Fisher 34436 User Manual

395 Kb
Loading...

 

Replacement Parts for Pre-Rinse Units

 

2924-6000

 

2914

 

 

 

 

 

 

 

 

11355

 

 

 

 

 

 

 

 

 

SPRAY VALVE

SPRING

 

STAINLESS STEEL

 

 

 

 

 

 

 

 

REPAIR KIT

GOOSENECK

 

HOSE 36”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1000-3301

 

 

 

2949-3001

2949-9002

 

 

1000-5001

 

 

 

 

 

 

 

 

 

 

BLUE BUMPER

 

 

 

 

 

 

 

NOZZLE FOR

 

 

2912-6000

 

 

 

 

 

 

 

 

 

 

 

 

2949 SPRAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2922-5000

VALVE

 

 

 

 

 

 

1000-0001

 

 

 

 

 

 

 

 

 

 

 

 

WASHER

 

 

 

 

 

 

 

 

INCLUDES:

 

 

2932-0002

 

 

 

 

 

 

 

 

1000-5003 WASHER

 

 

IN-LINE CHECK

 

 

 

 

 

 

 

 

1000-7502 SCREW

 

 

VALVE

 

 

 

 

 

 

 

 

 

 

2925-6300

 

 

 

 

 

 

 

 

 

 

2922-5000

 

 

 

 

 

 

 

 

 

 

 

 

HOSE HOOK

 

 

 

 

 

 

 

 

 

 

1000-0003

 

 

2913

 

 

 

 

 

 

 

 

 

 

 

2949-8600

 

 

 

 

 

 

 

 

 

INSULATED

 

 

 

1000-5005

 

 

 

 

 

CUP WASHER

 

 

 

2909-5000

2926-3300

 

HANDLE

 

 

 

 

 

 

 

 

 

O-RING

 

PIPE TO HOSE

 

 

 

 

 

 

 

 

 

 

2909-3400

ADAPTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10014 (24”)

 

2912-2501

 

 

 

 

 

2949 ULTRA SPRAY

 

 

 

 

 

 

 

 

10022 (36”)

 

 

 

 

 

 

 

 

VALVE

 

 

SUPPLY LINE

 

 

 

 

 

 

 

 

 

 

1/2” F x 1/2” F

2912-7501

 

 

 

 

2927-4303

 

 

 

10049 (24”)

 

 

 

 

2902-12

 

 

 

 

 

 

 

 

 

3/8” PIPE

2949-9001

 

 

10006 (36”)

 

 

 

 

 

 

WALL BRACKET

 

 

 

 

 

 

 

 

16” RISER

 

 

SUPPLY LINE

 

 

 

 

 

 

SCRUB BRUSH

 

2909-6000

 

 

 

 

 

 

1/2” M x 1/2” F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2400-2103

 

 

 

 

 

1792

 

1790-1

 

 

 

 

 

 

 

 

 

ANGLE STOP

 

 

 

 

 

 

 

 

ANGLE STOP

 

13196

 

ELBOWS

 

 

 

 

 

W/ CROSS

 

 

 

 

 

 

 

WITH KEY

 

 

 

 

 

 

 

 

 

HANDLES

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

VALVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1000-7502

3000-0011

 

 

10464

 

2000-2301

2000-7500

 

 

 

SEAT SCREW

RH SWIVEL

 

 

2000-7500

 

 

 

STEM

 

 

DUCK GASKET

LEVER HANDLE

SCREW

 

 

 

 

 

 

 

 

 

 

 

 

 

SCREW

3000-0000

 

 

 

 

 

 

 

 

 

 

 

 

RH SWIVEL

 

 

 

 

 

 

 

 

 

 

 

2000-8000

REPAIR KIT

10456

2000-5003

2000-5000 2000-3002

2000-8000

 

 

RED BUTTON

 

RED BUTTON

 

LUBE

 

WASHER

BIBB CAP

 

AND

 

SEAT WASHER

 

AND

 

 

2000-8001

 

 

 

 

 

 

 

 

 

2000-8001

 

BLUE BUTTON

 

 

 

 

 

 

 

 

 

BLUE BUTTON

 

2000-2301

 

 

 

 

 

 

 

 

 

 

 

 

LEVER HANDLE

 

3967

 

 

 

 

 

 

 

 

 

 

 

16” SWING SPOUT

 

 

 

 

 

 

 

 

 

2000-3002

 

3964

 

 

 

 

 

 

 

 

 

BIBB CAP

 

14” SWING SPOUT

 

 

 

 

 

 

 

 

 

10464

2000-0004

3963

 

 

 

 

 

 

 

 

 

12” SWING SPOUT

 

 

 

 

 

 

 

 

 

DUCK GASKET

RH CHECK STEM

 

 

 

 

 

 

2901-0000

 

 

3962

 

 

 

 

 

 

 

 

 

REPAIR KIT

 

 

 

 

 

 

ADD-ON CONTROL

 

2000-5000

OR

10” SWING SPOUT

 

 

 

 

 

 

 

 

 

 

 

 

 

VALVE LESS SPOUT

 

WASHER

2000-0005

3961

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LH CHECK STEM

8” SWING SPOUT

 

 

 

 

 

 

 

 

 

2000-3406

REPAIR KIT

3960

 

 

 

 

 

 

 

 

 

LH CHECK STEM

 

6” SWING SPOUT

 

 

 

 

 

 

15621

 

 

OR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPOUT NUT

 

2000-3407

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RH CHECK STEM

 

 

 

 

 

 

 

 

 

2002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3200-2306

18694

2200-5000

 

 

SNAP RING

 

2000-6000

 

 

 

 

 

CONCENTRIC

1/2” CONCENTRICS

CONCENTRIC

12564

 

1600-5000

 

 

SPRING

 

 

 

FLANGES

 

 

GASKETS

 

SPOUT

 

 

 

 

 

2.2 GPM

 

 

 

 

 

 

 

 

 

 

 

 

O-RINGS

 

 

2000-0001

 

 

 

 

 

 

 

AERATOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10456

 

 

RETAINER

 

 

 

 

 

 

 

 

 

 

 

ASSEMBLY

 

 

 

 

 

 

 

 

 

LUBE

 

 

10456

MANFACTURING COMPANY

 

 

 

 

 

19119

 

LUBE

 

 

 

 

 

SWIVEL SPOUT

 

 

PO BOX 60, TULARE, CA 93275

 

 

 

 

 

RETRO-FIT KIT

 

 

(800)421-6162, FAX: (800)832-8238

 

 

 

 

 

 

 

PART NO. 41157

 

www.fisher-mfg.com

 

 

 

 

 

 

 

REV. B

fisher manufacturing company

8” C/C Backsplash Mount Pre-Rinse Unit

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual field situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external finish (except at date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.

A full and complete copy of our One Year limited warranty is available upon request.

WARNING:

Proposition 65 requires that we provide you with the following notice: “This product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.”

#34436 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 6” Swing Spout

#34444 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 8” Swing Spout

#34452 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 10” Swing Spout

#34460 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 12” Swing Spout

#34479 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 14” Swing Spout

#34487 - Pre-Rinse Unit: 8” C/C Backsplash Mount, Wall Bracket & Add-On Faucet with 16” Swing Spout

KEEP THIS MANUAL FOR FUTURE REFERENCE

ANSI/A112.18.1M, ANSI/NSF 61.9

fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238

www.fisher-mfg.com

Installation Instructions for Pre-Rinse Units

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION

Installation Notes:

Be sure to shut off water supply before beginning.

Use pipe thread sealant such as PST on all threaded joints.

Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

 

• Medium Sized Crescent Wrenches

 

Pipe Thread Sealant

 

Phillips Screwdriver

PST

7/16” Drill Bit

 

1/8” Allen Wrench

 

Installation Instructions

1.Insert the gasket into the groove on the concentric. Making sure the gasket is in place, loosely mount the concentrics and flange onto the control valve body.

2.Mount the small riser to the control valve body using thread sealant. Screw the add-on faucet to the other end of the small riser, again using thread sealant.

3.Mount control valve body to the backsplash by inserting the concentrics through the backsplash and attaching slip joints. Attach elbows or supply lines and tighten concentrics. Be sure to use pipe thread sealant on all threads.

4.Mount the pipe to hose adapter to the enclosed riser using thread sealant. Mount the other end of the riser to the female outlet of the add-on body.

5.If no wall bracket is to be installed, proceed to Step 6, otherwise do the following:

a.Locate and drill a Ø7/16” hole in the wall directly behind and about 3/4 the way up the riser pipe.

b.Loosely attach the front and back of the pipe clamp onto the riser pipe.

c.Hold the wall bracket flange against the wall, centered with the hole. Use the wall screws and a screw driver to mount the flange to the wall.

d.Slide part, but not all, of the wall bracket rod nonthreaded end first through the center hole of the flange and into the wall.

e.Align the rod with the pipe clamp and thread the rod into the pipe clamp. Be sure the rod is level by adjusting the pipe clamp position.

f.Once level, fix the rod in place by tightening both the set screw located in the flange and the pipe clamp screws.

6.Slip the hose hook over the pipe to hose adapter. Using thread sealant and a crescent wrench, thread the SS hose into the pipe to hose adapter.

7.Install gooseneck spring by slipping SS hose through the spring. Spring will fit over adapter which holds it in an upright position. Note: Be sure spring is installed as shown. DO NOT INSTALL SHORT BEND DOWN.

Step 1

Step 2

ISHER

Step 3

Ø7/8”

Gasket

Concentric

Flange

Thread Sealant

Goes Here

ISHER

ISHER

Slip Joints

7 3/4” - 8 1/4[196.9 - 209.6mm]

Installation Instructions Continued

8. Fit one of the handle gaskets inside the outlet of the

Step 4

insulated handle and mount the spray valve onto it.

 

9.Fit the other handle gasket inside the inlet of the insulated handle and mount the handle onto the

SShose. If installing backflow preventer, attach it between the SS hose and insulated handle. Be sure that gaskets are used on both sides of the backflow preventer

10.If installing a brush, do so by pressing brush into the bumper of the spray valve until secure.

11. To install swing spout to add-on faucet, apply o-ring lube to the o-rings on the swing spout. Make sure the white snap ring is in place before mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the add-on faucet spout outlet.

12. Turn on water supply and check for leaks.

Step 5

Step 6

Step 7

 

Excess Rod Length

 

 

Trim to Fit (optional)

Spring Bend

 

Wall

On This Side

 

 

Thread Sealant

Wall Screw Goes Here

Set Screw

Pipe

Clamp

Riser Pipe

Step 9

Step 10

Step 11

Swing Spout

Handle Gasket

Apply O-Ring

Lube Here

Thread Sealant

Goes Here

Step 8

Handle Gasket

Step 12