiscoveryisselected.

14.ClickSavechangesifyouswitchedonnetwork discovery,or

15.ClickCancelifnetworkdiscoverywasalready turnedon.

2.Double-clickacameraicontoopentheweb interfaceinyourdefaultbrowser.

3.Entertheusernameandpasswordforthecamera andclickLogin.

Findingthecamera'sIPaddressusingIP Scannersoftware

Tousethismethod,yourPC,androuter(ifused) mustsupportUPnP(UPnPisenabledinthecamera bydefault).ThecameraandthePCmustbeonthe samenetwork.

EnsurethecameraisconnectedtoyourPCas describedinChapter4Cablesandconnections.

1.InserttheCDthatwassuppliedwiththecamera intotheCD/DVDdriveofyourPC.

2.NavigatetotheSOFTWAREfolder.

3.DoubleclicktheIPScannerexecutablele(e.g. IPScanUtility.exe).

4.ClicktheSCANbutton. DetailsforanyconnectedIPdeviceswillbe

displayed.

Findingthecamera'sIPaddressusingWindows 7UPnP

Tousethismethod,yourPC,androuter(ifused) mustsupportUPnP(UPnPisenabledinthecamera bydefault).ThecameraandthePCmustbeonthe samenetwork.

EnsurethecameraisconnectedtoyourPCas describedinChapter4Cablesandconnections.

1.ClickStart>Computer>Network.

ThecameraappearsunderNetwork Infrastructure.

Operation

5.Double-clicktherelevantcameraentrytoopen thewebinterfaceusingyourdefaultwebbrowser.

6.Entertheusernameandpasswordforthecamera andclickLogin.

Supportedbrowsers

Thecameraincludesabuilt-inwebinterfacethatcan beaccessedusingawebbrowser.

Thefollowingbrowsersaresupported:

•GoogleChrome

Page 34

•MozillaFirefox

InternetExplorer-ActiveXandFlashPlayer

•AppleSafari

•MicrosoftInternetExplorer7.0orlater,32–bit version(usingActiveX)

SettingupInternetExplorer

IfyouareusingMicrosoftInternetExplorerthenyou mayneedtochangetheinternetsettings.

1.ClickTools>InternetOptions>Security.

TheActiveXplug-inmayprovidesmoothervideo performancethanFlashPlayer.

1.IfyourcomputerhasFlashPlayerinstalled: i.Openthewebinterface. ii.Clickthemessageabovethevideowindow. iii.ClickinsidethevideoareaandselectInstall

thisAdd-onforallusersonthiscomputer.

iv.Followtheonscreenprompts.

2.IfyourcomputerdoesnothaveFlashPlayer installedyouwillbepromptedtoselectifyou wouldliketouseActiveXorFlashPlayer:

•ClicktoplaylivevideowithActiveXcontrol

toreducelatency(Recommended)—Uses theActiveXplug-intoconnecttothecamera. Toinstalltheplug-in,clickonthevideoarea, andselectInstallthisadd-onforallusers onthiscomputer.

2.ClickCustomLevel.

3.UnderDownloadunsignedActiveXcontrols, clickPrompt(recommended)orEnable.

4.ClickOKandthenclickOKagain.

Accessingusingawebbrowser

1.Openyourwebbrowserfromaweb-enabled deviceconnectedtothesamenetworkastheIP camera.

2.Enteryourcamera’sIPaddressinthe browser’saddressbarinthefollowingformat: http://192.168.1.100:80andpressReturn.

3.Entertheusernameandpasswordforthecamera andclickLogin.

•ClicktodownloadthelatestversionofFlash Playertoplaylivevideo—Opensalinkto downloadFlashPlayerfromAdobe’swebsite. Aftercompletingtheinstallation,restartyour browserandopenthewebinterface.

Themainscreenforthecamerawebinterfaceis displayed.Fromhereyoucancongureandview thecamerafeed.

Note:Ifyoudonotseethecamerafeed,make sureyourcomputerhasthelatestversionofAdobe FlashPlayer(Chrome,FirefoxInternetExplorer andSafari)orActiveX(InternetExploreronly) installed.Afterinstallingrestartyourbrowserand reconnecttothecamera.

34CAM220IP

Page 35

6.3Reversevideoandvideoip

1 2

3 4

D13136-1

Thevideofeedcanbereversed(mirrorimage), ippedupsidedownorreversedandipped dependingonyourinstallation.

1.Normalview—Forforwardfacingcameras.

2.Mirror/reverseview—Forcamerasfacingaft.

3.Imageipview—Forforwardfacingcameras,

wherethecameraimageappearsupsidedown.

6.4Resettingthecameratofactory defaults

Followthestepsbelowtoresetyourcamera’s settingstotheirfactorydefaultvalues.

•EnsurethatthecameraandIPcameraare connectedtothesamenetworkasdescribedin theNetworkconnectionsection.

•EnsurethatyourPCsettingshavebeenchanged toallowaccesstothewebinterfaceasdescribed intheNetworksetupandoperationsection.

Note:Thescreenshotsbelowaresubjectto change.

1.Logintothecamera’swebinterface.

2.ClickontheSettingsicon,locatedin

thetoprighthandcornerofthepage. TheSystemInformationpageisdisplayed.

4.Imageipandmirror/reverseview—For

camerasfacingaft,wherethecameraimage appearsupsidedown.

Reversingandippingthevideo

Inordertoreversethevideoimageoriptheimage followthestepsbelow.

Fromthecamera’sWeb-interface:

1.ClicktheCameraicononthelefthandsideof

thepage.

2.ClickCameraSetupfromthequicklinks.

3.SelecttherelevantoptionfromtheMirrordrop

downbox. Theoptionsavailableare:

•Off—Forforwardfacingcameras.

•Mirror—Forcamerasfacingaft.

•V-ip—Forforwardfacingcameras,where

thecameraimageappearsupsidedown.

•Rotate—Forcamerasfacingaft,wherethe

cameraimageappearsupsidedown.

3.ClickFACTORYDEFAUL Tfromthequicklinks,

locatedonthelefthandsideofthepage.

Operation

4.ClickFACTORYDEFAUL TS,locatednearthe

centerofthepage. Thecamerawillnowresetitselftofactorydefault

settings.

Page 36

36CAM220IP

Page 37

Chapter7:Maintenance

Chaptercontents

•7.1Routinechecksonpage38

•7.2Unitcleaninginstructionsonpage38

Maintenance37

Page 38

7.1Routinechecks

7.2Unitcleaninginstructions

Thefollowingperiodicchecksshouldbemade:

•Examinecablesforsignsofdamage,suchas chang,cutsornicks.

•Checkthatthecableconnectorsarermly attachedandthattheirlockingmechanismsare properlyengaged.

Note:Cablechecksshouldbecarriedoutwiththe powersupplyswitchedoff.

Warning:Highvoltage

Thisproductcontainshighvoltage. Adjustmentsrequirespecializedservice proceduresandtoolsonlyavailableto qualiedservicetechnicians.Thereare nouserserviceablepartsoradjustments. Theoperatorshouldneverremovethe coverorattempttoservicetheproduct.

Theunitdoesnotrequireregularcleaning.However, ifyounditnecessarytocleantheunit,pleasefollow thestepsbelow:

1.Ensurepowerisswitchedoff.

2.Wipeunitcleanwithadampcloth.

3.Ifnecessary,useamilddetergentsolutionto removegreasemarks.

38CAM220IP

Page 39

Chapter8:Systemchecksandtroubleshooting

Chaptercontents

•8.1Troubleshootingonpage40

•8.2LEDstatusonpage40

•8.3IPcameratroubleshootingonpage41

•8.4Resettingthecameraonpage42

Systemchecksandtroubleshooting

Page 40

8.1Troubleshooting

8.2LEDstatus

Thetroubleshootinginformationprovidespossible causesandcorrectiveactionrequiredforcommon problemsassociatedwithmarineelectronics installations.

AllRaymarineproductsare,priortopackingand shipping,subjectedtocomprehensivetestand qualityassuranceprograms.However,ifyou experienceproblemswiththeoperationofyour productthissectionwillhelpyoutodiagnose andcorrectproblemsinordertorestorenormal operation.

Ifafterreferringtothissectionyouarestillhaving problemswithyourunit,pleasecontactRaymarine TechnicalSupportforfurtheradvice.

TheunithasanLEDstatusindicatortohelp determinethecamera’sstate.

LEDsequenceLEDcolorState

SolidRedPowerOn

SolidGreen

BlinkinggreenMotiondetection

Network connectedand transmitting

40CAM220IP

Page 41

8.3IPcameratroubleshooting

Problem

PossibleSolutions

Cameradoesnotpoweron.PoweroverEthernet(PoE)connection

•Ensurethattheethernetcableisconnectedcorrectlyandthatconnectionsaresecure.

•Ensureyouarenotusingacrossovercouplerorcableastheyarenotappropriatefor PoEapplications.

•EnsurethatthePowerSourcingEquipment(PSE)deviceisswitchedonandhassufcient remainingpowerallocationtopowerthecamera.

Dedicatedpowercableconnection

•Ensurethatthepowersupplymeetsthecamera’spowerrequirements.

•Ensurethatthepowersupplyisswitchedon.

•Ensurepowercablesarecorrectlyconnectedandthatconnectionsaresecure.

Note:RefertotheChapter10T echnicalspecicationforcamerapowerrequirements.

PSEisallocatingPoEtothe cameraeventhoughitis poweredusingaseparatepower supply.

Noimageonmultifunction display

•PoEallocationalwaystakespriorityoverthededicatedpowersupply.Ifconnectingthe cameratoaPSEensurethatthecamera’sdedicatedpowercableisnotconnected.

•Alternativelyre-congurethenetworksothecameraispluggedintoanon-PoEethernet connection.

•UsingtheCameraapplicationontheMFD,Cyclethroughtheavailablecamerafeedsto seeiftheIPcameraimageisdisplayed

•Ensurethatthecameraisconnectedtothemultifunctiondisplayinaccordancewiththe suppliedinstructions.

•Ensurethatthecameraiscorrectlypoweredon.

•EnsurethattheMFDandcameraarephysicallyconnectedtothesamenetwork.

•EnsurethattheMFDisrunningthelatestversionofLightHousesoftware.

•TrypowercyclingtheIPcamerawhilstleavingyourmultifunctiondisplaypoweredup.

Videoperformspoorly•Insufcientbandwidthavailableforhighqualitystream.UsingaconnectedPC,selectan

alternative,lowerresolutionstreamtoconservebandwidthandimproveperformance onlowbandwidthconnections.

•IfusingaPCandMicrosoftInternetExplorer,clickthemessageabovethevideoareato usetheActiveXplug-ininsteadofFlashPlayer.ActiveXmayprovidesmoothervideo performance.

Can’tndthecamera’sIP address(PCconnections).

Bydefault,thecameraissettoobtainanIPaddressbyDHCP,whichmeansitwill automaticallyobtainanIPaddressfromthenetwork.

•EnsurethatthePCandcameraareconguredforthesameIPaddressrangeandsubnet mask(IPv4).

•TrytoPingthecamera’sIPaddress.OnyouPCgoto:Start>Programs>Accessories >CommandPromptandtypepingthenthecamera’slocalIPaddressandpressEnter. Ifyougeta‘requesttimedout’messagethePCandcameraarenotonthesamenetwork orthecameraisnotconnected.Thecameraisconnectedifyougetreplies.

Systemchecksandtroubleshooting

•EnsureanyVPNsoftwareinstalledonthePCisdisabled.

•WithUPnPenabledgoto:MyComputer>Networkandcheckundernetwork infrastructure.

•EnsureyourPC’snetworksettingsareconguredcorrectly.

•UsethesuppliedIPScannersoftwaretondoutthecamera’sIPaddress.

Note:RefertoNetworksetupandoperationfordetailsonnetworksettings.

Page 42

8.4Resettingthecamera

WhenconnectedtoanMFDitshouldnotbe necessarytoperformafactoryreset.Howeverinthe eventthatafactoryresetisrequiredthecamera’s built-inwebinterfacemustbeused.Thecamera’s webinterfacecanbeaccessedwhenconnectedtoa web-enableddevicesuchasaPC.

Pleasereferto6.4Resettingthecameratofactory

defaultsfordetails.

CAM220IP

Page 43

Chapter9:Technicalsupport

Chaptercontents

•9.1Raymarineproductsupportandservicingonpage44

Technicalsupport

Page 44

9.1Raymarineproductsupportand servicing

RegionTele-

E-mail

phone

Raymarineprovidesacomprehensiveproduct supportservice,aswellaswarranty,service,and repairs.Y oucanaccesstheseservicesthroughthe Raymarinewebsite,telephone,ande-mail.

Productinformation

Ifyouneedtorequestserviceorsupport,please havethefollowinginformationtohand:

•Productname.

•Productidentity .

•Serialnumber.

•Softwareapplicationversion.

•Systemdiagrams.

Youcanobtainthisproductinformationusingthe menuswithinyourproduct.

Servicingandwarranty

Raymarineoffersdedicatedservicedepartmentsfor warranty,service,andrepairs.

Don’tforgettovisittheRaymarinewebsiteto registeryourproductforextendedwarrantybenets:

http://www.raymarine.co.uk/display/?id=788.

RegionTele-

E-mail

phone

United Kingdom(UK), EMEA,and

+44

emea.service@raymarine.com

(0)1329 246932

AsiaPacic

UnitedStates (US)

+1(603)

rm-usrepair@ir.com

3247900

Australiaand NewZealand

+612 8977 0300

France

+33(0)1 464972 30

Germany

+49 (0)40237 8080

Italy+3902

9945 1001

Spain

+3496 2965102

Netherlands+31

(0)26 3614905

Sweden

+46 (0)317 633670

Finland+358

(0)207 619937

Norway+47692

64600

Denmark+45437

16464

Russia+7495

7880508

aus.support@raymarine.com

(Raymarinesubsidiary)

support.fr@raymarine.com

(Raymarinesubsidiary)

support.de@raymarine.com

(Raymarinesubsidiary)

support.it@raymarine.com

(Raymarinesubsidiary)

sat@azimut.es

(AuthorizedRaymarine distributor)

support.nl@raymarine.com

(Raymarinesubsidiary)

support.se@raymarine.com

(Raymarinesubsidiary)

support.@raymarine.com

(Raymarinesubsidiary)

support.no@raymarine.com

(Raymarinesubsidiary)

support.dk@raymarine.com

(Raymarinesubsidiary)

info@mikstmarine.ru

(AuthorizedRaymarine distributor)

Websupport

Pleasevisitthe“Support”areaoftheRaymarine websitefor:

•ManualsandDocuments—http://www.rayma-

rine.co.uk/display/?id=10125

•FAQ/Knowledgebase—http://www.rayma-

rine.co.uk/knowledgebase/

•Technicalsupportforum—http://rayma-

rine.ning.com/

•Softwareupdates—http://www.rayma-

rine.com/software

Telephoneande-mailsupport

RegionTele-

E-mail

phone

UnitedKingdom (UK),EMEA, andAsiaPacic

UnitedStates (US)

+44

support.uk@raymarine.com

(0)1329 246777

+1(603)

support@raymarine.com

3247900 (Toll-free: +800539

5539)

CAM220IP

Page 45

Chapter10:Technicalspecication

Chaptercontents

•10.1Technicalspecicationonpage46

Technicalspecication

Page 46

10.1Technicalspecication

Physicalspecication

Dimensions•Basediameter:99.2mm

(3.9in)

•OverallHeight:80.7mm (3.2in)

Videostreaming

FrameRate

BitRateControl

Supportsmultistreamingwith H.264,MJPEG

•H.264:30fps@1920x 1080p

•MJPEG:30fps@VGA resolution

•Dualstream:H.264, MJPEG

Weight

•Boxed:0.65kg(1.4lbs)

•Unboxed:0.55kg(1.2 lbs)

Powerspecication

Nominalsupplyvoltage12Vdc

Operatingvoltagerange

Powerconsumption

Current

PoweroverEthernet

10.8Vto13.2Vdc

5.4WMaximum(IRLEDs

On)

1.5A

PoEClass2(6.49WMax) device(802.3af)

Environmentalspecication

Operatingtemperature–10°Cto50°C(14°Fto

122°F)

Storagetemperature–20°Cto60°C(–4°Fto

140°F)

Relativehumidity

95%

•H.264:CBR/CVBR

Conformancespecication

Conformance

•EN60945:2002

•EMCDirective 2004/108/EC

•AustraliaandNew Zealand:C-Tick, ComplianceLevel2

WeatherproofratingIPX6&IPX7

Cameraspecication

Sensor/DSP2.0Megapixel1/2.8”Sony

CMOSimagesensor

Scanningsystem

Day/NightTrueDay/NightwithICR

Totalpixels

Effectpixels1944(H)x1104(V)2.14Mega

Minimumillumination

I2Distance

Lens

Progressivescan

lterchanger

1952(H)x1116(V)2.18Mega pixel

pixel

0Lux(IRLEDsOn)

20m(65.6ft.)(4LEDs)

3.6mmMegapixelboard lens

Videospecication

CompressionH.264HighProle@level

4.0,MotionJPEG

Resolutions

46CAM220IP

1280x720default (supportingupto1920x 1080(FHD)

Page 47

Chapter11:Sparesandaccessories

Chaptercontents

•11.1Networkhardwareonpage48

•11.2RayNettoRJ45adaptercablesonpage49

•11.3Networkcableconnectortypesonpage50

•11.4RayNettoRayNetcablesandconnectorsonpage51

Sparesandaccessories

Page 48

11.1Networkhardware

Item

Part numberNotes

HS5RayNet networkswitch

RJ45SeaTalk networkswitch

RJ45SeaTalk crossovercoupler

A80007

E55058

E55060•Enablesdirectconnection

5–portswitchfornetwork connectionofmultiple devicesfeaturingRayNet connectors.Equipmentwith RJ45SeaTalk

connectors canalsobeconnectedusing suitableadaptercables.

8–portswitchfornetwork connectionofmultiple SeaTalk

devicesfeaturing

RJ45connectors.

ofRJ45SeaTalk

devices tosmallersystemswhere aswitchisnotrequired.

•Enablestheconnectionof RJ45SeaTalk

devices toaHS5RayNetnetwork switch(inconjunctionwith suitableadaptercables).

•Enables2RJ45SeaTalk cablestobeconnected togethertoextendthe lengthofthecabling.

EthernetRJ45 coupler

Recommendedforinternal installations.

Important:DoNOTuse crossoverdevicesforPOE (PowerOverEthernet) connections.

R32142•Enablesdirectconnection

ofRJ45SeaTalk tosmallersystemswhere aswitchisnotrequired.

•Enablestheconnectionof RJ45SeaTalk toaHS5RayNetnetwork switch(inconjunctionwith suitableadaptercables).

•Enables2RJ45SeaTalk cablestobeconnected togethertoextendthe lengthofthecabling.

Recommendedforexternal installations.

devices

48CAM220IP

Page 49

11.2RayNettoRJ45adaptercables

D13158-1

A80160

400 mm (1.3 ft)

A80151

3 m (9.84 ft)

A80159

10 m (32.8 ft)

A62360

1 m (3.28 ft)

A80276

3 m (9.84 ft)

A80272

400 mm (1.3 ft)

A80247

100 mm (3.9 in)

DescriptionTypicaluseQuantity

AdaptercablewithaRayNet(female) socketononeend,andawaterproof (female)socketontheotherend acceptingthefollowingcableswithan

RJ45SeaTalk

waterprooflocking

(male)plug:

•A62245(1.5m).

•A62246(15m).

AtypicaluseforthisadaptercableistoconnectaDSM300 sonarmoduletoaLightHouseMFD,usingall-waterproof cableconnections.Thisadaptercablewillalsoacceptthe followingRJ45SeaTalk

cables,althoughtheRJ45plug thatconnectsattheequipmentend(e.g.DSM300)willNOT bewaterproof:

•E55049(1.5m).

•E55050(5m).

•E55051(10m).

•A62135(15m).

•E55052(20m).

AdaptercablewithaRayNet(female) socketononeend,andawaterproof (female)RJ45socketontheother

DirectlyconnectaRaymarineradarscannerwithanRJ45

SeaTalk

(male)cabletoaRayNetnetworkswitch(e.g.

HS5)orLightHouseMFD.

end,alongwithalockingglandfora watertightt.

AdaptercablewithaRayNet(male) plugononeend,andanRJ45

SeaTalk

waterproof(male)plugon

theotherend.

AdaptercablewithaRayNet(female) socketononeend,andanRJ45

SeaTalk

waterproof(male)plugon

theotherend.

AdaptercablewithaRayNet(female) socketononeend,andanRJ45

SeaTalk

(female)socketonthe

otherend.

ConnectalegacyG-SeriesGPM-400,C-SeriesWidescreen orE-SeriesWidescreenMFDtoaRaymarineradarscanner suppliedwithaRayNetpower/datacable.

ConnectalegacyG-SeriesGPM-400,C-SeriesWidescreen orE-SeriesWidescreenMFDtoaRayNetnetworkswitch (e.g.theHS5).

ConnectaLightHouseMFDtoalegacySR6switch/ weatherreceiveroralegacy8–portSeaTalk

switch.Anothercommonuseforthecableisinconjunction withacrossovercoupler(E55060orR32142)toconnect RaymarineproductswithanRJ45connection(e.g.radar scanner,thermalcameraorDSM300)toaLightHouseMFD orRayNetnetworkswitch(e.g.theHS5).

network

Sparesandaccessories

Page 50

11.3Networkcableconnectortypes

Thereare2typesofnetworkcableconnector— RayNet,andRJ45SeaT alk

RJ45SeaTalk

connector.

RayNetconnector.

50CAM220IP

Page 51

11.4RayNettoRayNetcablesandconnectors

D13160-1

2 3

A80161 A62361 A80005 A62362 A80006

400 mm (1.3 ft) 2 m (6.56 ft) 5 m (16.4 ft) 10 m (32.8 ft) 20 m (65.6 ft)

A80162

100 mm (3.9 in)

R70014 A80262

DescriptionTypicaluseQuantity

StandardRayNetconnectioncable withaRayNet(female)socketonboth ends.

RayNetcablepuller(5pack).

3RayNettoRayNetright-anglecoupler

/adapter.

AdaptercablewithaRayNet(male) plugonbothends.

SuitableforconnectingallRayNetequipmentdirectlyto LightHousemultifunctiondisplaysfeaturingaRayNet connector.CanalsobeusedtoconnectRayNetequipment viaaRayNetnetworkswitch(e.g.HS5).

These“handles”securelyattachtothetwist-lockonRayNet cables,enablingyoutopullthecablesthroughconduitsand otherobstacles.

SuitableforconnectingRayNetcablesat90°(rightangle)to devices,forinstallationswherespaceislimited.Forexample, usethisadaptertoconnectaRayNetcabletoamultifunction displaywhenthereisnotenoughspacebehindthedisplayfor theusualcablebendradiusrequiredbyastandardRayNet cable.ThisadapterfeaturesaRayNet(female)socketat oneend,andaRayNet(male)plugattheotherend.

Suitableforjoining(female)RayNetcablestogetherfor longercableruns.

Sparesandaccessories

Page 52

52CAM220IP

Page 53

Page 54

www.raymarine.com

Raymarine UK Limited, Marine House, Cartwright Drive, Fareham, PO15 5RJ. United Kingdom.

Tel: +44 (0)1329 246 700

FLIR CAM220IP User guide

Specifications and Main Features

Frequently Asked Questions

User Manual

PowerOverEthernet(PoE)

Wateringress

Disclaimer

EMCinstallationguidelines

Connectionstootherequipment

Declarationofconformity

Productdisposal

Warrantyregistration

Suppressionferrites

IMOandSOLAS

Technicalaccuracy

2.1Documentinformation

2.2Productoverview

3.1Installationchecklist

3.2Compatiblemultifunctiondisplays

3.3Partssupplied

3.4Toolsrequired

3.5T ypicalsystems

3.6Warningsandcautions

3.7Generallocationrequirements

3.8Cameraorientation

3.9Productdimensions

4.1Generalcablingguidance

4.2Connectionsoverview

4.3Poweroptions

4.4Powerconnection

4.5Networkconnection

5.1Mountingtheunit

6.1Operationinstructions

6.2Webbrowserinterface

6.4Resettingthecameratofactory defaults

7.1Routinechecks

7.2Unitcleaninginstructions

8.1Troubleshooting

8.2LEDstatus

8.3IPcameratroubleshooting

8.4Resettingthecamera

9.1Raymarineproductsupportand servicing

11.1Networkhardware

11.2RayNettoRJ45adaptercables

11.3Networkcableconnectortypes

11.4RayNettoRayNetcablesandconnectors