Files for DD36
Size:
4.59 Mb
Download

DishDrawerTM dishwasher

User guide

DD24, DD60 DD36, DD90 models

US CA NZ AU GB IE

This user guide is an accompaniment to your ‘Quick start guide’ which is included with your dishwasher.

For operating instructions, see your ‘Quick start guide’. If you no longer have your ‘Quick start guide’, you can download it from our local website, listed on the back cover.

Refer to your ‘Quick start guide’ for information on:

Starting a wash

Wash programs and when to use them

Controls

Dos and don’ts of loading

Preference options and how to change their settings

Contents

 

1

 

 

Electrical connection (GB IE only)

2

 

Safety and warnings

3

 

Caring for your dinnerware

7

 

Racking features

8

 

Loading suggestions

12

 

Water hardness and dishwashing

13

 

Wash programs and detergent quantities

14

 

Adding detergent

16

 

Using rinse aid

18

 

Water softener

19

 

User maintenance instructions

22

 

Troubleshooting

30

 

If there is a fault

33

 

How to attend to a fault

 

 

Classic models

34

 

Designer models

36

 

Integrated models with badge

38

 

Integrated models with remote control

40

 

Warranty and service

42

 

Wash program data

44

 

Standards test

 

 

USA and Canada

52

 

New Zealand and Australia

54

 

Great Britain and Ireland

56

 

Important!

SAVE THESE INSTRUCTIONS

The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed on the back cover or contact your local Fisher & Paykel dealer.

2 Electrical connection(GB IE only)

For Great Britain only

 

 

 

 

Fuse cover

 

 

 

 

Important!

Fuse

 

 

 

This appliance must be earthed.

Fuse replacement

The mains lead of this appliance is fitted with a BS 1363A 13 A fused plug. To change a fuse in this type of plug, use an ASTA approved fuse to BS 1362 type and proceed as follows:

1 Remove the fuse cover and fuse.

2 Fit the replacement 13A fuse into the fuse cover.3 Refit both into plug.

Important!

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost, the plug must not be used until a correct replacement is fitted.

Correct replacements are identified by the colour insert or the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland

The information given in respect to Great Britain will frequently apply, but a third type of plug and socket is also used: the 2-pin,side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact an Authorised Service Agent. Please do not attempt to change the plug yourself. This procedure must be carried out by a qualified service technician in compliance with the manufacturer’s instructions and current standard safety regulations.

Safety and warnings 3

Your dishwasher has been carefully designed to operate safely during normal dishwashing procedures. Please keep the following instructions in mind when you are using your dishwasher.

IMPORTANT SAFETY INSTRUCTIONS

WARNING! - When using your dishwasher, follow basic precautions, including the following: Read all instructions before using the dishwasher.

The information in this manual must be followed to minimise the risk of fire or explosion or to prevent property damage, personal injury or loss of life.

Use the dishwasher only for its intended function as described in this user guide and in your ‘Quick start guide’.

This appliance is intended to be used in household and similar applications such as:

staff kitchen areas in shops, offices and other working environments;

farm houses;

by clients in hotels, motels and other residential type environments;

bed and breakfast type environments.

Use only detergents or rinse aid recommended for use in a domestic dishwasher and keep them out of reach of children. Check that the detergent dispenser is empty after the completion of each wash program.

When loading items to be washed, locate sharp items so that they are not likely to damage the internal lid of the dishwasher and load sharp knives with the handle up to reduce the risk of cuttype injuries.

Do not touch the filter plate (the round metal disc in the dishwasher base) during or immediately after use, as it may be hot from the heater plate underneath.

Do not operate your dishwasher unless all enclosure panels are properly in place. Do not tamper with the controls.

Do not abuse, sit on, stand in or on the drawer or dish rack of the dishwasher.

The drawer should not be left in the open position since this could present a tripping hazard. The adjustable racks are designed to support cups, glasses and kitchen utensils. When the adjustable racks are in the drawer do not lean on or use them to support your body weight. To reduce the risk of injury, do not allow children to play in or on the dishwasher.

Under certain conditions, hydrogen gas may be produced in a hot water heater system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher, turn on all hot water taps and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.

Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.

4 Safety and warnings

IMPORTANT SAFETY INSTRUCTIONS

Installation

This dishwasher must be installed and located in accordance with the Installation instructions before it is used. If you did not receive Installation instructions with your dishwasher, you

can order them by calling your Authorised Repairer or download them from our local Fisher & Paykel website, listed on the back cover.

Installation and service must be performed by a qualified technician.

If the power supply cord is damaged, it must be replaced by a dealer or Authorised Repairer or a similar qualified trades person in order to avoid a hazard.

Ensure the dishwasher is secured to adjacent cabinetry using the brackets provided. Failure to do so may result in an unstable product, which may cause damage or injury.

Do not operate this appliance if it is damaged, malfunctioning, partially disassembled or has missing or broken parts, including a damaged power supply cord or plug.

Do not store or use petrol, or other flammable vapours and liquids in the vicinity of the dishwasher.

Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. Make sure that the power supply cord is located so that it will not be stepped on, tripped over or otherwise subject to damage or stress.

Do not install or store the dishwasher where it will be exposed to temperatures below freezing or exposed to weather.

Do not use an extension cord or a portable electrical outlet device (e.g. multi-socketoutlet box) to connect the dishwasher to the power supply.

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-groundingconductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded

in accordance with all local codes and ordinances. WARNING - Improper connection of the equipment-groundingconductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified technician.

If the dishwasher is installed as a permanently connected appliance:

GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-groundingconductor must be run with the circuit conductors and connected to theequipment-groundingterminal or lead on the appliance.

Safety and warnings 5

IMPORTANT SAFETY INSTRUCTIONS

Maintenance

Disconnect the appliance from the power supply before any cleaning or maintenance.

When disconnecting the appliance pull the plug rather than the power supply cord or junction of cord to avoid damage.

Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this user guide. We recommend that you contact Customer Care to arrange service. See your ‘Service and warranty’ booklet for contact details.

Keep the floor around your appliance clean and dry to reduce the possibility of slipping. Keep the area around/underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags and chemicals.

Models with a remote control: Do not attempt to recharge, short-circuit,disassemble, heat or throw the remote control battery into a fire. Dispose of an old battery responsibly, keeping it out of reach of children.

Operational

Under no circumstances should you open the drawer whilst the dishwasher is in operation. Always press thebutton to pause and wait until you hear the three additional beeps before opening the drawer.

The dishwasher must be used with the motor assembly, filter plate, drain filter and spray arm(s) in place. To identify what these parts are, see drawings in section ‘User maintenance instructions’ of this user guide.

Take care when loading the drawer not to load dishware items so they prevent the internal lid from properly sealing with the drawer. Items should be placed so they do not protrude above and/or forced into the drawer, otherwise a service call may result.

Household appliances are not intended to be played with by children. Children or persons with a disability which limits their ability to use the appliance, should have a responsible person instruct them in its use. The instructor should be satisfied that they can then use the appliance without danger to themselves or their surroundings.

Close supervision is necessary if this appliance is used by or near children. Do not allow children to play inside, on or with this appliance or any discarded appliance.

If a dishwasher cleaner is used, we would strongly recommend a wash program with detergent should be run immediately afterward, to prevent any damage to the dishwasher.

The dishwasher is designed for washing normal household utensils. Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals are not to be washed in the dishwasher.

If the dishwasher is not being used for long periods of time, turn the electricity and water supply to the dishwasher off.

6 Safety and warnings

IMPORTANT SAFETY INSTRUCTIONS

Operational - models with remote control

To prevent unauthorized use, keep the remote control out of reach of children.

Make sure that you keep the remote away from water and steam. Do not immerse and take care not to drop the remote control into water. This may damage the parts or lead to malfunction. Damage or malfunction caused by exposure to water or steam is not covered by warranty.

Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Do not tamper with or modify the remote control or the dishwasher in any way, as doing so will void the certification of the device.

This device complies with Industry Canada licence-exemptRSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Complies with

IDA Standards

DB104887

SAVE THESE INSTRUCTIONS

Caring for your dinnerware 7

The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the dishwasher. Remember, if in any doubt about any aspect

concerning items washed in the dishwasher, follow the instructions from the manufacturer of the items, or wash the item by hand.

Cutlery & silverware

All cutlery and silverware should be rinsed immediately after use to prevent tarnishing caused by some foods. The Rinse wash program is useful for this. Silver items should not come into contact with stainless steel, eg other cutlery. Mixing these items can cause staining. Remove silver cutlery from the dishwasher and hand dry it immediately after the program has finished.

Aluminium

Aluminium can be dulled by dishwasher detergent. The degree of change depends on the quality of the product.

Other metals

Iron and cast iron objects can rust and stain other items. Copper, pewter and brass tend to stain.

Woodware

Wooden items are generally sensitive to heat and water. Regular use in the dishwasher may cause deterioration over time. If in doubt, wash by hand.

Glassware

Most everyday glassware is dishwasher safe. Crystal, very fine and antique glassware may etch that is, become opaque. You may prefer to wash these items by hand.

Plastic

Some plastic may change shape or colour with hot water. Check manufacturer’s instructions about washing plastic items. Washable plastic items should be weighed down so they do not flip over and fill with water or fall through the base rack during the wash. Use the multi-purposeclip (supplied with some models only) to hold plastic items in place.

Decorated items

Most modern china patterns are dishwasher safe. Antique items, those with a pattern painted over the glaze, gold rims or hand painted china may be more sensitive to machine washing. If in doubt, wash by hand.

Glued items

Certain adhesives are softened or dissolved in machine washing. If in doubt, wash by hand.

8 Racking features

Cutlery basket

To reduce the risk of injury, we recommend loading knives and sharp utensils with handles facing up.

Mix spoons, knives and forks within each section to stop cutlery nesting together and to ensure the water circulates freely.

Keep stainless steel from touching silver cutlery to avoid staining.

Removable small items container

Small, light items like baby bottle teats are best placed into the small items container to prevent them from being displaced during the wash.

You can extend your cutlery basket by clipping the container on its side.

Cutlery baskets will vary depending on model.

Racking features 9

Removable small items container

To optimise the cutlery space within the basket, the small items container can be placed elsewhere on the base rack. If laid flat, make sure the solid plastic side is facing up.

If you place a fully laden small items container under the adjustable racks, it is best to leave the rack space directly above the container empty: there may not be enough water reaching items that are placed there.

Removable tablet tray

If you are using dishwasher tablets, place them on the removable tablet tray, as shown. See also ‘Adding detergent’ for more information.

Important!

Dishwasher tablets should not be in direct contact with dishes or cutlery.

10 Racking features

Racking features will vary depending on model.

Stemware notches

These notches help support long-stemmedglassware.

Glass supports

These clip on the rack wires to give your tall glasses extra stability.

Spacing-adjustabletines

(DD24/DD60 models only)

Designed to fit deep bowls (wide spacing) or small plates (narrow spacing), depending on adjustment.

To adjust between wide and narrow spacings, slide the tines backward or forward by the handle at the front.

Cup rack with folding support wire

(DD36/DD90 models only)

Fold the wire up to support tall glasses.

Racking features 11

Adjustable racks

You can adjust these independently of each other to any height:

1Fold up to unlock the rack.

2Adjust the height to suit by sliding up or down.

3Fold down to lock in position.

Fold the racks away if you need the space.

Knife clip

This clips onto the adjustable racks and supports knives and other utensils during the wash.

Always ensure that knife blades are facing down.

Multi-purposeclip

(DD36/DD90 models only)

This keeps flimsy items (eg plastic lids and bottles) or large platters

and plates stable, so they cannot be dislodged during the wash.Slide the item between theprongs of the clip.

Folding tines

For optimum stability, place larger plates between the longer tines in the front.

Release and fold the tine sections down towards each other if you need the space for pots or other large items.

12 Loading suggestions

When loading your drawer, make sure that

you place items so that water coming from the rotating spray arms below can reach all areas (wash performance will be reduced if it can’t)

nothing blocks the water from getting to items on the adjustable racks

glass and other fragile items are stable, so that they do not accidentally topple and break during the wash.

How NOT to load your drawer

Overcrowded and wash water will not reach some of the dinnerware.

Cups, glasses and bowls must have their openings facing down.

Ensure dishware items are not forced into or protrude out of the drawer, as this may prevent the internal lid of the drawer from properly sealing which could result in a service call.

Locate sharp items safely to prevent injuring the user and damaging the lid assembly. Check the bottom of the cutlery basket to ensure sharp or pointed items have not come through as they may stop spray arm rotation.

The plates are nesting together and wash water may not get through.

Ensure cutlery are not nesting or stuck together. They need to be evenly spread out.

Ensure cutlery has not fallen through the base rack and stopped the spray arms from rotating.

The large bowl is blocking wash water reaching the adjustable racks.

Large utensils should be on the adjustable racks so they do not become dislodged and stop the spray arms from rotating.

Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury.

Water hardness and dishwashing 13

What is water hardness?

Hard water is water with a high concentration of minerals such as calcium and magnesium. In soft water, this concentration is low. Water hardness varies by geographical location.

How does water hardness affect dishwashing?

Hard water can be detrimental to the performance of your dishwasher. Over time, glassware washed in hard water will become opaque and dishes will become spotted or covered in a white film. Using very hard water can cause dishwasher parts to fail over time.

Naturally soft or softened water has no detrimental effects if used with the correct amount of detergent. However, excess detergent combined with hot, soft water may cause irreversible etching on glassware. Etching first appears as a rainbow-colouredfilmand—ifallowed tocontinue—canmake glassware permanently opaque.

What can I do to minimise any detrimental effects?

Contact your local water company to find out about water hardness in your area.

If your home has hard water and your dishwasher has no built-inwater softener…

Follow the detergent quantity recommendations on the following pages.

If available, use a detergent with high phosphate content. Phosphate softens the water and this improves wash results. If detergent with phosphate is not available, we recommend using multipurpose tablets.

Use rinse aid. We recommend you turn the rinse aid setting to 5 to help improve wash performance.

Use a dishwasher cleaner/descaler regularly, or whenever you notice a build-upof limescale deposits in your dishwasher.

Important!

We recommend fitting a water softener to the household water supply. If the water hardness in your home is above 250 ppm/14.6 gpg, a water softener has to be fitted to maintain the performance of your dishwasher.

If your home has naturally soft or softened water…

Avoid using too much detergent. Follow the quantity recommendations on the following pages. Ensure the drawer is not overloaded and water can reach all the dishes.

14 Wash programs and detergent quantities

DD24/DD60 models

Find out about water hardness in your home, then use the table below to determine how much detergent to use for each wash program. See also section ‘Water hardness and dishwashing’. For information on which program to use for your load, see your ‘Quick start guide’.

The detergent dispenser has markings to help you measure the correct quantities. See following section ‘Adding detergent’.

 

Water hardness

Wash programs

Detergent quantities (per drawer)

 

 

 

 

 

 

 

 

 

 

parts per million (ppm)

 

US CA

NZ AU

GB IE

 

 

detergent

grams

grams

 

grains per gallon (gpg)

 

 

 

dispenser

 

 

SOFTER

 

 

marking

 

 

<100 ppm or

Heavy

2/3

25

25

 

 

< 6 gpg*

Normal

2/3

25

25

 

 

 

 

Fast

1/3

10

10

 

 

Delicate

1/3

10

10

 

 

Rinse

-

-

-

 

100 -150ppm or

Heavy

full

30

 

 

6 - 9 gpg

Normal

full

30

 

 

 

 

 

 

Fast

full

25

 

 

 

Delicate

full

30

 

 

 

Rinse

-

-

 

 

>150 ppm or

Heavy

full

30

 

 

>9 gpg

Normal

full

30

 

 

 

 

 

 

Fast

full

30

 

HARDER

Delicate

full

30

 

Rinse

-

-

 

 

 

 

*If you have a a household water softener installed or your dishwasher has a built-inwater softener, use the quantities recommended for water with a hardness under 100 ppm/6 gpg, irrespective of the water hardness in your area. See also section ‘Water softener’.

Wash programs and detergent quantities 15

DD36/DD90 models

Find out about water hardness in your home, then use the table below to determine how much detergent to use for each wash program. See also section ‘Water hardness and dishwashing’. For information on which program to use for your load, see your ‘Quick start guide’.

The detergent dispenser has markings to help you measure the correct quantities. See following section ‘Adding detergent’.

 

Water hardness

Wash programs

Detergent quantities

 

 

 

 

 

 

 

 

 

 

 

 

 

parts per million (ppm)

 

US CA

NZ AU

 

GB IE

 

 

detergent

grams

 

grams

 

grains per gallon (gpg)

 

 

 

 

dispenser

 

 

 

SOFTER

 

 

marking

 

 

 

<100 ppm or

Heavy

full

30

 

30

 

 

 

< 6 gpg*

Normal

full

25

 

25

 

 

 

 

 

Fast

2/3

15

 

15

 

 

Delicate

2/3

15

 

15

 

 

Rinse

-

-

 

-

 

100 -150ppm or

Heavy

full

30

 

 

 

6 - 9 gpg

Normal

full

30

 

 

 

 

 

 

 

 

Fast

2/3

20

 

 

 

 

Delicate

full

30

 

 

 

 

Rinse

-

-

 

 

 

>150 ppm or

Heavy

full

30

 

 

 

>9 gpg

Normal

full

30

 

 

 

 

 

 

 

 

Fast

full

30

 

 

HARDER

Delicate

full

30

 

 

Rinse

-

-

 

 

 

 

 

 

 

 

 

 

 

 

 

*If you have a a household water softener installed or your dishwasher has a built-inwater softener, use the quantities recommended for water with a hardness under 100 ppm/6 gpg, irrespective of the water hardness in your area. See also section ‘Water softener’.

16 Adding detergent

Suitable detergents and where to place them

Note: You may see other, equally suitable types of dishwasher detergent on the shelves of your supermarket. Read and follow the detergent manufacturer’s recommendations.

Powdered dishwasher detergent

pour into detergent dispenser

Pouch packs of gel or powder place in detergent dispenser, but only if pack fits easily around prongs (pack must not be pierced)

OR

place on tablet tray in cutlery basket

Solid dishwasher tablets place on tablet tray in cutlery basket

Tablet tray

Latch

Detergent dispenser

Filling the detergent dispenser

1 Press the latch down to open the dispenser.

2Check that the dispenser is empty and dry, then add detergent (do not place solid tablets in the dispenser). No detergent is needed for the Rinse program.

3Close the dispenser until it clicks shut. The detergent will automatically be released into the drawer during the wash program.

If the cutlery basket is not used for a particular load, place tablet or pouch pack in the bottom of the drawer.

Adding detergent 17

Unsuitable detergents

These types of detergent are not suitable and may damage your dishwasher or lead to a service call that is not covered by warranty.

Important!

Do not use these in your dishwasher!

Liquid detergents

Laundry detergents

Hand washing liquids

Soaps

Disinfectants

How much detergent to use

For powdered detergent, refer to previous section ‘Wash programs and detergent quantities’ and follow the quantities relevant to your location and water hardness level. Use the markings to help you measure the correct quantities. For other types of detergent, follow the manufacturer’s recommendations.

Full (30 grams)2/3 (20 grams) 1/3 (10 grams)

Notes on using tablets

If you are using tablets, follow manufacturer instructions on the packet. Some tablets may not be suitable for all wash programs.

Using tablets could improve wash performance in hard water areas. Make sure that tablets never get in direct contact with dishes or cutlery.

If you are using dishwasher tablets with a built-inrinse aid component, you may need to reduce the rinse aid setting. See your ‘Quick start guide’ for instructions.

Important!

Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children and infirm persons away from the dishwasher when it is open. Check that the detergent dispenser is empty after completion of the wash program.

18 Using rinse aid

We recommend using liquid rinse aid regularly to give the best drying results.

Rinse aid gives a streak-free,sparkling clean look to glass and chinaware. It also prevents metal from tarnishing.

The rinse aid dispenser is on the inside of the drawer, underneath the detergent dispenser. It holds approximately 1.7 fl oz / 50 ml of rinse aid.

You may hear some unusual, high-pitchedbeeping when rinse aid is being dispensed. This is normal.

When to refill rinse aid

 

 

Indicator

 

If the indicator glows bright red, refill rinse aid.

light

 

 

 

 

If the indicator glows dimly or not at all, you do not need to refill:

Plug

 

 

there is enough rinse aid for the wash.

 

 

 

 

Note: Lighter coloured rinse aids will not dim the

 

Turn the plug

 

 

anticlockwise.

 

indicator as effectively as darker ones.

 

 

 

 

 

How to refill rinse aid

1Turn the plug anticlockwise and remove.

2Pour rinse aid into the circular opening, taking care not to spill any into the drawer.

Important!

Any accidental spillages of rinse aid must be wiped up. If not wiped up, spilt rinse aid will cause excessive foaming, resulting in a service

call that will not be covered by warranty.

3Refit the plug, then turn it clockwise back to its original position.

Important!

Make sure that the plug is closed tight, with its hand grip pointing straight ahead.

How much rinse aid to use

You may need to adjust the amount of rinse aid dispensed in each wash to suit your water conditions. The lowest setting is ‘1’, the highest is ‘5’. See the ‘Preference options’ section of your ‘Quick start guide’ for instructions on how to change the rinse aid setting.

If there is excessive foam at the end of the wash, reduce the setting. If dishes are wet or streaky after drying, increase the setting.

If you live in a hard water area and you have no water softener installed in your water supply or built into your dishwasher, we recommend adjusting the rinse aid setting to 5.

Remove the plug

Pour rinse aid into the circular opening

Refit the plug by turning it clockwise. Ensure it is closed tight.

Water softener 19

Setting up the water softener

Important!

Only some models (those with a letter ‘H’ in the model name) have a built-inwater softener. Models with water softener are not currently available in New Zealand and Australia.

Determine the water hardness in your local area

Your local water company will be able to provide you with information. Identify the setting you require for your dishwasher from the water hardness table below. For example, if your water hardness is 500ppm, then the water softener setting on your dishwasher should be 4. Refer to the ‘Preference options’ section of your ‘Quick start guide’ for instructions on adjusting the water softener setting.

Dishwasher

Parts per

Grains per

odH

 

ofH

oe /oClark

mmol/l

setting

million

gallon (gpg)

 

 

 

 

 

 

 

(ppm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

0 - 100

0

- 6

0 - 5.6

0 - 10

0

- 7

0 - 0.1

1

100 - 250

6

- 14

5.6 - 14

10 - 25

7

- 17.5

0.1 - 2.5

2

250 - 350

14 - 20

14 - 19.6

25 - 35

17.5 - 24.5

2.5 - 3.5

3

350 - 450

20 - 26

19.6

- 25.2

35 - 45

24.5 - 31.5

3.5 - 4.5

4

450 - 550

26 - 32

25.2

- 30.8

45 - 55

31.5 - 38.5

4.5 - 5.5

5

550 - 625

32 - 36

30.8

- 35

55 - 62

38.5 - 43.8

5.5 - 6.2

 

 

 

 

 

 

 

 

 

 

20 Water softener

Notes:

If your water hardness is above 625ppm/36 gpg, we highly recommend you completely fill the detergent dispenser for all programs except Rinse and the rinse aid setting should be at 5. If your water hardness is above 625ppm/36 gpg, the wash performance of your dishwasher will decline. You may hear some unusual noises when the water softener is in operation, this is normal.

How to fill the salt reservoir

1Open the drawer(s).

2Unscrew the salt reservoir cap by turning anticlockwise.

3Place the salt into the salt container and pour the contents into the salt reservoir. The salt reservoir can hold up to approximately 1 lb/0.5 kg of salt.

4Fit the cap tightly back into its original position.

5If you do not wash your dishes immediately after filling the salt reservoir, run a Rinse program to remove any salt water or spilt granules.

Note:

When filling the salt reservoir, you may notice water being displaced from the water softener overflow.

Salt reservoir

Salt container

Water softener 21

Important!

The water softener must always be filled with granular salt made especially for dishwasher water softening systems. We do not recommend the use of cooking salt like table salt, rock salt or pellets as they may contain impurities that will impair or diminish the life of the water softener.

The salt reservoir

b

Water softening can only take place when there is salt in the reservoir. The salt reservoir must be filled prior to using the dishwasher and whenever the salt indicator light is red.

Salt indicator light

If the salt indicator light is red, the salt reservoir is empty.

If the salt indicator light is black, there is enough salt in the reservoir for the wash program that has been selected. Classic models only: The electronic display will

also indicate when the salt reservoir is empty by displaying the salt symbol.

a

a Salt indicator light

bSalt reservoir cap

Important!

Do not pour detergent or rinse aid into the salt

 

reservoir. Detergent and rinse aid will destroy

Salt only

the water softener.

NO Detergent

NO Rinse Aid

22 User maintenance instructions -DD24/DD60 models

Important!

Disconnect the dishwasher from the power supply (unplug or switch off at the circuit breaker) and allow all its parts to cool before any cleaning or maintenance.

Holiday time

If the dishwasher is not going to be used for some time, we recommend you leave it clean and empty. Leave the drawer(s) ajar to allow air to circulate. Turn off both the power and water supply to the dishwasher.

When using your dishwasher for the first time after a long period away, we recommend pouring 3 cups of water into the drawer before loading and starting a wash. This is to lubricate components that may have dried out during non-use.

Cleaning the surfaces

1 Wipe with a clean damp cloth. Take care not to wet the control panel.

2Dry with a clean lint-freecloth.

Important!

We do not recommend the use of the following cleaning aids on your dishwasher as they may damage the surfaces:

Plastic or stainless steel scouring pads

Abrasive, solvent, household cleaners

Acid or alkaline cleaners

Hand washing liquids or soap

Stainless steel cleaners or polishes

Laundry detergents or disinfectants

Cleaning the drain filter, spray arm and filter plate

We recommend that the drain filter is cleaned whenever there is evidence of food particles. The spray arm may need cleaning about once a month in normal use or more often should the need arise.

The filter plate should not normally need cleaning. Food particles remaining on its surface can be wiped off with a clean, damp cloth.

Spray arm

Filter plate

Drain filter

User maintenance instructions - DD24/DD60 models

23

 

Important !

If a dishwasher cleaner/descaler is used, you must run a wash program with detergent immediately afterward to prevent any damage to your dishwasher.

The dishwasher must be used with the filter plate, drain filter and spray arm correctly in place.

Cleaning the drain filter

1Unplug the dishwasher or turn it off at the power supply.

2To access the drain filter, lift up the plastic grid above it, as shown.

3Lift and remove the drain filter. It is normal to find some water under it.

4Empty, rinse clean under running water and replace back into the allocated space.

5 Ensure the drain filter is flush with the filter plate , then lower the plastic grid back into place.

6Plug the dishwasher back in or turn it on at the power supply.

24 User maintenance instructions -DD24/DD60 models

 

Cleaning the spray arm and filter plate

 

 

To remove and clean the spray arm and filter plate

 

1

Unplug the dishwasher or turn it off at the power

2

 

supply.

 

 

2

Unclip the glass supports (if fitted) from the rack

 

 

wires and fold all the adjustable racks away, so

 

 

that they are upright and close to the top.

 

3

Remove the base rack carefully. Lift from the back

 

 

end first to prevent knocking the detergent and

 

 

rinse aid dispenser.

 

4Lift the spray arm and shake any foreign material out.

Rinse it clean under running water and wipe with a damp cloth.

5Lift and remove the drain filter.

1

3

4

5

6In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8

turn. This will release the filter plate.

7Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge of the filter plate.

6

7

Turn outer ring 1/8 turn

 

User maintenance instructions - DD24/DD60 models

25

 

To replace the filter plate and spray arm

 

 

8

Before replacing the filter

 

 

 

plate, ensure the O-ringis correctly

O-ring

 

 

positioned on the base, as shown.

 

 

 

 

9

Orientate the filter plate and lower it into place:

 

 

 

make sure its kidney-shapedhole aligns with

 

 

 

the matching recess in the dishwasher base.

 

 

10

Ensure the filter plate lies flat in the base, then

 

 

 

lock it into position: turn the outer ring clockwise

 

 

 

until the the marks align with each other and all three pin pairs firmly interlock, as shown.

 

Important!

The filter plate must not be able to move about freely.

Alignment marks

10

 

9

Inter-

locking

pin

Outer ring

11Replace the drain filter, ensuring it is flush with the filter plate.

12Replace the spray arm back onto the impeller.

1211

13Replace the base rack, lowering its front edge into position first.

14Plug the dishwasher back in or turn it on at the power supply.

Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to prevent damage to the dishwasher.

26 User maintenance instructions -DD36/DD90 models

Important!

Disconnect the dishwasher from the power supply (unplug or switch off at the circuit breaker) and allow all its parts to cool before any cleaning or maintenance.

Holiday time

If the dishwasher is not going to be used for some time, we recommend you leave it clean and empty. Leave the drawer ajar to allow air to circulate. Turn off both the power and water supply to the dishwasher.

When using your dishwasher for the first time after a long period away, we recommend pouring 3 cups of water into the drawer before loading and starting a wash. This is to lubricate components that may have dried out during non-use.

Cleaning the surfaces

1 Wipe with a clean damp cloth. Take care not to wet the control panel.

2Dry with a clean lint-freecloth.

Important!

We do not recommend the use of the following cleaning aids on your dishwasher as they may damage the surfaces:

 

Plastic or stainless steel scouring pads

 

Abrasive, solvent, household cleaners

 

Acid or alkaline cleaners

 

Hand washing liquids or soap

 

Stainless steel cleaners or polishes

 

Laundry detergents or disinfectants

Cleaning the drain filter, spray arm and filter plate

We recommend that the drain filter is cleaned whenever there is evidence of food particles. The spray arm may need cleaning about once a month in normal use or more often should the need arise.

The filter plate should not normally need cleaning. Food particles remaining on its surface can

be wiped off with a clean, damp cloth.

Wash pump housing

Spray arm

Filter

Drain filter

plate

User maintenance instructions - DD36/DD90 models

27

 

Important !

If a dishwasher cleaner/descaler is used, you must run a wash program with detergent immediately afterward to prevent any damage to your dishwasher.

The dishwasher must be used with the filter plate, drain filter and spray arms correctly in place.

Cleaning the drain filter

1Unplug the dishwasher or turn it off at the power supply.

2Ensure the tines above the drain filter are in the upright position.

3Lift and remove the drain filter. It is normal to find some water under it.

4 Empty, rinse clean under running water and replace back into the allocated space.

5Ensure the drain filter is flush with the filter plate.

6Plug the dishwasher back in or turn it on at the power supply.

28 User maintenance instructions -DD36/DD90 models

Cleaning the spray arms and filter plate

Ensure the dishwasher is cool before you start cleaning.

To remove the base rack and spray arms

1 Unplug the dishwasher or turn it off at the power supply.

2Take out the cutlery basket.

3Unclip the glass supports (if fitted) from the rack wires and fold all the adjustable racks away, so that they are upright and close to the top.

4Fold down all the tines.

5Remove the base rack carefully. Start lifting from the back first, tilting the rack as needed to clear the adjustable racks and the dispenser in the front.

6 Unclip the spray arms off their mounting valves and shake any foreign material out.

7Rinse the spray arm clean under running water and wipe with a damp cloth.

8If necessary, wipe any soiling off the filter plate with a clean, damp cloth.

Spray arm

Mounting valve

Wash pump housing

Filter plate

User maintenance instructions - DD36/DD90 models 29

To replace the spray arms and base rack

9Clip the spray arms back onto their mounting valves. Be careful that you don’t force them too hard and apply too much pressure on the wash pump housing. You should hear them click into

place. Rotate them with your hand to check that they are located properly.

10Replace the base rack, lowering its front edge into position first.

11Clip the glass supports back on and arrange the racking back to your preference.

12Plug the dishwasher back in or turn it on at the power supply.

Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to prevent damage to the dishwasher.

30 Troubleshooting

Problem

Possible cause

What to do

Unclean dishes

Wash program unsuitable

See your ‘Quick start guide’ for a suitable

 

for the load.

wash program, or the soils were too heavily

 

 

baked on and dishes may need soaking.

 

Spray arm unable to rotate.

Ensure no items are obstructing the spray

 

 

arm path.

 

Drawer overloaded/

Refer to the section on loading.

 

incorrectly loaded.

 

 

Filter plate/drain filter is

See section ‘User maintenance instructions’.

 

incorrectly inserted.

 

 

Detergent put in the

Detergent must be placed in the large

 

wrong compartment of the

compartment. See section ‘Adding detergent’

 

dispenser.

for information.

 

Excess food not removed

Scrape all food scraps off dinnerware prior to

 

from dinnerware prior to

loading.

 

loading.

 

 

Unsuitable detergent.

Use detergents suitable for automatic

 

 

dishwashers. See section ‘Adding detergent’

 

 

for examples of suitable and unsuitable

 

 

detergents.

 

Not enough detergent.

See section ‘Wash programs and detergent

 

 

quantities’ or follow the detergent

 

 

manufacturer’s instructions.

 

Spray arm holes are blocked.

Clean the spray arm.

 

 

 

 

Filter plate/drain filter is

Clean the filter plate and drain filter.

 

blocked.

 

Foaming

Incorrect amount of

See section ‘Wash programs and detergent

 

detergent.

quantities’ or follow the detergent

 

 

manufacturer’s instructions.

 

Too much egg in the wash

Increase the amount of detergent.

 

load.

 

 

Rinse aid setting too high.

Decrease the rinse aid setting.

Rinse aid dispenser plug not closed properly.

Ensure that the rinse aid dispenser plug is closed tight, with its hand grip pointing straight ahead. See section ‘Using rinse aid’.

Water leaking

Drain hose disconnected

Reconnect the drain hose to the waste pipe.

 

from waste pipe.

 

 

Water inlet hose not

Ensure the inlet hose is connected securely.

 

properly connected.

 

 

Other leaks.

Turn water and power supplies to the

 

 

dishwasher off. Call Customer Care or your

 

 

Authorised Service Centre. See your ‘Service

 

 

and warranty’ booklet for contact details.

Rinse aid dispenser plug not closed properly.

Ensure that the rinse aid dispenser plug is closed tight, with its hand grip pointing straight ahead. See section ‘Using rinse aid’.

 

 

Troubleshooting

31

 

 

 

 

 

 

Problem

Possible cause

What to do

 

 

 

 

 

 

 

Drawer will not

Childlock feature is on or

Turn the Childlock off. Hold down the

 

/

 

open (no beeping,

the ‘Closed drawer autolock’

button until the symbol disappears

from

 

 

 

 

no wash underway)

option is on, or both.

the display or the light above the

 

/

 

 

 

 

 

 

 

button goes out and/or press the

/

 

 

 

 

 

 

 

button to open the drawer.

 

 

 

 

 

 

 

 

Power failure

Power outage in your home

Wait until power resumes, cycle

will restart in

 

during cycle

or area.

same part of wash program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Continuous

A fault has occurred.

Refer to section ‘If there is a fault’.

 

 

 

 

 

 

 

beeping

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Intermittent

Dishwasher is in pause

Close the dishwasher and press the

 

 

 

 

 

 

 

beeping

mode.

 

 

 

 

 

 

 

button to resume the program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High-pitched,

Rinse aid is being

This is normal and needs no action.

 

 

 

 

 

 

 

 

subtle beeping

dispensed.

 

 

 

 

 

 

 

 

 

 

during a wash

 

 

 

 

 

 

 

 

 

 

 

program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control buttons

Water over control buttons.

Wipe the area dry.

 

 

 

 

 

 

 

inside the drawer

 

 

 

 

 

 

 

 

 

 

 

do not respond to

 

 

 

 

 

 

 

 

 

 

 

touch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dishwasher will not

Power supply is not

Connect the power supply.

 

 

 

 

 

 

 

start

connected.

 

 

 

 

 

 

 

 

 

 

The drawer is not closed properly.

Ensure the drawer is firmly closed.

 

 

Models with three buttons

Turn the Keylock or Childlock off. Hold

 

 

down the

/

button until the symbol

 

 

on the front only: Keylock or

 

 

Childlock feature is on.

disappears from the display or the light

 

 

above the

/

 

button goes out.

 

 

 

 

 

 

 

 

 

 

 

 

 

button not pressed.

Press the

button.

 

 

 

 

 

 

 

 

 

 

Fan noise

 

This is normal. The drying

No action required. The fan will automatically

coming from the

 

fan continues to run for a

stop after the set time is over, or when the

dishwasher after a

 

set period of time after a

drawer is opened. In some cases, the fan may

wash program has

 

program has finished to

resume when the drawer is closed again.

finished

 

assist with drying.

 

 

 

 

 

 

Fan noise starts

This is normal. In some

up when I close

cases, the drying fan will

the drawer, even

run whenever the drawer is

though I didn’t start

closed for a set period of

a new wash

time after a program has

 

finished.

No action required. The fan will automatically stop after the set time is over.

32 Troubleshooting

Problem

Possible Cause

What to do

The wash program

The wash program is still

No action required. The program will

seems to have

underway. It is in a ‘quiet’

transition into a more audible phase after the

finished (the

phase that is needed for

‘quiet’ phase is over.

dishwasher is idle),

ensuring the best wash

 

but the end of

results.

 

wash beeps haven’t

 

 

sounded and the

 

 

drawer cannot be

 

 

opened

 

 

Water pooling on

This is normal condensation.

If there is any water over the control buttons,

inner rim of drawer

 

wipe dry.

after a wash

 

 

Water under the

This is normal and needs no action.

drain filter

 

 

Excess water in the

Drain hose(s) bent or

Straighten the drain hose(s).

drawer

kinked.

 

 

Blocked filters.

Clean the filter plate/drain filter. Refer to

 

 

’User maintenance instructions’.

Water marks on the

Rinse aid depleted.

Refill the rinse aid dispenser.

dishes

 

 

Rinse aid setting too low.

Increase the rinse aid setting.

 

 

 

 

 

Dishwasher overloaded/

Refer to the section on loading.

 

incorrectly loaded.

 

Drawer interior is

Some foods, like tomato

Pre-rinsedishes before placing in the drawer.

stained

based products, may stain

Alternatively, using the Rinse program after

 

the inside of the drawer.

adding the dishes may minimise staining.

Dishes did not dry

Incorrect loading.

Ensure the dishes are not nesting together.

 

 

 

 

Dishes were left in the

We recommend unloading the dishes within

 

drawer for several hours

a few hours after a wash program has

 

after a wash.

finished, as the small amount of vapour left

 

 

after the wash may -withtimeresettle on

 

 

dishes as condensation. Using rinse aid or

 

 

increasing its setting may also help reduce

 

 

this problem.

 

Rinse aid depleted.

Refill the rinse aid dispenser.

 

 

 

 

Rinse aid setting too low.

Increase the rinse aid setting.

 

 

 

 

Eco wash program used.

Choose a standard wash program.

No detergent

Detergent dispenser was

Clean the dispenser and ensure it is dry

dispensed

wet when loaded.

before adding detergent.

Excessive motor

The filter plate and/or spray

Refer to the ‘User maintenance instructions’

noise

arm is incorrectly placed.

section for details on correct placement.

 

No water in the motor area.

This usually occurs on the first use or when

 

 

the dishwasher has not been used for long

 

 

periods of time. Pour 3 cups of water into

 

 

the drawer before running a wash program.

If there is a fault 33

How do I know if there is a fault?

Your dishwasher will self diagnose and let you know by beeping continuously and showing a fault code on the wash program panel inside the drawer (all models) and in the display (Classic models only) .

What should I do if there is a fault?

Check what kind of model you have and attend to the fault by following the appropriate flowchart following. You may be able to fix some of the faults yourself – with others, you will need to contact Fisher & Paykel Customer Care to organise a visit by a service technician.

Classic models

Go to Page 34

Designer models

Go to Page 36

Integrated models with badge

Go to Page 38

Integrated models with remote control

Go to Page 40

34 How to attend to a fault Classic models

START HERE

Press to stop the beeping.

Look up the fault code in the table opposite and note it down.

If it’s a ‘U’ code

 

If it’s an ‘E’ code

 

 

 

U1: Turn on the water supply,then pressto resume the wash

program.

U4: Attend to the fault on the other drawer. The drawer displaying U4 is not faulty.

U6: Open the drawer and check thespray arm.

Has the spray arm loosened or come off its mounting?

YES

Refit the spray arm following

instructions in section ‘User maintenance instructions’, then close the drawer and pressto resume the wash program.

NO

Water pressure is too low. You

may need to have a ‘4 litre’ valve installed on your water supply.

Press . Wait a few seconds, then pressagain.

Has the fault code disappeared?

YES

The fault has reset. You can

NO continue to use your dishwasher.

Press. Another number will briefly appear in the display. Note this number down too. It will help Fisher & Paykel Customer Care identify the fault more precisely.

Has the fault code disappeared? Has the dishwasher resumed normal operation?

YES

You have corrected the fault and can continue to use your dishwasher as normal.

NO Disconnect the dishwasher from the power supply (unplug or switch off at circuit breaker), turn off its water supply,then contact Customer Care with the fault code information. See your ‘Service and warranty’ booklet for contact details.

How to attend to a fault Classic models 35

Display

U1

U4

U6

Display

E1

E2

E3

E4

E5

E6

E7

E8

E9

EC

Fault Code

Possible cause of fault

U1

No water – the water supply hasn’t been

 

turned on.

U4

Fault in the other drawer preventing the

 

use of this drawer.

U6

The spray arm has loosened or come off

 

its mounting, or water pressure is too

 

low.

Fault Code

Possible cause of fault

E1

Flood detected.

E2

Motor fault.

E3

Temperature sensor fault. You may need

 

to have a tempering valve installed

 

on your water supply, to ensure that

 

incoming water is less than 65oC (149oF).

E4

Heating element failed.

E5

Fault with the internal lid of the

 

dishwasher.

E6

Fault with the drying fan.

E7

Electronics fault—detergentdispensing

 

system.

E8

Electronics fault—othersystems.

E9

Electronics fault—controller.

EC

Electronics fault—communication

 

between drawers.

36 How to attend to a fault Designer models

START HERE

Press to stop the beeping.

Try to open the drawer (without using excessive force).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Can the drawer be opened?

 

 

NO

 

 

 

 

 

 

 

Press

 

. Wait a few

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seconds,

then press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check which program indicators

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is

the light above the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

are lit on the wash program panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Look up what fault code the

 

 

 

 

 

 

 

 

button still red?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicators correspond to in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

table opposite.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note down the code here:

 

 

 

 

 

 

If it’s an ‘E’ code

NO,

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IT’S

 

 

 

 

 

 

 

 

If it’s a ‘U’ code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLUE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The fault

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U1: Turn on the water supply,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

has reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press . Wait a few

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

then press

to resume the wash

 

 

 

 

 

 

 

 

sec

onds,

then press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

should

 

 

 

 

 

 

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

now be able

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to open the

 

 

 

 

 

 

U4: Attend to the fault on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

drawer.

 

 

 

 

 

 

 

the other drawer. The drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is

 

 

 

 

above the

 

 

You can

 

 

 

 

 

 

 

displaying U4 is not faulty.

 

 

 

 

 

the light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button still red?

 

 

 

 

 

 

 

 

 

 

continue to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

use it as

 

 

 

 

 

 

 

U6: Open the drawer and check the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal.

 

 

 

 

 

 

 

spray arm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO, IT’S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLUE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press . The Eco indicator and another set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the spray arm loosened or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

of program indicators will briefly

light up on

 

 

 

 

 

 

come off its mounting?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the wash program panel. Mark which ones

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in the diagram below. This information will

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

help Fisher & Paykel identify the fault more

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refit the spray arm

 

 

 

 

Water pressure

 

 

 

 

precisely. Which other indicators light up

 

 

 

 

 

following instructions

 

 

 

 

when you press

?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is too low. You

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in section ‘User

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may need to have

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

maintenance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a ‘4 litre’ valve

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

instructions’, then close

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the drawer and press

 

installed on your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to resume the wash

 

water supply.

 

 

 

 

 

Disconnect the dishwasher from the

 

 

 

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power supply (unplug or switch off at

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the fault code disappeared?

 

 

 

circuit breaker), turn off its water supply,

 

 

 

 

 

 

 

 

 

Has the dishwasher resumed

NO

 

then contact Customer Care with the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal operation?

 

 

 

fault code information. See your ‘Service

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

and warranty’ booklet for contact details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You have corrected the fault and can continue to use your dishwasher as normal.

How to attend to a fault Designer models

37

Wash program panel

Fault Code

Possible cause of fault

 

 

U1

No water – the water supply hasn’t been

 

 

turned on.

 

 

U4

Fault in the other drawer preventing the

 

 

use of this drawer.

 

 

U6

The spray arm has loosened or come off

 

 

its mounting, or water pressure is too

 

 

 

low.

 

Wash program panel

Fault Code

Possible cause of fault

 

 

E1

Flood detected.

 

 

E2

Motor fault.

 

 

E3

Temperature sensor fault. You may need

 

 

to have a tempering valve installed

 

 

 

on your water supply, to ensure that

 

 

 

incoming water is less than 65oC (149oF).

 

E4

Heating element failed.

 

 

E5

Fault with the internal lid of the

 

 

 

dishwasher.

 

 

E6

Fault with the drying fan.

 

 

E7

Electronics fault—detergentdispensing

 

 

system.

 

 

E8

Electronics fault—othersystems.

 

 

E9

Electronics fault—controller.

 

 

EC

Electronics fault—communication

 

 

 

between drawers.

 

38 How to attend to a fault Integrated models with badge

START HERE

Press to stop the beeping.

Try to open the drawer (without using excessive force).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

Press

 

. Wait a few

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Can the drawer be opened?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seconds, then press

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check which program indicators

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the light above the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

are lit on the wash program panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Look up what fault code the

 

 

 

 

 

 

 

button still red?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicators correspond to in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

table opposite.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note down the code here:

 

 

 

 

 

 

If it’s an ‘E’ code

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IT’S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If it’s a ‘U’ code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GREEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The fault

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U1: Turn on the water supply,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

has reset

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press . Wait a few

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and you

 

 

 

 

 

 

then press

to resume the wash

 

 

 

 

 

 

 

 

seconds, then press

 

 

 

should

 

 

 

 

 

 

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

now be able

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

U4: Attend to the fault on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to open the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

drawer.

 

 

 

 

 

 

the other drawer. The drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the light above the

 

 

 

You can

 

 

 

 

 

 

displaying U4 is not faulty.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button still red?

 

 

 

 

 

 

 

 

 

 

continue to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

use it as

 

 

 

 

 

 

U6: Open the drawer and check the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal.

 

 

 

 

 

 

spray arm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO, IT’S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GREEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press . The Eco indicator and another set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the spray arm loosened or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

of program indicators will briefly

light up on

 

 

 

 

 

 

come off its mounting?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the wash program panel. Mark which ones

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in the diagram below. This information will

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

help Fisher & Paykel identify the fault more

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refit the spray arm

 

 

 

 

Water pressure

 

 

 

 

precisely. Which other indicators light up

 

 

 

 

following instructions

 

 

 

 

when you press

?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is too low. You

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in section ‘User

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may need to have

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

maintenance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a ‘4 litre’ valve

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

instructions’, then close

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the drawer and press

 

installed on your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to resume the wash

 

water supply.

 

 

 

 

 

Disconnect the dishwasher from the

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power supply (unplug or switch off at

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the fault code disappeared?

 

 

 

circuit breaker), turn off its water supply,

 

 

 

 

 

 

 

 

 

Has the dishwasher resumed

NO

 

then contact Customer Care with the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal operation?

 

 

 

fault code information. See your ‘Service

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

 

and warranty’ booklet for contact details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You have corrected the fault and can continue to use your dishwasher as normal.

How to attend to a fault Integrated models with badge

39

Wash program panel

Fault Code

Possible cause of fault

 

 

U1

No water – the water supply hasn’t been

 

 

turned on.

 

 

U4

Fault in the other drawer preventing the

 

 

use of this drawer.

 

 

U6

The spray arm has loosened or come off

 

 

its mounting, or water pressure is too

 

 

 

low.

 

Wash program panel

Fault Code

Possible cause of fault

 

 

E1

Flood detected.

 

 

E2

Motor fault.

 

 

E3

Temperature sensor fault. You may need

 

 

to have a tempering valve installed

 

 

 

on your water supply, to ensure that

 

 

 

incoming water is less than 65oC (149oF).

 

E4

Heating element failed.

 

 

E5

Fault with the internal lid of the

 

 

 

dishwasher.

 

 

E6

Fault with the drying fan.

 

 

E7

Electronics fault—detergentdispensing

 

 

system.

 

 

E8

Electronics fault—othersystems.

 

 

E9

Electronics fault—controller.

 

 

EC

Electronics fault—communication

 

 

 

between drawers.

 

40How to attend to a fault

Integrated models with remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

START HERE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Try to open the drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(without using excessive force).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disconnect the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NO

 

dishwasher from the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Can the drawer be opened?

 

 

 

power supply to stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the beeping, then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

contact Customer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

 

Care. See your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

‘Service and warranty’

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check which program indicators

 

 

 

 

 

booklet for contact

 

 

 

 

 

 

 

 

 

 

 

are lit on the wash program panel.

 

 

 

 

 

details.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If it’s a ‘U’ code

 

 

 

 

Look up what fault code the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicators correspond to in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

table opposite.

 

 

 

 

 

If it’s an ‘E’ code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press

on the wash

 

 

Note down the code here:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

program panel to stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the beeping, then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press and hold

until you

 

 

 

follow the applicable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hear a quick double beep.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

instructions below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do the fault code indicators

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and beeping come back in a

 

 

 

 

U1: Turn on the water supply,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

few seconds?

 

 

 

 

 

 

 

 

 

press

 

, then close the drawer to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

resume the wash program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You have corrected

 

 

 

U4: Attend to the fault on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the fault and can

 

 

 

the other drawer. The drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

continue to use

 

 

 

displaying U4 is not faulty.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

your dishwasher as

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal.

 

 

 

 

 

 

 

 

 

U6: Open the drawer and check the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

spray arm.

 

 

 

 

 

 

 

 

 

Press

 

on the wash program panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Eco indicator and another set of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

program indicators will briefly light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the spray arm loosened or

 

 

 

 

 

up. Mark which ones in the diagram

 

 

 

 

come off its mounting?

 

 

 

below. This information will help

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fisher & Paykel identify the fault more

 

 

 

 

 

YES

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

precisely. Which other indicators light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

up when you press

?

 

 

 

 

 

 

 

 

Refit the spray arm

 

Water pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

following instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is too low. You

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in section ‘User

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may need to have

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

maintenance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

instructions’, then close

 

a ‘4 litre’ valve

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the drawer and press

 

installed on your

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to resume the wash

 

water supply.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has the fault code disappeared?

Has the dishwasher resumed NO normal operation?

YES

You have corrected the fault and can continue to use your dishwasher as normal.

Disconnect the dishwasher from the power supply (unplug or switch off at circuit breaker), turn off its water supply, then contact Customer Care with the fault code information. See your ‘Service and warranty’ booklet for contact details.

 

 

How to attend to a fault

 

41

 

 

 

 

 

Integrated models with remote control

 

Wash program panel

Fault Code

Possible cause of fault

 

 

U1

No water – the water supply hasn’t been

 

 

turned on.

 

 

 

 

 

U4

Fault in the other drawer preventing the

 

 

use of this drawer.

 

 

 

 

 

U6

The spray arm has loosened or come off

 

 

its mounting, or water pressure is too

 

 

 

low.

 

 

 

 

 

Wash program panel

Fault Code

Possible cause of fault

 

 

 

 

 

 

E1

Flood detected.

 

 

 

 

 

 

E2

Motor fault.

 

 

 

 

 

E3

Temperature sensor fault. You may need

 

 

to have a tempering valve installed

 

 

 

on your water supply, to ensure that

 

 

 

incoming water is less than 65oC (149oF).

 

 

 

 

 

E4

Heating element failed.

 

 

 

 

 

 

E5

Fault with the internal lid of the

 

 

 

dishwasher.

 

 

 

 

 

 

E6

Fault with the drying fan.

 

 

 

 

 

E7

Electronics fault—detergentdispensing

 

 

system.

 

 

 

 

 

 

E8

Electronics fault—othersystems.

 

 

 

 

 

 

E9

Electronics fault—controller.

 

 

 

 

 

 

EC

Electronics fault—communication

 

 

 

between drawers.

 

 

 

 

 

 

42 Warranty and service

Before you call for service or assistance ...

Check the things you can do yourself. Refer to the ‘Installation instructions’, ‘User guide’ and ‘Quick start guide’ and check that:

1your product is correctly installed

2you are familiar with its normal operation.

If after checking these points you still need assistance, please see you ‘Service and warranty’ booklet for warranty information and Customer Care contact details, or contact us through our website listed on the back cover.

Fisher & Paykel Appliances

Model no

Serial no.

 

Copy this from the serial label of your dishwasher.

 

The label is located inside cabinet, underneath the

 

(top) drawer.

Date of purchase

 

Contact details

Dealer name

44 Wash program data -DD24/DD60 models

For information on which program to use for your load, see your ‘Quick start guide’.

Wash cycle times indicated are approximate.

USA & CANADA - Classic, Designer, and Integrated double models

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~127 mins)

(~128 mins)

(~53 mins)

(~82 mins)

(~11 mins)

 

 

 

 

 

 

pre-wash120oF

 

 

pre-wash

main wash 150oF

main wash 130oF

main wash 130oF

main wash 120oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 163oF

final rinse 130oF

final rinse 120oF

final rinse 130oF

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO

FAST ECO

DELICATE ECO

 

(~107 mins)

(~100 mins)

(~35 mins)

(~68 mins)

 

 

 

 

 

 

main wash 150oF

main wash 120oF

main wash 115oF

main wash 115oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 150oF

final rinse 125oF

final rinse 115oF

final rinse 120oF

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

USA & CANADA - Integrated single models

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~163 mins)

(~164 mins)

(~82 mins)

(~118 mins)

(~11 mins)

 

 

 

 

 

 

pre-wash120oF

 

 

pre-wash

main wash 150oF

main wash 130oF

main wash 130oF

main wash 120oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 135oF

final rinse 130oF

final rinse 120oF

final rinse 130oF

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO

FAST ECO

DELICATE ECO

 

(~158 mins)

(~133 mins)

(~62 mins)

(~99 mins)

 

 

 

 

 

 

main wash 150oF

main wash 120oF

main wash 115oF

main wash 115oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 135oF

final rinse 125oF

final rinse 115oF

final rinse 120oF

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

Wash program data- DD24/DD60 models

45

 

 

 

 

NEW ZEALAND & AUSTRALIA - Classic, Designer, and Integrated double models

 

HEAVY

NORMAL

FAST

DELICATE

RINSE

 

(~124 mins)

(~128 mins)

(~49 mins)

(~92 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

main wash 70oC

main wash 60oC

main wash 55oC

main wash 50oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 65oC

final rinse 60oC

final rinse 55oC

final rinse 60oC

 

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

 

(~120 mins)

(~149 mins)

(~33 mins)

(~80 mins)

 

 

 

 

 

 

 

 

main wash 65oC

main wash 40oC

main wash 45oC

main wash 45oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 55oC

final rinse 40oC

final rinse 45oC

final rinse 50oC

 

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

 

 

NEW ZEALAND & AUSTRALIA - Integrated single models

 

 

HEAVY

NORMAL

FAST

DELICATE

RINSE

 

(~170 mins)

(~174 mins)

(~83 mins)

(~128 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

main wash 70oC

main wash 60oC

main wash 55oC

main wash 50oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 57oC

final rinse 57oC

final rinse 55oC

final rinse 57oC

 

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

 

(~166 mins)

(~189 mins)

(~60 mins)

(~111 mins)

 

 

 

 

 

 

 

 

main wash 65oC

main wash 40oC

main wash 45oC

main wash 45oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 55oC

final rinse 40oC

final rinse 45oC

final rinse 50oC

 

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

 

*Reference program for energy label in compliance with AS/NZS 2007.

46 Wash program data -DD24/DD60 models

GREAT BRITAIN AND IRELAND

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~126 mins)

(~95 mins)

(~53 mins)

(~92 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

main wash 70oC

main wash 65oC

main wash 55oC

main wash 50oC

 

post-rinsex2

post-rinsex2

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 65oC

final rinse 65oC

final rinse 50oC

final rinse 60oC

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

(~121 mins)

(~159 mins)

(~39 mins)

(~87 mins)

 

 

 

 

 

 

main wash 60oC

main wash 50oC

main wash 45oC

main wash 45oC

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 55oC

final rinse 60oC

final rinse 45oC

final rinse 50oC

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

*Reference program for energy label in compliance with EN50242 Regulations.

Note:

Wash times can vary depending on the incoming water temperature, ambient conditions, type of dish load and whether the drawer has been opened during the wash. Wash times are only APPROXIMATE on the electronic display and based on 120oF (USA and Canada), 20oC (New Zealand and Australia), or 15oC (Great Britain and Ireland) incoming water.

47

48 Wash program data -DD36/DD90 models

For information on which program to use for your load, see your ‘Quick start guide’.

Wash cycle times indicated are approximate.

USA & CANADA - Designer models

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~141 mins)

(~148 mins)

(~58 mins)

(~85 mins)

(~9 mins)

 

 

 

 

 

 

pre-wash120oF

 

 

pre-wash

main wash 150oF

main wash 140oF

main wash 130oF

main wash 120oF

 

post-rinsex3

post-rinsex3

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 163oF

final rinse 150oF

final rinse 140oF

final rinse 130oF

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO

FAST ECO

DELICATE ECO

 

(~135 mins)

(~113 mins)

(~39 mins)

(~60 mins)

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

 

main wash 140oF

main wash 120oF

main wash 115oF

main wash 115oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 150oF

final rinse 150oF

final rinse 115oF

final rinse 120oF

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

USA & CANADA - Integrated models

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~179 mins)

(~186 mins)

(~94 mins)

(~122 mins)

(~9 mins)

 

 

 

 

 

 

pre-wash120oF

 

 

pre-wash

main wash 150oF

main wash 140oF

main wash 130oF

main wash 120oF

 

 

 

 

 

 

post-rinsex3

post-rinsex3

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 135oF

final rinse 135oF

final rinse 135oF

final rinse 130oF

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO

FAST ECO

DELICATE ECO

 

(~173 mins)

(~151 mins)

(~72 mins)

(~95 mins)

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

 

main wash 140oF

main wash 120oF

main wash 115oF

main wash 115oF

 

post-rinsex3

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 135oF

final rinse 135oF

final rinse 115oF

final rinse 120oF

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

Wash program data- DD36/DD90 models

49

 

 

 

 

 

 

NEW ZEALAND & AUSTRALIA - Designer models

 

 

 

HEAVY

NORMAL

FAST

DELICATE

RINSE

 

(~130 mins)

(~120 mins)

(~55 mins)

(~98 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

main wash 70oC

main wash 50oC

main wash 55oC

main wash 50oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 65oC

final rinse 60oC

final rinse 60oC

final rinse 60oC

 

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

 

(~129 mins)

(~146 mins)

(~45 mins)

(~91 mins)

 

 

 

 

 

 

 

 

main wash 60oC

main wash 42oC

main wash 45oC

main wash 45oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 55oC

final rinse 43oC

final rinse 45oC

final rinse 50oC

 

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

 

 

 

 

NEW ZEALAND & AUSTRALIA - Integrated models

 

 

 

HEAVY

NORMAL

FAST

DELICATE

RINSE

 

(~168 mins)

(~158 mins)

(~91 mins)

(~136 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

 

 

main wash 70oC

main wash 50oC

main wash 55oC

main wash 50oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 57oC

final rinse 57oC

final rinse 57oC

final rinse 57oC

 

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

 

(~166 mins)

(~177 mins)

(~78 mins)

(~126 mins)

 

 

 

 

 

 

 

 

main wash 60oC

main wash 42oC

main wash 45oC

main wash 45oC

 

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

 

 

final rinse 55oC

final rinse 43oC

final rinse 45oC

final rinse 50oC

 

 

drying phase

drying phase

drying phase

drying phase

 

 

 

 

 

 

 

 

*Reference program for energy label in compliance with AS/NZS 2007.

50 Wash program data -DD36/DD90 models

GREAT BRITAIN AND IRELAND

HEAVY

NORMAL

FAST

DELICATE

RINSE

(~126 mins)

(~95 mins)

(~60 mins)

(~99 mins)

(~11 mins)

 

 

 

 

 

 

 

 

 

pre-wash

 

 

 

 

 

main wash 70oC

main wash 65oC

main wash 55oC

main wash 50oC

 

post-rinsex2

post-rinsex2

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 65oC

final rinse 65oC

final rinse 60oC

final rinse 60oC

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

HEAVY ECO

NORMAL ECO*

FAST ECO

DELICATE ECO

 

(~121 mins)

(~179 mins)

(~42 mins)

(~92 mins)

 

 

 

 

 

 

main wash 60oC

main wash 50oC

main wash 45oC

main wash 45oC

 

post-rinsex2

post-rinse

post-rinse

post-rinsex2

 

 

 

 

 

 

final rinse 55oC

final rinse 55oC

final rinse 45oC

final rinse 50oC

 

drying phase

drying phase

 

drying phase

 

 

 

 

 

 

*Reference program for energy label in compliance with EN50242 Regulations.

Note:

Wash times can vary depending on the incoming water temperature, ambient conditions, type of dish load and whether the drawer has been opened during the wash. Wash times are only APPROXIMATE on the electronic display and based on 120oF (USA and Canada), 20oC (New Zealand and Australia), or 15oC (Great Britain and Ireland) incoming water.

51

52 Standards test -DD24 models (USA & CANADA)

The dishwashers are tested to various standards for wash performance using the parameters detailed below.

Rinse agent setting

4

Maximum place setting

10 for double models

Water softener setting

Adjust the water softener to match the water

(for DD24-Hmodels only)

hardness. Refer to the ‘Water softener’ section.

Height setting of adjustable racks

 

5½”

(140mm)

Recommended loading pattern

Top drawer

 

 

 

 

Bottom drawer

6

 

 

 

1

 

 

 

 

 

 

5

2

4

1

 

 

 

 

 

3

3

2

4

1

 

 

 

 

 

3

3

2

4

 

 

 

 

 

 

3

3

2

4

1

 

 

 

 

 

3

3

2

4

1

 

 

 

 

 

3

3

 

 

1

2

3

4

5

6

Cutlery basket

Standards test - DD36 models (USA & CANADA) 53

The dishwashers are tested to various standards for wash performance using the parameters detailed below.

Rinse agent setting

4

Maximum place setting

9

 

Base rack, folding tines, cutlery basket with cutlery

Accessories to be used in the

grid, adjustable racks, glass supports, multi-

dishwasher standards test

purpose clip. Use the multi-purposeclip to hold

 

the platter

Recommended loading pattern

 

3 glasses

4 cups under adjustable racks

6 glasses under adjustable racks

1 2 3 4 5 6

Cutlery basket

54 Standards test -DD60 models (NZ & AUSTRALIA)

The dishwashers are tested to AS/NZS 2007 standards for both wash and dry performance, using the parameters detailed below.

Wash program

Normal Eco

 

(At the end of the program, open the drawer 50 mm to

 

improve the dry performance.)

Detergent quantities

23.75g (main wash) per drawer

Rinse aid setting

4

Maximum place setting (per drawer)

7

Accessories to be used in the Dishwasher

Base rack, folding tines, spacing-adjustabletines,

standards test

cutlery basket with cutlery grid, adjustable racks,

 

glass supports.

Height setting of adjustable racks

 

140mm

Correct orientation of glass supports on both sides of drawer

Recommended loading pattern

3

1

 

 

2

 

3

1

5

4

2

4

3

1

5

4

2

5

3

1

5

4

2

 

3

1

5

4

2

 

3

1

5

4

2

 

3

1

5

4

2

 

1

2

3

4

5

Top and Bottom drawer

Cutlery basket

Standards test - DD90 models (NZ & AUSTRALIA) 55

The dishwashers are tested to AS/NZS 2007 standards for both wash and dry performance using the parameters detailed below.

 

Normal Eco

Wash programme

(At the end of the programme, open the drawer

 

50 mm to improve the dry performance.)

Detergent quantities

Rinse aid setting

Maximum place setting

Accessories to be used in the dishwasher standards test

Height setting of adjustable racks

26.25g (main wash)

4

9

Base rack, folding tines, cutlery basket with cutlery grid, adjustable racks, glass supports, multipurpose clip.

H = 125 mm for the back right-handadjustable rack

H

H = 140 mm for all the other adjustable racks

Correct orientation of glass supports on both sides of drawer

Recommended loading pattern

1 bread-and-

 

butter plate

3 glasses

 

Cutlery basket

1 saucer

3 cups + 1 glass under adjustable racks

 

5 glasses under adjustable racks

56 Standards test - DD60 models (GREAT BRITAIN & IRELAND)

The dishwashers are tested to EN50242 standards for both wash and dry performances using the parameters detailed below.

Wash program

Normal Eco

Detergent quantities

2.5g (pre-wash)per drawer

 

15.5g (main wash) per drawer

Rinse aid setting

4

Water softener setting

Adjust the water softener to match the water

 

hardness. Refer to the ‘Water softener’ and

 

‘Option adjustments’ sections.

Maximum place setting (per drawer)

6

Accessories to be used in the Dishwasher

Base rack, folding tines, spacing-adjustabletines,

standards test

cutlery basket, adjustable racks, glass supports.

Height setting of adjustable racks

 

140mm

Correct orientation of glass supports on both sides of drawer

Recommended loading pattern

8

8

 

 

7

 

 

 

 

 

 

 

 

3

 

4

5

 

 

 

 

 

 

 

 

 

3

1

4

5

2

6

 

 

 

 

 

 

 

3

1

4

5

2

 

 

 

 

 

 

 

 

3

1

4

5

2

 

 

 

 

 

 

 

 

3

1

4

5

2

 

 

 

 

 

 

 

 

3

1

4

5

2

 

 

 

 

 

 

 

 

 

1

 

 

2

1

2

3

4

5

6

7

8

small bowl

Top and Bottom drawer between Cutlery basket cutlery basket

and first soup bowl

Standards test - DD90 models (GREAT BRITAIN & IRELAND)57

The dishwashers are tested to EN50242 standards for both wash and dry performances using the parameters detailed below.

Wash programme

Normal Eco

Detergent quantities

5g (pre-wash)

 

22g (main wash)

Rinse aid setting

4

Water softener setting

Adjust the water softener to match the water

 

hardness. Refer to the ‘Water softener’ and

 

‘Option adjustments’ sections.

Maximum place setting

Accessories to be used in the dishwasher standards test

Height setting of adjustable racks

H

Correct orientation of glass supports on both sides of drawer

Recommended loading pattern

5 glasses under left-handadjustable rack

9

Base rack, ‘slide-and-fold’tines, cutlery basket with cutlery grid, adjustable racks, glass supports,multi-purposeclip.

H = 125 mm for the back right-handadjustable rack

H = 140 mm for all the other adjustable racks

cup 2 glasses

small serving bowl

cup

2 glasses

cup

1 2 3 4 5 6 7 8Cutlery basket

www.fisherpaykel.com

www.fisherpaykel.ca

www.fisherpaykel.co.nz

www.fisherpaykel.com.au

www.fisherpaykel.co.uk

www.fisherpaykel.ie

Copyright © Fisher & Paykel 2012. All rights reserved.

The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.

US CA NZ AU GB IE

F&P PN - 590199 B

09.2012